Presai rulonams pirkti naudotą (184)

Būklė: dilaminuotas dirbtuvėje (naudotas), kamuolio ilgis: 1 200 mm, ryšulio plotis: 700 mm, ryšulio aukštis: 800 mm, balo svoris: 380 kg, Presas idealios būklės, po kapitalinio remonto nenaudotas. Aptarnavimas tik pas gamintoją. Ideali būklė. Visiškai automatinis darbas. Reguliuojamas ryšulio ilgis 600–1200 mm. Variklis 15 kW. 2007 metai. Ryšulio svoris apie 380 kg. Nwsdpfx Abjx S Sbdobjf

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, pildymo angos plotis: 920 mm, pildymo angos ilgis: 1 600 mm, Sveiki, parduodu pilnai veikiantį kanalinį presą Paal Comdec. Mašina prižiūrėta, labai geros techninės būklės. Komplekto sudėtyje yra juostinis transporteris. 2025 m. buvo pakeista transporterio juosta. Nwjdpfx Abjyk Uzpsbef

Būklė: geras (naudotas), Gamybos metai: 1981, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Automatinė kanalinė presas BOA Continu 25 LB + transporterio juosta. Presas geros būklės, reguliariai prižiūrimas. Neseniai visiškai suremontuota Denison siurblys. Veikia nuolat. Susisiekite su mumis dėl papildomos informacijos. Nwedpsw S Tv Uefx Abbof

Būklė: paruoštas naudoti (naudotas), Bramidan 4-0F Variklis: 4 kW Presavimo matmenys: 250 x 100 x 255 cm Balo matmenys: 1100 x 700 x 950 mm Balo svoris: 200–250 kg Spaudimo jėga: 18 t Svoris: 1580 kg Nedpfxjv Ai Uqs Abbswf Įrenginys naudojamas tokių atliekų kaip plėvelė, makulatūra ir kt. tūrio sumažinimui. Kaina: 4500 eur Aventek MK 2500 presas Tai pramoninis presas, skirtas spausti atliekas, tokias kaip: - plėvelė - kartonas / makulatūra - plastikas Spaudimo jėga: 25 t Balo svoris: iki 400 kg, priklausomai nuo medžiagos Balo matmenys: apie 1200 × 800 × 800 mm Ciklo laikas: apie 50 s Maitinimas: 400 V Variklio galingumas: apie 5,5 kW Metai: 2013 Kaina: 6500 eur ORWAK 9020 presas: - variklis 2,2 kW - 380 V - spaudimo jėga 20 tonų - balo matmenys 1100x700x800 mm - balo svoris: priklauso nuo žaliavos, 200–300 kg Kaina: 5500 eur

Būklė: geras (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 4 t, pildymo angos plotis: 730 mm, pildymo angos ilgis: 400 mm, kamuolio ilgis: 700 mm, ryšulio plotis: 350 mm, ryšulio aukštis: 500 mm, balo svoris: 40 kg, bendras plotis: 988 mm, bendras aukštis: 2 033 mm, bendras ilgis: 752 mm, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 230 V, bendras svoris: 380 kg, triukšmo lygis: 60 dB, galia: 1,5 kW (2,04 AG), įėjimo dažnis: 50 Hz, Pilnai veikianti ir patikrinta vertikali presavimo mašina, skirta mažiems kartono arba plastiko kiekiams presuoti. Daugiau informacijos ar nuotraukų galite gauti el. paštu arba telefonu. Nwsdpfxjvy Drxs Abbef

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, spaudimo jėga: 70 t, Įranga: dokumentacija / vadovas, HSM HL 7009 dešinės/kairės pusės horizontalioji presavimo mašina (horizontalus balų presas). Įrenginys yra labai geros būklės ir reguliariai prižiūrimas autorizuoto techninio aptarnavimo centro. Šis balų presas skirtas didesniems atliekų tvarkymo projektams mažmeninėje prekyboje bei mažų ir vidutinių centrinių sandėlių reikmėms. HL 7009 modelio balės turi 1100 x 1100 mm skerspjūvį ir, esant 1200 mm ilgiui, gali sverti iki 600 kg. Tai užtikrina optimalų sunkvežimio naudingo svorio išnaudojimą. Presavimo jėga: 700 kN Specifinė presavimo jėga: 58 N/cm² Variklio galia: 10,5 kW Įtampa / dažnis: 400 V / 50 Hz Teorinė tuščioji talpa: 42,97 m³/val. Pakrovimo angos plotis x ilgis: 890 x 1020 mm Balės plotis x aukštis x ilgis: 1100 x 1100 x 1200 mm Bendras matmuo ilgis x plotis x aukštis: 5366 x 2525 x 2559 mm Balės svoris: 600 kg Nwedpjy D Rxfsfx Abbsf

