NAGEMA Arcade DS 03/85/24 butelių plovykla

GM Gera Flaschenreinigungsmaschine

Būklė: naudotas, Gamybos metai: 2024, Overview The bottle cleaning machine was previously used in a brewery. Owing to its low operating hours, the machine is in excellent, as-new condition. It was replaced because the previous owner wanted to process bottle formats incompatible with this machine. All tanks and the machine body are made of stainless steel. The machine is already disassembled and stored dry, allowing for easy loading and transport. The machine comes with a 12-month warranty. Technical data: - Capacity: 9,500 bottles/h - Cell pitch: 95 mm - Bottles per row: 25 Dimensions & weights: - Machine body: 7,162 x 2,740 x 2,500 mm / 18,806 kg - Ready-to-operate with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - Year of manufacture: 2024 - Formats: 0.25l, 0.33l, 0.5l, 0.75l Pedpfevrfivox Adzjpt Machine details / Features: - Heated by steam - Pre-rinsing and removal of residual liquid via pulsed rinsing before washing - CE-certified - Chemical dosing pumps - Machine data sheet included - Reinforced high-pressure pre-spraying - Rotating spray nozzles - Single-end machine (container infeed/discharge on the same side) - Plastic bottle cells - Concentration measurement - Liquid NaOH dosing - Stainless steel spindles - 24-volt control voltage - Siemens S7 control - Complete stainless steel machine body - Steam vent extraction - Machine dismantled, ready for shipment - Automated machine start-up (pre-heating, etc.)

Būklė: geras (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, Equipment: 1 pincers feed (right) 1 two-point eccentric press 90 kN 3 standard slide units 1 narrow slide unit Podpfx Adsn E N Ndjzspt 1 control shaft Working range: Wire diameter: 0.5 - 4.0 mm Strip width: up to 60 mm Feed length: up to 270 mm Capacity: up to 350 cycles/min

Būklė: naudotas, Gamybos metai: 1999, Overview The bottle washing machine was previously used in a brewery. Thanks to a complete overhaul in 2005 and regular maintenance, the machine is in very good condition. All tanks and the machine frame are made of stainless steel. The machine has already been dismantled and is stored dry, allowing for easy loading and transport. Technical Data: - Capacity: 6,700 bph - Cell pitch: 102 mm - Bottles per row: 10 Dimensions & Weights: - Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg - Ready-to-operate with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg - Year of manufacture: 1999 Ppedpfx Adowg E D Iszjt - Formats: 0.33 l, 0.5 l Machine Details / Features: - Heated by steam - Pre-cleaning and removal of residual liquids by pulsed rinse prior to washing - CE-certified - Chemical dosing pumps - Machine data sheet included - High-pressure pre-rinse - Rotating spray nozzles - One-end machine - Label discharge at rear right - Finger-type bottle infeed/outfeed - Bottle cells made of plastic - Concentration measurement - NaOH storage tank - Spindles in stainless steel - 24V control voltage - Siemens S7 control system - Regularly serviced - Complete machine frame in stainless steel - Steam extraction - Machine dismantled, ready for shipping - Automated machine start (heating, etc.)

Būklė: naudotas, Gamybos metai: 2010, Overview This bottle washing machine ARCADE GEL 6 was manufactured in 2010 by the German company GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and is being replaced due to an increase in required throughput. Ppodpfx Aot Ul Exedzot Technical Details • Rated output: 33,000 bottles/hour • Adjustable range: 13,200 – 36,300 bottles/hour • Chain pitch: 169 mm • Cell pitch: 110 mm • Bottle cells per row: 30 units • Total bottle cells: 7,860 units • Bottle cells loaded: 7,680 units Consumptions • Compressed air: 1 m³ • Steam (operation): 489 kg/hour • Steam (heating up): 4,430 kg/hour • Electrical power: 48.4 kW • Water: 7.35 m³/hour Bath Volumes • Pre-soaking: 2,263 l • Pre-lye: 7,240 l • Lye 1: 31,755 l • Lye 2: 350 l • Hot water 1: 350 l • Hot water 2: 350 l • Cold water: 350 l

Būklė: paruoštas naudoti (naudotas), The crown caps are fed manually into the drop chute; the machine places the crown cap onto the bottle and presses it on. Ppsdpfx Adefh Dlrozot

