Džiovintuvas pirkti naudotą (40)

Sąlyga: geras (naudotas), Gamybos metai: 2009, Parduodama dažymo linija GIARDINA MOS/4PLUS Hnsdpfx Ajtxnp Necuou

Sąlyga: labai geros būklės (naudotas), Code: M5036/1716 Paint spraying carousel Number of hangers: 10 Dimension 1: 322 cm Dimension 2: 261 cm Hnedst A U Niopfx Acuou

Sąlyga: naudotas, Gamybos metai: 2007, UV Dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445 mm) - Working height: 900 ± 40 mm - Operator side: right - Max. part height: 70 mm - Number of lamps (top): 2 pcs - Lamps in straight position: 2 pcs - Suitable for mercury lamps Hsdpfx Acoxn Nlvjujnu - Suitable for gallium lamps - Lamp power: max. 120 W/cm - Bar conveyor - Length: 2,500 mm - Width: 2,300 mm - Height: 1,500 mm - Voltage/Frequency: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations: max. ± 5 % *Pictures are for reference only; illustrate a similar model*

Sąlyga: naujas, Cefla dažymo sistema Hnodpfx Acowhbrwoueu

Sąlyga: naujas, Gamybos metai: 2014, I am selling a BURKLE hot air drying tunnel Model: Easy Dry JET 1300 Filter: TRDUE / 700 m³/h Fan: 7.5 kW / 6800 m³/h / 35 m/s Working width: 1400 mm Total length: 6.00 m Hsdpfsr Arrwjx Acuonu Electrical connection: 36.5 kW Hot air system: 12 blower units Heating medium: water up to 80°C Max. heating capacity: 45 kW Max. heating surface temperature: 120°C Siemens Simatic touch control panel Year of construction: 2014. System is NEW, never used! Available immediately.

Sąlyga: geras (naudotas), Gamybos metai: 2010, Poliedra is a dryer designed for curing UV coatings on three-dimensional surfaces. In spray applications, the UV dryer must also cure the product on the vertical edges of the panel. Superfici developed UV modules with special reflectors. The unique geometry of the “Poliedra” UV reflector ensures consistent UV radiation distribution across both the surface and the edges. This makes it possible, using a single lamp tilted in relation to the feed direction, to irradiate the surface, all panel edges, and all collectors on the board. Hedpfjmmbvtex Acusnu Working width: 1300 mm Emitters: 1 x Ga and 1 x Hg (new emitters) / 1700 mm – 120 W/cm Power: 40 to 120 W/cm

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2009, Direct-fired dryer (L=1300mm) Hnsdpfxjryw Eij Acuju - Number of lamps: 1 - Lamp power: (80 W/cm²): 11.4 kW (100 W/cm²): 14.3 kW (120 W/cm²): 17.2 kW - Exhaust fan power: 0.55 kW - Exhaust fan air flow: 900 m³/h - Installed power (120 W/cm²): 17.7 kW - Minimum workpiece length: 400 mm - Maximum workpiece thickness: 70 mm - Maximum workpiece width: 1300 mm - Compressed air consumption: 4 NI/cycle The set also includes a complete set of new lamps.

Sąlyga: naudotas, Drying oven with UV lamp for roller coating line. Maximum working width: 1300 mm. Max. processable thickness: 40 mm. Drying system equipped with 2 UV lamps. Transport system with motorized rollers. Separate control cabinet. Hnsdewq Subopfx Acusu

Sąlyga: naudotas, Gamybos metai: 2013, mašinos/transporto priemonės numeris: A1312006-0030, - Gamintojas: Venjakob - Tipas: VEN DRY OIR 38/40 - Pagaminimo metai: 2013 - Darbinis plotis: 1.300 mm - Darbinis aukštis: 940 +/- 20 mm - Garavimo kanalo ilgis: 3.800 mm - Paduodamo oro našumas: 100 m³/h - Ištraukiamo oro našumas: apie 500 - 1.000 m³/h - Cirkuliuojančio oro našumas: apie 3.000 m³/h - Maksimali džiovinimo temperatūra: apie 30°C - Oro greitis: 0,5 - 2 m/s - IR spinduliuotuvai: 12 vnt. - IR spinduliuotuvų galia: 12 x 1,5 kW - Juostinis transporteris, ilgis: 4.000 mm - Vietovė: sandėlyje - Įtampa, Hz: 400/50 Hnsdpfxoxfkbao Acuju - Įtampos svyravimai maks. +/- 5 % - Valdymo spinta su jutikliniu ekranu

