Presai rulonams pirkti naudotą (199)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, spaudimo jėga: 20 t, Technically well-functioning, fully equipped Bramidan B20 baler Ledoxwqn Djpfx Af Iorg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, Fully functional Bramidan B50 baler, serviced, complete set - hook, strap rools. Lrsdpfxoxg Tk Tj Af Iog

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 97 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 10 t, Fully serviced, fully equipped and ready to use. New oil. 5pcs in stock Ledjw Ey Dtjpfx Af Iorg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Tested, cleanded, full service was made. New oil. We have two Orwak 5030 balers. Last photo - green, refurbished 2017 - 2000 Eur. Lrjderxfn Uspfx Af Ieg

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 30 t, Used Bramidan B30 baler. Newly repainted. Ready for use, fully equipped, in perfect working condition. New oil. Lsdpfxeviymwj Af Isrg

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2009, veikimo valandos: 22 029 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 80 t, pildymo angos plotis: 1 000 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 16 000 kg, galia: 45 kW (61,18 AG), paskutinio kapitalinio remonto metai: 2025, Technical Data Press: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours (as of December 2025) Press force: 80 kN Specific pressing force: 103.9 N/cm² Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length is variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughputs at a bulk density of: 30 kg/m³ approx. 6.0 t/hour 50 kg/m³ approx. 10.5 t/hour 100 kg/m³ approx. 17.5 t/hour Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material PLC controller: Siemens S7-300 Display panel: Pulsotronic Installed machine dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight of press: 16 t Special Equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting 'difficult' materials and loose bulk materials of small particle size • Control cabinet air-conditioning • Machine feet height increase by 200 mm Ljdpfsx A U Ncsx Af Iorg Comment: The machine was serviced and partially overhauled in our workshop. The following work was performed and parts replaced: • Disassembly of the press ram, breakdown into individual parts, overhauling the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right below the press ram o Plastic wear rails left/right above the press ram o Main plastic wear plate (support plate) centrally under the press ram • Steel guide rails left/right above in the frame renewed • Replacement of the entire base plate, four-part, made from wear-resistant HARDOX steel • Wire feed rails in the press floor newly welded and smoothed • Replacement of counter knife, two-part, in the frame • Adjustment of the knife gap to approx. 2.5 mm • Disassembly of the tie and twisting unit, breakdown into individual parts, overhauling the mechanics, replacement of all groove ball bearings and axial ball bearings of the twisting shafts, wire cutters cleaned and re-adjusted, chains lubricated and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses renewed • Oil and air filters renewed • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, was chemically analyzed, is still in good condition and therefore was not replaced; it can continue to be used • General maintenance carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for machine function test.