Berkmann Industrie-Lackieranlage / Sprit Pramoninė Dažymo Įranga / Purškimo Kabina pirkti naudotą (43 245)

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin controls are intuitive and offered in three operation modes: automatic (temporary), automatic (via plug-in filter module), or manual. Filter Module Sensor The cabins are fitted with a sensor that collects filters for cleaning once they are clogged. The system also notifies you when filters have reached their usage limit. Automatic Filter Cleaning The electronic filter cleaning system manages both the cleaning intervals and the ignition timing. Each filter is cleaned individually; filters can also be manually cleaned using a press. From experience, we know that requesting operators to clean filters manually can be challenging. With this system, operators no longer need to interrupt their workflow for filter maintenance. Low Noise Level Aluminum fans operate at a very quiet noise level of just 74–79 dB. Even with the standard cabin design, it is difficult to communicate verbally during operation. Cjdofzciqjpfx Ab Hjrh Improved Workflow Cabins equipped with suspended squirrel-cage fans enhance work efficiency, freeing up painters from the need to move fans manually. Please pre-order assemblies. Safety Design The remaining cabin elements are designed to prevent the rise of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Credpfx Abefzktze Hsh Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, PARDUODAMA PILNA UV DAŽYMO ĮRENGINIŲ KOMPLEKTAS: SORBINI / CEFLA / BARGSTEDT Galima įsigyti atskiras mašinas! Parduodama pilna, pramoninė UV dažymo linija, skirta plokščių paviršių, baldų elementų, MDF, HDF plokščių, skydų ir kitų medienos pagrindo medžiagų apdailai. Linija yra aprūpinta automatiniu pakrovimo ir iškrovimo mechanizmu, plačiomis šlifavimo mašinomis, dulkių šalinimo sistemomis, keliais dažų dengimo įrenginiais, UV džiovinimo tuneliais ir UV spausdintuvu. Pagrindinė linijos įranga: • Automatinės pakrovimo ir iškrovimo sistemos BARGSTEDT • BARGSTEDT padėklų saugyklos • Plačios juostinės šlifavimo mašina BUTFERING OPTIMAT SCR 413/RREE su HEESEMANN EA2 dulkių šalinimo sistema • Plačios juostinės šlifavimo mašina BUTFERING OPTIMAT SCR 213/EE • SORBINI SMART SAND 1 šepetys • Daugybė CEFLA transportuoklių • Voliniai dažų dengimo įrenginiai: SORBINI KOMPACT SYSTEM SORBINI SMARTCOATER SP1 (keletas vienetų) SORBINI SMARTCOATER MF (keletas vienetų) • CEFLA džiovinimo tuneliai: karšto oro tuneliai IR tuneliai UV tuneliai (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV spausdinimo linija (3 galvutės) Linija leidžia atlikti visą technologinį procesą: šlifavimą, dulkių šalinimą, grunto ir dažų dengimą, UV kietinimą, UV spausdinimą ir galutinę paviršiaus apdailą. Tai idealus sprendimas baldų, baldų fasadų, dekoratyvinių skydų ir stalių gaminių gamintojams. Mašinos yra žinomų gamintojų: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Crjdpszg Epusfx Ab Heh Parduodamas pilnas linijos komplektas. Galima apžiūrėti iš anksto susitarus dėl datos. Išsami techninė specifikacija teikiama pagal užklausą.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, 1997 m. CMA Roby 5 EX antropomorfinis dažymo robotas (saviugda), su elektrostatišku purkštuvu ir generatoriumi. Generatorius ir purkštuvas – Sames. Crjdpfjxwctfsx Ab Hjh

Būklė: naudotas, Gamybos metai: 2016, Naudota Makor START ONE purškimo padengimo mašina, tinkama mažos apimties medienos apdirbimo gamybai. Skirta vandens pagrindu arba tirpikliais pagrįstų dažų ir klijų padengimui ant faneruotos produkcijos ir PVC plokščių. Idealiai tinka įmonėms, pereinančioms nuo rankinio padengimo prie automatizuoto purškimo. Įrengta PLC valdymo sistema su intuityvia sąsaja bei automatiniu plokščių aptikimu, siekiant optimizuoti dažų suvartojimą. Turi savivaldos popieriaus transportavimo sistemą, kuri sumažina techninės priežiūros poreikį ir prastovas. Purškimo agregate yra elektroniniu būdu valdomas osciliuojantis svertas, talpinantis iki 4 purškimo pistoletų, 2 aukšto slėgio padavimo kontūrai ir greito keitimo jungčių sistema. Efektyvi oro srauto ir filtravimo sistema užtikrina švarų darbą bei atitiktį aplinkosaugos reikalavimams. Codpfsx Iggyex Ab Herh Techniniai duomenys: • Transportavimo greitis: 1–4,5 m/min • Oro našumas: 10 000 m³/val. • Įdiegta galia: 7 kW • Darbinis aukštis: apie 900 mm

