Pneumatinis lašelinis pjūklas

Stromab PS600

Būklė: naudotas, Gamybos metai: 1999, pjovimo aukštis (maks.): 210 mm, pjovimo plotis (maks.): 460 mm, PNEUMATIC MITRE SAW, SWIVELLING TYPE: Brand: STROMAB Model: PS 600/P Serial Number: 990460 Year: 1999 WORKING CAPACITIES: - Maximum timber section: 210 x 460 mm (thickness x width) - Swivelling arm range (pivoting): -45° to +40° - Cutting capacity at 45° mitre: 210 x 325 mm max SPECIFICATIONS: - CE marking - Pneumatic feed for front arm - Lockable isolator, emergency stop buttons - Main power supply: 380V, 3-phase, 50 Hz - Saw motor power: 7.5 kW (10 HP) IN 16.5A - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm, Bore: Ø 30mm, Thickness: 4.2mm - Table height (working height): 880 mm - Main table in wood: 1100 x 710 mm, with 2 pneumatic clamps - Pneumatic supply: 6 bar, Estimated consumption: 28 nl - Extraction port: Ø 150 mm Recommended extraction rate: 1350 m³/h, 20m/2 Dimensions: 1700 x 1500 x h.1900 mm Nljdsrx Tatopfx Acpja Weight: 630 kg Please contact us for supply of consumables, accessories and/or dust extraction systems. Machine offered as-is, without any particular refurbishment or servicing.

Būklė: naujas, Technical data: Working width: 1100 mm Sanding belt dimensions: 1120x2150 mm Maximum working height: 160 mm Calibrating steel roller diameter: 150 mm Nlsdpfx Aogtm U Aecpoa Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Sanding belt speed: 16/18 m/s Feed motor power: 0.55 kW Variable feed belt speed: 4-20 m/min Work table motor power: 0.25 kW Pneumatic shoe, lift/lower function: YES

Gamybos metai: 2000, būklė: paruoštas naudoti (naudotas), Parduodama Stromab švytuoklinė pjūklas su pasukama pjūklo galva ir ritininiais takais. Variklio galia: 7,5 kW, pjūklo disko skersmuo: 600 mm, disko skylė: 20 mm, maks. pjovimo aukštis: 210 mm, maks. pjovimo ilgis: 460 mm, ištraukimo jungties skersmuo: 150 mm, kairio/dešinio ritininio tako ilgis: 2500 mm/2500 mm, ritininio tako plotis: 500 mm, svoris: apie 600 kg. Yra dokumentacija. Galima apžiūra vietoje. Nlsdpfsyb Sclsx Acpoa

Būklė: naujas, Gamybos metai: 2026, Technical data: • Extraction capacity ~ 5200 m³/h • Motor power 3.0 kW • Speed 3000 min⁻¹ • Voltage 400 V, 50 Hz • Extraction connection 250/200 mm • Filter area 13.7 m² • Air velocity 28 m/sec • Number of filters 28 • Dimensions 752 x 1982 x 2144 mm • Weight 300 kg • Filter category G • Filter material Polyester • Noise level 80 dB (without connection), 65 dB (when connected to the machine via a duct) Scope of delivery: • Complies with H-2 standard • Polyester filters, 5 microns Nlodpfed H Rf Tjx Acpja • 2 containers • Undercarriage • Filter cleaning with vibration system and control unit + €850 for models with fire extinguisher (Safe System)

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Nodpfx Acoqt Dmyjpsla Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Būklė: labai geros būklės (naudotas), Four-sided planer Weinig Nljdsrigxyepfx Acpea - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, RANDEK forgó keresztvágó fűrész Nljdpfxovryhge Acpea

Būklė: geras (naudotas), Gamybos metai: 1994, 2-sided planer, top and bottom Constant table height (consistent infeed height) Max. planing width: 600 mm Max. planing height: 280 mm Nljdpshuthyofx Acpja Planer heads with strip knives Immediately ready for operation

Būklė: naudotas, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of Manufacture: 1977 Drilling Capacity: 32 mm Spindle Mount: MT 3 – Short quill Distance Spindle Nose – Table: 545 mm (short quill) Distance Spindle Adapter – Table: 395 mm (MT Adapter) Throat: 290 mm Nedpfx Aceharwvjpjla Quill Stroke: 160 mm Table Size: Ø 545 mm Column Diameter: 220 mm Spindle Speed: 55 – 1,450 rpm, infinitely variable Motor Power: 1 / 1.6 kW Electrical Connection: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds, and steplessly via variator gearbox - Intermediate stage for high torque at low speeds - MT Adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swivelling drilling table - Table height adjustment via hand crank - Heavy-duty machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Required space (L x W x H): 1,150 x 650 x 2,000 mm Weight: 850 kg Good condition

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced milling unit anchored to the worktable Especially sturdy design Smooth operation due to precision assemblies and high own weight Standard with forward/reverse rotation and electronic interlock during direction change 5 speeds from 3000 to 10000 rpm Speed adjustment is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron worktable for lasting precision Easy handling thanks to controls and speed indicator on the machine front Milling fence with fine adjustment and aluminium fence jaws as standard High-performance industrial motors Equipment details: Milling fence Milling fence adjustable with crank/handwheel from the front panel With digital readout Quick-change spindle MK 4 quick-change spindle system standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved milling guard Forward/reverse spindle rotation MK 4 quick-change spindle Nlsdpfjdqzcxjx Acpoa Milling fence adjustable with crank/handwheel from the front panel with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length Ø 30-35 mm: 140 mm Usable spindle length Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool diameter for profiling: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle diameter at fence: 1 x 120 mm Extraction nozzle diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -