Laisvi butelių konvejeriai

Krones

Būklė: naudotas, Gamybos metai: 1996, Overview This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has a capacity of 29,000 bottles per hour. The machine has undergone several upgrades, including an S7 control system, alkali filtration with a drum screen, and pH value measurement for hot water circuit 1. The machine will be in operation until the end of January 2026 and can be inspected on site at any time until then. Technical Details Capacity: 29,000 bottles/hour Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Equipment & Upgrades - Plastic cell with 110 mm pitch - Suitable for swing-top bottles - Bottle diameter: 54 - 90 mm - Bottle height: 180 - 340 mm Upgrades: - Retrofitted S7 control system - Drum screen for alkali filtration - Guardrails on the machine - Swing-top specific alkali spraying system in the return section Cleaning & Heating System: - Motorized spray systems - Heating via shell-and-tube heat exchanger and hot water - Lye concentration measurement and dosing control, also for post-laundering - pH value measurement for hot water circuit 1 Soaking & Rinsing System: - Double pre-soak with filter belt - Lye volume: 30 m³ - Post-soak, hot water 1, hot water 2, cold water, and fresh water - Head section can be steamed and disinfected - H₂ extraction Hsdovxtavjpfx Abvefg

Būklė: naudotas, Gamybos metai: 2019, Overview The fill level control unit was manufactured in 2019 by the German company Krones. The machine is currently not installed. Technical details: Capacity: 50,000 bph Inspection via gamma ray technology Krones Checkmat with discharge table and pusher Hedel Hxniopfx Abvjfg

Būklė: naudotas, Gamybos metai: 1999, Overview This PET filler was manufactured by KRONES in Germany in 1999. It is designed for filling carbonated soft drinks into PET bottles and is equipped with a Pick & Place neck handling system. The machine is immediately available and can be inspected upon request. Technical Data - Capacity: 27,000 bph with 1.0L PET - 25,000 bph with 1.5L PET - 22,500 bph with 2.0L PET - Formats: 1.0L, 1.5L, 2.0L PET bottles - Closures: PCO 1881, plastic screw caps - Filling system: Isobaric - Number of filling valves: 126 - Capper: Screw Capper 720-18-126 (Alcoa) - Direction of operation: Right-to-left (counterclockwise) - Neck handling with Pick & Place system - Product: Carbonated soft drinks (8 g/l CO₂, 20°C) - Machine pitch: 144 - Machine safety: Full guard – lifting version - Control system: Siemens S7 Hfjdjwiizpopfx Abvjg Scope of Delivery - Krones Sensometic VP-I-PET filler - Screw capper from Alcoa (720-18-126) - Krones Checkmat Pick & Place neck handling system - Integrated foam control system - Neumo shut-off valves

Būklė: naudotas, Gamybos metai: 2015, Overview The Kosme / Krones Barifill is an isobaric filler, currently in operation at a German brewery, where it can be seen running. The machine was manufactured by Kosme in 2015 and installed in 2016. It has a maximum output of 8,000 bottles per hour, with the manufacturer-rated nominal speed at 7,000 bottles/hour. The system is designed for 26-mm crown caps and features 30 filling stations. Technical Data - Output: 8,000 bottles/hour (for 0.33-liter bottles) - Closure type: 26-mm crown caps - Formats: - 0.5 NRW - 0.5 Longneck - 0.5 Lochmund - 0.33 ALE - 0.33 SUD - 0.33 Steinie clamp - Number of filling heads: 30 - Electrical specifications: - Max. voltage: 3x400 V + N + GND 50 Hz - Power consumption: 13.00 kW - Operating hours: 18,393 (as of March 2025) Hedpfxsv Ic Uzj Abvjfg Included spare parts: - Drives - Gearboxes - Cardan shaft - Other parts Annually serviced by Kosme/Krones - Lifting cylinders replaced in 2024 - Valves and cappers serviced in 2025 Features: - Bottle shower - High-pressure injection for foaming - Bottle stopper - Table rinser - Crown cap hopper

Būklė: naudotas, Gamybos metai: 2010, Overview This bottle washing machine ARCADE GEL 6 was manufactured in 2010 by the German company GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and is being replaced due to an increase in required throughput. Technical Details • Rated output: 33,000 bottles/hour • Adjustable range: 13,200 – 36,300 bottles/hour • Chain pitch: 169 mm • Cell pitch: 110 mm • Bottle cells per row: 30 units • Total bottle cells: 7,860 units Hfsdjt Ul Exopfx Abvsg • Bottle cells loaded: 7,680 units Consumptions • Compressed air: 1 m³ • Steam (operation): 489 kg/hour • Steam (heating up): 4,430 kg/hour • Electrical power: 48.4 kW • Water: 7.35 m³/hour Bath Volumes • Pre-soaking: 2,263 l • Pre-lye: 7,240 l • Lye 1: 31,755 l • Lye 2: 350 l • Hot water 1: 350 l • Hot water 2: 350 l • Cold water: 350 l

