Popieriaus spauda

BTS-MF500LH Ballenpresse Waste Baler

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF500LH is the ideal baler for compacting your loose cardboard and film waste into bales weighing up to 500 kg. Due to its compact design, it is particularly suitable for areas with limited ceiling height. The baler impresses with its user-friendly and safe operation as well as its large feed opening. By compacting these waste and recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and ensure the material is properly returned to the recycling loop. Pressing force: 50 tonnes Bale weight: up to 500 kg (depending on material) Bale size: 1100 H (var.) x 1400 W x 800 D mm Machine dimensions: 2249 H x 2041 W x 1350 D mm Machine weight: 2100 kg Transport height: 2249 mm Filling opening: 1400 W x 680 H mm Pressing cycle time: 35 seconds Motor: 11 kW, 32 Amp Power supply: 380 - 400 V (3-phase) Noise level: 68 dB PLC control with automatic press cycle, bale-ready indicator, and emergency stop with key Strap bale ejector for easy removal of bales Retainer claws to minimize material spring-back Low overall height, perfect for low-clearance areas Operating hours counter Holder for 6 rolls of strapping tape A quality product “Made in Europe” Suitable for compacting: Cardboard Film Big Bags Cans and PET bottles Guodpfova Ekvsx Ap Ioc Light recyclables Additional options: Annual maintenance with UVV inspection Custom machine color according to RAL Strapping tapes Baler, paper baler, waste paper baler, cardboard baler, cardboard compactor, film baler, paper bale press, waste baler, waste compactor, recyclable press, refuse compactor, bin press, residual waste baler.

Būklė: paruoštas naudoti (naudotas), 🔧 Hauptspezifikationen Schneidsystem: Vierwellen-Konfiguration mit zwei Schneidwellen und zwei Räumwellen. Gedpfx Aewnx Uiep Iouc Schneidscheibendurchmesser: ca. 280 mm (11 Zoll). Abmessungen der Schneideinheit: Arbeitsbreite 1.000 mm, Länge 700 mm. Aufgabeöffnung: ca. 1.400 mm x 1.600 mm. Motorleistung: In der Regel ausgestattet mit zwei 18,5 kW Motoren. Betriebsgeschwindigkeit: Langsamlauf bei ca. 25 U/min für hohes Drehmoment und geringe Geräuschentwicklung. Gewicht: ca. 2.500 kg.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, galia: 1,5 kW (2,04 AG), Tria plastic mill, shredder, granulator for sale in excellent condition Make: TRIA 20-15/BL-T Power: 1.5 kW, 50 Hz, 380 V Year of manufacture: 1997 Guedpfsra N A Nsx Ap Isc Feed opening: 200 x 230 mm Rotating knives: 3 pcs Fixed knife: 1 pc Discharge opening: 60 mm Final product size: 3–5 mm Capacity: approx. 30 kg/h.

Būklė: naujas, Gamybos metai: 2024, ✅ New & In Stock ✅ Up to 100mm Branch Diameter ✅ Shipping Available SCHORR WOOD CHIPPER 100MM BRANCH DIAMETER RR100THX Powerful wood chipper for branches up to 10cm in diameter. Extremely robust and compact. -- 196cc petrol engine with 5.6 HP -- Self-feeding, no pushing required -- 360° discharge chute -- Compact size -- High user-friendliness -- Extremely robust and reliable EQUIPMENT / FEATURES POWERFUL LIGHTWEIGHT The SCHORR RR100THX wood chipper impresses with its practical size, maximizing flexibility for use at various locations. With a width of only 600 mm, the chipper easily fits through any standard doorway and can be used in places that are difficult to access, such as gardens. With an operating weight of just 93 kg and two tubeless wheels, the chipper is easy to store and transport, even in confined spaces. RELIABLE IN EVERY RESPECT The chipper’s high-quality cutting system features 2 blades and 1 counter blade made of high-strength steel. The blade material is designed to meet the chipper's special requirements, offering extreme durability without brittleness. The low feed height of 910 mm makes loading wood easier, and the large feed hopper helps you process large quantities quickly and efficiently. HIGH SAFETY AND OPERATING COMFORT Key safety features such as an emergency-stop bar on the handle and a central emergency-stop button maximize work safety. The integrated anti-debris cover in the feed hopper prevents small wood pieces from flying out of the chute. The engine is equipped with a low-oil sensor, which prevents the engine from starting if the oil level is too low, thus avoiding serious engine damage. The ergonomic design of the controls and easy access to maintenance areas ensure the wood chipper is highly practical for everyday use. LOW FUEL CONSUMPTION A major advantage of the efficient engine is its low fuel consumption, which also reduces environmental impact. The 196cc engine produces less noise than larger machines, making this chipper ideal for residential areas. Technical Data Manufacturer (Brand): SCHORR Model: RR100THX Drive Type: V-belt 13x860Li Max. Branch Diameter: 100mm Chipping System: Drum, self-feeding Number of Blades: 2 + 1 counter blade Net Weight: 93kg Basic Dimensions Total Length: 1450mm Total Width: 600mm Guodpfot Ivaasx Ap Ioc Total Height: 1080mm Discharge Angle: 360º Engine Displacement: 196cc Max. Output: 4.1kW / 5.6HP Starter: Recoil starter Our experienced team is happy to answer any questions you may have regarding the SCHORR WOOD CHIPPER 100MM BRANCH DIAMETER RR100THX. We look forward to hearing from you and assisting you with your needs. Are the upfront costs of a wood chipper too high for you? No problem—we offer leasing as an attractive financing option. Please contact us with any questions regarding our leasing offers.