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2014, veikimo valandos: 5 612 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 48 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 250 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 550 kg, bendras aukštis: 2 800 mm, bendras svoris: 12 000 kg, transporto aukštis: 2 800 mm, alyvos bako talpa: 300 l, galia: 30 kW (40,79 AG), tūrio srautas: 332 m³/val, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG Model: VK 4812 Year of Manufacture: 2014 Operating Hours: 5,612 hours as of August 2025 Main Press Force: 48 t Specific Press Force: 58.2 N/cm² Feed Opening Dimensions: 1,250 x 1,020 mm Theoretical Cycle Time: 11.2 sec Theoretical Throughput: 332 m³/hour Bale Dimensions: 1,100 x 750 x 600 up to 1,200 mm Drive Power: 30 kW Total Connected Load: 32 kW Rated Current: 59 A Binding System: 4-fold horizontal, fully automatic Throughput rates by bulk density: - At 20 kg/m³: up to 6 t/hour, depending on material - At 50 kg/m³: up to 13 t/hour, depending on material Bale Weights: up to 550 kg, depending on material PLC Control: Siemens SIMATIC S7-200 Operator Panel: Siemens HMI Touch Panel Hydraulic Oil Tank Capacity: 300 L Oil Grade: HVI 46 Machine Installation Dimensions with Bale Slide: 10,046 x 4,387 x 2,705 mm (L x W x H) Transport Dimensions (Press): 8,500 x 2,500 x 2,750 mm (L x W x H) Machine Weight (Press): approx. 12 t Ledevtpq Hspfx Af Iorg Scope of Delivery: - HSM VK 4812 baler, without hydraulic oil, without conveyor equipment - Two wire spool boxes for 8 pieces of 40 kg wire spools, without wire - Bale slide - Machine documentation in German Remarks: The baler is equipped with an oil cooler and potential-free contacts for external control. Operation at the control cabinet is on the left in the pressing direction; the needle unit is on the right and can be folded back for transport. The baler has been partially overhauled and tested in our workshop, see photos and our function video. Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Inspection by appointment. No liability is assumed for technical details or potential errors.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, veikimo valandos: 13 284 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 140 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 500 kg, alyvos bako talpa: 2 600 l, Technical Specifications – Baler: Manufacturer: Bollegraaf Model: HBC 140 Year of manufacture: 2017 Operating hours: 13,284 (as of October 2025) Main press force: 140 t (max. 153.5 t) Pre-press force: 70 t Feed hopper dimensions: 1,600 x 1,100 mm (L x W) Filling volume per cycle: 4.34 m³ Theoretical cycle time: 16 seconds Bale dimensions: 1,100 x 1,100 mm (W x H), length variable Drive power: 2 x 75 kW Total connected load: 209 kW Binding: 5-fold vertical, fully automatic Throughputs at bulk densities of: 30 kg/m³: approx. 30 t/h 50 kg/m³: approx. 46 t/h 100 kg/m³: approx. 82 t/h Bale weights: 850 to 1,500 kg Hydraulic oil: 2,600 l Univis N46 Installed dimensions (with hopper and conveyor): 13,200 x 24,200 x 7,333 mm (L x W x H) Transport dimensions (press only): 13,302 x 2,884 x 3,539 mm (L x W x H) Machine weight (press): approx. 51.81 t Technical Specifications – Feed and Incline Conveyor with Swan Neck: Manufacturer: Bollegraaf Model: HBT 1216/1800 * 23,300 30°/15° Year of manufacture: 2017 Lrodoxpxhvspfx Af Isg Drive power: 7.5 kW Feed belt length: 6,750 mm Incline belt length: 14,400 mm Swan neck length: 2,150 mm Incline: 30° Effective width: 1,754 mm Side wall height (feed belt): 500 mm Side wall height (incline belt): 800 mm Transport dimensions (feed belt with one incline segment): 9,816 x 2,500 x 2,242 mm (L x W x H) Transport dimensions (incline belt with swan neck): 13,472 x 2,800 x 2,729 mm (L x W x H) Pit dimensions: 10,000 x 3,200 x 1,200 mm (L x W x D) Condition: The baler is in very good, immediately operational condition – see the functional video. The conveyor belt chain should be replaced. The system is in operation until December 2025. Scope of delivery: Baler with conveyor, maintenance platform, access ladder, two wire feeding stations (for five wire coils each, wire not included), and bale slide. Remarks: Complete documentation available (operating manual, CE declaration, electrical/hydraulic schematic). Inspection possible by arrangement. No liability is assumed for technical details or potential errors.