Būklė: paruoštas naudoti (naudotas), Gniuždymo jėga: apie 700 kN (apie 70 t) Variklio galia: apie 11 kW Nwodera Dddspfx Abbof Maitinimas: 3 × 400 V / 50 Hz Viena ryšulio svoris: iki maždaug 600 kg Ryšulio matmenys: apie 1100 × 1100 × 1200 mm Mašinos matmenys: apie 5,9 m ilgio, 2,5 m pločio, apie 2,6 m aukščio Mašinos svoris: apie 7 t Ciklo laikas: apie 45–47 s Konstrukcinės ypatybės • didelė įkrovimo anga kartonui • galimybė automatiniam užpildymui (pvz., transporterių) • rankinis vielos surišimas (4 vielos) • padėklo fiksacija ir hidraulinės durys ryšulio paėmimui Šios presės privalumai • dideli ryšuliai = mažiau transportavimo • didelė gniuždymo jėga • pritaikyta nuolatiniam darbui Galimi gamybos metai: 2016-2020

Būklė: geras (naudotas), Gamybos metai: 2010, veikimo valandos: 3 641 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 36 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 080 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, galia: 15 kW (20,39 AG), tūrio srautas: 90 m³/val, Technical Data of Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Nodeu Thh Espfx Abbjwf Operating Hours: 3,641 hours Pressing Force (Main Press): 36 t Specific Pressing Force: 467 N/cm² Feed Opening Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput Under Operating Conditions (with material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Tying: 4-fold vertical, semi-automatic, with polyester plastic twine Throughput with Bulk Density of: – 35 kg/m³: 1.8 t/hour – 60 kg/m³: 2.5 t/hour – 100 kg/m³: 3.1 t/hour Transport Dimensions (press only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (press): approx. 4 t Remarks: The baler has been function-tested in our workshop, then placed in storage, and is therefore available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. An inspection is possible by appointment. We do not assume liability for any technical specifications or potential errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, veikimo valandos: 28 748 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 570 kg, bendras svoris: 20 000 kg, alyvos bako talpa: 600 l, galia: 37 kW (50,31 AG), tūrio srautas: 350 m³/val, Technical Data of the Baler: Manufacturer: Presona AB, Sweden Model: LP 60 VH1 Year of Manufacture: 2015 Total Operating Hours: 30,143 hours (as of July 2025) Actual Pump Runtime: 6,527 hours (as of July 2025) Number of Bales Pressed: 115,193 bales (as of July 2025) Pre-Press Force: 25 t Main Press Force: 60 t Specific Press Force: 73 N/cm² Feed Opening Dimensions: 1,500 x 1,100 mm Filling Volume per Press Cycle: 2.7 m³ Theoretical Throughput: 800 m³/hour Throughput Under Operating Conditions: 350 m³/hour Bale Dimensions: 1,100 x 750 mm Drive Power: 37 kW Tying System: 5-fold vertical, fully automatic Throughput at a Bulk Density of 50 kg/m³: 11 to 14 t/hour Bale Weights: 420 to 570 kg, depending on material Hydraulic Oil Tank Volume: 600 L Baler Dimensions Assembled with Hopper: 10,100 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (excluding press): 10,100 x 2,400 x 3,000 mm (L x W x H) Machine Weight (Press): approx. 20 t Condition of the Baler: The baler has been partially overhauled in our workshop and subsequently tested in manual and automatic operation. The following overhaul work was carried out: - Machine cleaned, partially de-rusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four press ram rollers disassembled and renewed - Grease cartridges of the automatic roller lubrication system replaced - Guide rails on the baler floor in the pressing chamber cut out - Floor reinforced with welded plates - New HARDOX guide rails welded in - Wire station and deflection pulleys for lower wire cleaned and serviced - Guide rails from the floor of the press channel cut out - New HARDOX guide rails welded in - Both side walls of the press channel disassembled and de-rusted - Worn side wall plates removed - Complete side walls fitted and welded with new wear plates - Main hydraulic cylinder disassembled and overhauled for inspection - Piston rod replaced, cylinder tube honed - All sealing sets replaced, pressure test performed - Vertical needle system for tying disassembled, cleaned, wire deflection pulleys serviced and maintained - Chain cleaned, greased, tension readjusted - Drillomat cleaned, wire cutter, drilling shafts and drilling fingers checked, retorqued, and serviced - Machine inspected, general maintenance work carried out, and baler tested in both manual and automatic operation Remarks: Nedpfjvn Tg Ijx Abbowf The baler is sold without a conveyor belt and without wire stations. Inspection is possible by prior arrangement. We assume no liability for the technical specifications or any errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, veikimo valandos: 30 408 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 250 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 550 kg, bendras svoris: 16 000 kg, alyvos bako talpa: 600 l, paskutinio kapitalinio remonto metai: 2024, Technical Data – Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales pressed: 198,059 units (as of April) Main press ram force: 50 t Specific pressing force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under operating conditions: 260 m³/hour Feed chute dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³: 6 to 7 t/hour Nedpfju Thhrex Abbowf - 50 kg/m³: 7 to 9 t/hour - 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 L PLC: Telemecanique TSX Micro Operator panel: Schneider Magelis Effective transport dimensions excl. press: 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (press only): approx. 