Būklė: naudotas, Gamybos metai: 2015, Overview The labelling machine was manufactured in 2015 by the German company Krones. It is still operational and is currently located at a German mineral water company. The previous owner has invested in a new machine, which is why this unit is now for sale. The machine is equipped with gripper feeds, enabling the processing of multiple formats and ensuring minimal changeover times. Additionally, it features automatic label magazines to further reduce downtime. Technical Data Capacity: up to 50,000 bph Design type: Rotary Working direction: counterclockwise (r-l) Modular machine Hjdpev I Tnxsfx Abvofg Conveyor height: 1150 mm Label type: cold glue Label positions: front/neck foil, body, back, seal Bottle formats: - 0.25l Vichy bottle - 0.5l GDB - 0.7l GDB - 0.75l gastronomy bottle Number of labelling stations: 3 Pitch circle diameter: 1800 mm Number of bottle plates: 45 Plate pitch diameter: 125.6 mm Bottle plate orientation via Danfoss servo drives Detection of damaged or fallen bottles at infeed Infeed stopper starwheel Glue rollers made of steel Prepared for bottle alignment using camera inspection Hotmelt unit for seal label by Robatech Hotmelt nozzle mounted at the labelling station Siemens S7 Technical documentation available Scope of Delivery - Date coder - Glue pumps Unipump H (with heating control)

Būklė: naudotas, Gamybos metai: 2004, mašinos/transporto priemonės numeris: M323, Used KRONES Contiform S8 + Mecafill Triblock Combi Technical Specifications & Performance Data This rotary blow-fill-cap monoblock is designed for premium PET bottle handling and beverage production. Manufactured by Krones, it integrates a Contiform S8 stretch blow molding module with a Mecafill filling block and a Krones capping unit, offering efficient performance for still and sparkling water. Developed for industrial packaging environments and suitable for integration into a used filling line or as a standalone second-hand system, it combines precision, reliability, and a compact footprint. Manufacturer: Krones Model Configuration: Contiform S8 + Mecafill (integrated tri-block) Year of Manufacture: 2004 Maximum Speed: up to 12,800 bottles per hour Bottle Material: PET Current Bottle Formats: Compatible with 0.5 L, 1.0 L, 1.5 L Max. Bottle Height: 350 mm Rotation Working Direction: Clockwise Neck Type: Alaska Hedpfxsyz R H Do Abvofg Quick Change Molding Tools (Blow Molds): 8 cavities Grippers (in/out): 8 Mandrels: 220 Blow Air Pressure: 40 bar Electrical Supply: 400 V, 3Ph, 50 Hz Control Systems: Siemens PLC with Krones HMI Advanced Automation & Control Systems The monoblock features an integrated automation suite that streamlines operations and reduces changeover times. The Siemens PLC platform coordinates the stretch blow molding, filling, and capping sections, while the Krones HMI provides intuitive process visualization, recipe selection for multiple bottle formats, and operator diagnostics. The rotary motion ensures smooth container transfer between stations, minimizing wear and misalignment. Electronic setpoints for speed and temperature profiles enhance consistency across shifts and batches. Safety interlocks and protected access points support reliable operation in beverage production. Integrated Line & Plant Connectivity Designed for seamless integration, this monoblock can operate in-line with preform handling, downstream conveyors, labelling systems, inspection stations, and secondary packaging machines. It fits modern beverage plants and industrial packaging layouts, supporting flexible format changes between 0.5 L, 1.0 L, and 1.5 L PET bottles. Its integrated design reduces footprint and transfer points compared to separate machines, boosting efficiency both in new installations and when upgrading an existing filling line. Machine Condition & Maintenance History The machine is refurbished and guaranteed; it is operational with matching spare parts available. It is delivered in flawless working condition, tested and ready for immediate use. A 6-month warranty underlines its reliability and provides added security for buyers of used machinery. Operational Performance & Versatility

Būklė: naudotas, Bottle filling line with a capacity of 30,000 bottles per hour. Compatible bottle types: 0.33l Vichy, 0.33l Euro, 0.35l Frucade, and 0.5l NRW single-use and returnable bottles. The line comprises the following machines/components: - Depalletizing and palletizing unit Manufacturer: Radenska & Steinle - Unpacker Manufacturer: SZA Federspiel - New glass depalletizer Manufacturer: Steinle Fördertechnik - Decorker Manufacturer: Rink - Bottle washer Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones Hjdpfx Abevu Tt Iovsfg - Beer pre-warmer Manufacturer: Fischer - Bottle filler Manufacturer: Krones - Crown cork feed bunker with magnetic conveyor Manufacturer: Gassner - Bottle fill level inspection system Manufacturer: Metec - Labeller Manufacturer: Krones/Renner - Label inspection system Manufacturer: Miho - Packer Manufacturer: SZA Federspiel - Full crate inspection system Manufacturer: Metec - Bottle carrier erector Additional Information: Line includes depalletizer and palletizer; years of construction: 1993 - 2009. Equipment: depalletizer and palletizer unit; unpacker; new glass depalletizer; decorker; bottle washer; crate washer; bottle inspector; beer pre-warmer; bottle filler; crown cork supply; fill level inspection; labeller; label inspection; packer; full crate inspection; bottle carrier erector.