Būklė: naudotas, Gamybos metai: 2018, Overview  The Gruber AFD6 is a filling machine for bottles and party kegs, manufactured by the German company Gruber in 2018, with a total operating time of 725 hours. The machine is available immediately. Technical Details Capacity: - 800 bottles/hour (0.33 l) - 750 bottles/hour (0.5 l) - 600 bottles/hour (1.0 l) - 400 bottles/hour (2.0 l) - 240 units/hour (5.0 l Party KEG) Podpfx Adsu I Hr Uszopt Output may vary depending on CO2 content and beer temperature (in practical operation, up to 1,000 bottles/hour with 0.33 l bottles have been achieved). - Long-tube filler with 6 filling heads - Fully automated filling process - Single or double CO2 flushing - Siemens S7 control system with touch panel - Operating hours: 725

Būklė: naudotas, Gamybos metai: 1995, Overview The "Sirio 7" bottle washing machine from German manufacturer MAG was built in 1995. Maintenance has been carried out regularly by MAG. The machine can be inspected and tested in person. Technical Details - Capacity: up to 7,000 bottles/hour Pedpfxotrbrqe Adzjpt - Bottle carrier cells for 1.0 litre bottles (smaller bottles can be processed with additional guide plates) - Bottle diameter: 78 – 90 mm - Bottle height: 288 – 310 mm - Bottle cells per row: 10 - Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm - Empty weight: 14,300 kg - Full load weight: 25,600 kg - Installed power: 20.85 kW - Heating system: Steam, 3 bar

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Kompletná lakovacia linka na parkety Výrobca - SORBINI/ VIET Rok výroby - 2001 Psdpordgrvofx Adzept Kapacita - 800 m²/smena Doba jedného cyklu - 8 minút Dĺžka linky - 42 m

Būklė: naudotas, Gamybos metai: 2016, Overview The filling line for glass bottles (single-use and returnable) was in operation until recently at a small brewery in Germany. The system is designed for 0.33l longneck bottles and can fill up to 2,500 bottles per hour. The machine is still in operation and can be inspected by appointment at any time. The bottle washer and depacker can also be purchased separately. Technical Details Capacity: 2,500 bph Formats: Set up for 0.33l longneck Filling temperature: 6°C Ppodjl Hx Rpspfx Adzjt Packaging: - 0.33l longneck in 24-unit folding cartons - 0.33l longneck in 24-unit modular crates Individual Machines / System Components - New glass depalletizer | Füllmeister | - | 2016 - Filler + Capper | H&K | VVF 14/3 | 1966 2016 major overhaul: with pre-evacuation, new rotary joint, new stainless steel table, new electrical system, new stainless steel control cabinet for the valves, 0.33 liter bottle guide set, Sihi vacuum pump, seals for lift cylinders and filling valves replaced in 2023, vacuum and overpressure valves fitted with new seals and springs in 2023 - Bottle Depacker | Joha | - | 1982 Pack head for 24 bottles in modular crate - Bottle Washer | Silmo | Praktika | 1983 Bottles per row: 12 - Labelling unit | Krones | Vinetta | 1999 Type 480-6-3-180 Labelling stations for back labels, front and neck ribbons, each with three glue pallets and gripper sponges, glue pallets, gripper sponges, and sponge roller at the bottle outfeed replaced new in 2023, glue pump Krones Unipump-H with glue heater - Packer | Pexco | - | - 1 head for 24 bottles in modular crates; new electrical system installed and machine overhauled in 2016 - Residual liquid and mouth control | Miho | LC2000 | Residual caustic detection from bottle washer, control of bottle mouth for crown caps/metal, incl. Silmo inspection screen for visual inspection of cleaned bottles - Crate Washer | Fleischer | - | - For cleaning empty plastic crates via in-line process, module size: 300x400mm, overhauled in 2016 - Compressor | Alup | Allegro 19-10 | 2016 Oil-free, 4,897 operating hours Transport - Bottle transport: various conveyor belts + 90° bends - Crate transport / roller conveyor: overhauled in 2016 with stainless steel side rails and legs

Būklė: dilaminuotas dirbtuvėje (naudotas), įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis,