Pet Buteliai Kelių pirkti naudotą (3 782)

Sąlyga: naudotas, Gamybos metai: 2008, Overview This complete bottling line was last used for filling spirits and includes a vacuum filler with screw capper, a conveyor belt, a labeller, as well as a printing and inkjet system. The line achieves a maximum output of 1,500 bottles per hour and handles 700 ml and 1,000 ml bottles. Technical details Output: 1,500 bottles/hour Included formats: 700 ml, 1,000 ml Last used for: Spirits Scope of delivery Infeed table Vacuum filler & screw capper | Toscana Enologica | Monomatic TS | 2008 Conveyor belt (single-lane) | Krones Labeller | Enos | T3 | 2017 Inkjet printer | Makroprint | X1 Jet | - Inkjet system | Linx | 5900 | - Hnsdpfx Afjvzymhs Ijg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1100026, veleno greitis (maks.): 3 000 aps./min, X ašies eiga: 160 mm, Z ašies eigos atstumas: 500 mm, sukimosi greitis (maks.): 4 500 aps./min, įrankių magazino lizdų skaičius: 19, Machine has been professionally cleaned. TECHNICAL DETAILS Hnjdpfx Aowr Ducjf Ieg Control: Siemens 840D Spindle Technology: Belt-driven spindle Spindle bore: 51 mm Speed: 4,500 rpm Workpiece clamping: Collet chuck, Hainbuch size 65 Tool Carrier I (XZ) Technology: Cross slide, 4 units Travel in X: 70 mm Travel in Z: 115 mm Tool holder: Turning tools Tool Carrier II (X/Z) Technology: Turret with 7 stations and pick-off spindle Tool holder: VDI30 Driven tools: 3,000 rpm Workpiece clamping, pick-off spindle: Collet chuck Travel in X: 160 mm Travel in Z: 500 mm Tool Carrier III Technology: Turret with 8 stations Tool holder: VDI30 EQUIPMENT - Chip conveyor - Coolant management with coolant pumps - Bar feeder, Gucchi Giovanni DB Evo - Collection tray with conveyor belt - Mechanically prepared interface for oil mist extraction - Electronic handwheel for setup operation - Clamping devices and tool holders are not included in the scope of delivery.

Sąlyga: paruoštas naudoti (naudotas), Measuring dimensions X/Y/Z: 610mm/610mm/200mm, Resolution: 0.1µm, Measuring speed: 250mm/s, Measurement type: multisensor (video, laser, mechanical touch probe), Software: OptiCheck 3D 4.5 (MahrVision 3D), Probe system: TP200. 3x servo amplifiers, X and Y axis motors have been newly purchased. The machine was calibrated in December 2023. The machine produces an electrical humming noise, which originates from the servo amplifier board. Documentation is available. On-site inspection is possible. Hodsun Stispfx Af Ieng

Sąlyga: naudotas, Gamybos metai: 2001, PET bottling line by KHS Machine (add-ons): with de- and palletizing systems Output for 1 liter format: 24,000 bottles/hour Formats: 0.5 L and 1 L PET bottles Hodpovu Tufofx Af Ieng Features: depalletizer, air conveyor, rinser, filler incl. height inspection, mixer, packer, crate washer, palletizer

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 232, rida: 227 150 km, galia: 155 kW (210,74 AG), pirmoji registracija: 03/1996, kuro tipas: dyzelinas, bendras svoris: 18 000 kg, padangos dydis: 295/80 r 22,5, ašių konfigūracija: 2 ašys, ratų bazė: 3 600 mm, stabdžiai: variklio stabdymas, spalva: oranžinė, vairuotojo kabina: dieninė kabina, pavaros tipas: mechaninis, emisijos klasė: euro2, pakaba: plienas, Įranga: ABS, diferencialo užraktas, hidraulika,

