Haberkorn pirkti naudotą (4)

Būklė: naudotas, Slotting spindle 1 pc. Number of milling units 1 pc. Spindle diameter 40 mm Small window production line consisting of: ----- 1) Haberkorn FZS1 slotting machine. Price: €12,500 2) Okoma SF3F table milling machine with glazing bead saw. Price: €4,000 3) Oertli tooling for Haberkorn and Okoma machines. Price: €7,500 Timber window tool set IV 68/78/88 and one set timber-aluminum window IV 68/78, year 2011 4) Götzinger OBM Plus corner hinge & espagnolette drilling machine, hardware: Maco MultiMatic. Price: €7,000 (Hardware optionally convertible for surcharge upon request!) ----- Technical manufacturer description: - Haberkorn FZS1 slotting machine with automatic feed, - Continuously variable height adjustment, D 40 mm Cut-off saw: - Spindle arrangement: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Horizontal positioning pneumatic; manually adjustable - Guard and extraction hood with extraction port diameter: 100 mm Slotting spindle D 40 mm: - Power: 7.5 kW - Speed: 4200 rpm - Usable length: 252 mm - Max. tool diameter: 340 mm - 220 mm stroke, stepless height adjustment via precision recirculating ball screw - Guard and extraction hood with port diameter: 180 mm - Automatic brake with speed monitoring Angle table: - Swivel range: +/- 65 degrees - Programmable automatic counter block - Pneumatic clamp - Highly precise digital angle display - Automatic longitudinal compensation - Counter block always in cutting plane at any angle setting Special equipment: - Laser for workpiece positioning - Saw position pneumatic - Length stop LA 2500 mm + 1850 mm extension ----- 2) Okoma SF3F table milling machine with vertical spindle, 3 tools - Extraction connection stubs 2 x 120 mm - Spindle length: 270 mm - Opposing fence with fine adjustment and turret stop - Triple stroke, max. stroke height 90 mm - Glazing bead cut-off saw with guard and extraction hood, 80 mm blade diameter - 8-roll feed unit with stand and hold-down arm, required for setup for glazing bead cut-off saw - Pneumatic infeed device for edge gearboxes, speed 6000 rpm - 2x 3 kW motor - Tool holder diameter: 30 mm ----- 3) Oertli tooling for Haberkorn and Okoma machines - 1 set timber window IV 68/78/88 - 1 set timber-aluminum window IV 68/78 Tooling is sold in the condition, scope, and with accessories as available in our warehouse. Note on window cuts, tool drawings, tooling system lists: ENGELFRIED GmbH provides no guarantee that the actual tools correspond with the specified or drawn systems. ----- 4) Götzinger OBM Plus corner hinge and espagnolette drilling machine - Corner and scissor hinge drilling + espagnolette drilling - Vertical drilling unit with: - Quick-change drill head system - Pneumatic feed via foot switch - 1x espagnolette drill head 24 mm - 1x double corner hinge head - Hardware: Maco MultiMatic - 1x adjustable flip stop left with 6 positions - 1x adjustable flip stop right with 6 positions Fedpfxjxa Hi Ns Af Aegb - 1x complete machine stand with tray - 220/400 V, 60 Hz, 1.3 kW - 1x roller conveyor approx. 1 m long with 2 rollers - 1x roller conveyor approx. 1.5 m long with 3 rollers ----- Price of the ...

Būklė: naujas, Working length: 2451 mm Working width: 2170 mm Working height: 800–1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- Base Frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800 mm–1000 mm) - Conveyor system for timber lengths from 300 mm to 4,200 mm - Conveyor system for timber widths up to 240 mm Roller Conveyor – Infeed - Continuously driven roller conveyor, approx. 5–25 m/min - Drive via 0.37 kW geared motor, drive shaft and PU round belt - Roller diameter 50 mm, roller cover length 240 mm with PVC coating - Transfer to cross conveyor by raising/lowering the roller conveyor - Roller covers in accordance with HBG Cross Conveyor - Cross conveyor with 6 traverses - PVC-coated conveyor belts (green), 50 mm wide, guided in plastic channels - Continuously driven cross conveyor approx. 5–20 m/min - Drive via 0.37 kW geared motor - Approx. 1,750 mm from stop to stop Roller Conveyor – Outfeed - Continuously driven roller conveyor, approx. 5–25 m/min - Drive via 0.37 kW geared motor, drive shaft and PU round belt - Roller diameter 50 mm, roller cover length 240 mm with PVC coating - Transfer to cross conveyor by raising/lowering the roller conveyor - Roller covers in accordance with HBG ----- Belt Conveyor approx. 320 mm x 3,500 mm Base Frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800 mm–1000 mm) - Belt conveyor for timber lengths from 300 mm to 4,200 mm - Belt conveyor for timber widths up to 240 mm - Belt conveyor on castors with brakes Belt - Continuously driven, approx. 5–25 m/min - Drive via 0.37 kW geared motor - Belt, PVC-coated, 260 mm wide - Adjustable stops approx. 15 mm on each side ----- Control System: - Plug-and-play with its own control system and logic - Siemens PLC, 24 V DC - Siemens frequency inverter - Optical limit switches and emergency stop loop - Fully installed with 16A European plug - Connection: 400V AC, 2 kW, 50 Hz ----- Pneumatics: 6–8 bar, consumption approx. 16 NL/min Colour: RAL 7035 light grey Complies with basic EU directive 2006/42/EC in accordance with 2006/95/EC Electrical Equipment (Low Voltage Directive) and Fsdji Hmpiepfx Af Ajgb 2004/108/EC EMC Directive ----- Price for the above-mentioned specification ex works: on request! plus packaging and transport costs ----- (Technical information according to manufacturer. Subject to change and without guarantee!)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Conveyor Belts Manufacturer: Haberkorn Ulmer Year of manufacture: 2006 Equipped with 4 support legs Length: 3.0 meters Fodpfx Afsvy Ikxs Ajgb Width: 0.80 meters Height: 1.2 meters

Būklė: naudotas, Crosscut Saw 3 kW Spindle Diameter: 50 mm Spindle Length: 300 mm Number of Tool Sets: variable Control: CNC Dimensions (L x W x H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Grooving Machine FZS-2 Electronic, with stepless grooving spindles and automatic roller table ----- Crosscut Saw ----- Spindle arrangement: top Three-phase motor 3 kW Spindle diameter: 30 mm Speed: 2800 RPM Saw blade diameter: 400 mm * Automatic brake with speed monitoring * Infinitely adjustable saw positioning with Siko display * Safety and extraction hood with 100 mm diameter extraction port 2 grooving spindles, 50 mm diameter ----- Power: 2 x 7.5 kW Fjdewgwlkepfx Af Ajgb Speed: 4200 RPM Spindle diameter: 50 mm Tool diameter: approx. 360 mm Usable length: 300 mm * Both grooving spindles positionable via ball screw spindle * Freely programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm diameter extraction port * Automatic brake with speed monitoring Swivel Table ----- * Swivel range: +/- 65° * Automatically changing counter block (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Counter block in the cutting plane at every angle setting Special Equipment ----- Steplessly adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2500 mm Extraction port diameters: 2 x 180 mm for grooving spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine on request! ----- Images show the same model. Original images not yet available. (Technical data as per manufacturer's information - no guarantee!) All prices are net, plus statutory VAT.