Sąlyga: geras (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 70 t, pildymo angos plotis: 1 060 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 500 kg, įėjimo įtampa: 400 V, bendras svoris: 23 000 kg, triukšmo lygis: 85 dB, galia: 37 kW (50,31 AG), Parduodama naudota BOA 2060. Šiuo metu įrenginys yra saugomas Belgijoje. Mašina visada buvo eksploatuojama, dabar atjungta. Pardavimo būklė – tokia, kokia yra, tačiau pagal pageidavimą galima pasiūlyti įrenginio kapitalinį remontą. Techniniai duomenys: Variklio galia: 37 kW Presavimo jėga: 70 t Balo matmenys: 1100 x 720 mm Vielų kiekis: 4 vertikalios, 2 horizontalios Užpildymo angos matmenys: 1500 x 1060 mm Ljdpfxoya Uwpe Af Ierg Balo svoris: apie 500 kg (priklausomai nuo medžiagos) Našumas: iki 14 t/val. (priklausomai nuo medžiagos) Presavimo įrenginio svoris: 23 000 kg.

Sąlyga: labai geros būklės (naudotas), Modelis: HSM V-press 1160 plus presavimo presas Presavimo jėga (kN): 59 Našumas (balių/val.): 1-2 Didžiausias baliaus dydis (mm): 1200x1100x1000-1200 Išmatavimai (ilgis x plotis x aukštis, mm): 1780x1150x2985 Galia (kW): 4 kW Ljdpfx Ajv Al Tiof Isrg Svoris (kg): 2300 Pagaminimo metai: 2018–2019

Sąlyga: paruoštas naudoti (naudotas), HSM V-Press 860 balers HSM V-Press 860, year 2008-2009, price: 5,800 EUR Press force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Feed opening (W x H): 1195 x 650 mm Bale size (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Consumables: wire Material types: film, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013-2015, price: 7,500 EUR HSM V-Press 860 L, year 2015, price: 9,000 EUR HSM V-Press 860 plus, year 2019, price: 9,000 EUR HSM V-Press 860, new, display unit, year 2020, price: 13,000 EUR Lsdpfjra Rbgex Af Ierg 4-fold bale tying with wire Bale size (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (kg): approx. 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Feed opening (mm): 1200 x 565 Cycle time (s): 35 Press force (t): 54 Power supply (V): 400 (three phase) HSM V-Press 860 plus B, year 2020, price: 14,000 EUR Pressing force: 594 kN Voltage/frequency: 400 V/50 Hz Motor power: 4 kW Feed opening (W x H): 1500 x 651 mm Bale size (L x W x H): 1500 x 780 x 1200 mm Bale weight: 550 kg Filling type: Manual Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Consumables: wire Pressable materials: film, cardboard Idling cycle time: 25 s

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 59 t, pildymo angos plotis: 1 190 mm, pildymo angos ilgis: 400 mm, kamuolio ilgis: 1 180 mm, ryšulio plotis: 700 mm, ryšulio aukštis: 800 mm, balo svoris: 350 kg, bendras plotis: 1 059 mm, bendras aukštis: 2 871 mm, bendras ilgis: 1 838 mm, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, įėjimo srovė: 16 A, bendras svoris: 2 300 kg, garantijos trukmė: 6 mėnesiai, transporto aukštis: 2 050 mm, galia: 4 kW (5,44 AG), paskutinio kapitalinio remonto metai: 2025, transporto plotis: 1 059 mm, transporto ilgis: 1 838 mm, apsaugos tipas (IP kodas): IP54, įėjimo dažnis: 50 Hz, eigos ilgis: 890 mm, Įranga: dokumentacija / vadovas, Gamintojas: Strautmann Umwelttechnik GmbH Nurodyta kaina yra be PVM, iš gamyklos, be pakuotės. Presas yra išvalytas, patikrintas, suremontuotas ir aprūpintas nauja valdymo sistema pagal EN16500 standartą. Visos naudotos atsarginės dalys yra originalios Strautmann gamybos dalys. Techniniai duomenys: Gamintojas: Strautmann Umwelttechnik Tipas: PP 1207 Briketų dydis (I x P x A): 1180 x 700 x 800 mm Išoriniai matmenys (I x P x A): 1838 x 1059 x 2871 mm Transportavimo aukštis: 2050 mm Užpildymo anga: 1190 x 400 mm Spaudimo jėga: 59 t / 580 kN Našumas: 1–2 briketai/val. Juostos kanalų skaičius: 4 Ledowq Ifvopfx Af Ijrg Preso svoris: 2300 kg Elektros tiekimas: 400 V / 50 Hz Galingumas: 4 kW Statymo vieta: viduje / lauke po stogu Komplekte startinis briketavimo juostos rinkinys, 19 mm Pagaminimo metai: 2002

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Lodpfjyap I Ajx Af Iorg Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Inspected for correct operation. FLITS Rental & Sales service: with every machine we supply one bundle of bale wire (120 wires). Do you need additional bundles? Please request a non-binding quote. At FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are very welcome to view the machines on site. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, so that we have ample time to provide you with thorough information and show you the right machines. We are happy to assist! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile press Waste processing

Sąlyga: naudotas, Gamybos metai: 2007, galia: 7 kW (9,52 AG), PARDUODAMAS / NUOMOJAMAS: VERTIKALI PRESA! (Nuoma galima Lietuvoje, Latvijoje, Estijoje ir Lenkijoje) Techninė informacija: Gamintojas: HSM Modelis: HSM 500 VL Presavimo jėga: 54–540 kN Ryšulio dydis: 1200 x 800 x 1200 mm Ryšulio svoris: apie 500 kg Maksimalus ryšulio dydis: apie 1200 x 800 x 1200 mm (Plotis x Gylis x Aukštis) Presavimo kameros matmenys: 1200 x 800 x 1520 mm (Plotis x Gylis x Aukštis) Variklis: 7,5 kW Pagaminimo metai: 2005 Lodjxuqkmspfx Af Isrg KAINA PAGAL UŽKLAUSĄ!