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Codpfx Abjfz I Ehe Herh Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Būklė: naudotas, Gamybos metai: 2023, The machine is ready for demonstration at our warehouse in Blomberg. The machine is prepped for painting and already equipped with: - 1 unit HD pump Binks Maple 8/25 up to 175 bar - 4 units Airmix spray guns Sames-Kremlin AVX. The machine features a change-over valve for quick colour changes, a lever to switch up to a maximum of 3 paint circuits, and 1 cleaning agent pump (optional). The machine is manufactured in explosion-proof (Ex) version. - Manufacturer: Ka-Ma - Model: KR BM 1000 B - Year of manufacture: 2023 - Working width: 1,200 mm (1,300 mm) - Single gun drive version - Dry extraction - Conveyor belt transport system - Continuously adjustable feed speed: 2 - 8 m/min - With paint recovery - Gun control: PLC, LS - Installed paint circuits: 3 units - Number of installed spray guns: 4 units - Spray guns: Sames/Kremlin AVX, Airmix - Airmix spray system - Height-adjustable spray guns: 150 mm - Pump manufacturer: Binks Maple 8/25 up to max. 175 bar - Including supply air filter ceiling - Suitable for water-based and solvent-based paints Cedpfxozf N Thj Ab Hsrh - Exhaust air capacity: 12,000 m³/h - Length: 3,243 mm - Width: 3,482 mm - Height: 2,450 mm - Voltage, Hz: 400 / 50 - Colour: RAL 7035, light grey - Weight: 3,100 kg _____ Optionally, we can also provide a quote for assembly and commissioning of the system, as well as training of your staff. On request, we also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Gamybos metai: 2020, būklė: naujas, The use of a photocell in the workpiece area allows measurement of its length, thereby enabling activation of the spray guns when the workpiece enters detection range, and deactivation of the guns immediately after coating is completed. The photocell is provided as standard equipment. Workpiece identification is carried out using special tags. Identification plates with holes are mounted on the workpiece hanger. Based on this, the PLC controller, in conjunction with the photocell, identifies the painted item and activates or deactivates the spray guns at the appropriate moment, resulting in savings of both energy and powder coating material. Vertical contour detection of the workpiece shape: The use of light barriers with horizontal sensors enables the PLC to analyze the vertical profile of the workpiece. The PLC controller calculates the time at which the workpiece should appear in the gun zone; based on this, selective activation or deactivation of the spray guns is possible. Cedpfsfy T Arjx Ab Herh Integration of light barriers with multiple sensors, both horizontally and vertically: This approach enables precise measurement of the workpiece’s dimensions, which also allows for manipulator control if required. The benefits of using photocells or light barriers are primarily the savings in powder and energy. Unnecessary spraying is eliminated in areas where no workpiece is present. Precise gun control is achieved through the use of light barriers.

Būklė: naujas, Gamybos metai: 2026, Rehnen Spray Table Lacky Advantages: Thanks to its 360° rotatable arms, it always provides optimal support and a stable surface for all workpieces. Easily adjustable in height and 360° rotatable for fast, efficient working. Due to its protective covers, the arms remain movable even after intensive use. Height (mm): 950–1250 Width (mm): 600–1120 Length (mm): 700–1260 Diagonal (mm): 900–1680 Load capacity (kg): 100 Location: available immediately from stock. Codpelrrrmjfx Ab Hsrh

