Vakuuminių keltuvų su ramstis strėlės kranas

Barbaric Uniwood B3 90 - 250 + SSK 250

Būklė: naujas, Gamybos metai: 2026, Construction size: 6 Nominal heat output: 170 kW -- Complies with BImSchV Stage 2 and CE standards -- Combustion chamber fully lined with fireclay For rooms up to: 4,800 m³ (according to DIN) Fuel types: firewood, chipboard, wood chips, briquetted wood chips Fuel consumption: 40 - 50 kg/h Blower air output (free-blowing): 14,000 m³/h Outlet opening: Ø 700 mm Flue pipe connection: Ø 220 mm Weight: 2,150 kg SPS control cabinet: 380 Volts Hsdpedlhdbefx Ag Ejnp

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Schiavo Hydro 3000.6 Vertical Glass Washing Machine with Pre-wash Zone, Main Washing Zone and Drying Zone Wet area constructed predominantly from stainless steel and moisture-resistant materials. 150 mm single-piece washing brushes with stainless steel core Includes water tanks for water treatment Includes fan for glass drying Discharge area with inspection lamps Processing dimensions: Max. glass height: 3000 mm Hsdpfx Agowd N Urs Esnp Glass thickness: 3-22 mm Brushes: 6 units Connected load: 22 kW

Būklė: naujas, Vacuum Lifter BARBARIC B3, pivotable, incl. crane - Demonstration unit - Hnedsu R Szaopfx Ag Eep Included: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg capacity Vertical and horizontal handling of flat, standard commercial boards (laminated boards, natural wood boards) up to a board size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilt mechanism - Complete version with hoist and appropriate safety devices (vacuum gauge and hand-operated slide valve with mechanical lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable beam (beam length: 1,500 mm) Included: - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction pads, 500 x 250 mm, on an adjustable beam (beam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version enables lifting of materials up to 250 kg. Included: - Option: BARBARIC uniWood comfort control All controls for the hoist and the vacuum lifter are combined in a single control unit—our special handling grip. This allows single-handed operation of the system and the load. The lifting process can be continuously regulated via frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum gauge and two-button safety control for load release). Included: - BARBARIC column-mounted slewing crane Load capacity at hoisting device: 250 kg The specified capacity refers to the effective load at the hoist. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consisting of column, console, and low-friction jib arm. Manual slewing and trolley travel. A suitable reinforced concrete floor (C20/R5, min. 20 cm) is required for installation. The static assessment of the floor must be provided and documented by the client. For installation on cracked concrete or ground with low load-bearing capacity, larger base plates are available upon request. Mounting: supplied with adhesive anchors for concrete floor. If ordered without hoist, please specify the desired cable or hose arrangement! Delivery includes: trolley, power supply, and compressed air connection. - New exhibition machine -

Būklė: naudotas, LOSER MODEL AA220 DOWEL TRIMMER / TENON CUTTER - USED - Capacity: 7500/1500 dowels per hour Hnedpfx Agoqpdkcs Eop - Dowel diameter capacity: 6-18 mm

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: MBHF-KBK1, DEMAG KBK Crane Ceiling Crane Runway, dimensions approx. 12m x 3.5m Other dimensions available on request! Load capacity / lifting capacity: 125 KG - 0.125 t Technical data of the system: - Crane runway made from Demag KBK1 rails System is delivered complete: - KBK rails, rail connectors, traveling gears, end plates, cable trolley, power supply, supports/hangers, etc. Includes 1 bridge with 125 KG Demag DC-COM chain hoist Hedspiarnopfx Ag Ejnp Crane is dismantled and available immediately Very good used condition, see pictures Item location: 75053 Gondelsheim Dispatch by freight or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacity 125KG - 1600KG Please inquire about your crane runway with required load moment and dimensions.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced milling unit anchored to the worktable Especially sturdy design Smooth operation due to precision assemblies and high own weight Standard with forward/reverse rotation and electronic interlock during direction change 5 speeds from 3000 to 10000 rpm Speed adjustment is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron worktable for lasting precision Easy handling thanks to controls and speed indicator on the machine front Milling fence with fine adjustment and aluminium fence jaws as standard High-performance industrial motors Equipment details: Milling fence Milling fence adjustable with crank/handwheel from the front panel With digital readout Quick-change spindle MK 4 quick-change spindle system standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved milling guard Forward/reverse spindle rotation MK 4 quick-change spindle Milling fence adjustable with crank/handwheel from the front panel with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length Ø 30-35 mm: 140 mm Usable spindle length Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Hnodpfxjdqzcxj Ag Ejp Max. tool diameter for profiling: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle diameter at fence: 1 x 120 mm Extraction nozzle diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -