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 300 mm, transporto ilgis: 7 500 mm, tūrio srautas: 40 000 m³/val, bendras ilgis: 7 500 mm, FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E Hodpfjw H Aw Sox Acusnu Heating medium - Electric Installed electrical power: approx. 100 kW The in-line hot air dryer is suitable for fast evaporation and curing processes. This dryer features a laminar flow of hot air in the opposite direction to the feed of the panels, with recirculating air adjustable as required. Total length: 7,500 mm Working width: 1,300 mm Total width: 1,783 mm Maximum drying height: 1,780 mm (excluding conveyor) Usable pass-through height: 80 mm Solvent-laden air exhausted to outside: 0–4,000 m³/h Autonomous electric control cabinet Machine control via 5.7" LCD touch panel for complete management of operating parameters Capability to save and recall recipes VS explosion-proof supply/recirculation fan: Motor power: 2.2 kW; Airflow rate: 40,000 m³/h; Exhaust electrical power: 1.5 kW; Supply air to the room: 0–4,000 m³/h; Installed heating capacity: 76,400 kcal/h (heating coil 90 kW) (Subject to technical modifications, errors and prior sale)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, I am selling a 2-head, 2-lamp UV curing tunnel Burkle TRUV 1300, year of manufacture 2015. Working width: 1300 mm. Overall length: 2.80 m + 3.00 m. Total power: 36.6 kW. 2 lamps: GA 120 W + HG 120 W. In very good condition, immediately available. Hjdpfx Asw Anclscuonu

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1998, Marke: Superfici Typ: TU166-20+1UVM55 Maschinennummer: 4632 Baujahr: 1998 Max. Arbeitsbreite: 1300 mm Anzahl der Lampen: 1+3 Steuerschrank vorhanden. Hodpswaydpefx Acuenu Lager-Nr.: 2002484BXM

Sąlyga: naudotas, Gamybos metai: 2006, mašinos/transporto priemonės numeris: A 06 06 010/ 0300, Išgarinimo džiovintuvas VEN DRY OIR - Gamintojas: Venjakob - Tipas: VEN DRY OIR 38/40 - Pagaminimo metai: 2006 - Darbinis plotis: 1 300 mm - Darbinis aukštis: 940 ± 20 mm - Garavimo kanalo ilgis: 3 800 mm - Paduodamo oro našumas: 100 m³/h Hjdpfxexfi Ixo Acuenu - Ištraukiamo oro našumas: apie 500–1 000 m³/h - Cirkuliacinio oro našumas: apie 3 000 m³/h - Maks. džiovinimo temperatūra: apie 30 °C - Oro greitis: 0,5–2 m/s - IR spinduliuotuvai: 9 vnt. - IR spinduliuotuvų galia: 9 x 1,5 kW - Transportavimas konvejerio juosta - Ilgis: 4 000 mm - Vieta: sandėlyje - Įtampa, dažnis: 400 V / 50 Hz - Įtampos svyravimai maks. ±5 % - Valdymo skydelis su jutikliniu ekranu

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, I am selling a 2-head UV curing tunnel Superfici Essiccatoio UV, model Poliedra S.Cure 1650x2 + TT1 3500, year of manufacture 2015. Immediately available. Requires repairs: display and power sources for both UV units. Hodpfxoffk Ete Acujnu

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 3281, - Manufacturer: Elmag Superfici - Working width: 1300 mm - Number of top lamps: 2 pcs - Lamps positioned straight: 2 pcs - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power: 80 W/cm Hodpfx Aoumvmkocuonu - Step switch: 80 / 40 W/cm - Feed speed adjustable via handwheel: approx. 2 – 7.5 m/min - Location: in stock - Voltage, frequency: 400 V / 50 Hz

