"Atlas Copco Crepelle" aukšto slėgio kompresorius

Atlas Copco D44

Būklė: naudotas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: PNG2 4302HEX - 2200399999, vėsinimo galia: 491 kW (667,57 AG), įvesties srovės tipas: trifazis, aušinimo tipas: vanduo, bendras svoris: 4 974 kg, aplinkos temperatūra (maks.): 46 °C, aplinkos temperatūra (min.): −20 °C, įėjimo įtampa: 400 V, slėgis: 3 juosta, temperatūra: 7 °C, tūrio srautas: 84 m³/val, siurblio slėgis: 1,8 juosta, bendras plotis: 2 191 mm, bendras ilgis: 4 449 mm, bendras aukštis: 2 536 mm, garantijos trukmė: 3 mėnesiai, įėjimo dažnis: 50 Hz, Įranga: Tipinė plokštelė prieinama, Process Air-Cooled Chiller / Chilled Water Unit, Type: Phönix PNG2 4302 HEX (R513A) Manufacturer: MTA S.p.A. The Phönix PNG2 4302 HEX are compact air-cooled chillers suitable for outdoor installation. Equipment features: - Shell-and-tube evaporator Ljdpowzay Tefx Am Hehf - Electronic expansion valves - Shut-off valves for compressors - Unit with compressors and hydraulic soundproofing panels - Ambient temperature range down to -20 °C - Buffer tank and twin P2 pump - Metal mesh protective filter for condenser coils (factory installed) Cooling capacity (kW): 491 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 84 Available delivery head (bar): 1.8 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R513A, GWP 631, Safety classification A1. Number of refrigeration circuits: 2 Number of compressors: 2 Capacity control (%): stepless from 12.5 to 100 Electrical Data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption (kW): 235 Max. current (A): 385 Inrush current circuit (A): 467 Protection class: IP54 Dimensions: Length (mm): 4449, Width (mm): 2191, Height (mm): 2536 Weight (kg): 4974 Connection: Victaulic DN 125 Serial No.: 2200399999 Year of manufacture: 2023 Condition: Visual: 2, Technical: OK & tested Used Price: On request, in EUR (plus VAT, ex-Netetatal) – 3 months warranty MTA offers, on request and together with the buyer, a functional test of the chiller prior to collection at the Nettetal branch. Used machines may show visual defects due to prior use. (Subject to technical modifications and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Būklė: naudotas, System: Used piston diaphragm high-pressure pump / feed pump Type: HMD-G-50-500 Flow rate: 40.0 m³/h Lhodpfxjdkdi Ts Am Hof Pressure: 1.6 MPa

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus,

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, bendras ilgis: 2 750 mm, bendras plotis: 2 800 mm, bendras aukštis: 1 830 mm, vietos reikalavimas ilgis: 2 800 mm, reikalingas plotis: 2 850 mm, reikalingas aukštis: 1 900 mm, variklių gamintojas: Bitzer, tūrio srautas: 940 m³/val, Two used Bitzer screw compressor skids for low temperature applications with Freon. Both skids are supplied with a shared control cabinet. Originally, each skid served its own freezer room, but the capacities listed in the specifications are combined values. Lhedpfxjx Ap Hpe Am Hjf Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid offers a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 is supplied with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid provides a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, For sale: (For additional comprehensive technical data, see PDF) Technical details of the machine: - Long-tube filling system with 40 filling valves and 8 centering bells. - Pre-evacuation system to reduce oxygen intake. - Hygienic bottle table and stainless steel components for durability. - Mechanical adjustment range: 3,000 to 15,000 bottles/hour. - Performance range: 0.33l LN 3,000–13,500 bottles/h, 0.5l NRW 3,000–12,000 bottles/h - Low oxygen pickup: max. 0.02 mg O2/l. - Change parts available for various bottle types (0.33l longneck, 0.33l Steinie, 0.5l NRW) Advantages of the machine: The machine offers numerous benefits that enhance the quality of the filling process. Ljdpswqz Nnefx Am Hohf - Smooth, product-friendly filling under CO2 atmosphere. - 50-60% lower CO2 consumption compared to short-tube fillers. - High durability thanks to reinforced drive components. - Hygienic design facilitates cleaning. - Short changeover times. - Convertible to cans according to the manufacturer (conversion kit not included). Few operating hours: run 3 days a week for 7 hours each; 4 days occasionally used. Annual maintenance carried out by the manufacturer. The machine is immediately available, having only been removed from production about 5 months ago. Original price was approximately €330,000.