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 13 209 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 050 mm, pildymo angos ilgis: 1 250 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 700 mm, balo svoris: 500 kg, alyvos bako talpa: 400 l, paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 108 m³/val, Technical data of the baler: Manufacturer (as per nameplate): BRAMIDAN (original manufacturer: Presto GmbH & Co. KG) Model: HC 50 (equivalent to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (as of March) Number of bales pressed: 23,379 pcs Pressing force: 50 t Specific pressing force: 650 kN/m² Feed opening dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/hour Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total current consumption: 50 A Binding: 4-fold vertical, fully automatic Throughput at a bulk density of: - 30 kg/m³: approx. 3.1 t/hour - 60 kg/m³: approx. 4.5 t/hour - 100 kg/m³: approx. 7.2 t/hour Bale weights at a bale length of approx. 1.2 m: up to 500 kg (depending on material) Hydraulic oil tank capacity: 400 L PLC: Siemens S7-200 Effective transport dimensions (excluding press): 6780 x 1800 x 2100 mm (L x W x H) Transport weight (press): 8.5 t Condition of the baler: Lodpfx Afow U Dt Ns Ijrg The baler was in use at a production facility, exclusively for compacting cardboard, and has been regularly serviced. With only 13,209 operating hours, the machine has seen relatively low use. The baler has been partially overhauled and thoroughly tested in our workshop. The following overhaul work was carried out: - Machine cleaned - Bale retainer freed up and lubricated - Light barrier replaced - Twister unit completely disassembled, all bearings and plastic sliders replaced, greased, chain tension adjusted - Knife and counter-knife dismantled, sharpened, and reassembled - Knife gap readjusted - General maintenance performed and greased Scope of delivery for the baler: - 1 baler with wire spool boxes (without wire) - 1 set of machine documentation Comments: Complete documentation available (operating manual, CE declaration, electrical/hydraulic schematic). Viewing by appointment. We accept no liability for technical information or possible errors.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, veikimo valandos: 32 169 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 320 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 750 kg, bendras svoris: 22 000 kg, alyvos bako talpa: 900 l, For sale is a complete baling press system consisting of conveyor technology, baler (partially overhauled and tested), and wire stations. Technical Data of the Press: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main press force: 60 t Pre-press force max.: 25 t Feed opening dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale dimensions: 1,100 x 720 mm, length variable Drive power: 45 kW Total connected load: 60 kW Tying system: 5-fold vertical Throughput capacity at bulk density: 30 kg/m³ approx. 5.5 t/h 50 kg/m³ approx. 10 t/h 100 kg/m³ approx. 16 t/h Bale weights: 400 up to 750 kg, depending on material PLC control: Telemecanique TSX Micro Machine weight (press): approx. 22 t Scope of delivery: 1 chain belt conveyor 1 Bollegraaf baler HBC 60A with de-flaker (wirbulator) 1 maintenance platform with access ladder 2 wire stations with redirect pulleys for 10 wire coil holders (without wire) The following repair and overhaul work has been carried out: Hydraulic oil tank completely drained, cleaned, and refilled with new oil Oil and air filters replaced Partial resealing of hydraulic block Hydraulic hose at hydraulic block replaced Wire mark grooves at floor entry points welded and smoothed Tying system cleaned and serviced Electrical system overhauled, door flap contact switches partially replaced Lrodpfx Ajviwdmof Ieg De-flaker (wirbulator) repaired General maintenance performed, lubricated Machine tested during operation without material, in both manual and automatic modes – see function video Notes: The equipment has already been completely dismantled, stored, and is ready for immediate loading. Documentation (manual, CE, electric/hydraulic wiring diagrams) is available. Inspection possible by appointment. We do not assume liability for technical specifications or possible errors.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2012, Brand: DIXI Model: 60 Sh Lredox Ux Hxspfx Af Ieg Year of manufacture: 2012 Pressing force: 60 t Voltage: 400 V Maximum bale weight: 340–500 kg Bale dimensions: approx. 120 x 80 x 80–110 cm Machine weight: 2,400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Filling opening size: 115 cm x 80 cm deep x 55 cm high Condition: very good! Functionality checked. FLITS Rental & Sales service: With every machine, we supply a bundle of tying wire (120 wires). Need additional wire bundles? Request a no-obligation quotation. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for businesses and private customers alike. We focus on supplying efficient solutions for materials handling, cleaning, waste processing, and working at height. At FLITS Rental & Sales, you will find a comprehensive range of machines suitable for various sectors. See our listings for: waste balers for efficient waste processing, electric pallet trucks/stackers for fast and safe internal transport, scrubber dryers for deep and professional floor cleaning, and forklifts in various models suitable for different working environments. When you choose FLITS Rental & Sales, you opt for speed, clarity, and reliability. We think along with you, respond immediately, and ensure you receive the right machine quickly. Visit our location: You are very welcome to view the machines on site. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment so we can dedicate ample time to provide information and show you the right machines. Contact: Do you have questions or would you like to receive a non-binding quotation? Please feel free to contact us: We are happy to assist you. Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing DIXI