Sąlyga: naudotas, for installation on an existing bar conveyor. Scope of delivery: Tube housing with exhaust fan and control cabinet. Without conveyor. - Manufacturer: Cefla - Model: ECO LIGHT - Working width: 1,300 mm Hodpfovun Uyox Acuenu - Number of tubes from above: 1 pc. - Tubes positioned straight - Suitable for mercury tubes - Suitable for gallium tubes - Adjustable mirror - Total connected load: 14.61 kW - Location: in stock - Voltage, frequency: 400 V / 50 Hz

Sąlyga: naudotas, Gamybos metai: 2012, - Manufacturer: Venjakob - Year of manufacture: 2012 - Working width: 1,300 mm - Model: Flash-off dryer, VEN DRY Flash Off - Maximum part height: approx. 120 mm - Zone 1: Paint settling zone with cover hood, no air flow, 3,000 + 300 mm - Zone 2: Flash-off zone, 10,000 mm - Laminar flow dryer operating counter to workpiece travel - Supply air: 4,000 m³/h - Exhaust air: 4,000 m³/h - Air volumes adjustable via dampers - Heat output: approx. 65 kW - Air velocity: 2-5 m/s - Maximum drying temperature: 30°C - Heat exchanger, hot water (PWW) max. 90/70°C - Conveyor belt transport, length: 13,800 mm Hnjdpfsu Edhujx Acusu - Feed speed: approx. 2-10 m/min - Frequency inverter required on-site - Voltage, frequency: 400 V / 50 Hz - Motor power: 2.5 + 1.5 + 0.75 kW - Without control cabinet - Location: in stock, Blomberg

Sąlyga: naudotas, Gamybos metai: 1998, mašinos/transporto priemonės numeris: 71257/1, - Manufacturer: Cefla/Sorbini - Model: Ecolight - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 870 ± 20 mm - Max. workpiece height: approx. 70 mm - Number of tubes from above: 1 pc. - Tube orientation: straight, 1 pc. - Suitable for mercury lamps - Suitable for gallium lamps Hedpeumvp Eofx Acujnu - Rod conveyor - Rod pitch: approx. 95 mm - Feed speed adjustable: 5 - 25 m/min - Length: 1,500 mm + 500 mm - Voltage, frequency: 400 V / 50 Hz - Total electrical connection: 12.56 kW - Voltage fluctuations max.: ± 5%

Sąlyga: naudotas, Gamybos metai: 1997, mašinos/transporto priemonės numeris: 4406, 3D UV Dryer Superfici incl. Conveyor The machine is shown in the pictures in its unrestored condition. - Manufacturer: Superfici - Type: TU166-30 + 2 UVM55 - Year of manufacture: 1997 Hodpfxstz Dg Us Acuenu - Working width: 1300 mm - Number of tubes from above: 2 pcs. - Tubes arranged at an angle - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power: 80 W/cm - Step control: 80/40 W/cm - Feed rate adjustable via handwheel, approx. 2–7.5 m/min - Location: in stock - Voltage / frequency: 400 V / 50 Hz - Commodity code: 8419 3200

Sąlyga: naudotas, Gamybos metai: 2007, with photoelectric sensors in the infeed area, the dryer only activates when parts are detected by the sensor; otherwise, the dryer remains in energy-saving standby mode with the reflector halves almost closed. Operation via a Siemens control panel. - Manufacturer: Venjakob - Model: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1,300 mm - Max. part height: approx. 100 mm - Number of lamps: 2 units - Suitable for mercury and gallium lamps - 3D for edge drying - Maximum lamp power: 120 W/cm - Lamp power infinitely adjustable: 50–120 W/cm - With standby function - With conveyor - Feed rate: approx. 2.5 – 7.5 m/min - Length: 2,500 mm - Width: 2,750 mm Hnsdeu S N R Eepfx Acueu - Total connected load: approx. 45 kW - Location: in stock - Voltage/Hz: 400/50