16 t Condition of the baler: The machine underwent partial refurbishment and general maintenance in our workshop. After completion of the refurbishment, the baler was tested in operational mode and is now available for immediate sale. The following refurbishments were carried out: General work: - Machine cleaned, derusted, primed, and partially repainted - Wire entry marks in the press channel openings welded and smoothed Hydraulic unit: - Hydraulic oil tank fully drained, cleaned, and refilled with new oil - Oil and air filters replaced - Leaking oil sight glass on the hydraulic tank replaced - All hydraulic hoses replaced Electrical system: - Program menu language set to English - Two key switches on the operator panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Flap limit switch replaced - Wirthulator electrics renewed, connected, and tested Press ram: - All four guide rollers on the press ram removed and replaced - Main hydraulic cylinder disassembled, overhauled (cylinder tube honed, complete seal kit replaced), leak test performed - All wear-resistant plastic blocks on the press ram replaced Pre-press flap: - Both bearings on the pre-press shaft replaced - Both hydraulic cylinders disassembled, overhauled (cylinder tubes honed, complete seal kits replaced), leak test performed - Scraper flap on the pre-press replaced Tying unit: - Two complete needles with wire guide pulleys replaced - Needles adjusted and set - All wire guide pulleys in needle heads replaced - Twisting fingers replaced - Two twister shafts replaced - All eight wear plates on the twister unit, under the twisting fingers, replaced Scope of delivery: Only the baler is sold. Documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is complete and available. Inspection by appointment possible. We do not accept liability for the technical data or possible errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, veikimo valandos: 44 590 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 200 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 2 000 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, alyvos bako talpa: 3 100 l, galia: 150 kW (203,94 AG), paskutinio kapitalinio remonto metai: 2025, Technical Data - Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Type: 112 Year of manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours as of December 2025 Main press force: 200 t Specific pressing force: 16.5 kg/cm² Feed chute dimensions: 2,000 x 1,020 mm Filling volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length adjustable Drive power: 2 x 75 kW Binding: 5-fold horizontal, fully automatic Throughput for MSW: approx. 48 to 54 t/hour, depending on material Hydraulic oil tank capacity: 3,100 L Machine weight, press: approx. 50.8 t Scope of delivery: 1 unit baler MACPRESSE, type 111A 1 unit operating manual with CE declaration, electrical and hydraulic schematic Remarks: The machine has been serviced and partially overhauled in our workshop. The following work was performed and parts replaced: Nwjdjx Dnb Uopfx Abbef • Hydraulic oil tank completely drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantling of the press ram, complete disassembly, overhaul of the mechanics • Replacement of the front two main guide rollers • Replacement of the knives on the press ram • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, all seals replaced • Replacement of the counter knife in the frame • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame renewed on left and right sides • Worn press floor cut out, bottom plate replaced with wear-resistant HARDOX steel • Dismantling of the tying and twisting unit, complete disassembly, overhaul of the mechanics, replacement of all twister shafts and ball bearings • Replacement of all wire rollers in the needle heads • Wire cutters cleaned and reset, chains lubricated and tensioned • All wire deflection pulleys made operational • All door contact switches replaced • Vibulator dismantled, disassembled and serviced • General maintenance performed Finally, the baler was subjected to a machine test in both manual and automatic modes—see our video for a functional test of the machine. The documentation (operator manual, CE, electrical/hydraulic schematic) is complete. Viewing by appointment is possible. No liability is assumed for the technical specifications or possible errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 170 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 800 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, bendras svoris: 40 000 kg, alyvos bako talpa: 3 000 l, paskutinio kapitalinio remonto metai: 2024, For sale is a used bale press system comprising an underfloor chain belt conveyor with feed hopper, a hydraulic pre-compactor with an agitator, a MACPRESSE 111A baler, two complete wire feed rack units with five spool holders each (no wire included). Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific compaction force: 14 kg/cm² Feed hopper dimensions: 1,800 x 1,020 mm Fill volume: 2.5 m³ Nominal throughput: 750 m³/h Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Wire tying: 5-fold horizontal, fully automatic Throughput: approx. 30 to 35 t/h, material dependent Hydraulic tank volume: 3,000 L Transport dimensions (with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight: approx. 40 t Notes: The baler has been partially overhauled in our workshop and function-tested upon completion, as shown in our demonstration video. Previously, the line was used for baling paper and cardboard from municipal collection. As the contract was awarded elsewhere at the end of the term, the complete system is now for sale. A detailed photo documentation and our offer outline all performed refurbishment work and the installed new spare parts. Full documentation (operating manual, CE declaration, electrical/hydraulic schematics) is available. Viewing is possible by appointment. No liability will be accepted for technical data or potential errors. Technical Data – Conveyor: Manufacturer: Wagensfeld B.V. Model: Chain belt conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/min Loading belt length: 6,900 mm Incline belt length: 12,885 mm Gooseneck length: 1,747 mm Overall length: 21,271 mm Incline: 32° Usable width: 1,644 mm Drive shaft height above floor: 5,777 mm Side wall height, loading belt: 500 mm Side wall height, incline belt: 880 mm Steel cleat height: 40 mm Cleat spacing: 1,200 mm Njdou Th D Rjpfx Abbswf Transport dimensions (disassembled): 15,005 x 2,500 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Notes: The chain belt conveyor, manufactured in 2017, was custom built and installed for the baler during its last installation in the Netherlands. The conveyor is in good, ready-for-use condition and has not been overhauled. An installation drawing with pit dimensions is available. Scope of supply: - 1 unit chain belt conveyor, Wagensfeld B.V. - 1 unit feed hopper with pre-compactor flaps - 1 unit agitator - 1 unit MACPRESSE baler, type 111A - 2 units wire feed racks with wire spool holders, without wire - 1 unit operating manual with CE declaration, electrical and hydraulic schematics