Sąlyga: naudotas, Gamybos metai: 1995, Technical Details: Number of spindles: 6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Model: SFH130Dnt Year of construction: 1995 Six-spindle automatic lathe 6 main spindles with collet chucks Hnjdpfx Afjw Hbz Ae Isg Control: Siemens S7-200 PLC Dnt drive Loading & unloading at station 6 Auxiliary cooling pump with magnetic cartridge filter Please contact us for further information and photos via email (at) or *

Sąlyga: naudotas, Gamybos metai: 2013, Summary This complete filling line consists of the machines listed below. It was decommissioned in 2024 and is immediately available. Thanks to regular maintenance and several upgrades, even the older machines in this line are in good technical condition and spare parts availability is ensured. Details PET line up to 30,000 bph in 1.5 L. Neck finish 29/25 Line comprising: Preform rinser Krones, 2016 Blower Sidel, 2002 Filling machine Gangloff Scoma, 2013 Capper, 2013 Caps Sidel, 2013 Inspector Heuft, 2001 CIP Sovotec, 2011 Pallet conveyor, 2013 Inspector Krones, 2013 Labeller Krones, 2006 Bottle coder Domino, 2014 Shrink film packing machine Ocme, 2013 Handle applicator Twinpack, 2012 Conveyors NTS, 1997/ completely overhauled 2012 Bottle conveyor Gebo, 1997/ completely overhauled 2012 Accumulation table, 2013 Palletiser Ocme, 2014 Pack labeller, 2011 Pack labeller 2, 2011 Conveyor packs and divider SES, 2003 Film Aetna, 2014 Film Aetna, 2014 Pack lift Ambaflex, 2013 Hjdevuqtlopfx Af Iong

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 5318, veleno skylė: 26 mm, veleno greitis (maks.): 4 750 aps./min, TECHNICAL DETAILS Max. round diameter: 26 mm Max. square dimensions: 18 mm Max. hexagon dimensions: 22 mm Hsdewtq Urepfx Af Ieng Spindle power: 2.2 kW Number of spindles: 4 Spindle bore: 26 mm Speeds: 1,180 - 4,750 rpm Tool holder: 6 slots MACHINE DETAILS Length (L – R): 1,800 mm Width (F – B): 1,000 mm Height: 1,400 mm Weight: 800 kg Total power: 3.2 kW Operating voltage: 380 V 50 Hz

Gamybos metai: 2002, Sąlyga: paruoštas naudoti (naudotas), A CNC multi-spindle lathe from Index, comprehensively overhauled in 2020, is available. Number of spindles: 6, maximum bar capacity: 32 mm, spindle speed: 6,300 rpm, weight: approx. 10,800 kg, control system: Siemens Sinumerik. Bearing condition measurement 2024 - HS1: 14.35, HS2: 15.45, HS3: 10.37, HS4: 11.16, HS5: 17.44, HS6: 7.54. Extensive refurbishment works have been carried out on the machine, including the spindles, cooling system, bearings, hydraulic lines, etc. Documentation is available. On-site inspection is possible. Hodpowr Dw Rjfx Af Isng

Sąlyga: naudotas, Gamybos metai: 2005, Capacity bottle filler: 10,000 PET bottles/hour with 485 ml bottles Hodpfevcqq Hjx Af Ieng Equipment: open infeed hopper, closed container with unscrambling carousel, format sets for 500 g and 285 g PET bottles