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2011, veikimo valandos: 2 509 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 111313, bendras svoris: 520 kg, keliamoji galia: 15 kg, rankos pasiekiamumas: 2 800 mm, pasukimo diapazonas: 320 °, valdiklių gamintojas: FANUC, valdiklio modelis: R-30iA, teach pendant gamintojas: FANUC, valdymo spintos plotis: 800 mm, valdymo spintos aukštis: 1 360 mm, įėjimo įtampa: 400 V, įėjimo srovė: 20 A, įvesties srovės tipas: Oro kondicionierius, kartojimo tikslumas: 2 mm, This is a paint robot from Fanuc. It features a very special configuration. It was originally intended for coating wind turbine blades. For this purpose, it was mounted on a 60-meter-long rail, which included an additional rail enabling the robot to move up and down. Therefore, two large additional amplifiers are integrated in the controller. The encoder brake module is also duplicated for this reason. Another unique feature of this robot is that motors are installed in the shoulder to control two gear pumps, making 2-component mixing on the robot effortless. The robot was never actually put into operation. The operating hours accrued solely because the robot remained powered. The system operators (Enercon) have confirmed this. The actual Servo ON time is only 0.2 hours. The robot shows minor signs of contamination but is practically in mint condition. Unfortunately, the teach pendant and teach cable are heavily soiled, but they can be replaced if required. The cable length between the robot and the controller is 5 m and features a plug-in connection at the controller – another special feature. We provide a 1-year commissioning warranty. We can assist with transportation and installation. The robot is secured together with the controller on a special pallet measuring 2500x800x1600 mm, ready for transport. Crodpetu Hpqjfx Ab Hjh We have two units available; the price applies to one robot. It is currently configured as a right-arm/right-hand unit, but this can be easily converted without mechanical modifications. The unit can be viewed under power at Paintrobotics.

Būklė: naujas, Gamybos metai: 2026, Slėginė smėliavimo kabina vidiniam vamzdžių smėliavimui su sukamuoju stalu ir rankiniu veikimo režimu - Filtravimo sistema - Sukamasis stalas su prizmės formos įdėklu kaip vamzdžio atrama - Varoma vidinė vamzdžio strėlė - Programų išsaugojimas, važiavimo kelias, padavimo greitis, išpūtimo funkcija Csdpfx Asyn Inwsb Hsrh - Išorinė smėliavimo antgalis su osciliacija (pasirinktinai)

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 380 V, garantijos trukmė: 24 mėnesiai, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ 12-week delivery time ✈️ ✅✅✅Energy Efficiency Class A+++✅✅✅ ✳️Maintain your liquidity! We offer a wide range of financing options to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ➖➖➖➖➖ Cjdpfx Abefggcws Herh ►►►⌛⏰ FASTEST delivery time❗⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure both price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☀️ 2 YEARS WARRANTY ☀️ ✅The Multi-Treat spray pre-treatment machine is used for surface treatment of materials to be painted. It offers the ability to process up to 8 different chemicals with tanks configured according to process requirements. All tanks are made from 316 stainless steel and are insulated. The number of tanks and the number of heated tanks are determined based on process steps. ✅Tank heating is via gas heat exchangers. Processes can be monitored, and times and temperatures for all steps can be set via the PLC touchscreen. ✅Any system errors can be observed at the control panel. The tanks are equipped with automatic floats; the system stops automatically if there is insufficient water or chemicals in the tanks, and the fluid is automatically transferred between tanks as needed to keep the system safe. ✅There is a drip pan underneath all tanks, made from 316 stainless steel. The tanks are made of 2 mm thick 316 stainless steel. All materials undergo penetration testing and are argon-welded and hermetically sealed. Grids in the tanks prevent debris from reaching the pumps. The inside of the cabin is made of 304 stainless steel sandwich panels, while the exterior is powder-coated sheet metal. ✅The panel thickness is 80 mm. Panels are stainless steel filled with polyurethane. PPT ring pipes and nozzles ensure long service life. ✅Thanks to the steam extraction fan, steam from the system is prevented from entering the workspace. The washer cabin doors are container-style and sealed with silicone gaskets. The movable washing platform inside the cabin moves back and forth to clean the materials. Hoses are supported by a mobile carrier system. Each process has its own pumps and a waste pump for emptying tank fluids. The discharge pump connects to the chemical discharge tank. ✅Manual application guns are provided for each process for manual use. The system offers a manual pre-treatment mode. Both drip time and process duration can be set via the PLC control panel; drip time is applicable for manual operation.

Gamybos metai: 2025, būklė: naujas, A conformal coating machine is an industrial device used in electronics manufacturing to automatically apply a protective conformal coating to printed circuit boards (PCBs). This coating shields sensitive electronics from external factors such as moisture, dust, chemicals, corrosion, and temperature fluctuations. The machine applies a thin, uniform protective layer to selected areas of the PCB. This process is fully automated and repeatable, which is crucial for quality and reliability in series production. Transport system Transfers the PCBs through the machine (inline or stand-alone). Coating application Depending on the configuration: - Spray coating (selective or full) - Jet coating - Film or atomization technique XYZ positioning and motion system Ensures precise control of the spray valve. Vision and camera system (optional) For alignment, inspection, and process control. Masking / Selective coating Protects connectors, test points, and other zones that should not be coated. Drying or curing module For UV, thermal, or air curing, depending on the coating material. Control software Programmable for different PCB designs and recipes. Suitable coatings Codpfx Abjydnlhj Horh - Acrylic - Polyurethane - Silicone - Epoxy - UV-curable coatings Applications ICT conformal coating machines are widely used in: - Automotive electronics - Industrial controls - Medical equipment - Aerospace - Consumer electronics Benefits - Consistent and high coating quality - Reduced material waste - High repeatability - Suitable for mass production - Improved reliability and service life of electronics