Būklė: naudotas, Įtrūkinimų velenas – 1 vnt. Frezavimo agregatų skaičius – 4 vnt. Veleno skersmuo – 50 mm „Weinig Unicontrol 6“ langų apdirbimo centras ----- Parduodama kliento pavedimu Gamintojo aprašymas: Skirta atskirų dalių, elementų ir mažų serijų gamybai. Veleno išdėstymas: Viena skersavimo pjūklas, vienpusis spenelio ir įtrūkinimų velenas, vienas dešinysis profiliavimo velenas, spenelio-įtrūkinimų velenas ir profiliavimo velenas, skirtas montuoti kelis įrankius vienas virš kito, su pneumatiniu veleno judėjimu. Įtrūkinimų stalas su motorizuotu stalo judėjimu ir automatiniu perdavimu į nuolatinį, be grandinės esantį guminį ritininį profiliavimo įrenginio posūkius, posūkių aukščio reguliavimas rankiniu būdu. Dirbinio fiksavimas naudojant 2 pneumatinius tvirtinimo cilindrus. Ilgio sustabdymas su skale ir didinamuoju stiklu, skirtas rėmų arba sparnų išoriniam matmeniui. Įrankių padėčių valdymas (išilginis ir skersinis apdirbimas) per pasirinkimo jungiklį valdymo pultyje. Techniniai duomenys ----- Skersavimo pjūklas ----- Įrankių skaičius: 1 Veleno greitis: 2 800 aps./min. Veleno skersmuo: 40 mm Maksimalus įrankio skersmuo: 350 mm Variklis: 3 kW Spenelio ir įtrūkinimų velenas ----- Įrankių skaičius: 3/4 vnt. medienai, kurios storis yra IV 68–IV 92 Veleno greitis 3 500 aps./min. Veleno skersmuo 50 mm Įrankio tvirtinimo ilgis 320 mm Maksimalus įrankio skersmuo 320 mm Variklis 11 kW Profiliavimo velenas ----- Įrankių skaičius: 3/4 vnt. medienai, kurios storis yra IV 68–IV 92 Veleno greitis 6 000 aps./min. Veleno skersmuo 50 mm Įrankio tvirtinimo ilgis 320 mm Maksimalus įrankio skersmuo 232 mm Variklis 11 kW Speciali įranga: Sinchroninis velenas ----- pneumatiškai reguliuojamas judėjimas pirmyn ir atgal, skirtas profiliuoti langų sparnus, rėmus ir duris be atšokimų. Veleno skersmuo 50 mm, 4 kW Įrankio tvirtinimo ilgis 120 mm, įrankio nulio skersmuo 112–140 mm, maksimalus įrankio skersmuo 232 mm, veleno greitis 6 000 aps./min. Padidinta variklio galia sinchroniniam velenui nuo 4 kW iki 7,5 kW Ekraninis valdymas 99 langų tipams, 1 tipas gali turėti iki 8 skirtingų dalių, kurių kiekviena turi po 2 galinius profilius ir 2 išilginius profilius. Gamybos galimybės: atskiros dalys, dvigubos dalys, rėmais, serijomis. Profilių apdirbimas. Duomenų įvedimas per klaviatūrą su integruotu vartotojo sąsaja ir klaidų diagnostika. 1 įtrūkinimų velenas iš viršaus ----- Variklio galia: 2,2 kW Greitis: 6 000 aps./min. Veleno skersmuo: 40 mm, su pleištu 10 x 4 mm Tvirtinimo ilgis: 13 mm Tvirtinimo ilgis: 40 mm Ašinis poslinkis – 2 padėtys Radialinis poslinkis – 2 padėtys Maksimalus įrankio skersmuo 130 mm Padidinta įtrūkinimų veleno variklio galia nuo 2,2 iki 3 kW 1 apdirbimo vienetas, skirtas įmontuoti furnitūros griovelį, dešinėje: ----- Skirta įmontuoti furnitūros grioveliui apdirbimo etapu arba grioveliui išilginiame profilyje. Pneumatinis horizontalus judėjimas su pasirinkimo jungikliu valdymo pulte. Variklio galia: 2,2 kW Hodpfxsx Tu N Hs Ag Ejnp Greitis: 6 000 aps./min. Veleno skersmuo: 40 mm Tvirtinimo aukštis: 125 mm Įrankio skerspjūvio spindulys: min. 140 mm, maks. 180 mm Pagrindinė padėtis žemiau stalo lygio: 10 mm Apdirbimo įrenginys, skirtas furnitūrai, speciali versija: Tvirtinimo ilgis 150 mm Ašinis poslinkis 80 mm, 3 padėtys 3 įrankiai Radialinis poslinkis, 2 padėtys Padidinta apdirbimo veleno variklio galia, skirtas furnitūrai, nuo 2,2 iki 3 kW Apdirbimo velenas, skirtas furnitūrai, 230 mm įrankio skersmeniui, ant ir virš stalo Elektrinis posūkių aukščio reguliav

Būklė: beveik kaip naujas (naudotas), Arbeitsbreite 1350 mm Hnjdpfsuuitgjx Ag Esp Die Maschine befindet sich, wie auf den Bildern zu sehen, in einem ausgezeichneten, neuwertigen Zustand.

Gamybos metai: 2001, būklė: beveik kaip naujas (naudotas), Double-belt sander, two lower sanding heads, each with a main motor of 2 x 7.5 kW, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished. The conveyor belt is in very good condition. The graphite shoe is new. The machine features two lower units: the first is a rubber contact roller, and the second is a combination unit with a graphite shoe. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation system. Pneumatic belt tensioning. Sanding belt speed is 18 m/s. Conveyor belt feed speed is 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Rated total power: 21 kW. Maximum workpiece height: 160 mm. The machine is equipped with two lower working rollers. The conveyor belt operates from above. Hedpfx Agofxpbme Eonp

Būklė: naujas, Typ: SK-1000-P6 Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe: 2–150 mm Polierwalzengeschwindigkeit: frequenzgeregelt Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtanschlussleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Hodpfjdmi Nisx Ag Ejnp Querwalzenmotor: 1,5 kW × 1 Schraubwalzenmotor: 2,2 kW × 2 Vorschubmotor: 2,2 kW Hubmotor (oben/unten): 0,37 kW × 4 Schenkelschwenkmotor: 0,37 kW × 2 Arbeitstisch-Hub: 0,55 kW Transportabmessungen (L×B×H): 3650×1850×2100 mm Gewicht: 4200 kg