Presai rulonams pirkti naudotą (182)

Būklė: geras (naudotas), Strautmann AutoLoadBaler presas Tinka presuoti: Hnjdjv Aktnopfx Abvol - Kartoną - Plėvelę - PET butelius - Putas - Skardines - Elektronikos atliekas Įrenginio matmenys (ilgis / plotis / aukštis): 2047 / 2179 / 2950 mm Angos dydis: apie 1192 mm / 575 mm Ritinio matmenys (ilgis / plotis / aukštis): 1200 / 800 / 1100 mm Ritinio svoris: apie 480 kg Spaudimo jėga: 530 kN Pagaminimo metai: 2017-2018

Būklė: geras (naudotas), Prekės ženklas: BRAMIDAN Modelis: B3 Plotis (cm): 94 Gylis (cm): 72 Aukštis (cm): 198 Svoris (kg): 310 Galia (kW): 1,1 Įtampa (V): 230 Kameros plotis (cm): 70 Kameros gylis (cm): 50 Kameros aukštis (cm): 110 Pagaminimo metai: 2010-2015 Presavimo jėga (t): 3 Triukšmo lygis (dB): 69 Kaina: 2.000 EUR Hodpfxev Akr Rj Abvonl B5 - Idealiai tinka didelėms dėžėms: Didelis našumas – didelis produktyvumas Ryšulys išmetamas automatiškai Diržo ritinėliai sumontuoti priekyje, kad būtų lengva pakeisti diržą Kartono ryšulio svoris (kg): 80-110 Plastiko plėvelės ryšulio svoris (kg): 90-130 Ryšulio matmenys PlxGxA (mm): 1000 x 700 x 800 Presavimo jėga (t): 5 Maitinimas: 1x230V 50Hz 10A Variklis (kW): 1,1 Triukšmo lygis (dB): 65-68 Vidutinis ciklo laikas (sek): 33 Išmatavimai PlxGxA (mm): 1360 x 895 x 2370 Svoris (kg): 600 Pakrovimo angos plotis x aukštis (mm): 1000 x 500 Pagaminimo metai: 2014-16 Kaina: 3.800 EUR

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Modelis HSM HL 3521 S su labai dideliu pakrovimo angos yra optimalus įrenginys didelių kiekių popieriaus, kartono, plėvelės ir kitų ypač didelių bei nepatogių pakuočių medžiagų suslėgimui. HSM HL 3521 S modelis taip pat yra specialistas labai atšokančių medžiagų, pvz., putų, presavime. Presas pirktas naujas iš gamyklos. Reguliariai aptarnautas. Naujos mašinos kaina: apie 90 000€ Pagaminimo metai: 2023 Suslėgimo jėga: 320 kN Hjdpey H Dazjfx Abvenl Maksimali ryšulio masė: 600 kg Įrenginio matmenys (plotis x gylis x aukštis): 7900 x 1660 x 2485 mm Pakrovimo angos matmenys (plotis x aukštis): 800 x 2100 mm Turime keletą HL 3521S modelio vienetų iš metų: 2011 / 2015 / 2017 / 2023.

Būklė: geras (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 4 t, pildymo angos plotis: 730 mm, pildymo angos ilgis: 400 mm, kamuolio ilgis: 700 mm, ryšulio plotis: 350 mm, ryšulio aukštis: 500 mm, balo svoris: 40 kg, bendras plotis: 988 mm, bendras aukštis: 2 033 mm, bendras ilgis: 752 mm, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 230 V, bendras svoris: 380 kg, triukšmo lygis: 60 dB, galia: 1,5 kW (2,04 AG), įėjimo dažnis: 50 Hz, Pilnai veikianti ir patikrinta vertikali presavimo mašina, skirta mažiems kartono arba plastiko kiekiams presuoti. Daugiau informacijos ar nuotraukų galite gauti el. paštu arba telefonu. Hjdpfx Ajvy Drxebvenl

Būklė: naudotas, Gamybos metai: 2005, bendras plotis: 1 300 mm, bendras aukštis: 3 850 mm, bendras ilgis: 2 200 mm, Spalva: Pilka Svoris be krovinio: 1 250 kg Kaina: Pagal užklausą - Pagaminimo metai: 2005 - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Serijos numeris: 307 - Transportavimo matmenys: 2200 mm x 1300 mm x 3850 mm (i x p x a) - Transportavimo svoris [kg]: 1250 kg - Transporto paketų skaičius [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina yra be PVM Hnjdpoym Uxtofx Abvjl PVM/diferencijuotas apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir priėmimas daline apmokėjimo tvarka galimi bet kokiai pramonės technikai Yorick Diebels