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, bendras plotis: 20 200 mm, bendras ilgis: 12 000 mm, bendras aukštis: 10 750 mm, Profesionalus pramoninis palapinės tipo pastatas „Hallbyggarna Jonsereds“ – 242 m² Parduodamas: aukštos kokybės, nedaug naudotas pramoninis palapinės tipo pastatas, pagamintas Švedijos įmonės „Hallbyggarna Jonsereds“. Pastatas turi tvirtą plieninę atraminę konstrukciją ir patvarią PVC audinio dangą. Pastatas buvo įsigytas Švedijoje, profesionaliai išmontuotas ir šiuo metu yra Latvijoje, paruoštas montuoti naujoje vietoje. Pastato matmenys: - Plotis – 20,2 m - Ilgis – 12,0 m - Bendras plotas – 242,4 m² - Šoninės sienos aukštis – apie 8,0 m - Didžiausias aukštis – apie 10,75 m Csdpfxjz Iudnj Ab Herh Pastatas ypač tinka: - gamybos patalpoms - sandėliams ir saugojimui - įrangos saugojimui - žaliavų saugojimui - birių medžiagų saugojimui - medienos apdirbimui - žemės ūkio ir pramonės reikmėms - kitiems pramoniniams tikslams Papildoma techninė informacija ir brėžiniai teikiami pagal užklausą. Pastatą galima apžiūrėti išmontuotą Straupės parapijoje, Cėsio savivaldybėje, Latvijoje. Šio tipo konstrukcija yra gerokai tvirtesnė ir skirta profesionaliam pramoniniam naudojimui. Jos nereikėtų lyginti su lengvais PVC sandėliavimo palapinėmis ar paprastomis laikinomis pastogėmis. Kaina: 30 000 EUR (be PVM)

Būklė: naujas, ⭐⭐⭐⭐⭐ (5.0) 42 reviews ✈️ Shipping available: 45-day delivery ✈️ ✅✅✅Energy Class A+++✅✅✅ ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ⭐€10,850 PLUS VAT & SHIPPING⭐ ►►Buy-Now◄◄ ✳️Maintain your liquidity! We offer a wide variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST Delivery Time❗⌛⏰►►► ✨✨Buy directly from the manufacturer and benefit from our price and quality advantage!✨✨ Benefit from Proton’s 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Spray Booth – WETLINE-SP-1500 ✔️ Internal dimensions: 1390 mm L * 1500 mm W * 1400 mm H ✔️Pool height: 561 [mm] ✔️Filtration system: Double-layer water curtain ✔️Filter media: mains water, panel filter, and mechanical separator with backwash ✔️Filter media cleaning: fine and coarse grating ✔️Pump capacity: 1.5 [kW/h] 940 [rpm] x 1 unit ✔️Number of fans: 1 unit ✔️Fan capacity: 5,400 m3/h x 1 ✔️Fan motor power: 3 kW/h ⭐Booths can be manufactured from galvanized sheet or stainless steel. They can be designed for integration into both automatic and manual systems. ⭐A platform is installed at the pool for material and personnel safety, covering the entire pool area. ⭐In the Wetline spray booth, environmental pollution is prevented by the simultaneous application of three different filtration systems. ⭐Wet paint particles extracted from the air by a suction fan are captured by the water curtain at the rear of the booth and transferred to the pool. ⭐Trace amounts of wet paint particles not captured by the water curtain are collected by the separators located at the suction channels behind the water curtain, with fresh air discharged through the exhaust. ⭐A backwash system is applied in the separator section to enhance the retention of moist paint particles. The filtration efficiency, increased by spraying wash water through nozzles onto the contact surface, is maximized. Crodpfoc Uthdsx Ab Hoh ⭐Paint-contaminated wastewater accumulating in the basin passes through both coarse and fine grates as it enters the pump suction chamber, preventing clogging of the pump nozzles and ensuring effective retention of paint particles. ⭐When the wastewater in the pool becomes unusable, it can be drained by using the wastewater valve located behind the grates in the suction section. ⭐By implementing a paint separator system, the water in the basin is cleaned of paint and continually reused. ⭐Separated paint residues are dewatered by using a filter press and must be disposed of properly. ⭐The listed price refers to the smallest standard size in stainless steel. All equipment/machines are new, not used. Looking for a special configuration❗ Call us now❗ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, Spray Booth / Painting Wall Credpfjia Ta Hsx Ab Hoh The professional spray booth Reinox 300×185 is designed for partial painting and spraying operations in manufacturing environments where controlled filtration and safety measures in areas with explosive substances (ATEX) are required. Thanks to its powerful extraction system and three-stage filtration, it ensures a clean working environment even during intensive use. !! This is always a brand-new machine (Photos are from customer installations). We are the manufacturer. !! Technical specifications: - Fan certified for ATEX Zone 22 - Extraction area: 3,000 × 1,400 mm - Overall dimensions (without fan and control panel): 3,100 × 1,850 × 810 mm - Fan power: 3 kW (ATEX version) - Suction capacity: 16,000 m³/h (max. 1,100 Pa) - Power supply: 400 V / three-phase - Control: frequency inverter – stepless performance regulation via potentiometer on the control panel - Filtration: three-stage filter Certification & Documentation: CE, ATEX, complete technical documentation Warranty: standard Possibility to order machines in various tailor-made configurations and dimensions! Do not hesitate to contact us.

