Pet Buteliai Kelių pirkti naudotą (4 123)

Sąlyga: geras (naudotas), Multipack-maskine Cama MP135 Cama MP 135 automatiske multipack-maskiner til emballering af beholdere i omsluttende kartonærmer. Eksempel på kapacitet: 100 g flødeost, Ø84 x 61,5 mm / 90 styk/minut Dkodpfx Afol Ayhxs Heu Dokumentation kan fremlægges. For yderligere billeder, kontakt os venligst.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1100026, veleno greitis (maks.): 3 000 aps./min, X ašies eiga: 160 mm, Z ašies eigos atstumas: 500 mm, sukimosi greitis (maks.): 4 500 aps./min, įrankių magazino lizdų skaičius: 19, Machine has been professionally cleaned. TECHNICAL DETAILS Control: Siemens 840D Spindle Technology: Belt-driven spindle Spindle bore: 51 mm Speed: 4,500 rpm Workpiece clamping: Collet chuck, Hainbuch size 65 Tool Carrier I (XZ) Technology: Cross slide, 4 units Travel in X: 70 mm Travel in Z: 115 mm Tool holder: Turning tools Tool Carrier II (X/Z) Dkodjwr Ducepfx Af Hsu Technology: Turret with 7 stations and pick-off spindle Tool holder: VDI30 Driven tools: 3,000 rpm Workpiece clamping, pick-off spindle: Collet chuck Travel in X: 160 mm Travel in Z: 500 mm Tool Carrier III Technology: Turret with 8 stations Tool holder: VDI30 EQUIPMENT - Chip conveyor - Coolant management with coolant pumps - Bar feeder, Gucchi Giovanni DB Evo - Collection tray with conveyor belt - Mechanically prepared interface for oil mist extraction - Electronic handwheel for setup operation - Clamping devices and tool holders are not included in the scope of delivery.

Sąlyga: naudotas, Gamybos metai: 2000, Overview This complete PET bottling line was manufactured between 2000 and 2012 by renowned European producers. The plant is suitable for still and carbonated soft drinks and comprises a stretch blow-moulding machine with compressed air generator, rinser/filler/capper, labeller, packer, palletizer, wrapper, conveyor belts, inspection systems, mixing and CIP unit. The line achieves an output of up to 8,000 bottles/h at 1.5 L and is immediately available. All equipment has been well maintained and comes with original components and the corresponding peripheral devices. Technical Data Output: 8,000 bottles/h at 1.5 L Formats: 0.5 L and 1.5 L bottles Products: Water and carbonated soft drinks Closure system: Plastic screw caps, sport caps Packaging: Shrink wrapping: 3x2 formation for 0.5 L and 1.5 L PET bottles Pallet type: Euro (1,200 x 800 mm); Düsseldorf (600 x 800 mm) Scope of Delivery - Stretch blow-moulding machine: SIPA, year 2002 - Compressed air generator: Kaeser, year 2002 - Rinser/Filler/Capper: Procomac, year 2000 - Number of rinsing nozzles: 24 Dkjdowq Sfgjpfx Af Hju - Number of filling valves: 24 - Number of capping heads: 6 - Labelling machine: Futura, year 2000 (for hot-melt wrap-around labelling) - Inspection device: Logics & Controls, year 2000 (checks fill level, closures and labels) - Shrink wrapper: Krones TFS Variopack, year 2001 - Handle applicator: Twinpack, year 2001 - Tray labeller: Logopack, year 2001 - Pallet stretch wrapper: Born, year 2001 - Palletizing system: Levanti / Profipack - CIP unit: Corosys, year 2012 - CO2 degassing unit: Corosys, year 2012