Būklė: naudotas, Gamybos metai: 2005, bendras plotis: 1 300 mm, bendras aukštis: 3 850 mm, bendras ilgis: 2 200 mm, Spalva: Pilka Nuosavas svoris: 1 250 kg Kaina: Pagal užklausimą - Pagaminimo metai: 2005 - Dokumentacija prieinama: Ne - CE žymėjimas yra: Taip - CE sertifikatas: Ne - Serijos numeris: 308 - Transportavimo matmenys: 2200 mm x 1300 mm x 3850 mm (i x p x a) - Transportavimo svoris [kg]: 1 250 kg - Transportavimo pakuotės [vnt.]: 1 Hjdpfsyrtcuex Abvsnl Finansinė informacija PVM: Nurodyta kaina be PVM PVM/PVM atskaita: PVM atskaitomas įmonėms Pristatymas ir supirkimas galimi bet kuriuo metu visoms pramonės sritims Yorick Diebels

Būklė: dilaminuotas dirbtuvėje (naudotas), kamuolio ilgis: 1 200 mm, ryšulio plotis: 700 mm, ryšulio aukštis: 800 mm, balo svoris: 380 kg, Presas idealios būklės, po kapitalinio remonto nenaudotas. Aptarnavimas tik pas gamintoją. Ideali būklė. Visiškai automatinis darbas. Reguliuojamas ryšulio ilgis 600–1200 mm. Variklis 15 kW. 2007 metai. Ryšulio svoris apie 380 kg. Hnsdpsx S Sbdsfx Abvjl

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, pildymo angos plotis: 920 mm, pildymo angos ilgis: 1 600 mm, Sveiki, parduodu pilnai veikiantį kanalinį presą Paal Comdec. Mašina prižiūrėta, labai geros techninės būklės. Komplekto sudėtyje yra juostinis transporteris. 2025 m. buvo pakeista transporterio juosta. Hedpfsyk Uzpsx Abvenl

Būklė: geras (naudotas), Gamybos metai: 1981, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Automatinė kanalinė presas BOA Continu 25 LB + transporterio juosta. Presas geros būklės, reguliariai prižiūrimas. Neseniai visiškai suremontuota Denison siurblys. Veikia nuolat. Susisiekite su mumis dėl papildomos informacijos. Hjdpfx Abew S Tv Ujvonl

Būklė: paruoštas naudoti (naudotas), Bramidan 4-0F Variklis: 4 kW Presavimo matmenys: 250 x 100 x 255 cm Balo matmenys: 1100 x 700 x 950 mm Balo svoris: 200–250 kg Spaudimo jėga: 18 t Svoris: 1580 kg Hnedpov Ai Uqefx Abvol Įrenginys naudojamas tokių atliekų kaip plėvelė, makulatūra ir kt. tūrio sumažinimui. Kaina: 4500 eur Aventek MK 2500 presas Tai pramoninis presas, skirtas spausti atliekas, tokias kaip: - plėvelė - kartonas / makulatūra - plastikas Spaudimo jėga: 25 t Balo svoris: iki 400 kg, priklausomai nuo medžiagos Balo matmenys: apie 1200 × 800 × 800 mm Ciklo laikas: apie 50 s Maitinimas: 400 V Variklio galingumas: apie 5,5 kW Metai: 2013 Kaina: 6500 eur ORWAK 9020 presas: - variklis 2,2 kW - 380 V - spaudimo jėga 20 tonų - balo matmenys 1100x700x800 mm - balo svoris: priklauso nuo žaliavos, 200–300 kg Kaina: 5500 eur

