Filmai pirkti naudotą (854)

Gamybos metai: 1978, būklė: paruoštas naudoti (naudotas), Suitable for PVC films, working width: 940 mm, welding power: 42 kVA, welding area: 940 x 720 mm², throughput: 400 cycles/h, length: 8,000 mm. Hedpfx Aboqu Ubuj Ssni

Gamybos metai: 1965, būklė: paruoštas naudoti (naudotas), Suitable for the production of rigid PVC films with a minimum plasticizer content of 3%. Number of rollers: 5. Supplied with documentation. Retrofit performed in 2003 and 2017. Hedpsquu Ttjfx Ab Soni

Būklė: naujas, Roll splitter for shredding waste rolls made of paper and film - Motor power: 9 kW - PLC-controlled system with two-hand safety interlock - Cutting force: 35 tonnes - Straight version splitting table - Cutting channel: - Max. blade length: 2,000 mm - Max. opening height: 1,200 mm - Machine weight: approx. 4 tonnes - Colour scheme: RAL 5012 - light blue - Hand protection guard in the area of the control panel and on the opposite side - Forklift entry shoes included (for easy transport of the machine by forklift) Hjdpfjtvgzbox Ab Ssni Stock item – available immediately

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, Fully automatic flow pack machine for packaging products—regardless of their length—in complete wrap-around packaging without film overlap. Product feed is via a conveyor belt, with simultaneous wrapping into a center-folded film using a forming shoulder. Product indexing is accomplished by a photoelectric sensor. The infeed conveyor is easily adjustable to accommodate different product widths. Longitudinal sealing is performed by a continuous side sealing unit. The height of the forming shoulder and sealing units is manually adjustable. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is in full working order. Technical specifications: • Transverse sealing bar: 450 mm • Film: center-folded film, approx. 12–80 µm • Maximum outer diameter of film roll: 400 mm • Maximum film roll width: 600 mm • Minimum product length: 120 mm • Minimum product width: 80 mm • Passage height: 200 mm • Working height: 780–930 mm • Power connection: 400 V three-phase, 50 Hz with protective earth • Rated power: 3.5 kVA • Rated current: 5.1 A Hsdpfx Asw Ddb Tsb Seni Viewing and demonstrations can be arranged at our premises by appointment. Functional guarantee, no warranty.

Būklė: naujas, Gamybos metai: 2026, The KDP220TOP sandblaster is a top-quality product, delivering prolonged and reliable operation for users. It enables rapid and efficient cleaning of various types of components. The unit features a top-loading lid supported by telescopic struts, significantly enhancing ergonomics and facilitating the loading of heavy parts. Its 220-liter capacity allows for effective cleaning of large surfaces in a short time. Advantages of our sandblaster model: - Ready for immediate use - Ergonomic sandblasting gun with four interchangeable ceramic nozzles - Large, stable front door with a rubber peripheral seal for safe and dust-free operation - Telescopic struts for improved operator comfort - High-quality integrated rubber gloves - Vent connection - Powerful work area illumination - Four pieces of replaceable window protective film - Sandblasting hose located at the bottom of the collecting container - Suitable for use with various abrasives - Drain outlet for quick material changeover - User-friendly, reliable, and safe to operate Technical Specifications KDP220TOP Technical Data: AIR CONSUMPTION: 400–700 L/min MAXIMUM PERMISSIBLE PRESSURE: 8 BAR AIR CONNECTION: 1/4" quick coupler ABRASIVE CONTAINER CAPACITY: +/- 18 kg EXHAUST CONNECTION: 63 mm VIEWING AREA: 540 x 250 mm FRONT HEIGHT: 370 mm INTERNAL CABINET DIMENSIONS (LxWxH min-max): 840 x 550 x 370–550 mm EXTERNAL CABINET DIMENSIONS (LxWxH min-max): 890 x 560 x 1118–1380 mm WEIGHT: 49 kg DC23 Technical Data: MODEL: DC23 VOLTAGE: 220V POWER: 1200W VACUUM: >12 Kpa INLET DIAMETER: 45 mm CAPACITY: approx. 16 l Standard Equipment: - Work area illumination – 12V fluorescent lamp with 230V supply and switch - Two pairs of high-quality integrated rubber work gloves - Two exhaust (vent) connections, 63 mm and 90 mm diameter, for connecting an extraction unit - Sandblasting gun with four interchangeable ceramic nozzles (sizes: 4, 5, 6, 7 mm) - Four pieces of replaceable window protective film - Top lid with peripheral rubber seals for dust-free operation - Sturdy grid on the work area - Polish user manual - DC23 dust extraction unit - 2 m connection hose Hnsdovzqf Uspfx Ab Soi - Bag filter