Sąlyga: naudotas, Gamybos metai: 2019, Number of spindles: 8 Bar capacity: 36 mm Control: FANUC 30i-B Counter-spindle speed: 7,500 rpm Multi-spindle bar automatic lathe | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar loader and coolant system. The machine has only 15,666 operating hours (spindle hours). Hnedpfxswgi D Es Af Isg The machine is in very good condition and can be inspected under power. Please refer to the original order confirmation attached to the offer for further equipment details of this machine. The machine operates with an EGS loading system -> This can be purchased separately. A comprehensive tooling package is included in the scope of delivery. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Sąlyga: naudotas, Gamybos metai: 1993, Technical Details: Hsdpfxsrgt E Rj Af Ieng Number of spindles: 8 Spindle bore: 32 mm Item: Cam-controlled multi-spindle automatic lathe Make: Schütte Model: AF32 Dnt Year of manufacture: 1993 Eight-spindle automatic lathe 8 main spindles Max. nominal bore D=32mm Upgraded control system: Siemens Sinumerik Motors: renewed modern motors suitable for the upgraded control system Electronic cam controller: Balluff CNC cross slide, position 5 (transverse) CNC cross slide, position 6 (transverse) Prepared for gripper at position 8 (gripper optional) Independent feeds Thread-cutting clutches Integrated bar loader: Pietro CUCCHI; Type: magazine loader Please contact us for further information and photos via mail(at) or

Sąlyga: naudotas, Gamybos metai: 2016, Overview The filling line for glass bottles (single-use and returnable) was in operation until recently at a small brewery in Germany. The system is designed for 0.33l longneck bottles and can fill up to 2,500 bottles per hour. The machine is still in operation and can be inspected by appointment at any time. The bottle washer and depacker can also be purchased separately. Technical Details Capacity: 2,500 bph Formats: Set up for 0.33l longneck Filling temperature: 6°C Packaging: - 0.33l longneck in 24-unit folding cartons - 0.33l longneck in 24-unit modular crates Individual Machines / System Components - New glass depalletizer | Füllmeister | - | 2016 - Filler + Capper | H&K | VVF 14/3 | 1966 2016 major overhaul: with pre-evacuation, new rotary joint, new stainless steel table, new electrical system, new stainless steel control cabinet for the valves, 0.33 liter bottle guide set, Sihi vacuum pump, seals for lift cylinders and filling valves replaced in 2023, vacuum and overpressure valves fitted with new seals and springs in 2023 - Bottle Depacker | Joha | - | 1982 Pack head for 24 bottles in modular crate - Bottle Washer | Silmo | Praktika | 1983 Bottles per row: 12 - Labelling unit | Krones | Vinetta | 1999 Type 480-6-3-180 Hnsdpfx Ael Hx Rpjf Ijg Labelling stations for back labels, front and neck ribbons, each with three glue pallets and gripper sponges, glue pallets, gripper sponges, and sponge roller at the bottle outfeed replaced new in 2023, glue pump Krones Unipump-H with glue heater - Packer | Pexco | - | - 1 head for 24 bottles in modular crates; new electrical system installed and machine overhauled in 2016 - Residual liquid and mouth control | Miho | LC2000 | Residual caustic detection from bottle washer, control of bottle mouth for crown caps/metal, incl. Silmo inspection screen for visual inspection of cleaned bottles - Crate Washer | Fleischer | - | - For cleaning empty plastic crates via in-line process, module size: 300x400mm, overhauled in 2016 - Compressor | Alup | Allegro 19-10 | 2016 Oil-free, 4,897 operating hours Transport - Bottle transport: various conveyor belts + 90° bends - Crate transport / roller conveyor: overhauled in 2016 with stainless steel side rails and legs

Sąlyga: naudotas, Gamybos metai: 2019, Number of spindles: 8 Bar capacity: 36 mm Control unit: FANUC 30i-B Counter-spindle speed: 7,500 rpm Multi-spindle automatic lathe | DMG GILDEMEISTER - MULTISPRINT 36, equipped with bar loader and coolant system. The machine has only 15,650 spindle hours. The machine is in very good condition and can be inspected under power. Hnedpfx Afewf D S Is Ijg For further equipment details, please refer to the original order confirmation included with the offer. The machine operates with an EGS loading system -> This can be purchased separately. A comprehensive tooling package is included in the scope of delivery. ----- #Tags: MULTISPRINT36 | MULTISPRINT-36