Būklė: geras (naudotas), Gamybos metai: 2010, veikimo valandos: 3 641 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 36 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 080 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, galia: 15 kW (20,39 AG), tūrio srautas: 90 m³/val, Technical Data of Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Operating Hours: 3,641 hours Pressing Force (Main Press): 36 t Specific Pressing Force: 467 N/cm² Feed Opening Dimensions: 1,080 x 1,100 mm (L x W) Hnjdpou Thh Eofx Abvjl Cycle Time: 34 seconds Filling Volume per Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput Under Operating Conditions (with material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Tying: 4-fold vertical, semi-automatic, with polyester plastic twine Throughput with Bulk Density of: – 35 kg/m³: 1.8 t/hour – 60 kg/m³: 2.5 t/hour – 100 kg/m³: 3.1 t/hour Transport Dimensions (press only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (press): approx. 4 t Remarks: The baler has been function-tested in our workshop, then placed in storage, and is therefore available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. An inspection is possible by appointment. We do not assume liability for any technical specifications or potential errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, veikimo valandos: 28 748 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 570 kg, bendras svoris: 20 000 kg, alyvos bako talpa: 600 l, galia: 37 kW (50,31 AG), tūrio srautas: 350 m³/val, Technical Data of the Baler: Manufacturer: Presona AB, Sweden Model: LP 60 VH1 Year of Manufacture: 2015 Total Operating Hours: 30,143 hours (as of July 2025) Actual Pump Runtime: 6,527 hours (as of July 2025) Number of Bales Pressed: 115,193 bales (as of July 2025) Pre-Press Force: 25 t Main Press Force: 60 t Hodpfxevn Tg Ij Abvsnl Specific Press Force: 73 N/cm² Feed Opening Dimensions: 1,500 x 1,100 mm Filling Volume per Press Cycle: 2.7 m³ Theoretical Throughput: 800 m³/hour Throughput Under Operating Conditions: 350 m³/hour Bale Dimensions: 1,100 x 750 mm Drive Power: 37 kW Tying System: 5-fold vertical, fully automatic Throughput at a Bulk Density of 50 kg/m³: 11 to 14 t/hour Bale Weights: 420 to 570 kg, depending on material Hydraulic Oil Tank Volume: 600 L Baler Dimensions Assembled with Hopper: 10,100 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (excluding press): 10,100 x 2,400 x 3,000 mm (L x W x H) Machine Weight (Press): approx. 20 t Condition of the Baler: The baler has been partially overhauled in our workshop and subsequently tested in manual and automatic operation. The following overhaul work was carried out: - Machine cleaned, partially de-rusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four press ram rollers disassembled and renewed - Grease cartridges of the automatic roller lubrication system replaced - Guide rails on the baler floor in the pressing chamber cut out - Floor reinforced with welded plates - New HARDOX guide rails welded in - Wire station and deflection pulleys for lower wire cleaned and serviced - Guide rails from the floor of the press channel cut out - New HARDOX guide rails welded in - Both side walls of the press channel disassembled and de-rusted - Worn side wall plates removed - Complete side walls fitted and welded with new wear plates - Main hydraulic cylinder disassembled and overhauled for inspection - Piston rod replaced, cylinder tube honed - All sealing sets replaced, pressure test performed - Vertical needle system for tying disassembled, cleaned, wire deflection pulleys serviced and maintained - Chain cleaned, greased, tension readjusted - Drillomat cleaned, wire cutter, drilling shafts and drilling fingers checked, retorqued, and serviced - Machine inspected, general maintenance work carried out, and baler tested in both manual and automatic operation Remarks: The baler is sold without a conveyor belt and without wire stations. Inspection is possible by prior arrangement. We assume no liability for the technical specifications or any errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, veikimo valandos: 44 590 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 200 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 2 000 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, alyvos bako talpa: 3 100 l, galia: 150 kW (203,94 AG), paskutinio kapitalinio remonto metai: 2025, Technical Data - Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Type: 112 Year of manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours as of December 2025 Main press force: 200 t Specific pressing force: 16.5 kg/cm² Feed chute dimensions: 2,000 x 1,020 mm Filling volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length adjustable Drive power: 2 x 75 kW Binding: 5-fold horizontal, fully automatic Throughput for MSW: approx. 48 to 54 t/hour, depending on material Hydraulic oil tank capacity: 3,100 L Machine weight, press: approx. 50.8 t Hsdjx Dnb Ujpfx Abvjnl Scope of delivery: 1 unit baler MACPRESSE, type 111A 1 unit operating manual with CE declaration, electrical and hydraulic schematic Remarks: The machine has been serviced and partially overhauled in our workshop. The following work was performed and parts replaced: • Hydraulic oil tank completely drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantling of the press ram, complete disassembly, overhaul of the mechanics • Replacement of the front two main guide rollers • Replacement of the knives on the press ram • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, all seals replaced • Replacement of the counter knife in the frame • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame renewed on left and right sides • Worn press floor cut out, bottom plate replaced with wear-resistant HARDOX steel • Dismantling of the tying and twisting unit, complete disassembly, overhaul of the mechanics, replacement of all twister shafts and ball bearings • Replacement of all wire rollers in the needle heads • Wire cutters cleaned and reset, chains lubricated and tensioned • All wire deflection pulleys made operational • All door contact switches replaced • Vibulator dismantled, disassembled and serviced • General maintenance performed Finally, the baler was subjected to a machine test in both manual and automatic modes—see our video for a functional test of the machine. The documentation (operator manual, CE, electrical/hydraulic schematic) is complete. Viewing by appointment is possible. No liability is assumed for the technical specifications or possible errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 170 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 800 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, bendras svoris: 40 000 kg, alyvos bako talpa: 3 000 l, paskutinio kapitalinio remonto metai: 2024, For sale is a used bale press system comprising an underfloor chain belt conveyor with feed hopper, a hydraulic pre-compactor with an agitator, a MACPRESSE 111A baler, two complete wire feed rack units with five spool holders each (no wire included). Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific compaction force: 14 kg/cm² Feed hopper dimensions: 1,800 x 1,020 mm Fill volume: 2.5 m³ Nominal throughput: 750 m³/h Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Wire tying: 5-fold horizontal, fully automatic Hnedpfx Aeu Th D Rjbvsl Throughput: approx. 30 to 35 t/h, material dependent Hydraulic tank volume: 3,000 L Transport dimensions (with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight: approx. 40 t Notes: The baler has been partially overhauled in our workshop and function-tested upon completion, as shown in our demonstration video. Previously, the line was used for baling paper and cardboard from municipal collection. As the contract was awarded elsewhere at the end of the term, the complete system is now for sale. A detailed photo documentation and our offer outline all performed refurbishment work and the installed new spare parts. Full documentation (operating manual, CE declaration, electrical/hydraulic schematics) is available. Viewing is possible by appointment. No liability will be accepted for technical data or potential errors. Technical Data – Conveyor: Manufacturer: Wagensfeld B.V. Model: Chain belt conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/min Loading belt length: 6,900 mm Incline belt length: 12,885 mm Gooseneck length: 1,747 mm Overall length: 21,271 mm Incline: 32° Usable width: 1,644 mm Drive shaft height above floor: 5,777 mm Side wall height, loading belt: 500 mm Side wall height, incline belt: 880 mm Steel cleat height: 40 mm Cleat spacing: 1,200 mm Transport dimensions (disassembled): 15,005 x 2,500 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Notes: The chain belt conveyor, manufactured in 2017, was custom built and installed for the baler during its last installation in the Netherlands. The conveyor is in good, ready-for-use condition and has not been overhauled. An installation drawing with pit dimensions is available. Scope of supply: - 1 unit chain belt conveyor, Wagensfeld B.V. - 1 unit feed hopper with pre-compactor flaps - 1 unit agitator - 1 unit MACPRESSE baler, type 111A - 2 units wire feed racks with wire spool holders, without wire - 1 unit operating manual with CE declaration, electrical and hydraulic schematics

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages Hodpfx Aevf E Avjbvjnl - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, veikimo valandos: 32 169 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 320 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 750 kg, bendras svoris: 22 000 kg, alyvos bako talpa: 900 l, For sale is a complete baling press system consisting of conveyor technology, baler (partially overhauled and tested), and wire stations. Technical Data of the Press: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main press force: 60 t Pre-press force max.: 25 t Feed opening dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale dimensions: 1,100 x 720 mm, length variable Drive power: 45 kW Total connected load: 60 kW Tying system: 5-fold vertical Throughput capacity at bulk density: 30 kg/m³ approx. 5.5 t/h 50 kg/m³ approx. 10 t/h 100 kg/m³ approx. 16 t/h Bale weights: 400 up to 750 kg, depending on material PLC control: Telemecanique TSX Micro Machine weight (press): approx. 22 t Scope of delivery: 1 chain belt conveyor 1 Bollegraaf baler HBC 60A with de-flaker (wirbulator) 1 maintenance platform with access ladder 2 wire stations with redirect pulleys for 10 wire coil holders (without wire) The following repair and overhaul work has been carried out: Hydraulic oil tank completely drained, cleaned, and refilled with new oil Oil and air filters replaced Partial resealing of hydraulic block Hnodoviwdmopfx Abvsl Hydraulic hose at hydraulic block replaced Wire mark grooves at floor entry points welded and smoothed Tying system cleaned and serviced Electrical system overhauled, door flap contact switches partially replaced De-flaker (wirbulator) repaired General maintenance performed, lubricated Machine tested during operation without material, in both manual and automatic modes – see function video Notes: The equipment has already been completely dismantled, stored, and is ready for immediate loading. Documentation (manual, CE, electric/hydraulic wiring diagrams) is available. Inspection possible by appointment. We do not assume liability for technical specifications or possible errors.

