GM Gera ARCADE GEL 6 RV1-VL 362/110-30 butelių plovimo mašina (2010)

GM Gera Flaschenreinigungsmaschine

Sąlyga: naudotas, Gamybos metai: 2007, Overview The bottle washing machine was previously used in a brewery in Germany. Due to regular and thorough maintenance, the machine is in excellent condition. All tanks and the machine body are made of stainless steel. The machine is still installed and in operation. To increase line speed, this machine is being replaced despite its very good condition. Technical Data: - Rated output: 13,000 bph (based on 1.0L mineral water bottles, format: 89 x 310 mm, weight: 600g) - Total number of bottle cells: 3,240 pcs - Cells per basket row: 18 pcs - Cell pitch: 110 mm - Chain pitch: 169 mm Treatment Times - Total treatment time: 14.95 min - Total immersion time: 7.56 min - Lye immersion time: 6.73 min - Lye filling time: 7.73 min - Lye contact time: 7.89 min - Total internal spraying time: 70 sec - Total external spraying time: 25 sec Dimensions - Housing (L x W x H): 8,530 x 2,300 x 2,990 mm - Overall dimensions (L x W x H): 8,880 x 4,200 x 3,330 mm - CE certified - Chemical dosing pumps included - Machine data sheet included - Rotary tube spraying - Single-end machine Gsdpfxexbr Sls Abmokf - Label ejection rear left - Label press included - Finger discharge + finger feeding - Bottle cells made of plastic - Full stainless steel machine body - Steam extraction

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Profile dimensions: max. 150 x 50 mm Tube diameter: 50 – 150 mm Wall thickness: 1.5 - 5.5 mm Reference material (tensile strength): 600 N/mm² Coil diameter: max. 2,100 mm Coil weight: max. 10 t Finished tube length: max. 9,000 mm Round tube diameter: as per list Profile tube dimensions: as per list Gkjdpfxsuc Sw Aj Abmjf Speed: 100 m/min Working direction: left → right Line composition: 1. Entry section: - Double payoff reel - Coil opener / Feeder / Straightening machine - Crop shear - Strip end welding unit - Strip guide - Strip twister / Feeder / Entry strip accumulator - Strip accumulator - Edge trimming - Exit twister 2. Forming section: - Number of horizontal stands: 4 - Number of vertical stands: 3 3. Welding 4. Sizing 5. Cut-off 6. Beveling 7. Blow-out 8. Bundling 9. Hydraulics 10. Electrical system

Sąlyga: naudotas, Gamybos metai: 1999, Overview The bottle washing machine was previously used in a brewery. Thanks to a complete overhaul in 2005 and regular maintenance, the machine is in very good condition. All tanks and the machine frame are made of stainless steel. The machine has already been dismantled and is stored dry, allowing for easy loading and transport. Technical Data: - Capacity: 6,700 bph - Cell pitch: 102 mm - Bottles per row: 10 Dimensions & Weights: - Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg - Ready-to-operate with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg - Year of manufacture: 1999 - Formats: 0.33 l, 0.5 l Machine Details / Features: - Heated by steam - Pre-cleaning and removal of residual liquids by pulsed rinse prior to washing - CE-certified - Chemical dosing pumps - Machine data sheet included - High-pressure pre-rinse - Rotating spray nozzles - One-end machine - Label discharge at rear right - Finger-type bottle infeed/outfeed - Bottle cells made of plastic - Concentration measurement - NaOH storage tank - Spindles in stainless steel Gkedpfx Abjwg E D Ijmef - 24V control voltage - Siemens S7 control system - Regularly serviced - Complete machine frame in stainless steel - Steam extraction - Machine dismantled, ready for shipping - Automated machine start (heating, etc.)

Sąlyga: naudotas, Gamybos metai: 2024, Overview The bottle cleaning machine was previously used in a brewery. Owing to its low operating hours, the machine is in excellent, as-new condition. It was replaced because the previous owner wanted to process bottle formats incompatible with this machine. All tanks and the machine body are made of stainless steel. The machine is already disassembled and stored dry, allowing for easy loading and transport. The machine comes with a 12-month warranty. Technical data: - Capacity: 9,500 bottles/h - Cell pitch: 95 mm - Bottles per row: 25 Gkedpfxsvrfivj Abmef Dimensions & weights: - Machine body: 7,162 x 2,740 x 2,500 mm / 18,806 kg - Ready-to-operate with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - Year of manufacture: 2024 - Formats: 0.25l, 0.33l, 0.5l, 0.75l Machine details / Features: - Heated by steam - Pre-rinsing and removal of residual liquid via pulsed rinsing before washing - CE-certified - Chemical dosing pumps - Machine data sheet included - Reinforced high-pressure pre-spraying - Rotating spray nozzles - Single-end machine (container infeed/discharge on the same side) - Plastic bottle cells - Concentration measurement - Liquid NaOH dosing - Stainless steel spindles - 24-volt control voltage - Siemens S7 control - Complete stainless steel machine body - Steam vent extraction - Machine dismantled, ready for shipment - Automated machine start-up (pre-heating, etc.)

