Dažymo robotai, dažytojai, pramoniniai robotai

FANUC P-250iA/15

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2008, The wrist is used and has been overhauled. There are 2 units available. Fodpfsihb Axox Afdsph

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, 5 AŠIŲ DAŽYMO ROBOTAS CMA MOD. ROBY 5EX-R - NAUDOTAS - 5 valdomos ašys - 3 laikikliai - Riešo keliamoji galia 3 kg - Programavimas automatiškai mokantis Karuselė * Svirčių skaičius: 3 * Vienos svirties keliamoji galia: 25 kg Fpodpfx Ajt U Ngasfdjh Detalės sukimasis * Servovarikliu valdomas ir sinchronizuotas judėjimas - Komplektuojamas su vadovu ir CE deklaracija RETROFIT 2024 (PILNA ATNAUJINIMAS)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2006, veikimo valandos: 39 475 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 80022, bendras svoris: 520 kg, keliamoji galia: 15 kg, rankos pasiekiamumas: 2 800 mm, pasukimo diapazonas: 320 °, valdiklių gamintojas: FANUC, valdiklio modelis: RJ3iC, teach pendant gamintojas: FANUC, valdymo spintos plotis: 800 mm, valdymo spintos aukštis: 1 360 mm, įėjimo įtampa: 400 V, įėjimo srovė: 20 A, įvesties srovės tipas: Oro kondicionierius, kartojimo tikslumas: 2 mm, This is a paint robot from Fanuc. It was previously used at BMW for clear coat application on luxury car bodies and, with its 40,000 operating hours, it has a considerable amount of working life behind it. The robots at BMW operated on a rail system, which is why the controller features a large additional amplifier. A second auxiliary amplifier is used for driving the shoulder-mounted motors for gear pumps; however, these motors are not installed. The rail motor would be connected directly to the robot. The cable length between the robot and the controller is 10m and features plug-in connections at the controller—this is also a notable feature. Fjdpfx Afotu H Hcodoph We can assist with transportation and installation. The robot, together with its controller, is fixed transport-ready on a special pallet measuring 2500x800x1600mm. It is currently configured as a left-arm, left-handed version. It is equipped with line tracking. However, this configuration can easily be changed without mechanical modifications. The unit is still at our customer’s site but can be demonstrated under power at Paintrobotics for serious inquiries. We have two units available. For demonstration, we would transport the robot from Frankfurt to our facility.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2007, veikimo valandos: 92 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 82351, bendras svoris: 520 kg, keliamoji galia: 15 kg, rankos pasiekiamumas: 2 800 mm, pasukimo diapazonas: 320 °, valdiklių gamintojas: FANUC, valdiklio modelis: RJ3iC, teach pendant gamintojas: FANUC, valdymo spintos plotis: 800 mm, valdymo spintos aukštis: 1 360 mm, įėjimo įtampa: 400 V, įėjimo srovė: 20 A, įvesties srovės tipas: Oro kondicionierius, kartojimo tikslumas: 2 mm, This is a paint robot from Fanuc. It comes with a very special configuration. Originally, it was intended as a replacement robot at BMW for clear coat application on luxury car bodies. The robot was never used and is therefore in like-new condition. At BMW, these robots operated on a rail. For this reason, the controller is equipped with a large additional amplifier. The corresponding motor is included and can simply be connected directly to the robot itself, allowing for direct mounting onto the carriage. Another notable feature of this robot is the built-in motor in the shoulder, which is used to control a gear pump. This allows for precise dosing on the robot without issue. The cable length between the robot and controller is 2x10m and is pluggable at the controller. This means you have 10 m of cable, e.g. routed through a drag chain from the rail, and then another 10 m, also pluggable, to the controller. This is another special feature. Fpjdpfxotu H Avo Afdjh We provide a 1-year commissioning warranty. We can assist with transport and installation. The robot is mounted together with the controller, transport-ready, on a special pallet measuring 2500x800x1600mm. Currently, it is configured as a right-arm, right-handed unit, but this can be easily changed without any mechanical modifications. The unit is still located at our customer’s site, but can be viewed under power at Paintrobotics, given serious interest. For this, we would arrange to transport the unit from Frankfurt to our facility.

Gamybos metai: 1998, būklė: labai geros būklės (naudotas), I am selling the following window manufacturing set: - 1 unit Mortise and Tenon Machine Weinig Unitec 10. - 1 unit Profile Shaping Center Weinig Univar 10. Year of manufacture: 1998. Milling heads from OERTLI. Available immediately. Price for the complete set: €17,000. Condition: very good! Fsdpfxofzzhye Afdoph