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 13 209 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 050 mm, pildymo angos ilgis: 1 250 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 700 mm, balo svoris: 500 kg, alyvos bako talpa: 400 l, paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 108 m³/val, Technical data of the baler: Manufacturer (as per nameplate): BRAMIDAN (original manufacturer: Presto GmbH & Co. KG) Model: HC 50 (equivalent to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (as of March) Number of bales pressed: 23,379 pcs Pressing force: 50 t Specific pressing force: 650 kN/m² Feed opening dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/hour Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total current consumption: 50 A Binding: 4-fold vertical, fully automatic Throughput at a bulk density of: - 30 kg/m³: approx. 3.1 t/hour - 60 kg/m³: approx. 4.5 t/hour - 100 kg/m³: approx. 7.2 t/hour Bale weights at a bale length of approx. 1.2 m: up to 500 kg (depending on material) Hydraulic oil tank capacity: 400 L PLC: Siemens S7-200 Effective transport dimensions (excluding press): 6780 x 1800 x 2100 mm (L x W x H) Transport weight (press): 8.5 t Condition of the baler: The baler was in use at a production facility, exclusively for compacting cardboard, and has been regularly serviced. With only 13,209 operating hours, the machine has seen relatively low use. The baler has been partially overhauled and thoroughly tested in our workshop. The following overhaul work was carried out: - Machine cleaned - Bale retainer freed up and lubricated - Light barrier replaced - Twister unit completely disassembled, all bearings and plastic sliders replaced, greased, chain tension adjusted - Knife and counter-knife dismantled, sharpened, and reassembled - Knife gap readjusted - General maintenance performed and greased Scope of delivery for the baler: - 1 baler with wire spool boxes (without wire) - 1 set of machine documentation Nwjdpfx Asw U Dt Nobbsf Comments: Complete documentation available (operating manual, CE declaration, electrical/hydraulic schematic). Viewing by appointment. We accept no liability for technical information or possible errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment Nwedovf E Avspfx Abbof - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, veikimo valandos: 32 169 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 320 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 750 kg, bendras svoris: 22 000 kg, alyvos bako talpa: 900 l, For sale is a complete baling press system consisting of conveyor technology, baler (partially overhauled and tested), and wire stations. Technical Data of the Press: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main press force: 60 t Pre-press force max.: 25 t Feed opening dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale dimensions: 1,100 x 720 mm, length variable Drive power: 45 kW Total connected load: 60 kW Tying system: 5-fold vertical Throughput capacity at bulk density: 30 kg/m³ approx. 5.5 t/h 50 kg/m³ approx. 10 t/h 100 kg/m³ approx. 16 t/h Bale weights: 400 up to 750 kg, depending on material PLC control: Telemecanique TSX Micro Machine weight (press): approx. 22 t Scope of delivery: 1 chain belt conveyor 1 Bollegraaf baler HBC 60A with de-flaker (wirbulator) 1 maintenance platform with access ladder 2 wire stations with redirect pulleys for 10 wire coil holders (without wire) The following repair and overhaul work has been carried out: Hydraulic oil tank completely drained, cleaned, and refilled with new oil Oil and air filters replaced Partial resealing of hydraulic block Hydraulic hose at hydraulic block replaced Wire mark grooves at floor entry points welded and smoothed Tying system cleaned and serviced Electrical system overhauled, door flap contact switches partially replaced De-flaker (wirbulator) repaired Njdpfx Aeviwdmebbowf General maintenance performed, lubricated Machine tested during operation without material, in both manual and automatic modes – see function video Notes: The equipment has already been completely dismantled, stored, and is ready for immediate loading. Documentation (manual, CE, electric/hydraulic wiring diagrams) is available. Inspection possible by appointment. We do not assume liability for technical specifications or possible errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2009, veikimo valandos: 22 029 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 80 t, pildymo angos plotis: 1 000 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 16 000 kg, galia: 45 kW (61,18 AG), paskutinio kapitalinio remonto metai: 2025, Technical Data Press: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours (as of December 2025) Press force: 80 kN Specific pressing force: 103.9 N/cm² Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length is variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughputs at a bulk density of: 30 kg/m³ approx. 