Sąlyga: naudotas, Gamybos metai: 1991, Technical details: Number of spindles: 6 Spindle bore: 16 mm Item: Cam-controlled multi-spindle automatic lathe Brand: Tornos Model: SAS16-DC Year of manufacture: 1991 Six-spindle automatic lathe with 6 main spindles Max. nominal bar capacity: D = 16 mm Including bar loader IEMCA PRA 40/38F For further information and images, please contact us via email (at) or Hnodpfx Asw Dqlxjf Ieg *

Sąlyga: naudotas, Gamybos metai: 2012, Overview The complete filling line for large PET bottles is located in a mineral water plant and was previously used for bottling still water. The line has been regularly maintained and is in excellent condition. All machines are from 2012 and have only approximately 20,000 operating hours. Capacity: 4,200 bottles/hour at 5.0L formats Formats: 2.5L and 5.0L Closure: 38mm plastic screw cap Label: Hotmelt Hnodpfx Afstr R Tko Isg List of Machines - Stretch Blow Molder | Sidel | SBO 3 Compact | 2012 - Preform Tipper || 2012 - Preform Feeding and Loading || 2012 - Air Conveyor | NTS || 2012 - Rinser, Filler, Capper | Gallardo | 12-18-4 | 2012 - Handle Applicator | And & Or || 2012 - Labelling Machine | Makro | MHK23P UHM1L1 CE | 2012 - Line Divider | Emebe || 2012 - Shrink Packer | KHS | Innopack Kisters SP | 2012 - Carry Handle Applicator | Project AE | Progrip 550 | 2012

Sąlyga: naudotas, Gamybos metai: 2021, Number of spindles: 8 Bar capacity: 36 mm Control: FANUC 30i-B Counter-spindle speed: 7,500 rpm Multi-spindle bar automatic lathe | DMG GILDEMEISTER - MULTISPRINT 36, equipped with bar loader and coolant system. The machine has only 6,944 spindle hours. The machine is in very good condition and can be inspected under power. For further equipment details, please refer to the original order confirmation attached to the offer. The machine operates with an EGS loading system -> Hnjdpfewf D Szex Af Ijg This can be purchased separately. An extensive tooling package is included in the scope of delivery. A machine video from the factory location is available upon request. #Tags: MULTISPRINT36 | MULTISPRINT-36

Sąlyga: naudotas, Gamybos metai: 1999, Technical details: Number of spindles: 6 Spindle bore: 16 mm Item: Cam-controlled multi-spindle automatic lathe Manufacturer: Tornos Model: SAS16.6 Year of manufacture: 1999 Six-spindle automatic lathe with 6 main spindles Hjdpfx Aow Dqmpjf Ieng max. nominal bar capacity D=16mm including bar loader IEMCA PRA 40/33F Please contact us for further information and photos via email (at) or

Sąlyga: naudotas, Gamybos metai: 2019, Article: CNC multi-spindle automatic lathe Manufacturer: Tornos Model: MultiSwiss 8x26 Year of manufacture: 2019 Full cross-slide configuration, sub-spindle, Hsdpfx Afoldk R He Ieng workpiece feeder, 2 driven tools, 1 fixed backworking station, 1 driven backworking station, 2x 80 bar high-pressure pumps Optional: HandlingTech loading robot The scope of tool equipment supply may differ from that shown in the images. Please contact us for further information and additional photos.

Sąlyga: naudotas, Gamybos metai: 2016, Article: CNC Multi-spindle Lathe Make: Tornos Model: MultiSwiss 8x26 Hnjdpfx Afsldk R Ro Isg Year of Manufacture: 2016 Full cross-slide configuration Subspindle Workpiece puller device 2 x driven tools 3 x Y-axes 1 fixed back-working station 1 x driven back-working station 2 x 80 bar high-pressure pumps Optional: loading robot, make HandlingTech The scope of tool equipment supplied may differ from what is shown in the pictures. Please contact us for further information and images via or