Gamybos metai: 2022, Sąlyga: naujas, DUPATECH R/A/PET SHEET LINE - New. Further specifications can be found below. Machine type: Extruder - Sheet Line Brand: Dupatech Model: R/A PET (Mono or Multilayer) Year of manufacture: NEW Dkjdpfx Ash E A Tcof Heu Output (kg/h): 200 - 1000 Energy consumption: 0.33 kWh/kg.h Sheet width: 500 mm - 1500 mm Sheet thickness: 0.2 mm - 1.5 mm If you have any questions about the machine, please feel free to contact us at any time.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 3500 x 2300 x 1780 mm Weight: 4000 kg Total power requirement: 27.2 kW CNC Multi-Spindle Drilling Machine MBL-2500 - Maximum distance between holes: 2500 mm x 1200 mm - Maximum workpiece length: 2500 mm - Minimum / maximum workpiece thickness: 8–30 mm - Maximum drill diameter: 12 mm (single) Dkodpfx Asvz Hrdef Heu - Maximum drilling depth: 50 mm - Drill shank diameter: 10 mm - Tool length: 57 mm / 70 mm - Number of drilling spindles: 160 pcs - Spindle speed: 3600 rpm - Air pressure: 0.5 – 0.6 MPa - Voltage: 400 V / 50 Hz - Total motor output: 27.2 kW - Dimensions (L = 3500 mm, W = 2300 mm, H = 1780 mm) - Weight: 4000 kg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 5318, veleno skylė: 26 mm, veleno greitis (maks.): 4 750 aps./min, TECHNICAL DETAILS Max. round diameter: 26 mm Max. square dimensions: 18 mm Max. hexagon dimensions: 22 mm Spindle power: 2.2 kW Number of spindles: 4 Spindle bore: 26 mm Speeds: 1,180 - 4,750 rpm Tool holder: 6 slots MACHINE DETAILS Length (L – R): 1,800 mm Width (F – B): 1,000 mm Dodswtq Urepfx Af Hjku Height: 1,400 mm Weight: 800 kg Total power: 3.2 kW Operating voltage: 380 V 50 Hz

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2018, veikimo valandos: 40 365 h, Bendra informacija Mašinos svoris: 22000 kg Įpurškimo agregatas Varžto skersmuo: 100 mm Spaudimo agregatas Spaudimo jėga: 2500 kN Atverties eiga: 650 mm Maksimalus angos aukštis: 1500 mm Atstumas tarp kolonų: 630 x 630 mm Išstūmėjo eiga: 200 mm Išstūmėjo jėga (į priekį / atgal): 60 kN Papildoma įranga Įpurškimo agregatas: 13000 kg Spaudimo agregatas: 9000 kg Į komplektą įtrauktas tik karštakanalinis įrankis Ši Otto Systems eKW 250/5500 PET mašina pagaminta 2018 metais. Ji pasižymi 2500 kN spaudimo jėga, 100 mm varžto skersmeniu ir maksimaliu įpurškimo greičiu 250 mm/s. Sauso ciklo trukmė – tik 1,6 sek., o bendras svoris siekia 22000 kg. Jei ieškote aukštos kokybės liejimo įpurškimu galimybių, rekomenduojame rinktis Otto Systems eKW 250/5500 PET įpurškimo liejimo mašiną, kurią siūlome parduoti. Dėl išsamesnės informacijos kreipkitės į mus. Pritaikymo sritys Įpurškimo liejimas Dkedpfx Aswlwbvof Heu

Gamybos metai: 1984, Sąlyga: naudotas, Multiple spindle head, multi-spindle drilling head, drilling gearbox -Multi-spindle drilling head with: drive -Drive gear motor SEW Eurodrive type: RF40DT80K4B -Power: 0.55 kW -Speed: 165 rpm -Max. x: drill bit Dkodpfx Afodz A Tpe Hju -4x drills installed collet: mm -Drilling pattern can be customised -Dimensions: 1115/150/H300 mm -Weight: 55 kg

Sąlyga: naudotas, Gamybos metai: 2020, Overview This complete filling line was most recently used for bottling spirits and includes a rinser-filler combination with a T-cork capper, conveyor belts, carton erector, and carton sealer. The line achieves a maximum output of 2,000 bottles per hour, depending on bottle volume and product type. As production volumes have increased, the seller has acquired a new, higher-capacity system. To present it in good condition, the seller has set up the line in the warehouse. Technical details Capacity: 2,000 bottles/hour Various bottle shapes possible, as height and width are adjustable Bottle volumes from 0.5l to 3.0l possible Last used for: Spirits, but suitable for other liquids as well Scope of delivery Project AE PRORINS2000 Linear rinser with a speed of up to 2,000 bph (2020) Project AE PROFILL2000 Linear filler with 10 electronically controlled filling valves (2021) Borelli T-cork capper Conveyor belts Lantech C-300 carton erector (2021) Lantech CS-300 carton sealer (2021) Dkjdpfxswqpkao Af Heu

