Sraigtiniai kompresoriai pirkti naudotą (853)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: CAI226536, bendras svoris: 810 kg, darbinis slėgis: 8 juosta, aplinkos temperatūra (maks.): 40 °C, TECHNINĖ INFORMACIJA Darbinis slėgis: 8 bar Didž. įėjimo temperatūra: 40 °C Maks. aplinkos temperatūra: 40 °C ĮRENGINIO DUOMENYS Pgsdpfxeyfgxio Af Neg Svoris: 810 kg Įtampa: 400 V Dažnis: 50 Hz Galia: 55 kW 3 fazės

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AII 31.3506, galia: 22 kW (29,91 AG), slėgis (maks.): 7,5 juosta, sukimosi greitis (maks.): 3 000 aps./min, MAŠINOS DUOMENYS Psdpfxsydnxuo Af Njgg Galia: 22 kW Variklis Variklio galia: 30 kW Didžiausias sūkių skaičius: 3 000 aps./min. Laisva oro tiekimo apimtis: 83 l/s Maksimalus galutinis slėgis: 7,5 bar

Sąlyga: naudotas, Gamybos metai: 2012, veikimo valandos: 64 000 h, Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: BA27450001, Geros būklės, prižiūrėtas sraigtinis kompresorius Gardner Denver VS40. Šiuo metu atjungtas ir sandėliuojamas sandėlyje. Pjdpfxexxap Hs Af Nogg

Sąlyga: naujas, Gamybos metai: 2026, CORMAK LUFT 1500 VSD+PM Compact Screw Compressor with Dryer – a compact set for demanding applications – ENERGY SAVER SET INCLUDES: - LUFT 1500 VSD+PM COMPACT Screw Compressor with integrated dryer. - Horizontal 500 L Compressed Air Receiver. Key features that set these models apart: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series use Permanent Magnet motors. Compared to standard induction motors: - They provide efficiency levels compliant with IE4 or even IE5 standards. - Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range). - Are smaller, lighter, and generate less heat. 2. Advanced Variable Speed Drive Control (VSD) The heart of the Energy Saver line is the frequency inverter (VSD). - Demand-adaptive: The compressor does not work in a fixed "on/off" (load/unload) cycle. If your facility requires only 30% output, the compressor reduces RPM accordingly, consuming proportionally less energy. - Idle-running elimination: Conventional compressors often continue to run for several minutes after filling the tank, drawing about 25–30% of nominal power without producing compressed air. Energy Saver models almost completely eliminate this wasteful operation. 3. Soft Start Thanks to the VSD, these units start up smoothly from 0 Hz. This means no sudden current surges during start-up, which: - Protects your factory’s electrical installation. Pedpfx Afoychbas Nsgg - Allows for more frequent start/stop cycles without risk of motor winding overheating. 4. Real Savings In practice, using the Energy Saver line enables reduction of electricity bills by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains a very stable network pressure (accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: the absence of sudden pressure and temperature fluctuations extends the lifespan of the screw stage. Technical specifications Motor power: 11 kW / 15 HP Voltage: 400V/50Hz Output at 0-6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet connection diameter (G): 1" Dimensions: 1600 x 740 x 1750 mm Weight: 500 kg

Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, CORMAK LUFT 1000 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications - ENERGY SAVER THE SET INCLUDES: - LUFT 1000 VSD+PM COMPACT SCREW COMPRESSOR with integrated dryer. - 500 L horizontal compressed air receiver tank. Key features that distinguish these models: 1. Permanent Magnet Motor Technology (PM) Most compressors from the Energy Saver series use permanent magnet motors. Compared to standard induction motors: - They feature efficiency compliant with IE4 or even IE5 standards. - They maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range). - They are smaller, lighter, and generate less heat. 2. Advanced Inverter Control (VSD) Pgodeycg Ufspfx Af Nsg The heart of the Energy Saver line is the frequency converter (inverter). - Demand-based operation: The compressor does not work in an “all or nothing” (load/unload) system. If your machine only needs 30% capacity, the compressor reduces speed and consumes proportionally less energy. - Elimination of idle mode: Traditional compressors often run for several minutes after filling the receiver, drawing approx. 25–30% of nominal power without producing air. Energy Saver models almost completely eliminate this wasteful process. 3. Soft Start With the inverter, these devices start smoothly from 0 Hz. This means no sudden spikes in current at start-up, which: - Reduces electrical stress on the plant’s power system. - Enables more frequent start-stop cycles without risking winding overheating. 4. Actual Savings In practice, using the Energy Saver line can reduce electricity bills by 30% to 50% compared to traditional fixed-speed compressors. The system also maintains exceptionally stable network pressure (accuracy up to 0.1 bar), which is crucial for precision equipment such as laser cutters. Longer service life: the absence of sudden pressure and temperature surges extends the lifecycle of the screw stage. Technical Data: Motor power: 7.5 kW / 11 HP Voltage: 400V/50Hz Capacity 0–6 bar: average 990 L/min Capacity at 6 bar: 990 L/min Capacity at 8 bar: 950 L/min Capacity at 10 bar: 950 L/min Outlet connection diameter (G): 3/4" Dimensions: 1495 x 600 x 1600 mm Weight: 350 kg

Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, CORMAK LUFT 1000 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications - ENERGY SAVER SET INCLUDES: - LUFT 1000 VSD+PM COMPACT Screw Compressor with integrated dryer - 270 L Horizontal Compressed Air Receiver Key features distinguishing these models: 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series utilize Permanent Magnet motors. Unlike standard induction motors: - They achieve efficiency levels compliant with IE4 or even IE5 standards. - They maintain high efficiency even at very low speeds (standard motors lose efficiency outside their nominal range). - They are smaller, lighter, and generate less heat. 2. Advanced Variable Speed Drive (VSD) Control The core of the Energy Saver line is the frequency inverter (VSD). - Demand-based adaptation: The compressor does not operate in an “all-or-nothing” load/unload mode. If your machine only requires 30% capacity, the compressor reduces its speed, consuming proportionally less energy. - Elimination of idle running: Traditional compressors continue running for several minutes after the tank is filled, consuming about 25–30% of nominal power while producing no air. Energy Saver models virtually eliminate this wasteful process. 3. Soft Start Function Thanks to the inverter, these units start smoothly from 0 Hz. This means no current surges during startup, which: - Reduces stress on the facility’s electrical installation - Allows more frequent starting and stopping without risking motor winding overheating 4. Real Savings In practice, using the Energy Saver line can reduce electricity bills by 30% to 50% compared to conventional fixed-speed compressors. Additionally, the system maintains extremely stable network pressure (accurate to 0.1 bar), which is crucial for precision equipment such as laser cutters. Longer service life: The absence of pressure and temperature spikes extends the screw unit’s lifespan. Technical Data: Motor power: 7.5 kW / 11 HP Voltage: 400V/50Hz Capacity at 0-6 bar: average 990 L/min Capacity at 6 bar: 990 L/min Capacity at 8 bar: 950 L/min Capacity at 10 bar: 950 L/min Outlet connector diameter (G): 3/4" Psdpfxjycg Tne Af Nogg Dimensions: 1495 x 600 x 1440 mm Weight: 290 kg

Sąlyga: naujas, Gamybos metai: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications – ENERGY SAVER SET INCLUDES: - LUFT 700 VSD+PM COMPACT SCREW COMPRESSOR with integrated dryer - 500 L horizontal compressed air receiver tank Key features distinguishing these models: 1. Permanent Magnet Motor Technology (PM) Most compressors from the Energy Saver series utilize Permanent Magnet motors. Unlike standard induction motors: - They achieve efficiency levels compliant with IE4 or even IE5 standards - They maintain high efficiency even at very low RPMs (standard motors lose efficiency outside their nominal range) - They are smaller, lighter, and generate less heat 2. Advanced Variable Speed Drive (VSD) Control At the heart of the Energy Saver line is the frequency inverter (VSD). - Demand-based adjustment: The compressor does not operate in an "all or nothing" (load/unload) system. If your machine only requires 30% output, the compressor will reduce speed, consuming proportionately less energy. Podpfoycg Ryex Af Nsgg - Idle running eliminated: Classic compressors often run for several minutes after the tank is filled, consuming around 25–30% of nominal power without producing air. Energy Saver models virtually eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these devices start smoothly from 0 Hz. This means there are no sudden current peaks at startup, which: - Protects your facility’s electrical installation - Allows for more frequent starts and stops without risking winding overheating 4. Real Savings In practice, the Energy Saver series allows you to cut electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable line pressure (accuracy of up to 0.1 bar), essential for precision tools such as laser cutters. Extended service life: The absence of sudden pressure and temperature spikes prolongs the screw stage’s lifespan. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Free air delivery 0-6 bar: approx. 690 L/min Free air delivery at 6 bar: 690 L/min Free air delivery at 8 bar: 650 L/min Free air delivery at 10 bar: 650 L/min Outlet connection diameter (G): 1/2" Dimensions: 1840 x 640 x 1470 mm Weight: 320 kg

