Dažymo purškimo įrenginys

Makor Start One

Sąlyga: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads Ksdpsrigxyefx Af Ijll - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2004, WEINIG UNIMAT SUPER 4 Planer/Moulder – German-made – Very good condition – Year of manufacture: 2004 – Technical documentation (manual included) TECHNICAL SPECIFICATIONS: Planing width: 150 mm Planing height: 50 mm Spindle diameter: 40 mm Equipped with tooling Adjustable top spindle head Kedpfjin Nrgox Af Isll 1) Bottom spindle: 11 kW, 6000 rpm 2) Top spindle: 18.5 kW, 7000 rpm 3) Lower spindle: 5.5 kW, 6000 rpm Feed motor: 2.2 kW Feed rate adjustable via inverter: 0–18 m/min Feed via cardan shafts Pneumatic pressure system Three top steel feed rollers One top rubber roller Ribbed infeed table Infeed table length: 1,950 mm Total power: 37 kW Central lubrication system Transport dimensions: Length/Width/Height: 320x220x220 cm Weight: approx. 2,700 kg

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. Kjdpfemhhf Sjx Af Ijll The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.

Sąlyga: naudotas, Painting line consisting of: Pos.1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - 2 upper air blast ducts - 1 lower air blast duct - Dust removal brush - With ionizing bar above - With ionizing bar below - With own drive - With independent control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction port diameter: 180 mm + 120 mm - Total connected load: 7.6 kW - Voltage, Frequency: 400 V / 50 Hz Pos.3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual spray gun drive - Dry extraction - Extraction port diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Continuously variable feed rate ~ 4–10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control EPS-CNC 7000 - Color management system for 3+1 pump units - Number of installed Airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at the machine outlet - Exhaust air recirculation system - Extraction fan air control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~20–26 kW - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small batch container - Spray gun boom system for quick removal of 4 AirMix spray guns from the spray cabin, incl. quick couplings for pneumatic and material hoses. Pos.4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg - Max. part height: ~110 mm - Clear height between pallets: 120 mm - Distance: center of pallet to center of pallet: 3,658 mm - Max. part length: ~5,200 mm - Number of controllable temperature zones: 2 pcs. - Fresh air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Max. heating capacity: 175 kW - Max. drying temperature: ~55–60 °C - With heat exchanger, hot water - Without hot water control valves - U-shaped pass-through configuration - Infeed side right - Feed speed via frequency inverter ~2–20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~23 kW - Voltage, Frequency: 400 V / 50 Hz - Voltage fluctuations max. ±5% - Without control valves and water pumps Pos.6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm Kledev I Akvopfx Af Isl - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035

Sąlyga: naudotas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: A1711012, Pos. 1 VEN CLEAN Smart Dedusting Unit Compressed air dedusting system for cleaning workpieces to be painted from dust on profiled workpiece surfaces. Five rotating air-blast stars are installed; these loosen dust from the surface. The loosened dust is extracted on both sides by suction ducts. An external extraction system must be provided onsite. Technical Data: Kodpfsu U Ryyox Af Ioll Roller conveyor length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h (to be provided by the customer) Compressed air consumption: 980 Nl/min Ionization as nozzle bar, not explosion-proof, with compressed air nozzles Compressed air consumption: 840 Nl/min Pos. 2 VEN SPRAY Comfort Automatic Spraying Machine - Manufacturer: Venjakob - Model: VEN SPRAY Comfort CNC 7000 - Year of manufacture: 2017 - Working height approx. 930 mm ±20 mm - Working width: 1,300 mm - Operator side: left - Price for overhauled machine - Current state: machine not overhauled - Dual gun drive configuration - Dry extraction system - Extraction port diameter: 500 mm - Exhaust air capacity: 7,000 m³/h - Conveyor belt transport system - Continuously adjustable feed speed ~2–6 m/min - Equipped with a belt cleaning system featuring a scraper in tungsten carbide design Complete pre-equipment for retrofitting a second washer is present. - Gun control unit, touch screen CNC7000 - Installed paint circuits: 1 unit (optional expansion possible) - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Free-standing control cabinet - Voltage, Hz: 400 / 50 - Colour: RAL 7035 - Location: in stock - Voltage fluctuations max. ±5% _____ Optionally, we can also provide you with an offer for assembly and commissioning of the system, as well as staff training. Upon request, we also offer regular maintenance and servicing of the machine. If you require further information, please do not hesitate to contact us!