Sąlyga: labai geros būklės (naudotas), ROLLER COATING MACHINE (REVERSE) Godpfxoidqwpe Abmekf Max. working width: 1300 mm Total machine length approx.: 1600 mm Integrated control cabinet with operator panel Driven conveyor carpet for workpiece feed (with servo controller, rated power 0.75 kW) Feed speed: 6 m/min to 24 m/min Total connected load approx.: 4.1 kW Equipped with 2 working units: * 1st unit (with 2 rollers): Dosing roller made of chrome steel, diameter 174 mm + application roller with rubber coating, diameter 248 mm, both with individual speed controllers (power 0.37 kW + 0.75 kW), including rubber-coated counter roller underneath * 2nd unit (with 2 rollers): Dosing roller made of chrome steel, diameter 174 mm + application roller with rubber coating, diameter 248 mm, both with individual speed controllers (power 0.37 kW + 0.75 kW), including rubber-coated counter roller underneath

Sąlyga: naudotas, Gamybos metai: 1993, Overview The bottle washing machine GM Gera NAGEMA Arcade DS was previously used in a brewery, where it operated in single-shift mode. As sales volumes have declined, the brewery's beer is now bottled at another location, freeing up this bottling line. Due to its low operating hours and regular maintenance, the machine is in very good condition. All tanks and the machine frame are made of stainless steel. Spare parts, such as bottle pockets, are also still available. Furthermore, in 2018, the main drive shaft as well as the SEW motor and gearbox were overhauled, and the carrier chain was replaced in 2015. The machine is still installed and can be demonstrated in operation. Technical data: Capacity: 23,000 bottles/hour Cell pitch: 85 mm Bottles per row: 16 Dimensions incl. attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: - Standard drives - Steam heating - Operator side left - CE certified - Chemical dosing pumps - Machine data sheet available - Fixed-pipe nozzles, cycle-controlled - Single-ended machine - Label discharge rear right - Finger discharge and feed - Bottle discharge left - Bottle pockets made of plastic - Lauer HMI - Caustic concentration measurement - 24 V control voltage - S5 control system (conversion to S7 available upon request) - Regularly maintained - Water component in stainless steel - Steam extraction - Sampling valves - KSB pumps in stainless steel - Insert strainers for baths - Water meter - Endress conductivity measurement Additional equipment: Gksdjl Hx Adspfx Abmjf Spare parts included

Sąlyga: paruoštas naudoti (naudotas), Gebruikte blikproductielijn voor de vervaardiging van blikken met een diameter van 73 mm of 99 mm. Er zijn diverse samenstellingen van machines beschikbaar. Bestaande uit: Gkodevy Tyxopfx Abmef - Krupp Sdvt duplex snijmachine - Soudronic FBB400 lasmachine - Soudronic intern poedercoatingsysteem - Extern lakkeringssysteem - Frei uithardingsoven - Metalbox 65d spinflansapparaat - FMI A304 profileringseenheid - FMC 652 sluitsysteem

Sąlyga: naudotas, Gamybos metai: 2018, Speed: 5,300 bph – 500 ml PET Kosme Preform Unscrambler – year 2018 Gkodpfxov Sb N Es Abmjf Kosme Preform Elevator – year 2018 Kosme Preform Orientator – year 2018 Kosme Blow Moulder – year 2018 ATS Chiller Air conveyors Mixer – year 2016 Kosme Filler – year 2017 AVE Capper – year 1999 Kosme Labeller – year 2018 Conveyors SMI Shrink Wrapper – year 2001 SMI Tunnel Suitable for 6 / 12 / 24 packs Videojet Date Coder Logopak Carton Labeller – year 2012 Code: NP 668

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, For sale: ERLENBACH ESA 5 cutting line with VIRO packer, model PPZA-1300/6 - Year of manufacture: - Erlenbach ESA 5 - 2013 - VIRO model PPZA-1300/6 - 2011 - Used for less than a month - Maximum block dimensions (L x W x H): 5100 x 1260 x 1260 mm Gkodpfov Hm A Tox Abmef - Horizontal cutting: up to 61 oscillating wires - Vertical cutting: up to 11 wires - Cutting speed: 1.5 m/min - Automatic wire positioning - Scrap grinding system (top, bottom, sides)

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, slėgis: 6 juosta, garantijos trukmė: 60 mėnesiai, vidinis plotis: 5 000 mm, vidinis ilgis: 10 000 mm, vidinis aukštis: 5 000 mm, filtravimo plotas: 250 m², tūrio srautas: 16 m³/val, Įranga: apšvietimas, dokumentacija / vadovas, Blast room *up to 5 years warranty* for all abrasives, constructed from steel frame/isopanels with filtration system, recirculation system, abrasive preparation, 200l pressure blasting pot with automatic refilling, blast hose with dead man control, breathing air system, LED lighting, wall lining made of 70shore 4mm fabric-reinforced rubber, sweep pit with bucket elevator. Abrasive return via sweep pit with bucket elevator, upgradeable to crosswise screw conveyor with dosing hood across full width as sweep pit or complete flat belt floor. Workpiece transport can be retrofitted: blast trolley with track bed, crane system, crane roof opening, etc. For glass bead blasting of stainless steel, upgradeable with proper magnetic drawer or electrically driven magnetic drum separator. For blasting with two different abrasives (ferritic and mineral), upgradeable with magnetic drum separator, final demagnetizing stage and a second air separator for abrasive separation and cleaning. Safety features: battery emergency lighting, emergency stop buttons inside and outside the cabin, viewing window to the blast chamber, door/gate limit switches, dead man control, rapid vent pressure vessel. Up to 5 years warranty on various components. Gjdpfou Ey Dlox Abmekf 50 years of experience and more than 3,000 systems in blast equipment engineering.