Būklė: naudotas, Gamybos metai: 2018, Overview This can filling line comprises equipment from Krones, KHS, Ferrum, Kisters, Hein, Strema, and additional system components. The line is designed for beverage production in cans with a nominal capacity of approximately 60,000 cans per hour. The main filling and seaming section features a KHS Innofill EMD 108S can filler and a Ferrum F812 can seamer. The system also includes modern inspection and handling equipment, such as a 2023 Krones Checkmat, several Krones machines from 2018, and a Strema A5000BII from [year to be completed]. The line covers the core processes from can handling and filling to seaming, inspection, pasteurizing, packaging, and conveying. Several machines have been modernized or upgraded over time, so this line combines proven core filling technology with newer inspection, packaging, and auxiliary equipment. Technical Specifications: Performance: approx. 60,000 cans per hour Container types: standard cans, 500ml & 330ml Condition: used line, very good condition, well-maintained Application: beer, carbonated soft drinks Scope of Delivery Can depalletizer | Krones | Pressant | automatic can depalletizing system | 2018 Empty can inspection | Krones | Cantronic 709 | 2018 Can rinser | Hein | Can rinsing system | 1978 Can filling machine | KHS | Innofill EMD 108S | can filler for beer and carbonated soft drinks | 1997 Can seamer | Ferrum | F812 | can seaming machine | 1997 Lid feeding system | CSW | lid feeding system for can seamer | [year tbd] Fill level inspection | Krones | Checkmat 731 | 2023 Tunnel pasteurizer | KHS | Innopas | tunnel pasteurizer system | 2001 Can dryer | Gesete | BasicLine | 2018 Fill level inspection | Krones | Checkmat 707 | fill level inspection system | 2018 Tray and shrink film packer | Kisters+ZEVA | 197/60+ST/II-600V; completely overhauled in 2015 | 1992 Grouping station | Krones | Robobox T-GS | product grouping station before palletizing | 2018 Palletizer | Krones | Modulpal | automatic palletizer | 2018 Pallet stretch wrapper | Strema | A5000BII | 2021 Pallet labeling machine | Logopak | 850 P3 T02 P06 | 2022 Pallet conveyors | Krones | pallet transport system | 2018 Tray conveyors | Krones | tray conveyor belts | 2018 Can conveyors | Krones | can conveyor system | 2002 Additional Information The tray and shrink film packer was originally manufactured in 1992 and fully overhauled in 2015. The line combines proven core filling technology with multiple newer Krones handling and inspection components. Hsdpfjy Rxtqex Abvofg Offered as a used system in as-is condition, without warranty.

Būklė: naudotas, Gamybos metai: 2016, Inspekcinis įrenginys tuščių stiklinių butelių patikrai prieš jų užpildymą. Tikrinama butelio dugnas, sienelė ir kaklelis. Taip pat identifikuojami buteliai su šarmų likučiais po butelių plovimo. Prieš pagrindinę inspekciją sumontuotas papildomas tikrinimo modulis, kuris iš anksto pašalina svetimus ir pažeistus butelius. Tikrinimo kriterijai fiksuojami kameromis bei aukšto dažnio (HF) ir infraraudonųjų (IR) technologijomis. Įrenginys (papildomai): tuščių butelių tikrinimas Hjdpfxey Nnbbj Abvsfg Pildymo linijos našumas: 12 000 butelių/val. Srovė: 6 A Įtampa: 400 / 230 V Dažnis: 50 Hz Darbo kryptis: iš kairės į dešinę Valdymas / kontrolė: Simatic S7 Padėtis: dangtis ant kojų Pagrindinė konstrukcija: tiesiaeigis Įranga: valdymo ir vizualizacijos skydelis, dangtis su apsauginėmis durimis, butelių pašalinimo sistema