Būklė: nepatikrintas (naudotas), Slotting spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window machining center ----- For sale on behalf of customer Manufacturer’s description: Designed for the production of individual parts, components, and small series. Spindle arrangement: One crosscut saw, a single tenoning and slotting spindle, a right-hand profiling spindle, a tenoning/slotting spindle, and a profiling spindle suitable for stacking multiple tools on top of each other, with pneumatic spindle movement. Slot table with motorized table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit. Height adjustment of the feed by manual control. Workpiece clamping via 2 pneumatic clamping cylinders. Fedjx Tu N Hepfx Afdoph Length stop with scale and magnifier for precise frame or sash external dimensions. Control of tool positions (longitudinal and cross machining) via selector switch on the operator panel. Technical data ----- Crosscut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Maximum tool diameter: 350 mm Motor: 3 kW Tenoning and slotting spindle ----- Number of tools: 3/4 pcs. for timber thicknesses IV 68 – IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thicknesses IV 68 – IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 232 mm Motor: 11 kW Special equipment: Synchronised spindle ----- Pneumatically actuated forward/backward motion for tear-free profiling of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, tool min. diameter: 112–140 mm, max. tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for synchronised spindle from 4 kW to 7.5 kW Screen control for 99 window types. 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production possibilities: single pieces, double pieces, by frame, series production, profiling. Data input via keyboard with integrated user guidance and error diagnostics. 1 Groove spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Mounting length: 13 mm Clamping length: 40 mm Axial stroke: 2 positions Radial stroke: 2 positions Max. tool diameter: 130 mm Motor upgrade for groove spindle from 2.2 to 3 kW 1 hardware recessing unit, right: ----- For routing the hardware groove during profiling or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the operator panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting circle: min. 140 mm, max. 180 mm Home position below table: 10 mm Hardware router in special design: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial stroke, 2 positions Motor upgrade for hardware routing spindle from 2.2 to 3 kW Hardware routing spindle for 230 mm tool diameter in and above table Electrical height adjustment of the feed with selector switch on the operator panel for 2 timber dimensions, includ...

Būklė: labai geros būklės (naudotas), Motor-driven NC rotary table Stepless rotary table (increment 0.001°) Integrated pallet station: pallet changer table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Overall height: 660 mm Centering bore: 100 H6 mm T-slots: 7 units Slot dimensions: 22 H7 mm Slot spacing: 160 mm Position measurement via ROD 250 rotary encoder. Condition: Very good (used) Optional: with machine base (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, as well as CNC control upgrades. Services: - Used machines - Spare parts - Customer service Fpjdpfxofk R Tdo Afdeh - Machine servicing - Machine overhauls - Control system upgrades

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, ilgio ribotuvas: 3 200 mm, įrankio skersmuo: 400 mm, ašies skersmuo: 50 mm, spindelio eiga: 640 mm, veleno greitis (maks.): 3 000 aps./min, frezos veleno ilgis: 320 mm, pjūklo disko skersmuo: 400 mm, aukščio reguliavimo tipas: elektrinis, įvesties srovės tipas: Oro kondicionierius, darbinio aukščio: 130 mm, darbinis plotis: 200 mm, SCM Windor 60/100 – Angular Machining Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System This production line is a window and door manufacturing system of the Windor 60/100 type by SCM Group, year 2005. It is a CNC-controlled angular machining centre designed for the industrial processing of frame and sash components. The system is built for serial production and enables precise, repeatable machining in integrated process steps. 2. Main Components of the System 2.1 SCM Windor 60/100 Angular Machining Centre The SCM Windor 60/100 features a modular build and is designed as an angular processing line. Machining is carried out on a tenoning side and a profiling side arranged at right angles to each other. Multiple machining steps such as milling, drilling, grooving, rebating, and tenoning are executed in a seamless CNC-controlled process. Key Features: * CNC multi-sided processing * Multiple milling and machining spindles * Automated tool guidance and tool change Fjdsx Nqqxspfx Afdsph * High dimensional and repeat accuracy 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the system and is used for precise drilling operations for joints and fittings. The drilling is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profiling milling operations and consists of two processing sides: Right Side: * Lifting spindle with adjustable height * For variable profile and contour machining Left Side: * 24-position tool changer * Automatic tool change to minimise set-up times * Suitable for complex profile milling 2.4 Löwer Surface Grinding Machine A surface grinding machine from Löwer is integrated into the line. This machine is exclusively used for surface grinding to improve the surface quality of the machined parts. 3. Control, Operation and Safety The system is equipped with CNC control managing all machining processes, tool changes, and feed and spindle movements. Operation is semi- or fully-automated by trained personnel. The safety features are compliant with the state of the art at the time of construction (2005) and include in particular: * Mechanical safety guards and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Extension: SCM Topset XL 10-Spindle Planer An extension of the existing machine park is planned with the installation of an SCM Topset XL 10-spindle planer. The machine operates as a standalone work station at a separate location within the production hall and is not directly connected to the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transport are to be organised by the buyer. Available from: 07.01.2026

Gamybos metai: 1995, būklė: labai geros būklės (naudotas),

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Variklių skaičius: 1 vnt. Darbinis ilgis: 2500 mm Valdymas: nėra Vientisinė stiklo tašų pjovimo staklė Hecht ES 350 ----- Pasukimas pneumatinis, į fiksatorius. 45º/90º/135º Pneumatinis pjūklo disko pastūma Pneumatinis pasukimas per rankinį fiksatorių Su staklių pagrindu, pneumatinis prispaudimas Pjūklo diskas HM 350 x 3,0/2,2/30 Z 100 Pjovimo stovo matmenys: ilgis 700 mm, plotis 1 600 mm, aukštis 1 500 mm Jutiklinis ribotuvas 1,5 m Atrama 1,5 m su laikikliu Jutiklinis ribotuvas 3 m Atramos prailginimas nuo 1,5 m iki 3 m su laikikliu Stalo įdėklai su grioveliais įleistoms stiklo tašoms Fpsdovpr N Rspfx Afdjh HECHT ASB rankinis ilgio ribotuvas su skaitmeniniu ekranu, 2500 mm Su ištraukimo įrenginiu (Techniniai duomenys pagal gamintoją, be garantijos!)