Sąlyga: naujas, Gamybos metai: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications - ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT Screw Compressor with integrated dryer. 270 L Horizontal Compressed Air Receiver Tank. Here are the key features that set these models apart: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series utilize Permanent Magnet motors. Unlike standard induction motors: They offer efficiency levels compliant with IE4 or even IE5 standards. Pjdsycg I Sspfx Af Nogg Maintain high performance even at very low rpm (standard motors lose efficiency outside their nominal range). They are smaller, lighter, and generate less heat. 2. Advanced Inverter Control (VSD) The heart of the Energy Saver line is the frequency inverter (VSD). Demand-based operation: The compressor does not operate in a simple on/off (load/unload) mode. If your machine only requires 30% capacity, the compressor reduces its speed accordingly, consuming proportionally less energy. Idle run elimination: Classic compressors often operate for several minutes after the tank is full, using approx. 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process entirely. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means there are no sudden current surges during startup, which: Protects your facility’s electrical installation. Allows for more frequent start/stop cycles without the risk of winding overheating. 4. Significant Energy Savings In practice, using the Energy Saver line allows electricity bills to be reduced by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable network pressure (accurate to 0.1 bar), which is crucial for precise devices such as laser cutters. Longer service life: The absence of sudden pressure and temperature fluctuations extends the lifespan of the screw block. Technical specifications Motor Power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Output 0-6 bar: avg. 690 L/min Output at 6 bar: 690 L/min Output at 8 bar: 650 L/min Output at 10 bar: 650 L/min Outlet port diameter (G): 1/2" Dimensions: 1495 x 520 x 1340 mm Weight: 250 kg

Sąlyga: naujas, Gamybos metai: 2026, CORMAK LUFT 1000 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in your workshop, paint shop, or a small production line? The CORMAK LUFT 1000 VSD+PM screw compressor is the perfect choice. With a 7.5 kW motor and an impressive actual capacity of up to 990 l/min, it ensures a continuous supply of compressed air essential for efficient operation of impact wrenches, blow guns, and paint tools. This 400V model is designed for continuous operation, making it ideal for demanding applications such as smaller workshops, tyre services, or crafts. Investing in a CORMAK screw compressor is a step towards significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 1000 VSD+PM features a reliable and robust direct drive system, eliminating vibrations and the need for belt tension adjustments. This proven solution guarantees stable performance and long service life, providing direct power transfer from the motor to the screw module. Psdpeycc Egofx Af Nogg The maximum pressure generated by this screw compressor is 10 bar. Total control over all operational parameters is facilitated by an intuitive MAM series electronic control panel, giving you access to key compressor data, increasing flexibility and operational oversight. Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400V/50Hz Output at 0-6 bar: average 990 L/min Output at 6 bar: 990 L/min Output at 8 bar: 950 L/min Output at 10 bar: 950 L/min Outlet connection diameter (G): 1/2" Dimensions: 900 x 600 x 840 mm Weight: 120 kg

Sąlyga: naujas, Gamybos metai: 2026, CORMAK LUFT 700 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Pgodpfoycctqsx Af Neg Are you looking for a professional solution to supply pneumatic tools in your workshop, paint shop, or small production line? The CORMAK LUFT 700 VSD+PM screw compressor is the perfect choice. With a 5.5 kW motor and an impressive actual output of up to 690 l/min, it ensures a reliable supply of compressed air essential for the efficient operation of impact wrenches, blow guns, or paint tools. This model, powered by 400V, is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire services, or crafts. Investing in a CORMAK screw compressor is a step towards significantly improving your working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable performance. The LUFT 700 VSD+PM features a reliable direct-drive transmission system, eliminating vibration and the need for belt tension adjustment. This proven solution guarantees stable operation and long service life, ensuring direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over the unit's operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor information and enhancing flexibility and process control. Technical specifications Motor Power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Output at 0-6 bar: avg. 690 L/min Output at 6 bar: 690 L/min Output at 8 bar: 650 L/min Output at 10 bar: 650 L/min Outlet Connector Diameter (G): 1/2" Dimensions: 800 x 520 x 740 mm Weight: 100 kg

Sąlyga: naujas, Gamybos metai: 2026, LUFT 1500 VSD+PM COMPACT sraigtinis kompresorius su šaldytuvo tipo suspausto oro džiovintuvu. CORMAK LUFT serijos lenkiško gamintojo sraigtiniai kompresoriai sujungia moderniausius pneumatikoje taikomus sprendimus su aukštos kokybės medžiagomis ir komponentais. Žemos eksploatacinės sąnaudos, paprastas naudojimas, ergonomiška ir tvirta konstrukcija bei didelis našumas – visa tai garantuoja efektyvų ir patikimą darbą. Techniniai parametrai: Psdpfxsyb Dmij Af Negg Variklio galia: 11 kW / 15 AG Įtampa: 400V/50Hz Našumas prie 0-6 bar: vidutiniškai 1650 l/min Našumas prie 6 bar: 1580 l/min Našumas prie 8 bar: 1320 l/min Našumas prie 10 bar: 1230 l/min Išėjimo jungties diametras (G): 1" Matmenys: 1600 x 740 x 1050 mm Svoris: 380 kg