6.0 t/hour 50 kg/m³ approx. 10.5 t/hour 100 kg/m³ approx. 17.5 t/hour Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material PLC controller: Siemens S7-300 Display panel: Pulsotronic Installed machine dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight of press: 16 t Special Equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting 'difficult' materials and loose bulk materials of small particle size • Control cabinet air-conditioning • Machine feet height increase by 200 mm Comment: The machine was serviced and partially overhauled in our workshop. The following work was performed and parts replaced: • Disassembly of the press ram, breakdown into individual parts, overhauling the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right below the press ram o Plastic wear rails left/right above the press ram o Main plastic wear plate (support plate) centrally under the press ram • Steel guide rails left/right above in the frame renewed • Replacement of the entire base plate, four-part, made from wear-resistant HARDOX steel • Wire feed rails in the press floor newly welded and smoothed • Replacement of counter knife, two-part, in the frame • Adjustment of the knife gap to approx. 2.5 mm • Disassembly of the tie and twisting unit, breakdown into individual parts, overhauling the mechanics, replacement of all groove ball bearings and axial ball bearings of the twisting shafts, wire cutters cleaned and re-adjusted, chains lubricated and tensioned Nwodpfx Aox A U Ncebbjf • Support roller in front of the twisting shafts replaced • All hydraulic hoses renewed • Oil and air filters renewed • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, was chemically analyzed, is still in good condition and therefore was not replaced; it can continue to be used • General maintenance carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for machine function test.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 48 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 7 500 mm, kamuolio ilgis: 120 mm, ryšulio plotis: 750 mm, ryšulio aukštis: 1 100 mm, balo svoris: 550 kg, bendras svoris: 9 000 kg, Įranga: dokumentacija / vadovas, Automatic baler HSM VK 4812 The unit is in perfect condition. Total operating hours: only 1,950. Number of processed bales: only 1,314. The machine was regularly serviced and has operated indoors in the warehouse since new. It has processed very low-dust materials – mainly textile cuttings. Key advantages of the machine: - Actual throughput: 6–13 t/h - Optimal continuous operation: 6–10 t/h - Very fast cycle → ideal for integration with belt conveyor systems Nedpfx Absy Dpy Uebjwf - Clearly superior to the 15–22 kW versions when handling large material flows Technical specifications: Pressing force: 480 kN (≈ 48 t) Motor power: 30 kW Connected load: approx. 32 kW Power supply: 3 × 400 V / 50 Hz Specific pressure: 58.2 N/cm² Volumetric throughput: up to 332 m³/h Weight-based throughput (practical): approx. 6 t/h (20 kg/m³) approx. 13 t/h (50 kg/m³) Theoretical max. throughput: up to 16.6 t/h at 50 kg/m³ Idle cycle time: approx. 11.2 s Bale dimensions: 1100 × 750 × 600–1200 mm Bale weight: up to approx. 550 kg Press channel: 1100 × 750 mm Feed opening: approx. 1020 × 1250 mm We also have other balers in stock. Transport costs depend on weight, volume, and especially distance. For transport inquiries, the following information is required: delivery address (postcode and city). Detailed arrangements require phone contact, so please inquire about transport costs and delivery options by calling us directly. Our contact details can be found in the seller’s legal information. We sell and export worldwide. Thanks to our large warehouse capacity, we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices – VAT exempt. Opening hours Mon-Fri: 8:00–16:00 Sat: closed