Būklė: paruoštas naudoti (naudotas), Presavimo jėga: apie 700 kN (apie 70 t) Variklio galia: apie 11 kW Maitinimas: 3 × 400 V / 50 Hz Vienos ritinio svoris: iki apie 600 kg Ritinio matmenys: apie 1100 × 1100 × 1200 mm Mašinos matmenys: apie 5,9 m ilgio, 2,5 m pločio, apie 2,6 m aukščio Mašinos svoris: apie 7 t Ciklo trukmė: apie 45–47 s Konstrukcinės ypatybės Hedpjra Dddsfx Abvenl - didelė užkrovimo anga kartonui - galimybė automatiniam padavimui (pvz., konvejeriu) - rankinis surišimas viela (4 vielos) - paletės fiksacija ir hidraulinės durys ritinio paėmimui Šios presos privalumai: - dideli ritiniai = mažiau transportavimo - didelė presavimo jėga - pritaikyta nepertraukiamam darbui Galimi gamybos metai: 2018–2020

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, pildymo angos plotis: 1 195 mm, pildymo angos ilgis: 65 mm, kamuolio ilgis: 120 mm, ryšulio plotis: 110 mm, ryšulio aukštis: 120 mm, balo svoris: 550 kg, bendras plotis: 1 570 mm, bendras aukštis: 2 985 mm, bendras ilgis: 1 800 mm, bendras svoris: 2 403 kg, Markė: HSM Modelis: V-Press 1160 plus Hnsdpfxsy R Sk Nj Abvjl Metai: 2008 Presavimo jėga: 532 kN Įtampa: 400 V Maks. ryšulio svoris: iki 550 kg (priklausomai nuo medžiagos) Ryšulio matmenys: 120 x 110 x 120 cm Įrenginio svoris: 2403 kg Įrenginio matmenys: 180 x 157 x 298,5 cm Pakrovimo angos matmenys: 119,5 cm × 65 cm Būklė: labai gera! Veikiančio įrenginio vaizdo įrašas pagal užklausą Transportavimas taip pat galimas

Būklė: geras (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 58 t, labai gera būklė, visiškai veikiantis, nedaug darbo valandų, pagaminimo metai 2021, spaudimo jėga 58 tonos Nauja kaina: matyta už 19 500 € Spaudimo cilindras buvo išmontuotas transportavimui, apžiūra galima pagal susitarimą. Hnodpfx Ajyzw U Uobvsl Sandėlyje yra ir daugiau presų

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 2 t, kamuolio ilgis: 1 200 mm, ryšulio plotis: 500 mm, ryšulio aukštis: 400 mm, balo svoris: 100 kg, bendras svoris: 1 820 kg, Tai visiškai automatinė presavimo mašina, surišanti ryšulius dviem plieninėmis vielomis (2,2 mm skersmens). Ventiliatorius per specialius 100 mm skersmens vamzdžius įpučia makulatūrą į įrenginį. Į kainą įskaičiuotas ventiliatorius ir apie 10 metrų ilgio vamzdis. Mašina veikianti, galima išbandyti. Parduodama dėl nenaudojimo; idealiai tinka spaustuvių ir higienos gaminių makulatūros presavimui. Hnjdey Ic Ruepfx Abvsl

Būklė: geras (naudotas), variklis 2,2 kW, spaudimo jėga 20 t, ryšulio svoris 200-250 kg, Mašinos matmenys: Aukštis: 2440 mm, Plotis: 1185 mm, Ilgis: 2480 mm, Pakrovimo anga: 1100 mm x 700 mm, Mašinos svoris: 1565 kg Hnjdjyti H Sopfx Abvel