Sąlyga: naudotas, New: Yes Color: Silver Usable Material: Bitumen Unladen Weight: 9,500 kg Cargo Space Volume: 50,000 l BITUMEN TANK (50 TONS) • The tank capacity must be 50 tons. • The tanks must be manufactured in accordance with TSE and Highway Commission standards. • The tank must be equipped with a thermal oil heating system. • Seamless serpentine piping system for heating • The bitumen temperature must reach mixing temperature • The fuel tank must include a level and temperature indicator, suction nozzle, filling port and ventilation system, inspection hatch, and drain. • There must be support legs under the tank, and its surface must be insulated with 50 mm rock wool and covered with 0.80 mm galvanized sheet metal. 1. THERMAL OIL GENERATOR • The generator capacity must be 2,000,000 kcal/h. • The system must be designed for diesel fuel operation. Dkodew Hzkwepfx Af Hsu • The generator must include a 1,500 l supply tank. • The generator must be horizontal, have a seamless steel-drawn thermal oil line, be double-walled, and of circulating body type. • The generator body must be insulated with 100 mm rock wool and covered with aluminum sheeting. • The generator system must be manufactured according to production standards and must include an expansion tank, a degasser, oil filter, valves, and a fully automatic ignition-controlled burner, control panel, pump, and necessary safety equipment. • The serpentine coil must be made of at least 30 m² of seamless steel pipe. • The generator must be equipped with a coupled warning system to protect the entire system in case of hazardous situations due to high oil level or decreasing heat transfer oil level. • The burner system must be designed for automatic activation according to the operational temperature setting of the heat transfer oil. • The system must be manufactured as a complete package.

Sąlyga: naudotas, suitable for fruit juice; with and without pulp; cold filling, ultra-clean Dksdpfx Aswm R Raef Hou Capacity: 12,000 bottles/hour; Filling temperature: 2–5 °C; with 40-head rinser with 40-valve filler with electronic flow meter 8-head screw capper for 38 mm plastic caps Pitch: 113.1 mm; Diameter: 1,440 mm; Clockwise rotation; Installed power: 14 kW; Gas pressure: 8–12 bar; Air pressure: 6–8 bar; Water pressure: 3–4 bar; Electric connection: 380 V; 50 Hz; with control cabinet

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, The BTS-MF60HD special baler is ideal for compacting your challenging and tough materials such as cans, PET, metal buckets, and other tin containers; it also efficiently reduces plastics to a minimum. This special baler impresses with its easy operation and large feed opening. Finished bales can be conveniently removed using the automatic bale ejector. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and ensure the material is properly returned to the recycling loop. Pressing force: 13 tons Bale weight: 25 - 60 kg (depending on material) Bale size: 650 H (var.) x 600 W x 400 D mm Machine dimensions: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Filling opening: 600 W x 400 H mm Press cycle: 25 seconds Motor: 2.2 kW, 16 Amp Power supply: 230 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale ejector for convenient bale removal Material retainer to minimize material spring-back Cross strapping for secure bale stability Strap holder for strapping bands A quality product "Made in Europe" Suitable for compacting: PET bottles Cans and tin containers Canisters and plastic containers Cardboard and film Additional options: Annual maintenance with safety inspection (UVV) Machine colour available according to RAL chart Strapping bands Power supply 380 - 400 V (3-phase) Dsdevbq Rkopfx Af Heku PET press, PET baler, can press, can baler, special baler

Sąlyga: naudotas, pirmoji registracija: 01/1900,

Gamybos metai: 1984, Sąlyga: naudotas, Multi-spindle head, multi-spindle drilling head, drilling gearbox - Multi-spindle drilling head with drive - Drive: SEW Eurodrive geared motor, type: RF40DT80K4B Dedpfxsdz A Tre Af Hjku - Power: 0.55 kW - Speed: 165 rpm - Max. drill size (x): - 4x drills installed, collet: mm - Drilling pattern can be customized - Dimensions: 1115/150/H300 mm - Weight: 55 kg

Sąlyga: naudotas, Gamybos metai: 2002, Overview This PET bottling line was built between 2002 and 2013 by the German manufacturer Krones and is designed for the filling of still and sparkling water in PET bottles with Alaska neck finish. The line will remain in operation until September 2025 and can be inspected during ongoing production by prior appointment. Dksdpfx Afowqpgze Hsu Technical Details Capacity: 22,000 bph (the rated speed at 0.5 L is 25,000 bph) 60 rinsing nozzles 80 filling valves 15 capping heads Product: Water Container material: PET Neck finish: Alaska Label type: OPP Capper brand: Zalkin Years of manufacture: 2002, 2009, 2013 Scope of Supply Compressor: Atlas Copco ZD2300VSD (2009) Blow molder: Krones Contiform S14 (2009) Air conveyor: Eurosistemi (2002) Filler: Krones Volumetic, Variojet (2002) Labeler: Krones Contiroll (2013)