Sąlyga: naujas, Gamybos metai: 2026, LUFT 1000 VSD+PM COMPACT sraigtinis kompresorius su suslėgto oro šaldytuvo džiovintuvu. Lenkų prekės ženklo CORMAK LUFT serijos sraigtiniai kompresoriai – tai pažangiausi pneumatikoje naudojami sprendimai, derinant aukštos kokybės medžiagas ir komponentus. Žemos eksploatacinės išlaidos, paprastas valdymas, ergonomiška ir tvirta konstrukcija bei didelis našumas užtikrina efektyvų ir nepertraukiamą darbą. Techniniai duomenys: Variklio galia: 7,5 kW / 11 AG Įtampa: 400V/50Hz Našumas (0–6 bar): vidutiniškai 990 l/min Našumas prie 6 bar: 990 l/min Našumas prie 8 bar: 950 l/min Našumas prie 10 bar: 950 l/min Pgsdpfxjybz Sps Af Neg Išėjimo jungties skersmuo (G): 1/2'' Matmenys: 1470 x 620 x 900 mm Svoris: 130 kg

Sąlyga: naujas, Gamybos metai: 2026, The LUFT 700 VSD+PM COMPACT oil-lubricated compressor with dryer stands out thanks to its traditional belt-driven transmission, which allows for much easier maintenance and lower service costs. Replacing the belt is simpler and less expensive than repairing a direct-drive system, and in case of wear, the belt can easily be replaced with a new one. This design also ensures a longer lifespan for the components. The lack of a rigid connection between the motor and the compressor’s working parts reduces wear and mechanical stress. The maximum pressure generated by this screw compressor is 10 bar. Full control over the machine’s operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key device information, increasing both flexibility and process oversight. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Psdpfxoybvkaj Af Nsgg Output at 0–6 bar: average 690 L/min Output at 6 bar: 690 L/min Output at 8 bar: 650 L/min Output at 10 bar: 650 L/min Outlet diameter (G): 1/2" Dimensions: 800 x 520 x 740 mm Weight: 95 kg

Sąlyga: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Naudotas Mark kompresorius su džiovintuvu. Naudotas, geros techninės būklės. Paruoštas atsiėmimui. Podpswprvijfx Af Negg

Sąlyga: naudotas, Kompresorius Gamintojas: Atlas Copco Pjdpfx Asyaak Iof Negg Modelis: GX7 Darbo valandos: 580 h

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, Kompresorius: Gamintojas: Kaeser Tipas: SM 12 Pagaminimo metai: 2016 Galia: 7,5 kW Pjdswx I Ruspfx Af Nsgg Darbinis slėgis: 8 bar Šaldymo džiovintuvas: Gamintojas: Kaeser Tipas: ABT 12 Pagaminimo metai: 2016 Šaltnešis: R-134a Bakelis: Gamintojas: BWB Behälter-Werk Pagaminimo metai: 2016 Maks. slėgis: 11 bar Talpa: 270 litrų Po alyvos ir filtro patikros (pakeista) Puiki techninė būklė! KAINA SUMAŽINTA NUO 4950 IKI 3950 EURŲ!!!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, ALUP ALLEGRO 76 10 sraigtinis kompresorius, įrenginys su dažnio keitikliu, po serviso. Techniniai duomenys: Našumas: 12,18 m3/min; Pgsdpfx Aoyfnx Rjf Nsg Variklis: 75 kW; Maksimalus slėgis: 10 bar; Metai: 2019; Darbo valandos: 8 703 h; Kompresorius visiškai veikiantis, su garantija. Grynoji kaina: 32 500 PLN Bendroji kaina: 39 975 PLN Vaizdo įrašo nuoroda žemiau.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, Bebei aliejinis kompresorius ATLAS COPCO ZT37VSDFF su keitikliu ir oro džiovintuvu. Techniniai duomenys: Našumas: 6,07 m3/min; Variklis: 37 kW; Slėgis: 8,1 bar; Darbo valandos: 5670 h Metai: 2019 Pgjdpfjyfnw Tex Af Nsg Teikiame aptarnavimą. Kaina: 65 500 PLN be PVM 80 565 PLN su PVM Žemiau pateikta nuoroda į vaizdo įrašą, kuriame rodoma įrenginio darbas. Užtikriname aptarnavimą.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Pervežamas kompresorius ATLAS COPCO XAHS186, įrenginys su galutiniu oro aušintuvu po pilno serviso. Techniniai duomenys: Našumas: 10,50 m³/min Darbinis slėgis: 12 bar Pagaminimo metai: 2015 Variklis: DEUTZ 105 kW Darbo valandos: 1803 h Kompresorius visiškai veikiantis, paruoštas darbui, su garantija. Kaina be PVM: 112 500 PLN Kaina su PVM: 138 375 PLN Psdpfsyfnvijx Af Nsgg Įrenginys importuotas, idealios būklės. Žemiau nuorodos į vaizdo įrašus.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, S016138 GAMINTOJAS: ATLASCOPCO TIPAS: SF4 FF SERIJOS NR.: API728419 METAI: 2013 GALE (kW): 3,7 NAŠUMAS (m³/min): 0,41 SLĖGIS (bar): 7,75 DARBO VALANDOS (DOC/IŠ VISO): 17 353 KEITIKLIS: ne INTEGRUOTAS DŽIOVINTUVAS: taip ŠILUMOKAITIS: ne AUŠINIMAS (ORAS/VANDUO): vanduo ANT REZERVUARO: taip, 270 L DOKUMENTAI: ne Pgsdpfxjyfg Epo Af Njg PRIJUNGIMAS: 1/2