Būklė: naujas, Gamybos metai: 2026, Cabinet sandblaster with a 220-litre capacity and top-loading via telescopic actuators is designed for blasting and cleaning surfaces from rust, paint, grease, and other contaminants. The top-loading access significantly improves ergonomics when working with heavy components. Standard features include a complete set of nozzles, blasting gun, and protective window film. Cabinet sandblasters are essential equipment for metalworking, automotive, construction, and shipbuilding industries. With its generous capacity and adjustable sand stream adapted to the surface type, this machine ensures quick and efficient surface cleaning. Advantages of Our Sandblasting Cabinet Model: Ready-to-use complete unit Ergonomic blasting gun with 4 interchangeable ceramic nozzles Large, stable front door with a full rubber seal for safe and dust-free operation Telescopic actuators for enhanced working comfort High-quality integrated rubber gloves Air vent connection Powerful workspace illumination 4 pieces of replaceable protective window film (visor) Sandblasting hose positioned at the bottom of the collection tank Compatible with various abrasive media Drain port allows quick change of blasting material Easy operation, reliability, and workplace safety Hjdsm Ncblepfx Ab Sjni Technical Specifications: KDP220TOP Technical Data AIR DEMAND: 400–700 L/min MAX PRESSURE: 8 bar AIR CONNECTION: 1/4" quick coupling ABRASIVE TANK CAPACITY: approx. 18 kg VENT CONNECTION: 63 mm VIEWING AREA: 540 x 250 mm FRONT HEIGHT: 370 mm INTERNAL CABINET DIMENSIONS (LxWxH min–max): 840x550x370–550 mm EXTERNAL CABINET DIMENSIONS (LxWxH min–max): 890x560x1118–1380 mm WEIGHT: 49 kg Standard Equipment: Field lighting – 12 V fluorescent lamp with 230 V power supply and switch 2 pairs of high-quality integrated rubber work gloves 2 vent/air extraction ports (diameters: 63 mm and 90 mm) for connecting an extraction system Sandblasting gun with 4 interchangeable ceramic nozzles: sizes 4, 5, 6, 7 mm 4 replaceable protective viewing films Top door with rubber seals for dustless operation Sturdy grid work table Instruction manual in Polish Please note: The unit requires self-assembly. The listed price is NET. Transport costs are not included. For more information, feel free to contact us by phone or email. We invite you to view our offer on our website.

Būklė: naudotas, Gamybos metai: 1989, About Bickel – HK 3/50 The Bickel HK 3/50 is a high-performance flexographic printing press for narrow web applications, specifically designed for label and packaging production. This machine is ideally suited for printing on a wide range of substrates, including paper, film, and foil. Key features of the HK 3/50 include its compact design, high-speed printing capabilities, and advanced ink system. Among its notable advantages are its ability to deliver high-quality prints at high speeds, making it an ideal solution for manufacturers of labels and packaging. Typical applications of the HK 3/50 include printing labels, stickers, and packaging materials for the food, beverage, and pharmaceutical industries. Hnedpfx Aox Exatjb Soi Key Technical Specifications: Dimensions and Specifications: The Bickel HK 3/50 features a compact footprint of 3.5 meters in length, 1.5 meters in width, and 2.2 meters in height. The machine weighs approximately 2,500 kilograms and offers a maximum web width of 330 millimeters. The maximum printing speed is 200 meters per minute. Web Handling: The HK 3/50 is equipped with a 3-spindle unwinding system, allowing for a maximum unwind diameter of 1,000 millimeters. The machine features a servo-driven rewinding system with a maximum rewind diameter of 800 millimeters. The web handling system also includes a web guiding system and a corona treatment unit. Printing Unit: The HK 3/50 comes with 3 to 6 printing units, each with a maximum print width of 330 millimeters. It uses the flexographic printing process with a resolution of 508 dpi.