Sąlyga: naudotas, New: Yes Color: Silver Usable Material: Bitumen Unladen Weight: 9,500 kg Djdpew Hzfnefx Af Hoku Cargo Space Volume: 50,000 l BITUMEN TANK (50 TONS) • The tank capacity must be 50 tons. • The tanks must be manufactured in accordance with TSE and Highway Commission standards. • The tank must be equipped with a thermal oil heating system. • Seamless serpentine piping system for heating • The bitumen temperature must reach mixing temperature • The fuel tank must include a level and temperature indicator, suction nozzle, filling port and ventilation system, inspection hatch, and drain. • There must be support legs under the tank, and its surface must be insulated with 50 mm rock wool and covered with 0.80 mm galvanized sheet metal. 1. THERMAL OIL GENERATOR • The generator capacity must be 2,000,000 kcal/h. • The system must be designed for diesel fuel operation. • The generator must include a 1,500 l supply tank. • The generator must be horizontal, have a seamless steel-drawn thermal oil line, be double-walled, and of circulating body type. • The generator body must be insulated with 100 mm rock wool and covered with aluminum sheeting. • The generator system must be manufactured according to production standards and must include an expansion tank, a degasser, oil filter, valves, and a fully automatic ignition-controlled burner, control panel, pump, and necessary safety equipment. • The serpentine coil must be made of at least 30 m² of seamless steel pipe. • The generator must be equipped with a coupled warning system to protect the entire system in case of hazardous situations due to high oil level or decreasing heat transfer oil level. • The burner system must be designed for automatic activation according to the operational temperature setting of the heat transfer oil. • The system must be manufactured as a complete package.

Sąlyga: naudotas, Gamybos metai: 2001, PET bottling line by KHS Machine (add-ons): with de- and palletizing systems Output for 1 liter format: 24,000 bottles/hour Formats: 0.5 L and 1 L PET bottles Dkjdpfx Asvu Tufof Heu Features: depalletizer, air conveyor, rinser, filler incl. height inspection, mixer, packer, crate washer, palletizer

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, The BTS-MF60HD Special Baler is ideal for compacting your tough and hard materials such as cans, PET, metal buckets, and other steel containers, but it also reduces plastics to a minimum. This specialist baler stands out for its user-friendly operation and large filling capacity. Finished bales can be easily removed using the automatic bale ejector. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and properly return the material to the recycling loop. Pressing force: 13 tonnes Bale weight: 25 - 60 kg (depending on material) Bale size: 650 H (variable) x 600 W x 400 D mm Machine dimensions: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Filling opening: 600 W x 400 H mm Press cycle time: 25 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale ejector for easy removal Retainer to minimize material spring-back Cross-tying for secure bale stability Holder for 7 strapping tape rolls A quality product "Made in Europe" Suitable for compacting PET bottles Cans and steel containers Canisters and plastic containers Cardboard and film Additional options: Annual maintenance with UVV inspection Machine colour per RAL Strapping tapes Power supply 380 - 400 V (3 phase) Dkedpfxebhy Twe Af Hou PET baler, PET bottle baler, can baler, special baler, baler, paper baler, waste paper baler, cardboard baler, film baler, waste baler, recycling baler, compactor, commercial waste press, residual waste press.

Sąlyga: naudotas, rida: 1 km, pirmoji registracija: 06/1979, Gamybos metai: 1979, mašinos/transporto priemonės numeris: 011 / 11,

Sąlyga: naudotas, multi-spindle head, boring beam, multi-spindle drilling head, articulated multi-spindle head, line boring machine, dowel boring head, dowel boring machine, drill gearbox, drill head - Manufacturer: Grotefeld, multi-spindle head for up to 3 drills - Mount: M8 - Spindle drive: see technical drawing in photo for dimensions - Spindles: 2x right-hand / 1x left-hand rotation - Drill spacing: see photo Dodpfxehh Tk Eo Af Heku - Dimensions: 132/85/H82 mm - Weight: 3.1 kg