Sąlyga: labai geros būklės (naudotas), veikimo valandos: 26 271 h, bendras svoris: 850 kg, tūrio srautas: 231 m³/val, slėgis (maks.): 13 juosta, Įranga: Tipinė plokštelė prieinama, PRODUCER - KAESER MODEL - ASD50 SFC SERIAL NUMBER - 2541 YEAR - 2019 POWER (kW) - 25 CAPACITY (m³/min) - 0.93-3.85 PRESSURE (bar) - 13 Pgjdpfx Afevkca Ns Neg OPERATING HOURS (LOAD / TOTAL) - 26271 / 28531

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: S98531301, bendras svoris: 3 500 kg, tūrio srautas: 709,2 m³/val, slėgis (maks.): 16 juosta, Įranga: Tipinė plokštelė prieinama, We offer: ATLAS COPCO GR110 Technical specifications: S/N: S98531301 Pgodpjv Rllujfx Af Nog Year of manufacture: 2000 Power (kW): 98 Frequency inverter: NO Dryer: NO Capacity (m³/min): 11.82 Pressure (bar): 16 S009438 Option to supply a dryer and tank at an attractive price!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, GAMINTOJAS WORTHINGTON TIPAS RLR50 SERIJOS NR. WCF250815 METAI 2006 GALE (kW) 37 NAŠUMAS (m³/min) 6,63 SLĖGIS (bar) 8 Psdpfsxyi Axsx Af Nsgg DARBO VALANDŲ (APKROVA/BENDRA) 81296/97527 KEITIKLIS ne INTEGRUOTAS DŽIOVINTUVAS ne ŠILUMOKAITIS ne AUŠINIMAS (ORAS/VANDUO) oras ANT REZERVOARO ne DOKUMENTAI ne PRIJUNGIMAS 1 1/2 NAUJAS/NAUDOTAS NAUDOTAS

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, mašinos/transporto priemonės numeris: WCF300810, bendras svoris: 1 300 kg, tūrio srautas: 1 029,6 m³/val, slėgis (maks.): 9,5 juosta, Įranga: Tipinė plokštelė prieinama, PROD.: Brand TYP: RME 110 IVR G7 AIR S/N: WCF300810 YEAR: 2006 Pgodpswn Duzofx Af Nsg POWER (kW): 110 CAPACITY (m³/min): 17.16 PRESSURE (bar): 9.5 FREQUENCY CONVERTER: no BUILT-IN DRYER: no HEAT EXCHANGER: no COOLING (AIR/WATER): yes ON TANK: no DOCUMENTATION: no NEW/USED: USED

Sąlyga: geras (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: ITJ259132, bendras svoris: 412 kg, tūrio srautas: 89,4 m³/val, slėgis (maks.): 13 juosta, Įranga: Tipinė plokštelė prieinama, Siūlome: CREEMERS RCB D 15 IVR Techniniai duomenys: METAI 2019 GALIA (kW) 15 NAŠUMAS (m3/min) 1,49 SLĖGIS (bar) 13 DARBO VALANDOS (DOC/IŠ VISO) 9667 KEITIKLIS taip Psdpfxsv E Hvqj Af Njgg S011479