Būklė: naujas, Gamybos metai: 2026, BUMEX Sp. z o.o. | Industrial Powder Coating Technology Professional, compact powder coating system with industrial-grade quality, developed for series production as well as demanding workshop applications. Engineered for process stability, durable construction, and superior coating quality. Complete solution for immediate use in professional coating facilities. Scope of Supply ✅ Powder Coating Curing Oven 1200 × 1500 × 1800 mm ✅ Powder Coating Booth with Filtration System 1400 × 800 × 1400 mm POWDER OVEN — INDUSTRY STANDARD BY BUMEX Technical Data Working dimensions: 1200 × 1500 × 1800 mm Total power: 18 kW Design Highlights ✔ Stainless steel front frame prevents paint chipping in the door/frame area even after years of operation, ✔ Highly uniform temperature distribution due to powerful recirculation — no over- or underheating of workpieces, ✔ Robust industrial construction designed for continuous operation, ✔ Four patented BUMEX safety locks for optimal door pressure, chamber sealing, and maximum operator safety, ✔ Internal and external trolleys for ergonomic loading and unloading, ✔ Optimized airflow for reproducible coating results. Result: rapid heat-up, stable temperature control, and perfectly cured powder coating. Csdpohd Nrajfx Ab Horh POWDER COATING BOOTH Technical Data Working dimensions: 1400 × 800 × 1400 mm Fan power: 1.5 kW Air capacity: 6500 m³/h Premium Features ✔ Construction from powder-coated galvanized steel sheet for high corrosion resistance, ✔ 2 × 100% polyester filters with TWIST system — quick, tool-free change, ✔ Automatic filter cleaning for consistent performance, ✔ High-performance yet low-noise industrial fan, ✔ Stable airflow for effective powder separation, ✔ Ergonomic work area. BUMEX Quality Standard ✔ CE conformity, ✔ Complete technical documentation, ✔ Manufacturer’s warranty, ✔ Warranty and after-sales service, ✔ Professional technical consulting. Commercial Terms ✔ In-house transport — tailored pricing, ✔ Delivery with VAT invoice, ✔ Custom configurations available. BUMEX Sp. z o.o. We develop industrial technology for long-term reliability, safety, and stable processes.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2007, veikimo valandos: 92 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 82351, bendras svoris: 520 kg, keliamoji galia: 15 kg, rankos pasiekiamumas: 2 800 mm, pasukimo diapazonas: 320 °, valdiklių gamintojas: FANUC, valdiklio modelis: RJ3iC, teach pendant gamintojas: FANUC, valdymo spintos plotis: 800 mm, valdymo spintos aukštis: 1 360 mm, įėjimo įtampa: 400 V, įėjimo srovė: 20 A, įvesties srovės tipas: Oro kondicionierius, kartojimo tikslumas: 2 mm, This is a paint robot from Fanuc. It comes with a very special configuration. Originally, it was intended as a replacement robot at BMW for clear coat application on luxury car bodies. The robot was never used and is therefore in like-new condition. At BMW, these robots operated on a rail. For this reason, the controller is equipped with a large additional amplifier. The corresponding motor is included and can simply be connected directly to the robot itself, allowing for direct mounting onto the carriage. Another notable feature of this robot is the built-in motor in the shoulder, which is used to control a gear pump. This allows for precise dosing on the robot without issue. Credpfxotu H Avs Ab Hjh The cable length between the robot and controller is 2x10m and is pluggable at the controller. This means you have 10 m of cable, e.g. routed through a drag chain from the rail, and then another 10 m, also pluggable, to the controller. This is another special feature. We provide a 1-year commissioning warranty. We can assist with transport and installation. The robot is mounted together with the controller, transport-ready, on a special pallet measuring 2500x800x1600mm. Currently, it is configured as a right-arm, right-handed unit, but this can be easily changed without any mechanical modifications. The unit is still located at our customer’s site, but can be viewed under power at Paintrobotics, given serious interest. For this, we would arrange to transport the unit from Frankfurt to our facility.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, bendras plotis: 1 600 mm, bendras ilgis: 1 600 mm, bendras aukštis: 2 500 mm, Pramoninė akmenų atskyrimo sistema, skirta džinsų ir drabužių apdorojimo linijoms „Tonello Mini Destoner“ – tai profesionali pramoninė įranga, skirta akmenims pašalinti, pagaminta „Tonello S.r.l.“ (Italija). Ši įranga sukurta efektyviai atskirti pemzos akmenis nuo drabužių po akmenų skalbimo proceso, apsaugant tolesnius įrenginius, sumažinant rankinį darbą ir didinant gamybos efektyvumą. Integruota į profesionalias drabužių apdorojimo linijas, „Mini Destoner“ leidžia drabužiams suktis viduje, esant besisukančiame nerūdijančio plieno būgne, o pemzos akmenys praeina per perforuotą separatorių ir renkiami specialiai tam skirtame konteineryje apačioje. Ši įranga anksčiau buvo „MASI JEANS“ pramoninės džinsų apdorojimo linijos dalis ir tinka integruoti su „Tonello“ ir kitomis pramoninėmis drabužių skalbimo sistemomis. Techninės specifikacijos • Gamintojas: „Tonello S.r.l.“ • Modelis: „Mini Destoner“ • Įrangos tipas: Pramoninė drabužių akmenų atskyrimo įranga • Naudojimas: Automatinis pemzos akmenų atskyrimas po drabužių skalbimo akmenimis • Įrangos suderinamumas: „Tonello G1 330 HS“ ir kitos „Tonello“ pramoninės drabužių skalbimo mašinos • Vidaus identifikatorius: K344 • Pagaminimo šalis: Italija • Konstrukcija: Besisukantis nerūdijančio plieno būgnas, sumontuotas ant tvirto plieninio rėmo • Būgno apsauga: Perforuotas kūginis saugos separatorius • Elektros tiekimas: Paprastai 400 V, 3 fazės, 50 Hz (patikrintina apžiūros metu) Pagrindinės savybės • Sukurta specialiai drabužių apdorojimui po skalbimo akmenimis • Efektyvus drabužių ir pemzos akmenų atskyrimas • Besisukantis nerūdijančio plieno būgnas • Tvirtas perforuotas separatoriaus korpusas • Integruotas akmenų išleidimo latakas • Mobilus pramoninis plieninis rėmas su užfiksuojamais ratukais • Operatoriaus valdymo skydelis • Tvirti pramoniniai komponentai • Tinka nuolatiniam gamybos procesui Įskaičiuota • „Tonello Mini Destoner“ įranga • Besisukantis nerūdijančio plieno būgnas • Plieninė atraminė konstrukcija Csdpfx Abezmwlho Hjrh • Perforuotas separatoriaus korpusas • Akmenų išleidimo latakas • Operatoriaus valdymo skydelis • Surinkimo konteineris • Pramoninė transportavimo dėžė Naudojimo sritys • Džinsų skalbimas akmenimis • Drabužių apdorojimas • Pemzos akmenų pašalinimas • Pramoninė skalbykla • Tekstilės drėgnas apdorojimas • Džinsų gamyba • Pramoninė drabužių gamyba Būklė • Anksčiau naudota profesionalioje džinsų gamyboje • Gera pramoninė būklė • Struktūriškai pilna • Yra visi pagrindiniai mechaniniai mazgai • Normalūs kosmetiniai nusidėvėjimai, atitinkantys gamyklos naudojimą • Galima apžiūrėti prieš išmontuojant Vieta Valga, Estija Išmontavimas ir transportavimas Pirkėjas yra atsakingas už atjungimą, išmontavimą, pakrovimą, transportavimą ir su tuo susijusias išlaidas. Rekomenduojama profesionali įrangos tvarkymo paslauga, atsižvelgiant į pramoninę įrangos konstrukciją. Pardavimo sąlygos Parduodama tokia, kokia yra, esant tokioje vietoje, be garantijos. Tai dalis likviduojamos „MASI JEANS“ gamyklos. Įranga galima įsigyti atskirai arba kartu su visa „Tonello“ pramonine skalbimo ir apdorojimo linija.