Sąlyga: naudotas, Gamybos metai: 2012, spaudimo jėga: 40 t, Gamintojas: HSM Modelis: HL 4010 Li Pagaminimo metai: 2012 Ledex H R U Sopfx Af Iorg Spaudimo jėga: 40 t

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: Very good! Functionality inspected. Lodpfx Afjx Tznvj Iorg FLITS Rental & Sales service: with every machine we supply a bundle of tying wire (120 wires). Need additional bundles of tying wire? Request a non-binding quote. At FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly have the right machine at your disposal. You are very welcome to view the machines on-site. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, so we can take the time to inform you thoroughly and show you the correct machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, The ZENTEX PPH 5 baler press is a device designed for compacting and pressing cardboard and foil. The baler reduces the volume of waste, making it ideal for use in warehouses, wholesale stores, and logistics companies. The cardboard press is equipped with tilt doors, and the maximum bale size is 70x50x45 cm. Pressing cycle time, including the return stroke, is 23 seconds. Advantages of the Zentex PPH 5 cardboard press: • Reduced waste volume for recycling • Time savings in waste management operations • Equipped with a module for pressing both paper and foil • Prevents stored cardboard and foil from occupying valuable aisle and walkway space Offer details for the Zentex PPH5 baler for paper and foil: • Manufacturer: ZENTEX • Condition: used • Year of manufacture: 2010, 2012, 2013 • Model: PPH5 • Width: 84 cm Lrsdondcxgspfx Af Isg • Depth: 72 cm • Height: 207 cm • Weight: 360 kg • Power: 1500 W • Voltage: 400 V Net price: €1,890 per unit, year 2010 (Item code: MTP000234) €1,990 per unit, year 2012 (Item code: MTP000235) €2,090 per unit, year 2013 (Item code: MTP000236) The Zentex PPH 5 cardboard compactor is a professional machine that efficiently reduces waste volumes. It enables baling of waste into finished bales, which are double-strapped for secure handling. This baler is an ideal solution for businesses with small to medium waste output, including small distributors, grocery shops, and clothing stores. * Large quantities available. Price negotiable for larger orders. * Delivery possible across Europe. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Sąlyga: geras (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, Vertical baler HSM VL 600, year of manufacture 2002 Technical specifications: Manufacturer: HSM Model: HSM VL 600 Year: 2002 Pressing force: 60 t Drive power: 7.5 kW Cycle time (idle): 37 s Filling height: 1130 mm Filling opening: 1150 x 735 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Weight: 3575 kg Materials: Paper, cardboard, film The press is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Viewing, including under power, is possible at any time by appointment. On request, we can also carry out tests with your material for an expense allowance. If you have any questions about the machine, we will be happy to answer them by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on the manufacturer's information. We accept no liability for the information provided or for any possible errors. The offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspection is possible by appointment. Lredpfxex Iryro Af Ijg The sale is ex works, prepaid, without warranty or guarantee.