Gamybos metai: 1991, būklė: beveik kaip naujas (naudotas), bendras svoris: 1 420 kg, sukimosi greitis (maks.): 1 485 aps./min, 3 pieces stainless steel volute casing pump in process design 2 x CPK-CM 250-315 Year of manufacture: 1991 1 x CPKN-C1 250-315 Year of manufacture: 2011 !!! Price per unit !!! Pumps were operated on a test bench and all have very few operating hours! See pictures!! Flow rate: 1001 m³/h (278 liters/second) Head / Discharge pressure: 18 m / 1.8 bar Pump speed: 1485 rpm NPSH: 5.00 m Shaft seal: single-acting mechanical seal with barrier water Manufacturer: Burgmann Impeller type: closed radial impeller Impeller diameter: 324 mm Bearing type: rolling bearings Lubrication: oil Oil level monitoring: oil level regulator Lhodpfsqabiaox Am Hsf Materials: 1.4408 (AISI 316) Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: tempered steel C45+N Impeller: 1.4408 (AISI 316) Bearing support lantern: cast iron JL1040 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 300 Discharge nozzle nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure discharge side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Baseplate: painted cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 rpm Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power P2: 75 kW Thermal class: F Motor protection rating: IP55 Power factor (cos phi): 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Gamybos metai: 1993, būklė: labai geros būklės (naudotas), 2 vnt. išcentrinės siurbliai Gamintojas: KSB Modelis: WKF 50/7 Našumas: 5,5 l/s (19,8 m³/h) Kėlimo aukštis: 214 metrų (21,4 bar) Maksimali temperatūra: 130°C Sandarinimas: Sandarinimo žiedas su apsaugine vandens jungtimi Ledpfx Ameibwars Hjhf Elektros variklis: VEM Variklio galia: 30 kW Sukimosi greitis: 2935 aps./min. ! Kaina už vienetą !

Gamybos metai: 2009, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 120P1109, OFFER 21407 Motorized tank rotating device with rail-mounted undercarriage Technical data: - Total load capacity (powered + idler unit): 40,000 kg - Load capacity per tank turning unit: 20,000 kg - Workpiece diameter approx.: 500 - 3,500 mm Lsdpohcnhmofx Am Hehf - Center distance of support rollers adjustable via trapezoidal spindle - Roller diameter: 500 mm - Roller width: 150 mm - Powered unit with dual-sided drive - Infinitely variable rotation speed control - Handheld remote control for forward and reverse - Drive: 400 V - Both units are mounted on rail undercarriages - Space requirement powered unit approx.: W 3,800 x H 1,150 x D 1,350 mm - Space requirement idler unit approx.: W 3,600 x H 1,150 x D 1,350 mm - Weight powered unit approx.: 2,500 kg - Weight idler unit approx.: 1,800 kg

Būklė: naujas, *TECHNICAL SPECIFICATION:* Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water / glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm Ledpfog Ezarex Am Hohf 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS:* - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: The system automatically warns and then shuts down in case of incorrect water/glycol mixture) - Pressure-controlled cooling water regulator (INFO: Significantly more precise than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free option available) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS:* - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test specimen draining via compressed air - Cooling water monitoring - Supply pressure limitation - Further custom options possible upon request and technical review Visit our website for more details or other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requests differing from the standard are listed in the quotation or order confirmation.*

Gamybos metai: 2016, būklė: naujas, 1 piece of completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815 All gearbox components have been renewed except for the housing! Jaw coupling: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil filling: 170 kg Input speed: n1 = 1400 Output speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Lodpfx Amegwlrdj Hshf Overall height h2: 925 mm Base length: 1170 mm !! Gearbox does not have an oil cooler !!