Būklė: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Prieinama nuo 2026-05-15 Balių presas Paal Konti 325 G, pagamintas 2013 m. Techniniai duomenys: Gamintojas: Paal Tipas: Konti 325 G Pagaminimo metai: 2013 Darbo valandos: 11 723 (2026-02-10 duomenimis) Presavimo jėga: 100 t Variklio galia: 2 x 55 kW Įkrovimo anga: 1020 x 1750 mm Balių matmenys: 750 x 1100 mm, ilgis kintamas Penkiskart automatinis surišimas Našumas: 35 kg/m³ – apie 13,5 t/h 60 kg/m³ – apie 21,5 t/h 100 kg/m³ – apie 33 t/h Baliaus svoris iki 800 kg Transportavimo matmenys: apie 12216 x 2530 x 2800 mm (I x P x A) Įrenginio svoris: apie 28 000 kg Medžiagos: popierius, kartonas, lengvos atliekos, plastiko atliekos Atkreipkite dėmesį: Visi techniniai duomenys pateikti pagal gamintojo informaciją. Neatsakome už pateiktą informaciją ir galimas klaidas. Pasiūlymas nėra įpareigojantis, galimas pardavimas kitam pirkėjui ar atsiėmimas bet kuriuo metu. Apžiūra galima susitarus iš anksto. Hedpsy A Ibnefx Abvonl Pardavimas su išankstiniu apmokėjimu, iš gamyklos, be garantijos ir atsakomybės.

Būklė: geras (naudotas), Bramidan B 20 Baler Bale dimensions - WxDxH (mm): 1200 x 800 x 800 Feed opening WxH (mm): 1200 x 480 Pressing force: 20 tons Motor (kW): 4.0 Cycle time (s): 36 / 21 Baler dimensions WxDxH (mm): 1775 x 1030 x 2790 Weight (kg): 1600 Stroke (mm): 750 Number of bale ties: 4 Year of manufacture: 2012 - 2017 Price: 4500 EUR Bramidan X25 – High-performance Waste Baler Suitable for various materials, including stretchable ones Large, wide chamber Retaining claws to prevent the material from expanding in the chamber Short cycle time allows for quick waste compaction TYPES OF WASTE: Cardboard Plastic film Paper PET bottles Aluminum cans Rigid plastics Textiles EPS polystyrene Steel cans BALE DIMENSIONS: 1200 x 800 x 800 mm PRESSING FORCE: 25 t BALE WEIGHT: Cardboard (kg): 200-300 Plastic film (kg): 250-350 Year of manufacture: 2012-2018 Price: 5500 EUR ORWAK 3410 For paper, film, cans, PET bottles. Pressing force: 24 tons. Power supply: 3-phase 400 V, 50 Hz Bale dimensions: Width: 1200 mm Depth: 800 mm Height: 1000 mm Bale weight: up to 400 kg Year of manufacture: 2010-2013 Price: 4000 EUR Orwak 3420 Year of manufacture: 2014 Price: 5000 EUR Bramidan 4-OS Baler - price: 5200 EUR Hnedpfxsv Aku Ss Abvol Pressing force: 50 tons Baler 4-X25 - price: 4500 EUR

Būklė: geras (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, Baler Dixi 80 SLD, with lift/tip device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Throughput: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Hnodjy Avlnjpfx Abvsl Materials: Paper, cardboard, film The baler is in good condition. It has been checked and tested by us. A demonstration video is available on our website or YouTube channel. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for errors or inaccuracies in the details provided. This offer is subject to change, prior sale reserved, and can be withdrawn at any time. Inspections are possible by appointment. Sale ex works, advance payment required. No warranty or guarantee given.

Būklė: geras (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, Baler Dixi 80 SLD, with lift/tip device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Throughput: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Hedpsy Avhcjfx Abvenl Bale weight: approx. 500–600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The baler is in good condition. It has been checked and tested by us. A demonstration video is available on our website or YouTube channel. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for errors or inaccuracies in the details provided. This offer is subject to change, prior sale reserved, and can be withdrawn at any time. Inspections are possible by appointment. Sale ex works, advance payment required. No warranty or guarantee given.