Gamybos metai: 2013, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Overwrapping / Cellophane Wrapping Machine manufactured by Sollas Holland B.V., Model SOLLAS 20, Year 2013 A compact, reliable packaging machine for high-quality cellophane/film overwrapping of individual items or bundles. Technical data Machine type: Overwrapping / Cellophane Wrapping Machine Manufacturer: Sollas Model: 20 Control: PLC with touchscreen (Siemens or Rockwell) Drive: Cam / Servo Capacity: up to 50 cycles/min Working pressure: 6 bar Air consumption: 4 nl/stroke Power consumption: 2.5 kW Maximum film roll diameter: 320 mm Product size range (standard): Min.: 45 × 40 × 16 mm Max.: 300 × 200 × 96 mm Film material: PP, coated paper, standard heat-sealable materials Machine weight: approx. 950 kg Machine colour: RAL 9010 (white) Equipment Servo-controlled film feed Cam mechanism – robust & low-maintenance Single-sided infeed and outfeed (one level) PLC control system with touchscreen Trailing-edge seal system Quick format change (approx. 10–20 min) Cost-effective change parts Compatible parts with Sollas 17/19/S(X) Series Options / Extensions Tear-tape applicator Print mark registration Film slitting Various feeding systems Stainless steel housing Special sealing (spot/stripe) Universal folding section Integration into upstream and downstream equipment (cartoner, case packer, banding machine, etc.) Operational advantages Hodeyhc Dyopfx Ab Ssni Very reliable technology Compact design Flexible format ranges Rapid changeover Ideal for small to medium batch sizes Low operating costs Proven industrial solution with worldwide spare parts availability Condition Used Technically inspected Fully functional Ready for immediate use Further photos and videos available! Shipping terms: loaded free onto truck, ex-works location Loading: possible by forklift Transport/dismantling: can be organized Contact For inquiries, simply write or call: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Subject to prior sale and error All prices net plus VAT.

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: V1 01HOHS300KET5ESGR0SZ580, garantijos trukmė: 12 mėnesiai, The machine is generally always in stock with us, allowing for short delivery times. Features of the machine 1. Chain conveyor belt, 2.5 meters long (other lengths available upon request) 2. Adjustable bag former 3. Double film reel + automatic film centering device 4. Rotary end sealing, single sealing jaw 5. Heavy-duty, central fin seal structure 6. Four servo drive units - Active material feeding shaft - Central sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of 304 stainless steel 10. Documentation in national language 11. Print mark control Hsdpfxoq Ikgks Ab Sjni 12. Programmable bag length 13. Standard operating direction: left to right Technical Parameters 1. Product length: L40 - 300 mm 2. Product width: W30 - 160 mm 3. Product height: H5 - 60 mm 4. Packaging speed: up to 300 products/min (depending on product, bag length, film material, and number of sealing jaws) 5. Maximum film width: 500 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Overall power: approx. 7.5 kW 8. Machine weight: approx. 450 kg 9. Machine dimensions: approx. 4250 x 990 x 1650 mm

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, garantijos trukmė: 12 mėnesiai, Production Orientation: Vertical Conveying System: Infeed and outfeed optional and dependent on the product Film Feed: Rear Forming Shoulder: Fixed Operator Display: Touchscreen with memory function Hnjdeq Ikhaopfx Ab Sei Drives & Control: 3 servo motors and PLC control Package Length: 50-190 mm Package Width: 50-150 mm (depending on film width) Package Height: Depending on forming shoulder Speed: 15-30 bags/min, depending on material, package size, and product Film Width: 110-320 mm Power Consumption: approx. 4.6 kW Machine Material: 304 stainless steel with surface treatment Printer Mount: Suitable TTO or ink wheel printer optional at additional cost Delivery Time: Current delivery time under 10 weeks Z Conveyor System €8,500 Features: Stainless steel design, also suitable for the food industry • Application for granules and small parts such as screws • Industries: Pet food, food (coffee, nuts), metal industry • Simple touchscreen control via color icons • Safety protection covers • Can be combined with upstream and downstream machines • Customer-specific modifications/designs on request • 12-head weigher integrated, 0.8L hopper Additional options (on request and at extra charge): • Euro slot punch, etc. Production orientation: vertical

