Kabina su milteliniu dažymu

ROMER KPD 3

Gamybos metai: 2026, būklė: naujas, ROMER cabins are equipped with 4" color touchscreens. The cabin is operated intuitively in three modes: automatic (time-based), automatic (based on a clogged filter sensor), or manual. Automatic filter cleaning The electronic system for automatic filter cleaning offers an adjustable range for cleaning frequency and ignition timing. Each filter is cleaned individually, and filters can also be cleaned manually via the control buttons. Fsdpfx Acofzkzhj Djga From experience, we know that it’s difficult for the operator to consistently perform filter cleaning. Thanks to this system, the operator no longer needs to worry about it. Aluminum fans are very quiet, operating at 74–79 dB—which is not very loud. It is difficult to talk, even with a standard cabin design. Browse through the cabin By pulling the lifting rails inside the cabin, the cabin improves work efficiency and relieves the painter, who no longer has to move them by hand.

Būklė: naujas, Gamybos metai: 2024, Tunneltípusú mosóberendezés fém és műanyag alkatrészek tisztításához. Különböző iparágakban használható, például az autóiparban, élelmiszeriparban, fémmegmunkálásban, lemezmegmunkálásban, műanyag ládák tisztításához stb. Működési elv: Fgodpfx Aod I Azvoc Dsa A munkadarab szállítószalag segítségével jut be a tunnelbe; a pozícionált szórófejek minden felületet alaposan megtisztítanak. A munkadarab a tunnelben haladva nyomás alatt lévő és felmelegített víz + vegyszer keverékével kerül átmosásra. E folyamat során minden olaj, forgács, valamint egyéb ipari szennyeződés eltávolításra kerül a munkadarab felületéről. A tunnel típusú mosógépek szabványos, illetve az alkalmazásnak megfelelően egyedileg tervezett kivitelben is elérhetők az INTERSONİK mérnöki csapatának köszönhetően. Mosási folyamat: - Mosás - Passziválás - Szárítás A folyamatot az Intersonik folyamatmérnökei tervezték meg a kívánt eredmény és a környezetbarát Intersonik vegyszerek alkalmazásával. A működés folyamata: ► Előmosás ► Főmosás ► Öblítés ► Passziválás ► Szárítás Alkalmazási területek: ► Autóipar ► Katonai-védelmi ipar ► Élelmiszeripar ► Minden gyártóipar, ahol tömeggyártás vagy karbantartás zajlik ► Fém bútoripar A szállítószalagot az INTERSONIK az Ön igényeihez és a munkadarabhoz igazítva tervezi és gyártja. A szalag sebessége állítható. Az automatikus folyadékfeltöltés alapfelszereltség. Az elektromos fűtés standard, hőcserélős vagy égős fűtés opcióként választható. Minden adat digitális kijelzőn követhető és vezérelhető. A PLC vezérlés opcionális. Minden folyadéktartály hőszigetelt a hőveszteség csökkentése érdekében. A ködgyűjtő vákuumszivattyú és egység szintén alapfelszereltség. További opciókért és részletekért kérjük, vegye fel velünk a kapcsolatot. Kulcsszavak: tunnel mosó, automata mosó, autóipari alkatrészmosó, fémmosás, alkatrészmosó, zsírtalanítás, szórófejes mosó, nyomás alatt működő mosóberendezés

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Fsdpjfz A Ilefx Ac Dsga Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk. Fgsdpfefzktzjx Ac Dsa