Sąlyga: naudotas, Gamybos metai: 1999, Overview This PET filler was manufactured by KRONES in Germany in 1999. It is designed for filling carbonated soft drinks into PET bottles and is equipped with a Pick & Place neck handling system. The machine is immediately available and can be inspected upon request. Technical Data - Capacity: 27,000 bph with 1.0L PET - 25,000 bph with 1.5L PET - 22,500 bph with 2.0L PET - Formats: 1.0L, 1.5L, 2.0L PET bottles - Closures: PCO 1881, plastic screw caps - Filling system: Isobaric - Number of filling valves: 126 - Capper: Screw Capper 720-18-126 (Alcoa) - Direction of operation: Right-to-left (counterclockwise) - Neck handling with Pick & Place system - Product: Carbonated soft drinks (8 g/l CO₂, 20°C) - Machine pitch: 144 Dsdpfjwiizpjx Af Hsku - Machine safety: Full guard – lifting version - Control system: Siemens S7 Scope of Delivery - Krones Sensometic VP-I-PET filler - Screw capper from Alcoa (720-18-126) - Krones Checkmat Pick & Place neck handling system - Integrated foam control system - Neumo shut-off valves

Sąlyga: naudotas, New: Yes Usable material: Bitumen Unladen weight: 16,000 kg Fully automatic bitumen emulsion system 1. COLLOID MILL (10 m³/hour) 1 pc 2. FOAM TANK (5 m³) 1 pc 3. BITUMEN FEED PUMP 1 pc 4. FOAM SOLUTION SYSTEM 1 pc 5. PIPEWORK AND EQUIPMENT 1 set 6. CONTROL PANEL 1 pc 7. CHASSIS 1 pc FOAM TANK (1 unit) Frame: - Box section - Capacity: 5 m³ - The tank body is manufactured from 3 mm stainless steel plate, AISI 304 - Welds are made using appropriate stainless steel TIG welding b) Heating - 2-inch stainless steel pipe - Oil inlet and outlet pipes are 1 inch, DN50, PN16, DIN 2633 - Leak test is performed at 6 bar pressure c) Mixing system - 3 kW, 60 rpm mixing motor - Drive is equipped with sprockets - Sealing is ensured at shaft bearings - Bearings are either SKF or FAG Dkedpow Hzfzjfx Af Hou - Fixed paddles are mounted on the side walls to enhance agitation and ensure a homogeneous structure d) Temperature indicators are both digital and analog, with two outputs provided - The capacity of the bitumen pump is max. 8 m³/h - Coupled to a 7.5 kW, 400 rpm gear motor - The bitumen meter is a system with a 10 m³/h capacity a) Pipes - Manufactured from steel pipes according to DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25) - The mill line consists of a 1.5-inch inner tube and a 2-inch outer jacket tube - Jacketed pipes are welded according to TSE standards - Bypass pipes are installed as 0.5-inch at appropriate points b) Compensators - DN 50, DN 80, PN 16, 200°C c) 3-way and 2-way valves with heating - Conforms to TSE standards - Designed for working conditions at high pressure (16 bar) and temperature (230°C) d) Hot oil valves - KLINGER or THERMO brand hot oil valve, heat-resistant - Comes in DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Features a 3 mm wire mesh internal container, easy and frequent cleaning - The panel is assembled to IC standard specification.

Sąlyga: geras (naudotas), Multi-spindle head, multi-spindle drilling head, drilling gearbox - Manufacturer: Perske, multi-spindle drilling head with drive - Drilling head: 18 spindles - Drill bit spacing: 32 mm - Stroke: 50 mm - Drive: DSB 1306/2 1.8 kW 2800 rpm - Collets: Ø10 mm - Quantity: 2x multi-spindle drilling head with drive available - Price: per unit - Overall dimensions: 800/200/H575 mm Dkjdpjvmw H Ajfx Af Hju - Weight: 67 kg/unit