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Flowpack, Gamybos metai: 2023, - Short delivery time, under 10 weeks! - Model Name: Rotection Flow Wrapper PU Hnedpfxoq Ikfms Ab Sji Features: Steel frame / stainless steel construction, manual reel holder fixing without compressed air, automatic roll centering for precise application, automatic stopping for empty products (no product – no bag), easy touchscreen operation via color icons. Continuous product feeding via sensor control, print mark sensor included, safety protection covers. 3-side fin-seal packaging (fin seam), longitudinal seal at the bottom of the bag, rotating cross-sealing system. Compatible with upstream and downstream machinery, customer-specific modifications and constructions on request. Optional extras (on request and at additional cost): thermal transfer printer for e.g. best-before date, print width up to 60mm, stainless steel version / painting, cooling applications for ice packaging, zig-zag knife, Euro slot punch etc., applications for shrink film (Flow Shrink), gas flushing units for protective atmosphere (to extend product shelf life), automatic product feeding systems, intermittent insertion systems, perforation units (tear string) for easy opening, length-dependent product processing via photocell sensing. Production orientation Horizontal Conveyor system chains or belt conveyor, length as required Film feed from below Forming shoulder flexible and fixed Operator display 10" touchscreen with memory functions, swiveling via cantilever arm for convenient handling Drive & control 8 servo motors and PLC control Packaging length 120–600 mm Packaging width 70–250 mm (depending on film width) Packaging height max. 80 mm (depending on forming shoulder) Speed 25–100 bags/min Film width 200–600 mm Power consumption approx. 7 kW Power supply 220–240 V / 50 Hz / single-phase Machine weight approx. 1000 kg Machine dimensions approx. 5230 x 1380 x 1460 mm Machine material 304 stainless steel Print mark sensor yes External compressed air required yes Printer bracket at additional cost Delivery time current lead time under 10 weeks