Būklė: naujas, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I • 2-column miter saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation due to inclined cutting, feed rate and cutting pressure control • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning) • Energy-efficient and low-vibration operation through inclined cutting • Ergonomic, safe, and freestanding control panel • Frequency-controlled saw drive 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-diameter flywheels (520 mm) • Clear mitre adjustment up to 60° Fgsdjd Iipmepfx Ac Dsa Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to start of material or cut immediately for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. Fgedofz A Iwopfx Ac Dja From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin controls are intuitive and offered in three operation modes: automatic (temporary), automatic (via plug-in filter module), or manual. Filter Module Sensor The cabins are fitted with a sensor that collects filters for cleaning once they are clogged. The system also notifies you when filters have reached their usage limit. Fgedefzciqopfx Ac Dea Automatic Filter Cleaning The electronic filter cleaning system manages both the cleaning intervals and the ignition timing. Each filter is cleaned individually; filters can also be manually cleaned using a press. From experience, we know that requesting operators to clean filters manually can be challenging. With this system, operators no longer need to interrupt their workflow for filter maintenance. Low Noise Level Aluminum fans operate at a very quiet noise level of just 74–79 dB. Even with the standard cabin design, it is difficult to communicate verbally during operation. Improved Workflow Cabins equipped with suspended squirrel-cage fans enhance work efficiency, freeing up painters from the need to move fans manually. Please pre-order assemblies. Safety Design The remaining cabin elements are designed to prevent the rise of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Būklė: naudotas, Gamybos metai: 2010, Pallets: 2 Number of Axles: 4 pcs. Tool Holder: HSK 63 Tool Magazine Capacity: 60 Weight: 9,600 kg Spindle Speed: 18,000 rpm Coolant Filtration System: Yes Fsdpsqn A Rkofx Ac Dsga Chip Conveyor: Yes

Būklė: naudotas, Gamybos metai: 2013, Venjakob Perfect Paint Finishing Line: - Manufacturer: Venjakob - Year of manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped layout with 90° transfer station Comprising: 1. Infeed conveyor, length 3,050 mm 2. Space reserved for a sanding machine (optional) 3. VEN SPRAY PERFECT spray machine, length 5,510 mm 4. OIR flash-off dryer, length 6,000 mm 5. VEN DRY AIR JET nozzle dryer, length 4,160 mm 6. 180-degree angle transfer with nozzle dryer 7. Supply air unit for angle transfer, 25,000 m³/h 8. VEN DRY AIR JET nozzle dryer, length 5,160 mm Fgedpfju Afu Rox Ac Doa 4 infrared emitters 9. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 infrared emitters 10. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 infrared emitters 11. 3D UV dryer, VEN DRY UV, GA + HG 12. Discharge area, conveyor of the UV dryer 13. Supply air unit for hall, 30,000 m³/h Further information: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, lazerio bangos ilgis: 1 030 nm, galia: 5 kW (6,80 AG), Manufacturer: Trumpf Model: TruDisk 5001(6C) Year of manufacture: 2018 Laser power: 5 kW Wavelength: 1030 nm Beam quality: < 100 µm Central sensor interface: yes OEM laser: yes Output power 1: 100% Output power 2: 100% Output power 4: 100% Beam quality output 1: >= 4 mm x mrad, >= 100 µm NA01 Beam quality output 2: >= 4 mm x mrad, >= 100 µm NA01 Beam quality output 4: >= 4 mm x mrad, >= 100 µm NA01 Active laser power control: yes Live power display: yes Panel computer: yes Fsdpfsr Izwmjx Ac Doga Processing optics cooling: yes Water connection kit: yes Ethernet in user area: multiple Number of occupied LLK: 4 Number of intelligent optics: 4 Number of occupied couplings: 4 Number of couplings: 4 LLK coding (ILN): yes LLK type: LLK-D TLS number: 20-10-03-A105 Additional interfaces: no Parallel interface: yes Interface output 1: Profinet Interface output 2: Profinet Interface output 3: Profinet OPC UA interface: yes VisionLine preparation: yes Number of VisionLine Basic: 2 Number of VisionLine Detect: 0 Number of VisionLine Interface: 1 Number of VisionLine Project: 0 I-PFO preparation: no PFO Smart Teach App: no TLS machine: no TruControl Module Cutassist: no CE/UKCA declaration: Installation declaration with appendix