Būklė: naujas, Gamybos metai: 2027, VG1E-VN KÉZIKÖNYVES, GYORS SZÍNVÁLTÓ PORFESTŐ RENDSZER A porfestő rendszer napi többszöri színváltással járó porfestési alkalmazásokhoz készült. Az egység görgős állványra van szerelve a könnyű kezelhetőség érdekében. A porfesték közvetlenül a porosdobozból kerül elszívásra, ami gyors színváltásokat tesz lehetővé. A porosdoboz egy vibrációs asztalon helyezkedik el; az elszívócső fluidizálja a port a dobozban, biztosítva a hatékony keveredést, és a por homogén módon, injektoron keresztül kerül a festékszóró pisztolyba. TECHNIKAI ADATOK Csdsvv N Tyspfx Ab Herh Bemeneti feszültség: 220V 50Hz Levegőigény: 350 l/perc Bemeneti nyomás: 6 bar Vibrációs motor: 220V 25W Bruttó tömeg: 55 kg VG4 VEZÉRLŐ ÉS KÉZI PORFESTŐ PISZTOLY A VM kézi porfestő pisztoly teljesen szétszerelhető. Az ergonomikus pisztolymarkolat kialakítása kényelmes fogást biztosít, és nem terheli a kezelőt a munkavégzés során. A nagyfeszültségű kaszkád hosszú élettartamú, tömítettsége megakadályozza a por bejutását, és minimalizálja az ebből adódó kockázatokat. A jól kialakított fej és fúvóka optimális polarizációt és homogén porfelvitelt eredményez az alkalmazás során. Az elektronikus érintőpanel a pisztoly hátoldalán egyszerű használatot tesz lehetővé. A vezérlőegység digitális, a beállítások érintőpanelen keresztül, pontosan szabályozhatók. TECHNIKAI ADATOK Pisztolytípus: Corona rendszer Polarizáció: Negatív Kaszkád bemeneti feszültség: 0-10,5 V DC Kimeneti feszültség: 100 kV Kimeneti áramerősség: 0-150 μA Porleadás (3,5 bar): 500 g/perc Védettségi osztály: IP 54 Feszültségkábel hossza: 5 m Porcső hossza: 5 m Pisztoly (bruttó) tömeg: 450 g Üzemi hőmérséklet: -20-50 °C Fúvóka: lapos sugár vagy Ø16-20-24 mm deflektor

