Miltelių dengimo įranga, OVEN

ROMER Kompleksowe lakiernie proszkowe

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Iedofz Dubopfx Aauear Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: naujas, Matmenys (I x P x A): 1.630 x 700 x 1.200 mm Svoris apie: 480 kg Bendra galingumo poreikis: 1,1 kW Lenkimas: 2 Lakšto storis: 3 mm Lakšto ilgis: 1050 mm Techniniai duomenys Lakštų valcavimo staklės Volelio skersmuo: 90 mm Valcavimo greitis: 6 m/min. • asimetrinis volelių išdėstymas • 2 volai varomi stabdžio varikliu • Galinio volelio nustatymas su rankenėle • Išskleidžiamas viršutinis volelis • Kūginio valcavimo įtaisas • Dvigubas pakojų jungiklis dešinės/kairės eigai Iaedpfx Aed Eqqqoaujr • Apatinis ir galinis volai su vielos grioveliais • Veikimo instrukcija VOKIEČIŲ kalba PAPILDOMAI: grūdinti volai – 900 EUR

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. Isdpfx Aefz Dt Nsaujar All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Ijdpfxsfz I Edo Aausar Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: naudotas, Used 3D printer EOSINT M 270, low operating hours (4910) Iedpfxjwd Ulvj Aausar

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. Iasdpfx Aaofz Nb Tsuer - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Oro kondicionierius, Taškinio suvirinimo aparatas, tipas KAP10 CE sertifikuotas Valdymas: pastatomos konstrukcijos Galia prie 50 % ED: 10 kVA, nuolatinė galia: 7,1 kVA Suvirinimo pajėgumas: 1,5+1,5 mm plieno lakštas Transformatoriaus konstrukcija: - Pirminė apvija: varinė viela - Antrinė apvija: lanksčia vario folija - Šerdis: silikoninio plieno EI šerdis Energijos tiekimas: 220 V/400 V (50 Hz) Apsauginis saugiklis: 220 V – 40 A / 380 V – 25 A Galingumo pakopa: 5 Svirties ilgis: 500 mm Svirties diametras: 40 mm Elektrodai: reguliuojamas elektrodo eiga Maitinimo laidas: 3 m Apsaugos klasė: IP21 Užimama erdvė (P/I/A): 380 mm x 1000 mm x 1050 mm Iajdpskwcbyefx Aausr Svoris: 110 kg Garantija: 1 metai (+10 metų atsarginės dalys palaikymas)

Būklė: naujas, Table width 3000 mm Table length 1500 mm Torch heads 1 Control CNC Feed rate 20,000 mm/min Total power requirement 15 kVA Space requirement approx. 4.5 x 2.5 m * Heavy machine bed with precision guides for smooth machine travel * Cross carriage with ball bearings, offering height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting area ensures maximum precision * Automatic height detection and torch height control during cutting * Torch holder with collision protection and automatic shut-off in case of collision * Installation or relocation of the machine possible via plug & play method using forklift, pallet truck, or crane * 3-sided access to cutting area thanks to cantilever design SATOTEC Extraction Table: The SATOTEC table system features a robust table construction for a maximum cutting thickness of 150 mm. For cutting workpieces up to 150 mm thick, oxy-fuel cutting technology is required. The workpiece support frame is equipped with replaceable 3 mm flat-bar slats, mounted at a 45° angle. The spacing between the slats is 50 mm. Power Source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, can be increased with ProPierce Technology * Marking, grooving, and scribing of coated metallic materials Iaodpepm U U Nefx Aauer * Inverter power source with digitally managed, fully electronic process cycle * Integrated cooling system with semi-automated filling and draining Gas Control: Fully automatic, processor-controlled plasma universal gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction System TEKA EcoCube 5.5 kW Filter medium: dry, fat-free or oil-free dust / fumes Filter area: 100 m² (4 cartridges @ 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (per BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz Current consumption: 11.5 A Voltage type: 3Ph+N+PE Fan installation: on the unit, incl. silencer duct bend, right side Motor control: frequency inverter Noise level: 75dB(A) + max 10 dB(A) during cleaning pulse Intake nozzle: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: light grey - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Closing hooks and toggle latches - Compressed air connection and condensate drain each fitted with cable gland - Compressed air connection with hose nozzle d=8mm - System equipped with grounding bolt - Cables in UL version - EATON frequency inverter installed on the left in attached control cabinet

Būklė: naujas, - Capacity 1070 x 2 mm - Conical rolling - Removable top roller - Foot control - Emergency stop - Documentation - 400V Isdjhc Uvmjpfx Aauoar

Būklė: naujas, Gamybos metai: 2023, Sheet width: 1540 mm Sheet thickness: 4 mm Top roll diameter: 110 mm Lower roll diameter: 110 mm Iodpfxevx Uvxj Aausar Bending roll diameter: 110 mm Total power requirement: 1.1 kW Machine weight: approx. 0.9 t Space required: approx. 2.5 x 0.6 x 1.1 m New machine Cone bending device, hardened and ground rolls, motorised bending roll stationary control panel, digital display for the right and left bending roll, digital display for the lower roll