Būklė: naudotas, Gamybos metai: 2017, Overview This complete beverage can filling line was manufactured in 2017 by the German producer KHS. The line is designed for beverage production with a capacity of up to 40,000 cans per hour and is in good condition. Technical Data Capacity: 40,000 bottles/hour Product type: carbonated soft drinks and beer Bottle formats: 500ml 211/202 Hfedpfxeyb R Srj Abvog Closure formats: 211/202 Packaging formats: tray with film Application: KEG + beer Condition: good technical condition, dismantled Scope of Supply Can depalletizer | LINKER | DPG-500 | 2012 Can inspection | TransTech | Hysek CanCheck | 2012 Can conveyor | LINKER / KHS | Conveyor RC | 2012 Rinser | LINKER / KHS | Triplex Rinser TR | 2012 Short-time heater | KHS | Innopro 140/14/85 | 2012 Filler | KHS | Innofill Can DVD | 2017 Seamer | Ferrum | F08 | 2012 Lid feeder | NSM | Lidserver A30 | 2017 Conveyor | KHS | Innoline BTR | 2012 Fill level inspection | KHS | Innocheck CUB | 2012 Blow-off station | Europool | - Packaging machine | KHS Kisters | SP0502 | 2012 Pack conveyor | KHS | Innoline GTR | 2012 Handle applicator | KHS | CSM 050-2 | 2012 Packaging machine | KHS | Innopack 035 B2 + FS A-L | 2012 / 2017 Palletizer | KHS | Innopal PBL1N1 | 2012 Stretch wrapper | SIAT | MFP | 2017 Pallet conveyor | KHS | Innoline PTR

Būklė: naudotas, Gamybos metai: 2005, 6-head packer for 0.5 l and 0.33 l glass bottles: Krones Linapac II E35 LT1G Bottle receptacle: 6 x 20 or 6 x 24 bottles Machine (additional information): Packing machine for bottle crates Power: 24.5 kW Air consumption: 0.0002 m³/bottle Voltage: 230/400 V Frequency: 50 Hz Length: 6,160 mm Width: 4,120 mm Height: 5,033 mm Formats: 0.5 l glass bottle (D = 68.5 mm, H = 270 mm; ale / longneck), 0.33 l glass bottle (D = 61 mm, H = 238 mm; ale / longneck) Pack patterns: 6 x 20 horizontal, 6 x 24 horizontal, 20-bottle plastic crate (400 x 300 x 300 mm), 24-bottle plastic crate (400 x 300 x 270 mm) Running direction: right -> left Operation / control: PLC, operating cabinet with touch panel Hedpoxbqldjfx Abvofg Position: free-standing Base construction: square tube frame on ball feet Fitted with: 1 base machine (lifting unit, horizontal linear unit, gripper head carrier, motion axes), 2 gripper head assemblies (frame with 6 ring gripper heads, each with 20 (or 24) ring grippers, extraction device, manual change device, insertion frame, vibrator set, completeness control flap unit, clamping bars for guide plate adjustment), shelf magazine (magazine locations with drive for automatic storage), container conveyor, pack conveyor, safety devices, electrical and pneumatic equipment Peripheral equipment: buffer tables for empty and full crates Weight: 2,500 kg

Būklė: naudotas, Gamybos metai: 1991, Machine (additional feature): Cold glue labelling Rated filler capacity: 50,000 bottles/hour Formats: Neck / chest / body / back labels Direction of operation: left to right Operation / control: Siemens S5 Equipment: 2 cold glue stations Hfjdovcqwtspfx Abveg

Būklė: naudotas, Gamybos metai: 2007, Overview The pallet wrapper was built in 2007 by the Italian manufacturer Robopac. The machine was used in a water and CSD (carbonated soft drinks) production plant, where it was part of a PET filling line with a capacity of 27,000 bottles per hour. The pallet wrapper was professionally dismantled and requires technical maintenance. Technical Data Performance: approx. 60 pallets with 23 wraps Operating hours: 45,363 Pallet cover function + top press unit Scope of delivery Pallet wrapper Belts, rollers Sensors on conveyor belts (infeed, outfeed, diagonal) Spare parts (new and used) Documentation Hedpfjrwr T Nex Abvefg

Būklė: naudotas, Gamybos metai: 2000, Tuščių butelių inspektorius Gamintojas: Krones Modelis: Linatronic 712-M1; Pagaminimo metai: 2000 Mašina (papildoma): Tuščių butelių tikrinimo mašina Našumas: 32 000 vnt./val. Ilgis: 4 200 mm Plotis: 1 100 mm Hfedpfxjw Taypo Abvog Aukštis: 2 900 mm Formatai: 0,5L NRW, 0,33L Vichy, 0,33L Euro, 0,35L limonadas Važiavimo kryptis: dešinė -> kairė Valdymas / kontrolė: Simatic S7-300 Padėtis: laisvai pastatoma Pagrindinė konstrukcija: kvadratinio vamzdžio rėmas ant kupolinių kojų Komplektacija: pagrindinė mašina, atpažinimo ir inspektavimo sistemos, atmetimo sistemos, aprūpinimas / mašinos apsauga, pavaros, transporteris