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007928, Pozicija 1: Šepetėlinė mašina CEFLA-EASY 2000 + TR2V-FV3 Pozicija 2: Lako dengimo mašina CEFLA-EASY 2000 + TR2V-FV3 Pozicija 3: Lako džiovintuvas CEFLA-EASY 2000 + TR2V-FV3 Klsdpfjwu Ackox Af Isl

Sąlyga: naudotas, Gamybos metai: 2004, mašinos/transporto priemonės numeris: 02919475, - Manufacturer: Cefa - Model: KLEENSPRAY - Year of manufacture: 2004 - Working width: 1,200 mm - Working height: 900 mm +/- 20 mm - Operating side: left - Gun drive: single design - Dry extraction - Extraction nozzle diameter: 490 x 350 mm - Exhaust air capacity: 6,500 m³/h - Paper belt transport system - Infinitely variable feed speed: 1.5 - 7 m/min - PLC control with touchscreen - Number of installed spray devices: 0 pcs. - Height-adjustable spray devices - Number of paint pumps: 0 pcs. - Suitable for solvent-based paints - Suitable for water-based paints - Length: 4,450 mm - Width: 3,360 mm + 1,000 mm - Height: 2,600 mm - Total connected load: ~ 7.1 kW / 28.6 A - Voltage, Hz: 400 / 50 Kledpfx Asv N D Ewsf Iel - Location: in stock - Voltage fluctuations max. +/- 5 % _____ Optionally, we can also provide an offer for the installation and commissioning of the system, as well as training of your employees. Upon request, we can also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Sąlyga: geras (naudotas), Gamybos metai: 2008, Parduodu keturpusę obliavimo staklę Weinig Unimat 300. Pagaminimo metai: 2008. Pavaros greitis: 5-30 m/min. Darbinis plotis: 230 mm, darbinis aukštis: 130 mm. 5 velenai. Konfigūracija: apačia - dešinė - kairė - viršus - apačia. Bendra galia: 28 kW. 3 zonų pneumatinis spaudimas. Geros būklės, visiškai veikianti! Prieinama iš karto. Ksdor Arr Eepfx Af Ioll

Sąlyga: naudotas, Gamybos metai: 2005, mašinos/transporto priemonės numeris: A0407004, - Manufacturer: Venjakob - Model: VEN SPRAY DUO/C CNC 6000 - Year of manufacture: 2005 - Working width: 1300 mm - Operator side: right - Price for refurbished machine - Current condition: machine not refurbished - Gun drive in DUO design - Dry extraction system - Extraction nozzle diameter: 500 mm Kodsumvu Uspfx Af Ioll - Exhaust capacity: 10,000 m³/h - Belt conveyor system - Feed speed steplessly adjustable ~ 2 - 7.5 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, CNC touch screen - Installed colour circuits: 1 pc. - Quick-change system for spray apparatus - Supply air filter ceiling - Suitable for water-based coatings - Suitable for solvent-based coatings - Control cabinet integrated in machine - Total connected load: ~29 kW - Voltage, Hz: 400 / 50 - Colour: RAL 7035 - Location: in stock - Voltage fluctuations max. +/- 5 % The image shows an example of a refurbished automatic spray machine. _____ Optionally, we can also provide you with an offer for assembly and commissioning of the system, as well as training of your staff. Upon request, we also offer regular maintenance and servicing of the machine. For further information, simply contact us!

Sąlyga: labai geros būklės (naudotas), working width 230 mm working height 120 mm 4 heads head arrangement: bottom/right/left/top/bottom Kedpfx Afjqfd Dle Ioll spindle diameter 40 mm pneumatic feed roller pressure bed lubrication system