Stromab pirkti naudotą (60)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 724, pjūklo disko skersmuo: 600 mm, stalo aukštis: 850 mm, pozicionavimo tikslumas: 0,4 mm, sukimosi greitis (maks.): 3 000 aps./min, darbinis ilgis: 8 000 mm, TECHNICAL DETAILS Saw blade diameter: 600 mm Motor power: 12.5 HP Saw blade speed: 3,000 rpm Working table height: 850 mm Extraction ports: 3 units, diameter: 100 mm Maximum working length: 8,000 mm Positioning accuracy: +/- 0.4 mm Cutting capacities Width 610 mm, height: 30 mm Width 580 mm, height: 60 mm Width 530 mm, height: 100 mm Width 490 mm, height: 120 mm Width 450 mm, height: 140 mm Width 380 mm, height: 160 mm MACHINE DETAILS Saw unit drive: hydraulic Discharge area: 4,000 x 600 mm Compressed air requirement: 7 bar Dimensions & Weight Overall dimensions of the assembled machine (L x W x H): 13,000 x 2,000 x 1,600 mm Transport dimensions (L x W x H): Machine 1,200 x 1,700 x 1,600 mm Transport dimensions (L x W x H): MATRIX pusher 8,800 x 1,500 x 1,500 mm Weight: 1,600 kg EQUIPMENT Feed system with precision rack and pinion and brushless motor Position measurement by magnetic tape Pneumatic lifting of the pusher with workpiece measuring probe Cutting cycle operation via keyboard, remotely via PC Operating software with 99 programmable cutting cycles Operating software with 1 cutting cycle for 100 programmable dimensions Cgsdpfx Afeyf Evyo Tsn Protective enclosure for the cutting area Two-hand safety control Discharge flat table

Sąlyga: geras (naudotas), Gamybos metai: 2005, pjūklo disko skersmuo: 800 mm, bendras svoris: 2 960 kg, 15 kW; 400 V; Cgsdpfoygk Haex Af Tsn

Sąlyga: naudotas, Technical data: Max saw blade diameter: 600 mm Min saw blade diameter: 590 mm Saw spindle diameter: 30 mm Pneumatic saw feed Cgjdpfx Afsri Si Ds Ten Max cutting height: 210 mm Max saw blade extension width: 500 mm 2 pneumatic clamps Extraction port diameter: 155 mm Worktable dimensions: 790 x 910 mm Power supply: 400 V Motor power: 11 kW Overall dimensions: Length: 1550 mm Width: 1550 mm Height: 2000 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 600 mm, Maitinimas: 400 V Disko skersmuo: Ø 600 mm Mašinos svoris: 1820 kg Gamybos metai: 2006 Tipas: CT 600 Variklio galia: 7,5 kW Serijos numeris: 260856 Padavimo stūmiklio matmenys (infeed): 10 300 × 2 000 × 1 250 mm Išleidimo konvejerio matmenys (outfeed): 6 300 × 800 × 1 120 mm Išleidimo stalo matmenys: 5 000 × 1 250 × 910 mm Apsisukimų greitis: apie 2600 aps./min Stalo pasukimo diapazonas: maks. ±70° Pjovimo aukštis: apie 200 mm (esant 0°) Maksimali pjovimo plotis: apie 410 mm Minimalus ruošinio matmuo: 20 × 10 mm Pozicionavimo tikslumas: ±0,4 mm Ciklo trukmė: apie 4 sek. vienam pjūviui Darbinis aukštis: 1000 mm Codpfx Ajx Nnd Ajf Tjgn Pjuvenų nutraukimo jungtys: Ø 100 mm Valdymas Beckhoff su 12 colių lietimui jautriu ekranu (Windows sąsaja), detalių 3D vizualizacija, pjovimo sąrašų importas per USB / Ethernet

Sąlyga: naujas, Touch - 7” colour display Cutting program input directly via touch screen Chalk line detection Operation according to stored program (100 program slots) 1x ejector unit (kicker) Hydraulic blade feed Machine compliant with CE standards Brake motor Safety cover on working area Including 1x TCT saw blade Saw motor power: 7.5 kW, 400 V, 50 Hz Saw blade diameter: 500 mm Feed system via toothed belt drive Cgodpfxsdify Ij Af Ten Feed speed: 120 m/min Cutting accuracy: +/- 0.8 mm Cutting capacity: up to 100 cuts/min Minimum workpiece length: 550 mm Minimum workpiece width: 40 mm Options: - Additional infeed table - Additional outfeed table - TCT saw blade, 500 mm diameter