Sąlyga: naudotas, Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, Bale Press Paal Pacomat II with Hopper, Year of Manufacture 1979 Technical Specifications: Manufacturer: Paal Model: Pacomat II Year of Manufacture: 1979 Drive Power: 11 kW Pressing Force: 27 t Channel Cross-Section: 700 x 1000 mm Filling Opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale Size: 700 x 1000 mm Bale Weight: up to 400 kg Machine Dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine Weight: approx. 5,200 kg Materials: Paper, Cardboard, Film Remarks: The machine is in working condition. It has been inspected and tested at our facility in 28816 Stuhr. The video can be found on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. Upon request, we can also perform tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on the manufacturer's specifications. We do not accept liability for the information provided or for any possible errors. Lrjdsx Irvaopfx Af Ijg Offers are non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment term is 100% advance payment.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF450 is the ideal baler for compacting your loose cardboard and film waste into a bale weighing up to 450 kg. This baler impresses with its simple and safe operation as well as its large feed opening, making it perfect for handling high volumes of material. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly cut your disposal costs, and return the material properly into the recycling stream. Pressing force: 30 tons Bale weight: up to 450 kg (material-dependent) Bale dimensions: 1000 H (variable) x 1200 W x 800 D mm Machine dimensions: 3000 H x 1781 W x 1196 D mm Machine weight: 1300 kg Transport height: 2300 mm Feed opening: 1200 W x 680 H mm Press cycle time: 40 seconds Motor: 5.5 kW, 16 Amp Lrsdovamafopfx Af Ijg Power supply: 380 – 400 V (3-phase) Noise emission: 68 dB Double-cylinder system for even material compaction User-friendly lever operation Bale ejector for easy removal of bales Retaining claws for minimizing material spring-back Bracket for securing strapping A quality product ‘Made in Europe’ Suitable for compacting: - Cardboard - Film - Big bags - Clothing - Light recyclables Additional options: - Annual maintenance and safety inspection (UVV test) - Machine color available in RAL - PLC control with automatic press cycle, bale-ready indicator, and E-stop with key switch - Vertical door - Strapping bands - 11 kW / 32 Amp motor option Keywords: baler, cardboard baler, waste baler, paper baler, cardboard press, film baler, waste compactor, refuse press, recycling press, residual waste press

Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Baler BTS-MF75 in stock and available for immediate delivery The BTS-MF75 is the ideal baler for compacting your loose cardboard and film waste into bales weighing up to 75 kg. With an additional pressing insert, it is also suitable for compressing individual metal and plastic containers as well as cans. The baler impresses with its simple and safe operation and large loading volume. By compacting these waste and recyclables, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and ensure proper return of the material to the recycling loop. Pressing force: 3.5 tons Bale weight: up to 75 kg (depending on material) Bale size: 1000 H (variable) x 700 W x 500 D mm Machine dimensions: 2335 H x 1040 W x 750 D mm Machine weight: 278 kg Transport height: 2335 / 1800 mm (if required) Loading opening: 700 W x 698 H mm Pressing cycle: 24 seconds Motor: 1.5 kW, 13 Amp Power supply: 230 V (single phase) Noise emission: 68 dB User-friendly lever operation Bale trolley for easy removal of bales Retainer to reduce material spring-back Strapping holder A quality product 'Made in Europe' Suitable for compacting: Cardboard Film Cans and lightweight metal containers Canisters and lightweight plastic containers Textiles Lightweight recyclables Ledpfx Afsvah S As Ijrg Additional options: Annual maintenance with safety inspection (UVV) Machine colour selectable according to RAL Can pressing insert PLC control with automatic press cycle, bale-ready signal, and key-operated E-stop Belt bale ejector + PLC (instead of bale trolley) Strapping bands Power supply 380 – 400 V (three phase) Baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, waste press, recycler press, waste compactor, refuse press, residual waste press

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF60HD special baler is ideal for compacting your challenging and tough materials such as cans, PET, metal buckets, and other tin containers; it also efficiently reduces plastics to a minimum. This special baler impresses with its easy operation and large feed opening. Finished bales can be conveniently removed using the automatic bale ejector. Ljdpfx Afsvbq Rks Ierg By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and ensure the material is properly returned to the recycling loop. Pressing force: 13 tons Bale weight: 25 - 60 kg (depending on material) Bale size: 650 H (var.) x 600 W x 400 D mm Machine dimensions: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Filling opening: 600 W x 400 H mm Press cycle: 25 seconds Motor: 2.2 kW, 16 Amp Power supply: 230 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale ejector for convenient bale removal Material retainer to minimize material spring-back Cross strapping for secure bale stability Strap holder for strapping bands A quality product "Made in Europe" Suitable for compacting: PET bottles Cans and tin containers Canisters and plastic containers Cardboard and film Additional options: Annual maintenance with safety inspection (UVV) Machine colour available according to RAL chart Strapping bands Power supply 380 - 400 V (3-phase) PET press, PET baler, can press, can baler, special baler