Sąlyga: naudotas, Gamybos metai: 1987, Technical details: Number of spindles: 8 Spindle passage: 51 mm Item: Multi-spindle automatic lathe Manufacturer: Schütte Model: AF51 Year of manufacture: 1987 Six-spindle automatic lathe 8 main spindles Max. nominal passage D=51mm Control: SIEMENS SIMATIC S5 Gripper in position 7 for rear-side machining Thread cutting drive Independent feed in positions 2/3 Electronic cam switch Balluff Plain text display Wöhrle Coolant auxiliary pump Hnedpfxeiay Sfo Af Isg Magnetic cartridge filter Oil operation Including loading magazine IEMCA PRA40/37/F, year 1987 (bundle loader) Painted in light blue and light grey Tool configuration may differ from the illustrations. Please contact us for more information and photos via email (at) or *

Sąlyga: naudotas, Gamybos metai: 2002, Technical details: Number of spindles: 8 Spindle bore: 20 mm Item: Cam-controlled multi-spindle automatic lathe Brand: Schütte Model: AG20 Year of manufacture: 2002 Eight-spindle automatic lathe 8 main spindles Max. nominal bore: D=20mm Control: Siemens 840D Hsdpewutgaofx Af Ijng 1x Multi-form/Thread milling unit (new 2011) 1x Multi-form/Thread milling unit for long turning (new 2011) 1x Thread cutting/High-speed drilling spindle (new 2011) 1x Pick-off device incl. various gripper collets 4 CNC cross slides Double cross slide at position 7 Bar loader PRA 52/P Type 33 (bar length 3m), year 2004 High-pressure unit Knoll SF 2000/Turbo-3 up to 100 bar, year 2004 Tool monitoring: Brankamp Rittal cooling unit in front control cabinet Incl. spare parts package with various clamping devices, cams, and various tool holders for longitudinal and cross slides The machine has been operated with oil and has processed brass Please contact us for further information and photos via mail(at) or *

Sąlyga: naudotas, Gamybos metai: 1991, Technical details: Number of spindles: 6 Spindle bore: 51 mm Hjdpfxel Rmqpo Af Iong Schütte SF51 DNT, year of manufacture 1987, our ID #61868 Item: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Model: SF51 DNT Year of manufacture: 1987 Six-spindle automatic lathe with 6 main spindles Max. nominal bar capacity D = 51 mm Electronic cam controller Balluff Gripper in position 6 for rear-side machining, sorting chute Independent longitudinal feed in position 5 Screw-type chip conveyor Thread-cutting clutches Interface for: bar loader IEMCA PRA Bar feeder IEMCA PRA40/33/F Scope of delivery excludes the blue chip conveyor The tooling equipment delivered may differ from that shown! Please contact us for further information and pictures via mail(at) or

Sąlyga: naudotas, Gamybos metai: 1994, Technical Details: Number of spindles: 8 Spindle bore: 32 mm Item: cam-controlled multi-spindle automatic lathe Brand: Schütte Model: AF32 S DNT Year of manufacture: 1994 Eight-spindle automatic lathe with 8 main spindles Max. nominal through-bore D=32mm Control: Siemens SIMATIC S7 electronic cam switchgear Balluff Gripper at station 8 for rear-side machining CNC cross-slide at position 6 CNC cross-slide at position 7 Workpiece conveyor belt Coolant system Schimpke Chip conveyor with magnetic separator Thread-cutting clutches Displayed tool equipment may differ from delivery scope! Please contact us for further information and images via mail(at) or Hnodpfxjl Su Rxo Af Ieg *

Sąlyga: naudotas, Gamybos metai: 1999, Technical details: Number of spindles: 6 Item: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Model: SG18 Hnjdpfow Hb Trox Af Iog Year of manufacture: 1999 Six-spindle automatic lathe 6 main spindles as collet chuck automatic Control: Siemens S7-200 PLC Loading & unloading at station 6 Spindle brake Please contact us for further information and photos via email (at) or