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, Engine power: 1.5 kW Saw blade speed: 2800 rpm Saw blade diameter: 250 mm Saw blade bore: 30 mm Cutting length: 400 mm (with 20 mm workpiece thickness) Cutting length at 45 degrees: 230 mm Cutting depth: 65 mm Arm swivel lock: +/- 45 degrees Weight: 140 kg Motor protection switch Brake motor Emergency stop switch CE compliant Including dust collection hood for extraction connection, diameter 120 mm Note for used machines: • Errors in technical specifications and intermediate sale excepted. Cedpoulzchsfx Af Tegn • All prices are ex location and quoted as pickup prices – free loading! • The machines have been cleaned and function-tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and phone number!)

Sąlyga: naudotas, Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, pjovimo plotis (maks.): 610 mm, pjūklo disko skersmuo: 600 mm, įvesties srovės tipas: trifazis, - pagaminimo metai: 1997 - dvi pneumatinės užraktos TECHNINIAI PARAMETRAI: - disko skersmuo: 600 mm - maks. pjovimo plotis: 610 mm (kai elemento aukštis 30 mm) - maks. pjovimo aukštis: 160 mm (kai elemento plotis 380 mm) Cjdpfx Afex Ekmrs Tegn - variklio galia: 7,5 kW - išėjimas drožlių ištraukimui: 2 x 100 mm - dvi pneumatinės užraktos pjovimui pagal nustatytą ilgį - hidraulinis elemento prispaudimas ir disko judėjimas - sklandus pjovimo greičio reguliavimas - padavimo stalas: 1000 mm / 470 mm D-90 mm - priėmimo stalas: 1500 mm / 500 mm D-60 mm - veleno skersmuo: 30 mm - disko sukimosi greitis: 2800 aps./min Transportavimo matmenys: - 280x165x140 cm - svoris: 600 kg

Sąlyga: naudotas, "Stromab" lentų pjaustymo staklės iki mm 250, aukštis mm 100 Cgsdpfx Asrnbnksf Tsn

Sąlyga: naudotas, Gamybos metai: 2005, bendras aukštis: 1 750 mm, bendras ilgis: 1 350 mm, bendras plotis: 1 350 mm, Optimizuojanti skerspjovimo pjūklas Stromab TR 500 Matrix 4 4000 Pagaminimo metai: 2005 Variklio galia: 10 AG Automatinė stūmimo sistema Rašalinis spausdintuvas - Pagaminimo metai: 2005 - Dokumentacija prieinama: Ne - CE sertifikatas: Nėra - Serijos numeris: 250143 - Pagrindinio variklio galia [kW]: 7,5 - Didžiausias pjovimo plotis [mm]: 375 Cjdewq U Dxspfx Af Togn - Ašies pjūklo disko skersmuo [mm]: 30 - Padavimo stalo ilgis [mm]: 4300 - Išleidimo stalo ilgis [mm]: 2000 - Transportavimo matmenys: 1350mm x 1350mm x 1750mm (i x p x a) - Transportavimo paketų kiekis [vnt.]: 3 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/Diferencijuotas apmokestinimas: PVM atskaitomas verslui Pristatymas ir pramoninių įrenginių išpirkimas galimi bet kuriuo metu

Sąlyga: naujas, Gamybos metai: 2022, Naujas įrenginys Pagaminimo metai: 2022 Cgjdpekwhb Hefx Af Tjn • Hidraulinės presai skirti statybinės medienos, stalių plokščių klijavimui • Mažas užimamas plotas ir priekinis pakrovimas • Važiuoklė su ratukais, iš kurių du yra vairuojami • Aukščio reguliuojami hidrauliniai cilindrai su rankiniu valdymu – praktiški ir funkcionalūs • Vertikalūs perstumiamieji stovai su rėmo spaudimo įranga Techniniai duomenys: Darbo paviršių kiekis: 1 Naudojimo matmenys: 2500 x 1800 mm Vertikalių rankiniu būdu reguliuojamų hidraulinių cilindrų kiekis: 3 Horizontalių rankinių hidraulinių cilindrų kiekis: 2 Reguliuojamų hidraulinių cilindrų eigas: 60 mm Reguliuojamų hidraulinių cilindrų spaudimas: 1500 kg Matmenys apie 3200 x 800 x 2200 mm Vieta: Flörsheim Prieinamumas: greitai