Sąlyga: naudotas, Gamybos metai: 2000, Overview This complete PET bottling line was manufactured between 2000 and 2012 by a group of renowned European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for both still and carbonated soft drinks and comprises a stretch blow molding machine, filler, labeller, packaging machine, as well as various conveying and inspection systems. The system achieves an output of up to 36,000 bottles per hour at 1.5 L and is immediately available. All machines are well maintained, equipped with original components and corresponding peripheral devices. Technical Data Capacity: - 36,000 bph at 1.5 L water - 35,000 bph at 1.5 L sweetened soft drinks - 32,000 bph at 1.5 L light soft drinks Formats: 0.5 L and 1.5 L bottles Closure: PCO 28-1881 screw cap Filling products: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, cap feed via chute and tipper (Zalkin + NSM) Packaging: Shrink film: 3x2 bottles (double-lane) Pallet types: Euro pallet (1,200 x 800 mm), Düsseldorf pallet (600 x 800 mm) Electrical data: 400 V / 50 Hz Controls: ABB, Siemens Operating direction: Standard Scope of Delivery - Stretch blow molder: SIG Corpoplast Blomax 24, year 2008, 24 stations, oven with 20 boxes, ABB control, including preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK Dksdpfx Afswh U Avs Hou - Air conveyor: NTS Mistral, year 2000, pneumatically adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000, 176 electronic filling valves, valve manifold (APV), air conveyor, infeed screw, clamp star - Capper: Zalkin, 22 heads; cap feed (NSM); foam cleaning (ECOLAB, 2001); dosing units (2011) - Mixer/Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000, 65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012, 26 plates, hotmelt, wrap-around, roll-fed, parallel feed, safety lift model - Inspection & Coding: Fill level and closure control: KHS Innocheck CUB Vision Circle, year 2013; bottle laser coding: Videojet with enclosure; packaging inspection: KHS Innocheck CUB, year 2015 - Packaging machine: Kisters SP060V, year 2000, shrink packer 3x2 (double-lane), 60 cycles/min, manual lane width adjustment, film only - Conveyors & Pack Labelling: Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication; pack conveyor: Paxona + Schaefer, year 2009; pack labelling: Contact 100, self-adhesive label from roll

Sąlyga: naudotas, New: Yes Processable material: Bitumen Unladen weight: 18,000 kg Fully automatic polymer modification plant TECHNICAL SPECIFICATIONS Grinding and homogenizing of polymer (SBS, APP, KRATON, etc.) and bitumen. Feeding: Bitumen-polymer premix Flow rate: max. 15 t/h, density: 1.1 g/cm³ Viscosity: max. 20,000 mPa·s (cP) Temperature: 190°C Solid matter: Machine inlet: max. 3–6 mm, machine outlet: max. 0.2 mm MOTOR 130 kW Speed: 3000 rpm Voltage: 400 V, 50 Hz, 3 phase, starting mode Y / Δ 2. VERTICAL MIXING TANK Frame: - Manufactured as a vertical rectangular profile - Dimensions for a volume of 11 m³ - Tank body made from 5 mm St37 quality plate - Bitumen fill pipe: 3" DN80, PN16, DIN2633, 1 unit; outlet pipe: 3" DN150, PN16, DIN2633; and 3" DN80, PN16, DIN2633, 2 units - Maintenance cover dimensions: 500 x 500 mm b) Heating - External diathermic oil heating - Leak test performed at minimum 6 bar c) Insulation - 100 mm wire mesh rock wool complies with Turkish Standards Institute (TSE) - Outer surface made of stainless steel sheeting, manufactured according to tank dimensions d) Mixing system - 2 × 7.5 kW mixing motors with 60 rpm - Drive system with sprockets - Leak protection at shaft seals - Bearings from SKF or FAG - Fixed paddles mounted to the tank walls for increased dispersion and homogeneous mixing e) Temperature indicators are both digital and analog, with two outputs f) Integrated connection paddle, ladders, and platform included 3. BITUMEN PUMPS - 2 ½ XLA type with oil heating - Pumping capacity: 25 t/h - Coupled with 7.5 kW, 400 rpm geared motor 4. SBS FEED UNIT (POLYMER MODIFIED GRANULE) a) Feed hopper - Slot width: 500 x 500 mm - Made of 4 mm plate - Equipped with a granulate feed helix (30 m³/h capacity) - Frame tube wall thickness: 5 mm, tube diameter: 220 mm - Shaft seal leak protection - Bearings from SKF or FAG - 5.5 kW, 80 rpm geared drive with clutch 5. PIPE NETWORK AND EQUIPMENT a) Pipes Dkodjw Hza Sepfx Af Hju - Steel pipes according to DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25) - Mill line: 3" internal pipe, 4" external jacket pipe - Jacket pipes welded as per TSE standards - Bridge pipes at designated points, 1 inch b) Compensators - DN 50, DN 80, PN 16, 400°C c) 3-way and 2-way heated valves - Compliant with TSE standards - Pneumatic control - Operating under high pressure (16 bar) and temperature (230°C) d) Hot oil valves - KLINGER or THERMO brand piston hot oil valve - DN 25 PN16, DN65 PN16, DN50 PN16, ...