Sąlyga: naudotas, Gamybos metai: 2008, - Manufacturer: Efsen/Cefla - Model: Woodcure 1400 - Year of manufacture: UV unit 2008, Conveyor/Transport system 1998 - Working width: 1,300 mm (1,445 mm) - Working height: 870 ± 20 mm - Maximum part height: 70 mm - Number of lamps from above: 2 pcs. - Lamps installed vertically: 2 pcs. Hsdpfjvupdcox Acusnu - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power: 120 W/cm - Rod conveyor - Rod pitch: 95 mm - Conveyor system manufacturer: Cefla - Feed speed adjustable via hand wheel: approx. 5–25 m/min - Width: 3,500 mm - Voltage/Frequency: 400 V / 50 Hz - Total electrical connection: 38 kW - Maximum voltage fluctuations: +/- 5%

Sąlyga: naudotas, for installation on an existing bar conveyor. Scope of delivery: Housing with 2 tubes, exhaust fan, and control cabinet. Transport not included. Hjdjumvqcjpfx Acusnu

Sąlyga: naudotas, Gamybos metai: 2008, - Manufacturer: Printworld - Model: PUVD 1600-2 - Year of manufacture: 2008 - Working width: 1,600 mm Hnodpfx Aoumvkcecueu - Working height: 1,030–1,050 mm - Max. workpiece height: 25 mm - Operating side: left - Number of top lamps: 2 pcs. - Suitable for mercury lamps - Suitable for gallium lamps - Lamp output: 120 W/cm - Step control: 60 / 90 / 120 W/cm - Mesh conveyor belt - Feed speed adjustable: 2–50 m/min - Installation length: 3,300 mm - Machine dimensions (L x W x H) in meters: 3.3 x 2.5 x 1.8 m - Location: in stock - Voltage, frequency: 400 V / 50 Hz

Sąlyga: naudotas, Gamybos metai: 2016, mašinos/transporto priemonės numeris: 9960-10-1059, Technical data: - Manufacturer: Printworld - Model: 3D - PUVD Hnjdeu Abn Topfx Acuou - Year of manufacture: 2016 - Working width: max. 1,300 mm - UV lamp length: 2 x 1,600 mm sheet length - Number of emitters: 2 top curing systems + 1 bottom curing system - UV power control: UV lamps individually adjustable (30% - 100%) - Reflector: Printworld Multifocal reflector - Conveyor belt transport width: 1,400 mm - Total length: 4.5 m - Conveyor belt speed: 3 – 20 m/min - Substrate clearance height: 60 mm max. (optionally higher) - Conveyor belt design: PTFE glass fiber fabric conveyor belt, antistatic coated - Conveyor speed control: stepless with digital control and monitoring - Conveyor belt drive: stepper motor with variable belt speed and digital control and monitoring - Energy saving: automatic standby mode with power reduction of approx. 10% - Operation/control: Schneider Modicon M258 logic controller processor with Magelis color touchscreen - Infeed height: 850 – 900 mm - Outfeed height: 850 – 900 mm - Electrical connection: 400V~, 50 Hz, 3-phase +N +PE - Current: 135A - Location: available from stock

Sąlyga: naudotas, Gamybos metai: 2008, Infrared dryer, consisting of: Module 1: - 3 pcs. IRM lamps with a power rating of 3,500 watts per lamp - Structure made of painted sheet metal - Installed electrical power: 10.5 kW Module 2: - 2 pcs. IRM lamps with a power rating of 3,500 watts per lamp - Structure made of painted sheet metal - Installed electrical power: 7.0 kW Total connected load approx. 19.5 kW / 400V / 50Hz Exhaust system: - Exhaust fan approx. 1,800 m³/h - Supply air/room air approx. 1,800 m³/h - Extraction nozzle D160 mm ROLLER CONVEYOR - Manufacturer: Celfa - Year of manufacture: 2008 - Steel rollers wrapped with heat protection tape - Roller pitch: 160 mm - Feed adjustment via handwheel - Installation length: 2,000 mm - Feed rate approx. 3 - 7.5 m/min - Incl. control cabinet Hjdpfewub Uxox Acuonu - 400V/50Hz