Gamybos metai: 2000, Sąlyga: paruoštas naudoti (naudotas), Parduodama Stromab švytuoklinė pjūklas su pasukama pjūklo galva ir ritininiais takais. Variklio galia: 7,5 kW, pjūklo disko skersmuo: 600 mm, disko skylė: 20 mm, maks. pjovimo aukštis: 210 mm, maks. pjovimo ilgis: 460 mm, ištraukimo jungties skersmuo: 150 mm, kairio/dešinio ritininio tako ilgis: 2500 mm/2500 mm, ritininio tako plotis: 500 mm, svoris: apie 600 kg. Yra dokumentacija. Galima apžiūra vietoje. Codpfxjyb Scls Af Tsgn

Sąlyga: geras (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Duomenys ant tipinės lentelės Cgodsyahlgepfx Af Ten

Sąlyga: geras (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 500 mm, Pjūklas vis dar veikia, gali būti išbandytas bet kuriuo metu pagal susitarimą. Duomenys nurodyti tipo lentelėje. Cedpfx Afeyaangj Tsgn

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 600 mm, Skersinis pjūklas STROMAB TR600 Specifikacija: • Būklė - naudotas, atlikta techninė apžiūra • Gamintojas - STROMAB • Modelis - TR600 • Bendra galia - 9,2 kW • Disko skersmuo - 600 mm • Variklio veleno skersmuo - 30 mm • Variklio apsukos - 3 000 aps./min • Hidraulinis disko spaudimas ir judėjimas • Pjovimo greičio reguliavimas • Maks. pjovimo plotis - 610 mm (esant 30 mm aukščiui) • Maks. pjovimo aukštis - 160 mm (iki 380 mm pločio) • Papildomas stalas - 1 x 2,0 m • Rėmo svoris - 570 kg • Pagaminimo metai - 2001 • Ištraukimo atvamzdis - 3 x 100 mm • Įrenginys atitinka CE normas, turi apsaugas, avarinius grybukus ir dokumentaciją italų kalba Cgodpfxsx Ezmce Af Tjn • Rėmo matmenys - 130 x 145 x 135 cm (ilgis x plotis x aukštis) Papildoma informacija: • Labai gera techninė ir vizualinė būklė, originali gamintojo • Nuotraukos atitinka realią parduodamo daikto būklę • Galima vietoje įjungti ir patikrinti įrenginį

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Stromab CT600 pjūklas. 6 m padavimo stalas. Cedpfx Aoxzu U Aef Tsgn

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1500 kg Total power requirement: 10.2 kW Fully optimizing automatic cross-cut saw TR-600 MATRIX-6000 - Motor drive power: 9.2 kW - Saw blade diameter: 600 x 30 mm, Z=60 - Cutting capacity according to cutting diagram - Cutting capacity: 150 x 365 mm - Cutting capacity: 130 x 440 mm Csdpfxjv A Htkj Af Togn - Cutting capacity: 100 x 530 mm - Cutting capacity: 60 x 580 mm - Cutting capacity: 30 x 610 mm - Cutting cycle: 6 seconds - Hydraulic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 1500 kg Electrical connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x 100 mm diameter - Extraction capacity: 2400 m³/h - Air velocity at the center of the extraction port: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Max. pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and pinion and feedback via servo motor - Pneumatic lifting of the pusher at cycle end and upper return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Working surface inclination 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cut lists directly at the machine control - Up to 1000 cut lists with 10 dimensions each - One list with up to 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, and workpiece sequence) - 3 optimization options (volume, minimal waste, and priority) - Standard USB and Ethernet port - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing material of variable lengths, with single or bundle infeed - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for reading markings to ensure full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creation of cut lists at PC €360.00 - Outfeed table €360.00/m