Gamybos metai: 2006, būklė: beveik kaip naujas (naudotas),

Būklė: naudotas, Gamybos metai: 1992, veleno greitis (min.): 7 500 aps./min, veleno greitis (maks.): 24 000 aps./min, 4 motor-driven grinding spindles (liquid-cooled, with sealing air / oil mist lubrication) including REFU HF frequency converter, e.g., for supplying the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for the power supply of motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as-is – year of manufacture approx. 1992. A collection of various grinding spindle shafts / arbors for grinding wheels are available for these grinding spindles and can be purchased separately. Godsl Tn Afspfx Ap Ijuc Price / details on request. All technical details are subject to errors or omissions. We sell exclusively to countries within the European Community.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, paskutinio kapitalinio remonto metai: 2025, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Gjdpfx Asvf E Avsp Ijuc Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Būklė: naujas, galia: 10,3 kW (14,00 AG), kuro tipas: benzinas, Brugger HX10 Chipper – Powerful, Compact, and Versatile! The Brugger HX10 chipper is the ideal solution for landscaping professionals and hobby gardeners alike who require a powerful yet highly maneuverable chipper. Equipped with a robust 14 HP petrol engine and sturdy construction, the HX10 effortlessly chips branches and trunks with diameters exceeding 10 cm. Whether in private gardens or on larger properties, this chipper delivers reliable performance in every corner! Thanks to its narrow design, the HX10 is perfectly suited for operation in confined spaces. The unit can be easily adjusted and maneuvered by hand, allowing you to work efficiently even in difficult garden areas. With a width of only 80 cm, the HX10 fits through any garden gate. Your benefits at a glance: - Powerful: 14 HP petrol engine for high-performance chipping - Effective: Processes branches and trunks up to and over 10 cm in diameter - Compact and agile: Slim design for easy maneuvering in tight spaces - Easily adjustable: Flexibly adaptable for comfortable operation - Perfect for landscaping: Ideal for use in both private and professional gardens The Brugger HX10 – your all-purpose tool for efficient garden maintenance! Technical data: Dimensions: 140 x 80 x 165 cm (L x W x H) Godpfx Apoumv E Hs Ieuc Weight: 185 kg Blades: 2, 30 cm wide Max. diameter: 10 cm Processing capacity: 4-6 m3/h Feed hopper: 51 x 42 cm --- All prices plus VAT. Contact us for a customized quotation!

Būklė: paruoštas naudoti (naudotas), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical reduction of recyclable material volumes in industrial and commercial applications: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials. DIXI 60 SLD horizontal baler, waste baler with tilting device Technical specifications: - Pressing force: 60 tons - Specific pressure: 6.81 kg/cm² - Power supply: 400V / 7.5kW - Bale dimensions: 800 x 1100 x 1200 mm - Number of bindings: 3 Guodpera A E Ujfx Ap Ijc - Bale weight: approx. 370-410 kg - Binding: manual - Feed opening: 990 x 1110 mm - Machine weight: 5,420 kg - Average press cycle: 47 sec - Year of manufacture: 2011-2016 Dixi 80SLD Baler Technical data: - Make: Dixi - Model: 80 SLD - Pressing force: 80 tons - Drive power: 11 kW, 400 V / 32 A - Hopper opening (W x H): 1040 x 1110 mm - Press cycle: approx. 35 s - Throughput: approx. 1,000 kg/h - Bale size (W x H x L): 1120 x 1120 x 1200 mm - Bale weight: depending on material approx. 500–600 kg - Bale binding: triple, manual - Machine dimensions: - Length: 4,200 mm (+ cage 1,600 mm) - Width: 1,830 mm - Height: 2,620 mm - Machine weight: approx. 8,000 kg - Automatic bale ejection - Robust construction for long-term use - Year of manufacture: 2016-2020 - Weight: approx. 8.4 tons - Condition: Used

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: HBC 140 2x75kW 2001 (210-008-01), spaudimo jėga: 155 t, balo svoris: 1 500 kg, slėgis: 250 juosta, galia: 150 kW (203,94 AG), paskutinio kapitalinio remonto metai: 2024, Įranga: dokumentacija / vadovas, Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Pers (2x75kW) Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststofklep Anti-ratten bekabeling Urenstand 0 na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de ‘Bollegraaf OEM Certified Refurbishment Standards’. Dit omvat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van de revisie Gjdpfjtvau Asx Ap Ijuc Reiniging & demontage Voorafgaand aan de daadwerkelijke revisie wordt de pers volledig gereinigd en in onze revisiewerkplaats gedemonteerd. Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en waar nodig opnieuw gelast. Dit geldt ten minste voor de volgende onderdelen: • Presschuif, • Frame, • Perskanaal, • Voorpersklep Na demontage en inspectie wordt de presschuif opnieuw opgelast en voorzien van nieuwe schuifwielen. De beschermroosters en de voorpersklep worden deukvrij gemaakt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en eventuele reparatie- en laswerkzaamheden, worden alle componenten gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en slangen worden vervangen. De hydraulische componenten worden opnieuw voorzien van pakkingen. De hydrauliekolie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitdozen worden vervangen en opnieuw op goed toegankelijke posities geplaatst. Slijtagedelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het perskanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen voor nieuwe. Cilinders: De cilinders worden opnieuw voorzien van pakkingen en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vervangen door nieuwe. De PLC en HMI (bedieningsinterface) worden vervangen door de nieuwste Schneider M340-versie inclusief de meest recente software.