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, !! In stock and available immediately – we are happy to advise you !! The Rotection flow wrapping machine is designed for packaging a wide range of products. The large operator display (HMI) allows easy access to all necessary parameters for machine setup, such as bag length, speed, etc. We are happy to perform a test run with your product in advance to provide you with the performance results. Model designation ////: Rotection Flow Wrapper Operator display ////: 6.8" display Drives ////: Servo Packaging length ////: 40–400 mm Packaging width ////: 35–160 mm (dependent on film width) Packaging height ////: dependent on forming shoulder Speed ////: 80–100 bags/min in continuous operation Speed ////: up to 70 bags/min intermittent Film width ////: 90–400 mm Power consumption ////: 5 KW Power supply ////: 220–240 V / 50 Hz / single phase Hnjdpfsinwi Hsx Ab Soi Machine weight ////: approx. 400 kg Machine dimensions ////: approx. 4000 x 930 x 1370 mm Error rate ////: < 5% *The specifications above refer to model RMFP70, a horizontal packaging machine. The gallery shows a selection of different models from our product range. Of course, we also supply state-of-the-art box motion flow wrapping machines. Our engineering team is available to offer expert advice and to provide the ideal packaging solution tailored to your requirements. We can also supply suitable mounting frames for use with thermal transfer printers or provide a complete, compatible printing system as required.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Frey F-Line F223, C-Line, Thom Multi-Line-Loader, Multivac R 530 Vacuum Filling and Packaging Line The line consists of: 1. Frey F-Line F223 Vacuum Filler with 200 l Bin Lifter Manufacturer: Frey Maschinenbau GmbH Model: F-Line F223 Machine no.: F223T1204018 WK Year of manufacture: 2018 Power supply: 400 V, 50/60 Hz Power: 5.5 kW Dimensions: 2050 × 1350 × 2500 mm 2. Frey C-Line Portioning Machine Manufacturer: Frey Maschinenbau GmbH Model: C-Line Machine no.: CLB 1191638 Year of manufacture: 2018 Power supply: 400 V, 50/60 Hz Power: 7 kW Conveyor belt: plastic Belt width: (2×) 290 mm Working width: 155 mm Clearance: 290 × 30 mm Dimensions: 1900 × 1200 × 1400 mm Included equipment: Wolf head system, type WK132, Ø 95 mm Hsdpjyc N Hdofx Ab Sjni Portioning device, Ø 75 mm, working width 160 mm 2 stainless steel trollies with parts: 710 × 500 × 1015 mm 960 × 660 × 1035 mm 3. Thom Multi-Line-Loader Shuttle Conveyor (2 units) Manufacturer: Thom Maschinenbau GmbH Model: Multi-Line-Loader Machine no.: 72392-001-00 Year of manufacture: 2018 Power: 19.75 kW Conveyor belt: plastic Conveyor 1: Belt width: 250 mm Dimensions: 2800 × 800 × 1650 mm Conveyor 2: Belt width: 650 mm Weight: 1360 kg Dimensions: 2650 × 1200 × 1250 mm 4. Multivac R 530 Thermoformer Manufacturer: Multivac Model: R 530 Serial no.: 398 Year of manufacture: 1994 Power supply: 380 V, 3 phase, 50 Hz Current consumption: 31 A Power: 14 kW Film width: (6×) 465 mm Forming die: 175 × 125 × 45 mm Included equipment: Inliner Plastic belts (3× 110 mm) Plastic mesh belt, 480 mm Film scrap suction device (Ø 60 mm × 1110 mm) Dimensions: 9400 × 1150 × 2000 mm 5. Trolley with tank and pump Pump model: TR20 PTT Serial no.: 2009 2077 Year of manufacture: 2020 Pump: Tapflo Tank dimensions: Ø 550 × 1000 mm Complete vacuum filling, portioning, and packaging line for meat products. The set enables efficient processing of fillings and minced meat — from filling and portioning, through conveying, up to automatic thermoforming packaging. The line is based on high-quality equipment from renowned manufacturers Frey, Thom Maschinenbau, and Multivac, guaranteeing high performance, dosing precision, process repeatability, and easy integration into industrial production lines.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, spalvų kanalai: 2 kleuren rechtdoor, popieriaus svoris (min.): 30 g/m², didžiausias popieriaus svoris: 350 g/m², popieriaus plotis (min.): 148 mm, popieriaus plotis (maks.): 520 mm, popieriaus aukštis (min.): 100 mm, popieriaus aukštis (maks.): 365 mm, bendras ilgis: 2 765 mm, bendras plotis: 1 523 mm, bendras aukštis: 1 560 mm, vietos reikalavimas ilgis: 2 765 mm, reikalingas plotis: 1 523 mm, reikalingas aukštis: 1 560 mm, įvesties srovės tipas: trifazis, įėjimo srovė: 20 A, įėjimo įtampa: 200 V, Įranga: dokumentacija / vadovas, 2-color offset press in high-grade construction with hardened and ground gears; cylinders run in class P5 preloaded tapered roller bearings (in pairs) and are lubricated via oil bath and pressure lubrication. B3 format (35 x 50 cm) in conventional standard version (no autoplate and/or cocking), but with an alcohol dampening system featuring large rollers as per SM52 design, delivers excellent print quality. Comes from first owner who did not maintain the machine properly (cosmetically); however, there is an extensive service history available, all conducted by the importer. The last recorded counter reading was 11.6 million in 2003. Due to illness and outsourcing, the previous owner, a print broker, has scarcely used the machine since then. We will check the current counter reading and ensure the machine is functioning properly and reliably. Optionally, dry ice cleaning may be considered, as well as a complete overhaul, because the mechanical condition is exceptionally good. However, these options will increase the price, so the machine is now offered at the lowest-cost option, i.e., "as is," EXW our warehouse in Son, NL. Any type of inspection is, of course, permitted. Hnedpfxsv Nv Taj Ab Sei We guarantee the machine to be free from cracks, cylinder damage and/or repairs, and that the gears are undamaged. The rubber rollers are glazed and must be replaced. The Royce ECO circulating pump and cooling unit for the dampening system shows signs of corrosion. Some specifications (see PDF at the bottom of this page for full specs): - Maximum printing speed: 12,000 sheets per hour - Maximum paper size: 365 x 520 mm - Minimum paper size: 100 x 148 mm or 148 x 100 mm - Maximum printing area: 350 x 510 mm - Blanket size: 500 x 520 x 1.9 mm - Plate size: 400–410 x 510 mm - Dampening roller (film-type system): 1 (62 mm) - Number of ink form rollers: 4 (46, 48, 52, and 54 mm) - Maximum feeder pile height: 850 mm - Maximum delivery pile height: 360 mm - Electrical connection: 3-phase 200 VAC 50 Hz (primary), but supplied with a transformer to convert from 3 x 415/400/380/230 VAC to 200 VAC - Total connected load: 7 kW - Main fuse rating: at least 20A - Dimensions (LxWxH): 2765 x 1523 x 1560 mm - Net weight: 4000 kg