Būklė: naudotas, „Herbot Industrie“ agurkų ir morkų pjaustymo mašina, modelis 26 E: Cedpjwq Ipzsfx Ab Hjrh Aukštos našumo pramoninė mašina. Nauja, kaip iš gamyklos, PLC valdymo sistema su dažnio keitikliu. Pjaustymo plotis gali būti nuolat reguliuojamas. Yra apie 250 atsarginių peiliukų. Mašina gali būti iš karto pradėta naudoti. Kaina nurodyta be PVM, tiesiogiai iš gamyklos. Pasiūlymas galioja be garantijos dėl prieinamumo.

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. Credpfx Aefz I D Dob Heh All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: geras (naudotas), Gamybos metai: 2000, For Sale. König Industrie Rex Automatic Bun Production Line Included: Dough Hoist-Tipper - Type: Herkules HK600/3000 Divider-Rounder – Model: Industrie Rex I – Type: T 6/5/4 S-1/1-70 9 – Year of manufacture: 2000 – with TRÖ pre-portioner with oiling system – 6 rows (rows can be reduced to 5 or 4) Long Moulder Slashing Unit Stamping Unit Intermediate Proving Cabinet – Model: KGV – Type: RR610 SOHN-L-(B) 1035 – Year of manufacture: 2000 Siemens S7 control system. Inspection possible here on site! Transport subject to agreement. Price: €60,000 EXW Available immediately. Cjdswtfkzopfx Ab Horh If you have any questions or comments, please do not hesitate to let us know. Best regards, Leo Holland