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 0x0x0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully optimized automatic cross-cut saw TR-500 MATRIX-6000 Cgjdpev A Htdefx Af Ton - Motor drive power: 7.5 kW - Saw blade diameter: 500 x 30 mm Z=144 - Cutting capacity according to cutting diagram - Cutting capacity 135 x 280 mm - Cutting capacity 125 x 295 mm - Cutting capacity 95 x 325 mm - Cutting capacity 80 x 340 mm - Cutting capacity 55 x 360 mm - Cutting cycle: 4 seconds - Pneumatic cross-cutting unit - 8° inclined worktable - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 1000 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x diameter 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Air velocity at center of extraction port: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min. - Drive by brushless servomotor - Feed system with precision rack and pinion, measurement by servomotor - Pneumatic pusher lift at end of cycle and upper return - Photoelectric sensor for workpiece length measurement - Photoelectric sensor for defect detection - Marking with fluorescent chalk - 8° inclined working surface - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Cutting list creation directly via machine control - Up to 1000 cutting lists with 10 sizes each - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard USB and Ethernet ports - Including OPTI function for automatic measuring of the workpiece to be cut. Optimal solution for processing material with variable lengths, for single or bundle feeding - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, priority) - Including OPTI PLUS function for mark detection, enabling full optimization and removal of knots and defects - Marking with chalk Option: - Pneumatic side clamp €850.00 - Cutting list creation via PC €360.00 - Outfeed table €360.00/m

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (LxWxH): 0x0x0 mm Weight: 900 kg Total power requirement: 5 kW Automatic optimizing cross-cut saw with full optimization TR-450 MATRIX-6000 - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm - Cutting cycle time: 4 seconds - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 900 kg Cgjdpsv A Hr Tjfx Af Ten Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 2 x 100 mm diameter - Extraction performance: 2400 m³/h - Air consumption per cycle: 6 Nl - Air speed at center of extraction port: approx. 25-35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Drive via brushless servo motor - Feed system with precision rack-and-pinion and measurement via servo motor - Pneumatic lift of the pusher at cycle end and overhead return - Photoelectric sensor for workpiece length measurement - Photoelectric sensor for defect detection - Marking with fluorescent chalk - Worktable inclination 8° - Positioning tolerance +/- 0.4 mm Control: - High-resolution 12'' touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on the machine control - Up to 1000 cutting lists with 10 sizes each - Single list with 10,000 sequential sizes - 3 optimization options: maximum length, sequence, and workpiece sequence - 3 optimization options: volume, minimum waste, and priority - Standard USB and Ethernet interface - Including OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing material with variable lengths, with single or batch feeding. 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimum waste, and priority) - Including OPTI PLUS function for reading chalk markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creation of cutting lists on PC €360.00 - Outfeed table €360.00/m

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 4500x1200x1200 mm Weight: 1500 kg Total Power Requirement: 8 kW Optimizing Cross-Cut Saw WS1 - Cutting Height Pos. A: 130x175, 120x200, 100x230, 85x250, 50x280, 15x305 mm Pos. B: 100x290, 80x315, 50x340, 30x355, 15x365 mm - Cutting speed up to 100 cycles/min. - Feed speed: 120 m/min - Motor power: 7.5 kW - Voltage: 400 V / 50 Hz - Saw blade diameter: 500 mm, bore 30 mm - Speed: 3600 rpm - Min. workpiece length: 550 mm - Min. workpiece width: 40 mm - Min. workpiece height: 15 mm Cgjdpfxevz Hz Eo Af Ten - Cutting accuracy: +/- 0.8 mm - Infeed roller conveyor right, 2000 mm with double marking station - Discharge table left, 1000 mm - Extraction port diameter: 200 mm - Air consumption: 20 NL/cycle - Operating pressure: 6 bar - Working height: 930 mm - PLC control with 7” color touch screen for simple operation + fixed length cross-cut mode + sequential cross-cut mode (10 different dimensions storable) + cross-cutting of marked chalk lines + fixed length and marked chalk line cross-cutting - CE conformity - Dimensions (L=4500, W=1200, H=1200 mm) - Weight: 1500 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Total power requirement 0 kW Automatic Angle Cross-cut Saw CT-600-6000 - Hydraulic under-table circular saw unit - Drive motor power 7.5 kW - Saw blade diameter Z=48x5 600 mm - Saw blade bore diameter 30 mm - Inclined work table Yes - Automatic table rotation -70° 0° +70° - Rotation speed from/to 0°/70° 3s - Positioning accuracy +/- 0.2° - Pneumatic workpiece hold-down clamps 2 pcs - Pneumatic side aligners 2 pcs - Safety cover over crosscut unit Yes - Cutting capacity at 0°: 160 x 310 mm, 80 x 390 mm - Cutting capacity at 45°: 160 x 220 mm, 80 x 270 mm - Cutting capacity at 70°: 160 x 90 mm, 80 x 130 mm - Minimum workpiece thickness 10 mm Connection data - Supply voltage 400 V / 50 Hz - Control voltage 24 V - Compressed air consumption at 8 bar per cycle approx. 8 Nl - Extraction spigots Ø100 mm 2 pcs - Extraction spigot Ø160 mm 1 pc - Air velocity at extraction spigot center approx. 25-35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Driven by brushless servo motor Cedpfx Afjvz Eq Se Tegn - Feed system with precision rack and pinion and measurement via servo motors - Pneumatically liftable push point for passing over the workpiece in the subsequent cycle - Positioning tolerance +/- 0.4 mm Control: - Beckhoff industrial PC control with Windows CE operating system with touch screen - Data entry via keyboard, USB, or network - 5 optimization criteria: a) Maximum length, b) Minimal waste c) Part priority d) Volume e) Value - Processing individual part lists or combining orders - Graphical display of parts in process - Batch processing capability - 70 cutting lists with 21 dimensions each or one cutting list with 400 dimensions - Safety device - CE compliant - Complete safety enclosure included

Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Cutting to fixed lengths according to cut list and cropping of defects Cutting cycle: Defect cropping by chalk marking Cutting to fixed lengths, Standard and sequential cutting, Sequential cutting in marking mode. Infeed material: Variable lengths in single-piece loading WS.1 Through-feed cross-cut saw 4 pcs. lower feed rollers 1 pc. loading table 2 m right side with double marking table 1 pc. outfeed table 1 m with rear stop Roller height adjusted manually Cgsdpfxex Da Tvs Af Tsn 12 pcs. luminescent chalk Cutting capacity: Pos. A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Pos. B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control system with: 7" color touchscreen Edit cutting cycles directly at the machine Programming options: - Cropping defects by marking - Operation with cut list consisting of 10 sizes, repeat option for each size and total quantity for each size 100 memory slots for cut lists Recognition system for the last two pieces to be cut and the following piece Electronic control of the sorting unit with No. 1 ejector kicker (ejector kicker optional) Technical specifications: Feed system motorized, brushless adjustment and toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm Carbide saw blade diameter 500 mm Motor power 7.5 kW Cutting speed per minute up to No. 100 Minimum bar length 550 mm Minimum bar width 40 mm Min. workpiece thickness 15 mm Upon request: ZA295 Additional loading table with double marking table ZA110 Outfeed table ZA058 Carbide saw blade Ø 500 mm ZA296 Roller height electrically adjustable

Sąlyga: naudotas, Gamybos metai: 2021, Stalčius spaustuvas - STROMAB STC 2500 B Techninis aprašymas: • Darbo talpa: 2100 x 1000 mm • 2 darbo stotelės • Dviejų rankų saugos mygtukas • 8 pneumatiniai cilindrai, skersmuo 115 mm • Slėgis vienam cilindrui: 700 kg • 8 ketaus kampai, aukštis 170 mm Įrenginio konfigūracija: Cgjdpexg I Slsfx Af Ten • Dažnis: 50 Hz • Norma: CE • Elektros įtampa: trifazė 400 V

Sąlyga: geras (naudotas), Gamybos metai: 1999, Maximum working area: 3000 x 1600 mm Minimum working area: 390 x 420 mm Motor: 2.2 kW Weight: 1500 kg Cgsdpfx Afsg Np Rae Ton

Sąlyga: naudotas, Stromab TR350 Kappsäge IDC000098 - komplett mit Filter - mit Rollenbahnen Cgedpfx Aju Dhzisf Ton

Sąlyga: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, AUTOMATINĖ LENTŲ PJAUSTYMO STAKLĖ STROMAB MOD. TR600 – PAGAL CE STANDARTUS - Įvažiavimo ruloninis takas 2 m Cgodex Rrp Sspfx Af Ten - Išvažiavimo ruloninis takas 2 m - 3 atmušos po 250 mm - CE standartai - Metai: 2004 - Su naudojimo ir priežiūros vadovu + CE sertifikatu