Būklė: geras (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, Baler Dixi 80 SLD, with lift/tip device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Hedpfoygk H Tjx Ab Sjni Pressing cycle: approx. 35 s Throughput: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The baler is in good condition. It has been checked and tested by us. A demonstration video is available on our website or YouTube channel. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for errors or inaccuracies in the details provided. This offer is subject to change, prior sale reserved, and can be withdrawn at any time. Inspections are possible by appointment. Sale ex works, advance payment required. No warranty or guarantee given.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2024, Balers, Bramidan X30 LP, 30 t pressing force – used, as new - : Price ex location: only €12,750 (net) Manufacturer: Bramidan Model: X30 LP Year of manufacture: 2024 Bale size WxDxH (mm): 1200 x 800 x 800 Filling opening WxH (mm): 1090 x 530 Cycle time avg. (s): 25 Dimensions WxDxH (mm): 1760 x 1255 x 1995 Weight (kg): 1450 Stroke (mm): 950 Number of bindings: 4 Binding type: strap / steel wire Bale ejection: automatic Bale weight: Cardboard (kg): 225-325 Plastic film (kg): 275-375 Pressing force: 30 t Material types: Cardboard, plastic film, paper, PET bottles, aluminum cans, steel cans, rigid plastics, textiles, polystyrene. Noise level: 59-60 dB Low-profile baler with high pressing force Suitable for a wide range of recyclables Low overall height High pressing force Very low noise level Up to 80% savings on: volume, space, transport, and CO2 Powder coating ensures durable, clean finishes in various colors Power supply: 3x400V 50Hz 16A Motor (kW): 4.0 Hnjdpfx Abex Uwfys Ssi Previous new price: €17,490 (net) Condition: very good Available: immediately Location: 15745 Wildau (near Berlin)

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Flexographic Printing Machine FlexiCOLOR 1700/1400 (2 colors), Cooper System – Year 2013 – Top Condition, Preserved Price: €6,000 Location: Ostrava, Czech Republic Year of Manufacture: 2013 Condition: Used (briefly in operation), decommissioned for a long period – packed in anti-corrosion film and stored in a crate Description We offer for sale a FlexiCOLOR 1700/1400 flexographic printing machine (2 colors) designed for printing on sheet materials, especially plywood and cardboard. The machine was used only for a short period and was subsequently decommissioned, preserved, packed in anti-corrosion film, and stored in a shipping crate – ideal for safe transport and storage. The machine is equipped with the Cooper system (quick cliché change and precise registration) and smooth speed control via a frequency inverter. It operates with water-based inks (ink tray + two-roller system, easy draining and cleaning). Main Advantages - Briefly used, then preserved (anti-corrosion film + crate) - 2 colors, suitable for standard marking/printing of plywood and boards - Cooper system – fast cliché changes, stable print registration - Frequency inverter – smooth speed adjustment - Water-based inks – easy operation and maintenance Hnsdjyghzhspfx Ab Ssi Capable of printing on irregular shapes (independent feeder adjustment / guide chains) Technical Specifications Model: FlexiCOLOR 1700/1400 Number of colors: 2 Maximum print media width: 1700 mm Printing cylinder width: 1400 mm Cylinder circumference: 905 mm Max. speed: up to 1,800 pcs/h Motor power: 0.75 kW Dimensions (L × W × H): 3,700 × 1,850 × 1,100 mm Weight: 540 kg Application: printing on thick sheets, up to approx. 30 mm Delivery / Inspection The machine is available in Ostrava. Delivery includes protective packaging (anti-corrosion film) and crate.

Būklė: labai geros būklės (naudotas), OPEM Arabella Vacuum Coffee Packaging Line – 250 g – with Gas Flushing & Valve System – Year 2005 Manufacturer: OPEM Model: Arabella Year of Manufacture: 2005 Condition: Very good, fully functional Location: Germany Availability: Immediately available Machine Description For sale is a complete vacuum coffee packaging line for 250 g bags (ground or whole beans). The plant is equipped with: • Vacuum brick packaging system • Inert gas flushing (nitrogen flushing) • Integrated aroma valve system (degassing valve) • Dosing system included • Packaging from film roll • Compact monoblock design • Industrial version “Made in Italy” Hnedpfx Abeynn A Is Sei The machine is ideal for freshly roasted coffee and ensures optimal aroma protection and extended shelf life through the combination of vacuum, gas flushing, and valve. Technical Data • Pack size: 250 g • Packaging type: Vacuum brick pack and soft gas pack bags • Output: approx. 20–30 bags/minute (depending on product) • Gas system: Nitrogen flushing • Valve system: Integrated • Dosing system: Included • Packaging from film roll • Year of manufacture: 2005 Scope of Supply • Main machine OPEM Arabella • Dosing system • Gas flushing unit • Valve application system • Control cabinet / Electrical system Spare parts available