Būklė: geras (naudotas), Bramidan B 20 Baler Bale dimensions - WxDxH (mm): 1200 x 800 x 800 Feed opening WxH (mm): 1200 x 480 Pressing force: 20 tons Motor (kW): 4.0 Cycle time (s): 36 / 21 Baler dimensions WxDxH (mm): 1775 x 1030 x 2790 Weight (kg): 1600 Stroke (mm): 750 Number of bale ties: 4 Year of manufacture: 2012 - 2017 Price: 4500 EUR Bramidan X25 – High-performance Waste Baler Suitable for various materials, including stretchable ones Large, wide chamber Retaining claws to prevent the material from expanding in the chamber Short cycle time allows for quick waste compaction TYPES OF WASTE: Cardboard Plastic film Paper PET bottles Aluminum cans Rigid plastics Textiles EPS polystyrene Steel cans BALE DIMENSIONS: 1200 x 800 x 800 mm PRESSING FORCE: 25 t BALE WEIGHT: Cardboard (kg): 200-300 Plastic film (kg): 250-350 Nsdov Aku Sjpfx Abbewf Year of manufacture: 2012-2018 Price: 5500 EUR ORWAK 3410 For paper, film, cans, PET bottles. Pressing force: 24 tons. Power supply: 3-phase 400 V, 50 Hz Bale dimensions: Width: 1200 mm Depth: 800 mm Height: 1000 mm Bale weight: up to 400 kg Year of manufacture: 2010-2013 Price: 4000 EUR Orwak 3420 Year of manufacture: 2014 Price: 5000 EUR Bramidan 4-OS Baler - price: 5200 EUR Pressing force: 50 tons Baler 4-X25 - price: 4500 EUR

