Kelių tiesimo mašina

Polygonmach Polymer Modificaiton Plant PMB

New: Yes
Processable material: Bitumen
Unladen weight: 18,000 kg

Fully automatic polymer modification plant
TECHNICAL SPECIFICATIONS
Grinding and homogenizing of polymer (SBS, APP, KRATON, etc.) and bitumen. Feeding: Bitumen-polymer premix
Flow rate: max. 15 t/h, density: 1.1 g/cm³
Viscosity: max. 20,000 mPa·s (cP) Temperature: 190°C
Solid matter:
Machine inlet: max. 3–6 mm, machine outlet: max. 0.2 mm

MOTOR
130 kW
Speed: 3000 rpm
Voltage: 400 V, 50 Hz, 3 phase, starting mode Y / Δ

2. VERTICAL MIXING TANK
Frame:
- Manufactured as a vertical rectangular profile
- Dimensions for a volume of 11 m³
- Tank body made from 5 mm St37 quality plate
- Bitumen fill pipe: 3" DN80, PN16, DIN2633, 1 unit; outlet pipe: 3" DN150, PN16, DIN2633; and 3" DN80, PN16, DIN2633, 2 units
- Maintenance cover dimensions: 500 x 500 mm
b) Heating
- External diathermic oil heating
- Leak test performed at minimum 6 bar
c) Insulation
- 100 mm wire mesh rock wool complies with Turkish Standards Institute (TSE)
- Outer surface made of stainless steel sheeting, manufactured according to tank dimensions
d) Mixing system
- 2 × 7.5 kW mixing motors with 60 rpm
- Drive system with sprockets
- Leak protection at shaft seals
- Bearings from SKF or FAG
- Fixed paddles mounted to the tank walls for increased dispersion and homogeneous mixing
e) Temperature indicators are both digital and analog, with two outputs
f) Integrated connection paddle, ladders, and platform included

3. BITUMEN PUMPS
- 2 ½ XLA type with oil heating
- Pumping capacity: 25 t/h
- Coupled with 7.5 kW, 400 rpm geared motor

4. SBS FEED UNIT (POLYMER MODIFIED GRANULE)
a) Feed hopper
- Slot width: 500 x 500 mm
- Made of 4 mm plate
- Equipped with a granulate feed helix (30 m³/h capacity)
- Frame tube wall thickness: 5 mm, tube diameter: 220 mm
- Shaft seal leak protection
- Bearings from SKF or FAG
- 5.5 kW, 80 rpm geared drive with clutch

5. PIPE NETWORK AND EQUIPMENT
a) Pipes
- Steel pipes according to DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25)
- Mill line: 3" internal pipe, 4" external jacket pipe
- Jacket pipes welded as per TSE standards
- Bridge pipes at designated points, 1 inch
b) Compensators
- DN 50, DN 80, PN 16, 400°C
c) 3-way and 2-way heated valves
- Compliant with TSE standards
- Pneumatic control
- Operating under high pressure (16 bar) and temperature (230°C)
Fsdpfx Asx D Df Nefqogg
d) Hot oil valves
- KLINGER or THERMO brand piston hot oil valve
- DN 25 PN16, DN65 PN16, DN50 PN16, ...

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.