Būklė: naujas, DM1100 2C – Edge Rounding Machine for Laser, Flame-Cut, and Punched Parts. NEW DESIGN – CAN BE VIEWED UNDER POWER – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm in a SINGLE PASS. Hnodpfx Absd Ev Upj Sji The first station processes the workpieces from below using two counter-rotating cross belts, while the second station works from above, also with two counter-rotating cross belts. The cross belts allow deburring of both inner and outer edges of the workpieces. Sharp edges produced during laser cutting, punching, or shearing of steel, stainless steel, and aluminum parts are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its capability to process small parts from 50 mm. By folding up a table, the rotating direction of the upper conveyor automatically reverses, and the gap of the first processing station is bridged, enabling the workpieces to feed directly into the second processing station. Thus, small products measuring from 50 mm up to 150 mm can be processed on one side only. An additional benefit of this machine is the ability to round parts with protective surface film without damaging the film. Easy and tool-free cross belt change. The program for automatic positioning of the upper and lower belts ensures good accessibility and reduces changeover times. User-friendly operation via integrated touch screen. This machine is also available with a return transport system upon request. Technical data: Working capacity (Ø mm) 1100x50 Number of cross-belt stations 2 Cross-belt speed (m/s) 2–8 Feed speed (m/s) 0.6–3.2 Cross-belt motor (kW) (4x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 13.1 Power consumption (A) 30 Extraction connection per head (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Būklė: naujas, DM1100 C Edge Rounding Machine for Laser-, Flame- and Punched Parts Hneded Evcwopfx Ab Sji The DM1100 C performs edge rounding and simultaneously removes sharp burrs from both the inner and outer edges of steel, stainless steel, or aluminium parts after laser cutting, shearing, or punching. The DM1100 C is equipped with double, counter-rotating cross belts with abrasive blocks to uniformly round all edges of the entire product. A major benefit of this machine is the deburring of products with surface protection film, without damaging the film – only the edges are processed. Excellent processing of parts in a wide range of sizes, from small parts starting at 50 x 50 mm up to 1100 mm. Technical Data – DM1100 C: Working capacity (Ø mm): 1100x50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): 3 Feed motor (kW): 0.18 Total power (kW): 6.2 Current consumption (A): 13 Extraction connection per head (Ø mm): 100 Dimensions (mm): 2270x1560x1940 Weight (kg): 1200

Būklė: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. Hsdpfxed Ixadj Ab Seni The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Būklė: naujas, Electric Heated Platen Press Manufacturer: SCM Model: GS 6/90 30-13 Offer type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of heating platens: 2 pcs Max. temperature of heating platens: 120°C Recommended working temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Press cylinder diameter: 70 mm Number of daylight openings: 1 pc Daylight opening approx.: 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminum sandwich platens by ELKOM - Germany. Continuously adjustable up to 120°C, up to 150°C on request. Thermal insulation between platens and press frame. The heating platens are mounted with special brackets to allow necessary thermal expansion. Hydraulics: Compact hydraulic pump by HAWE Germany, integrated in the press frame. 2-stage design for closing and pressure build-up phases. Hydraulic cylinders made from high-grade, tempered, and ground steel with large diameters. Press Frame: The press frame is constructed from heavy-duty, torsion-resistant, stress-relieved welded steel. Presses of the GS series can be loaded from all four sides. Press tables are welded from HEA profiles. Precision machining of all assemblies is performed on state-of-the-art CNC machining centers. Uniform and precise movement of the press table is ensured by rack-and-pinion drives and self-lubricating guides at two corners of the press frame. Control System: Side-mounted control panel with SIEMENS 7'' color touchscreen. SCM's proprietary software enables simple and intuitive control of the press. The following parameters can be programmed, retrieved, and changed: - Automatic calculation of the maximum permissible hydraulic pressing force based on the workpiece size. Hnodpefh Tmmofx Ab Ssi - Ability to store up to 100 programs (temperature, specific pressure, pressing time, platen size). - Direct setting of hydraulic pressure - Option for internet connectivity for remote service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault messages displayed on the screen. OPTIONAL: - Electronic flatness control (misplacement monitoring) - MYLAR film for protection and easy cleaning of electric platens - Surcharge for pressing force 120 t - ELKOM platens with gold anodized finish