Būklė: naudotas, Automatinė presavimo mašina HSM 4012 Presavimo jėga: 45 tonos Variklio galia: 15 kW Nwsdpev Ak Dgsfx Abbjf Maitinimas: 400 V / 50 Hz Ryšulio matmenys: apytiksl. 900 × 720 × 600–1200 mm Ryšulio skerspjūvis P x A: 900 x 720 mm Rezervuaro talpa: 300 l Ryšulio svoris: iki 400 kg priklausomai nuo medžiagos Rišimas: 3 kartus automatiškai viela Pakrovimo anga 820 × 1250 mm pritaikyta nepertraukiamam pakrovimui, pvz., konvejeriu Mašinos matmenys ir svoris apytiksl. 6180 × 3190 × 2540 mm svoris: apytiksl. 7–8 tonos Spaudžiamos medžiagos kartonas popierius plastikinės plėvelės lengvos pakuočių atliekos Presą aptarnavo HSM įmonė.

Būklė: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Prieinama nuo 2026-05-15 Balių presas Paal Konti 325 G, pagamintas 2013 m. Techniniai duomenys: Gamintojas: Paal Tipas: Konti 325 G Pagaminimo metai: 2013 Darbo valandos: 11 723 (2026-02-10 duomenimis) Presavimo jėga: 100 t Variklio galia: 2 x 55 kW Įkrovimo anga: 1020 x 1750 mm Balių matmenys: 750 x 1100 mm, ilgis kintamas Penkiskart automatinis surišimas Našumas: 35 kg/m³ – apie 13,5 t/h 60 kg/m³ – apie 21,5 t/h 100 kg/m³ – apie 33 t/h Baliaus svoris iki 800 kg Transportavimo matmenys: apie 12216 x 2530 x 2800 mm (I x P x A) Įrenginio svoris: apie 28 000 kg Medžiagos: popierius, kartonas, lengvos atliekos, plastiko atliekos Atkreipkite dėmesį: Visi techniniai duomenys pateikti pagal gamintojo informaciją. Neatsakome už pateiktą informaciją ir galimas klaidas. Pasiūlymas nėra įpareigojantis, galimas pardavimas kitam pirkėjui ar atsiėmimas bet kuriuo metu. Nodpfx Absy A Ibnebjwf Apžiūra galima susitarus iš anksto. Pardavimas su išankstiniu apmokėjimu, iš gamyklos, be garantijos ir atsakomybės.

Būklė: geras (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, Baler Dixi 80 SLD, with lift/tip device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Throughput: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Nodpoy Avlnofx Abbowf Bale weight: approx. 500–600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The baler is in good condition. It has been checked and tested by us. A demonstration video is available on our website or YouTube channel. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for errors or inaccuracies in the details provided. This offer is subject to change, prior sale reserved, and can be withdrawn at any time. Inspections are possible by appointment. Sale ex works, advance payment required. No warranty or guarantee given.

Būklė: geras (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, Baler Dixi 80 SLD, with lift/tip device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Throughput: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The baler is in good condition. It has been checked and tested by us. A demonstration video is available on our website or YouTube channel. Nwsdpsy Avhcefx Abbsf Please note: All technical data is based on information provided by the manufacturer. We accept no liability for errors or inaccuracies in the details provided. This offer is subject to change, prior sale reserved, and can be withdrawn at any time. Inspections are possible by appointment. Sale ex works, advance payment required. No warranty or guarantee given.

Būklė: geras (naudotas), variklis 2,2 kW, spaudimo jėga 20 t, ryšulio svoris 200-250 kg, Mašinos matmenys: Aukštis: 2440 mm, Plotis: 1185 mm, Ilgis: 2480 mm, Pakrovimo anga: 1100 mm x 700 mm, Mašinos svoris: 1565 kg Nwjdpfoyti H Sex Abbef

Būklė: geras (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Baler Presona LP 85 VH2 with cross-tie, year of manufacture 2018 Technical Data: Manufacturer: Presona Sweden Model: LP 85 VH2 Year of manufacture: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours approx. 22,000 Pre-press force: 28 t Main press force: 85 t Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical throughput volume: 1200 m³/h Throughput rate at 30-100 kg/m³: 13-30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank volume: 2,000 L Transport dimensions (press): 10,400 x 2,400 x 2,800 mm (LxWxH) Weight approx. 27,000 kg Nwjdpfxjyz Snps Abbef The press was dismantled from ongoing operation. Technical documentation is available. Please note: All technical data is based on the manufacturer's information. We do not assume liability for the accuracy of the information provided or for possible errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Sale is made on advance payment ex works, without warranty or guarantee.

Būklė: geras (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, Vertical Baling Press HSM VL 600, Year of Manufacture: 2002 Technical Specifications: Manufacturer: HSM Model: HSM VL 600 Year of Manufacture: 2002 Pressing Force: 60 t Drive Power: 7.5 kW Cycle Time (Idle): 37 s Filling Height: 1130 mm Filling Opening: 1150 x 735 mm Bale Size: 1200 x 1100 x max. 1200 mm Bale Weight: 550 kg Machine Weight: 3575 kg Materials: Suitable for paper, cardboard, film, and car tyres The press is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Nwedpfx Ajyz Sa Sebbjf Viewing/inspection, including under power, is possible at any time by appointment. On request, we can also carry out tests with your material for a handling fee. Please note: All technical data is based on manufacturer information. We do not accept any liability for the information provided or for possible errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, prepayment required, without warranty or guarantee.