Gamybos metai: 2025, būklė: naujas, XX100292 Naujas CNC apdirbimo centras su 4 valdomomis ašimis FOM INDUSTRIE FMC 470 Įrenginys sandėlyje, paruoštas išsiuntimui Standartinė komplektacija: - Skysčiu aušinamas elektrospindelis, 7 kW, 20 000 aps./min. (HSK-F63) - 9 pozicijų įrankių magazinas ant galvos (HSK-F63) - 2 poros pneumatinių spaustuvų, pozicionuojamų per judančią koloną - 2 poros žemo profilio žandikaulių plačių profilių fiksavimui - Kairysis pneumatinių atramų ribotuvas Cedpfx Aboiv Imns Horh - Aliejaus minimalaus kiekio tepimas (MQL) - Centrinė automatinė tepimo sistema ir rankinio tepimo įtaisas - Drožlių ir atliekų surinkimo talpa korpuse - Perimetrinė apsaugos sistema su automatinėmis, priekyje įtraukiamomis durimis - X FLOW (automatinis tepimo purkštukų orientavimas) - Valdymas: POWER-D - Perkeliama valdymo pultas - 24” ekranas - FST CAM 4 programinė įranga Įdiegta papildoma įranga: - PR202941 Stacionarus 8 pozicijų įrankių magazinas centre, ant įrenginio pagrindo - PR202962 Įrenginys įrankių vientisumui tikrinti ir ilgiui matuoti - ZR204058 Švytuoklinis darbo režimas su keliomis detalėmis (2 darbo zonos, 4 detalės) ir nestandartinių ilgių apdirbimas su X-PAL: • Dvi papildomos nepriklausomai pozicionuojamos spaustuvų poros • Standartinių spaustuvų transformavimas į nepriklausomai pozicionuojamus spaustuvus • LED juosta • Profilių pozicionavimo programinė įranga • Apdirbimo ciklo eigos stebėjimo programinė įranga • Profilių ilgio matavimo įrenginys • Antras X-FLOW • Dešinysis pneumatinių atramų ribotuvas • Švytuoklinio darbo valdymo programinė įranga • Švytuoklinio apdirbimo saugos įrenginiai • Tunelis didelių profilių apdirbimui • Programinė įranga didelių profilių apdirbimui valdyti • „Laiko“ skaičiavimo modulis - PR202971 Duomenų importo programinė įranga pagal FOM protokolą ir belaidis optinis brūkšninių/QR kodų skaitytuvas - ZP715010 Standžios ir sekamos sriegimo moduliai - PR202957 Vingiuojanti juostinė transporto priemonė su nuožulnia rampa - PR203389 Galinė drožlių surinkimo talpa - PR202975 Įrankių komplektas A3/HSK F63 - PR202967 Kampinė galva su vertikaliu Ø230 mm disku - PR202968 Kūgis su horizontaliu Ø250 mm disku - PR204497 HSKF63 tvirtintuvas su Ø200 x 6 mm freza - PR203072 Spaustuvų slėgio reguliavimo programinė įranga (3,5 – 7 bar) - ZP714611 FST CAM 4 biuro versijos licencija

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S21K52-11-3, bendras svoris: 268 kg, rankos pasiekiamumas: 1 717 mm, Įranga: dokumentacija / vadovas, Parduodamas galingas ir tikslus 6 ašių pramoninis robotas „Yaskawa Motoman HP20“ (modelis: YR-HP20-B00) su patikima NX100 valdymo sistema. Ši sistema pasižymi itin kompaktiška konstrukcija, dideliu judėjimo greičiu ir universalumu. Jis idealiai tinka tokioms užduotims, kaip medžiagų tvarkymas, įrangos montavimas, pakavimas arba suvirinimas lankiniu būdu. Pagrindinės techninės specifikacijos: Gamintojas: Yaskawa Motoman Modelis / tipas: HP20 (YR-HP20-B00) Valdymo sistema: NX100 valdiklis Ašių skaičius: 6 valdomos ašys Naudingoji apkrova: 20 kg Maksimalus pasiekiamas atstumas: 1717 mm Atkartošanas tikslumas: ±0,06 mm Manipuliatoriaus svoris: apie 268 kg Komplektacija: Cjdpfx Aoz Euz Ueb Hjrh 1 vnt. „Motoman HP20“ roboto ranka (sumontuota ant tvirto plieninio pagrindo) 1 vnt. NX100 valdymo spinta 1 vnt. rankinis valdymo įrenginys 1 vnt. pilnas žarnų komplektas (roboto ir jungiamieji laidai) 1 vnt. originali techninė dokumentacija / vadovai