Gamybos metai: 2026, būklė: naujas, mašinos/transporto priemonės numeris: neu, Description:  Screening machine on hook-lift with site chassis  Screening in 2 fractions: 0–12 mm and oversize greater than 12 mm  Throughput capacity over 80 m³/h (material-dependent) Foil separation via separation chamber and extraction fan Blower fan positioned adjacent  Discharge conveyor hydraulically foldable  Central control cabinet with networking capability to existing machines (emergency stop) Technical Data:  Transport width: 2,500 mm  Transport height: 2,700 mm  Transport length: 7,800 mm  Screen deck: Area length = 4,240 mm; width = 1,200 mm - Screening area 5.4 m², number of shafts: 32 pcs - Drive: 2 x 7.5 kW gear motors, speed adjustable (frequency inverter) - Screen body: Polyurethane (star screen) - Screen shafts as plug-in system (easy and cost-effective adaptation to other grain sizes possible) - Central lubrication of screen deck bearings (64 lube points)  Hopper: Feed volume approx. 3 m³ - Drive: 2.2 kW gear motor, speed adjustable (frequency inverter)  Discharge conveyor (A-band) and oversize conveyor to be mounted on site via plug-in system - Total installed power: 26.5 kW - Hydraulics: via 24 V battery with integrated charger  Color: black RAL 9017 / green RAL 6018 or according to customer specification Additional Description:  Extraction blower for suction and discharge of suspended plastic films on the screen deck (maximum foil size L = 1,000 mm)  Suction hose D 300 mm  Discharge hose D 350 mm  Fan unit in frame adjacent to screening machine with lashing points and fork slots (for forklift handling)  Control cabinet with ABB frequency inverter 15 kW, external controls (cabinet door) Hnodped Rbyhefx Ab Sei  Networking capability to existing machinery (emergency stop) Delivery time: approx. 25 weeks

Būklė: naudotas, Gamybos metai: 1997, Technical data: Hsdpeyfnrwsfx Ab Ssni Year of manufacture: 1997 Brand: Johannsen Manually operated machine, mobile on swivel castors The machine is powered and can be inspected by appointment! Max. working width: 650 mm Max. clearance: 40 mm Min. clearance: 0.5 mm Set feed height: max. 40 mm Workpiece length: 500 mm – unlimited Working height: approx. 900 mm Drive power: 0.75 kW Feed speed: approx. 7.9 m/min Operating voltage: 400/230 V, 3Ph / N / PE, 50 Hz Accessories / Special equipment: - Underside film coating - Infeed roller conveyor 650 x 1200 mm, mobile, with omnidirectional rollers and adjustable lateral roller stop, not driven - Outfeed roller conveyor 650 x 1200 mm, mobile, with rubberized rollers, driven Machine body (frame construction) with all required safety devices. Safety light grid at infeed and outfeed – easily accessible for film threading 1 film unwind station at the top as standard Feed direction from right to left Operator side on the left in feed direction For film prone to creasing, a spreader roller (available at extra cost) must be used.

Būklė: naudotas, Gamybos metai: 2006, veikimo valandos: 100 h, Funkcionalumas: visiškai funkcionalus, Professional Industrial Cutting System (Longitudinal/Cross) – Grossmann – ONLY 100 Operating Hours! Description: For sale is a high-precision, automated longitudinal and cross-cutting machine from the quality manufacturer Grossmann Maschinenbau. The machine has a total operating time of no more than 100 hours. It is therefore in an almost as-new technical condition with hardly any signs of wear on the mechanical components. Originally designed as a chipboard mat cutting system, its robust construction and versatile PLC control make it adaptable for a wide range of materials (e.g. rubber, cork, fleece, composites, films, textiles, etc.). Hnodpfx Aeylxmfob Ssi Technical Highlights & Equipment: Condition: Almost as new (max. 100 operating hours). Format: Maximum cutting length 2,500 mm x maximum working width 1,200 mm. Complete line: Includes professional unwinder and rewinder for fully automatic material flow from roll to roll or roll to sheet format. PLC control: Professional programming with manual and automatic operating modes selectable. Material handling: Automatic gripper feed brings the material precisely into final position, with integrated edge extraction for perfectly cleaned edges. Operation: Intuitive operation via display, foot switch, and optical/acoustic completion notification (signal light/horn). Precision: Integrated laser for exact material alignment. Safety: Fully enclosed and equipped with modern safety monitoring systems. Versatility: The machine is a true all-rounder for all roll-fed materials needing precise sheet or strip cutting. The sturdy structure on a high-grade aluminium profile system ensures maximum torsional rigidity. Full documentation, including process log, circuit diagrams, and technical drawings, is available. The machine can be viewed and power-tested by arrangement. I will be happy to personally answer any specific technical questions or discuss its suitability for your applications. Contact: Tel.: 05427 9423 20