Selektyvinė konforminio dengimo purškimo įranga
ICT PCBA Conformal Coating Machine

Gamybos metai

2025

Būklė

Naujas

Vieta

Veenendaal Nyderlandai

Selektyvinė konforminio dengimo purškimo įranga ICT PCBA Conformal Coating Machine

Rodyti žemėlapį

Duomenys apie mašiną

Mašinos pavadinimas:: Selektyvinė konforminio dengimo purškimo įranga

Gamintojas:: ICT

modelis:: PCBA Conformal Coating Machine

Gamybos metai:: 2025

Būklė:: naujas

Kaina ir vieta

Vieta:: De Schutterij 15, 3905 PJ Veenendaal, Nederland

Skambinti

Pasiūlymo informacija

Skelbimo ID:: A21081382

Atnaujinimas:: paskutinį kartą atnaujinta 27.01.2026

aprašymas

A conformal coating machine is an industrial device used in electronics manufacturing to automatically apply a protective conformal coating to printed circuit boards (PCBs). This coating shields sensitive electronics from external factors such as moisture, dust, chemicals, corrosion, and temperature fluctuations.

The machine applies a thin, uniform protective layer to selected areas of the PCB. This process is fully automated and repeatable, which is crucial for quality and reliability in series production.

Transport system
Transfers the PCBs through the machine (inline or stand-alone).

Coating application
Depending on the configuration:

- Spray coating (selective or full)
- Jet coating
- Film or atomization technique

Gtedpoydnlhefx Ab Ssw
XYZ positioning and motion system
Ensures precise control of the spray valve.

Vision and camera system (optional)
For alignment, inspection, and process control.

Masking / Selective coating
Protects connectors, test points, and other zones that should not be coated.

Drying or curing module
For UV, thermal, or air curing, depending on the coating material.

Control software
Programmable for different PCB designs and recipes.

Suitable coatings

- Acrylic
- Polyurethane
- Silicone
- Epoxy
- UV-curable coatings

Applications
ICT conformal coating machines are widely used in:

- Automotive electronics
- Industrial controls
- Medical equipment
- Aerospace
- Consumer electronics

Benefits

- Consistent and high coating quality
- Reduced material waste
- High repeatability
- Suitable for mass production
- Improved reliability and service life of electronics

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.

Dokumentai

21081382-01.pdf

Tiekėjas

Registruotas nuo: 2013

9 Skelbimai internetu

Skambinti

Siųsti užklausą

Žinutė*

Pavadinimas*

El. paštas*

Telefonas

Įmonė

Pašto kodas ir vietovėžemė

Esu prekybininkas

Gaukite pasiūlymus dėl panašių mašinų

Pastaba: Jūsų užklausa bus perduota visiems šios mašinų kategorijos pardavėjams. Dėl to galite gauti labai daug pasiūlymų.

Privatumo pareiškimas

Telefonas & Faksas

+31 318 5... skelbimai

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Ultragarsinis valymas vakuuminiu slėgiu. IFP-Metalclean NEW-KP 50 HMA

St. Gallen

1 319 km

Ultragarsinis valymas vakuuminiu slėgiu.
IFP-MetalcleanNEW-KP 50 HMA

Skambinti

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, This degreasing system operates under vacuum (pressure swing process) using modified alcohol or hydrocarbon solvents. (New equipment) 12-month warranty Immediately available from St. Gallen Gtjdsqy H H Depfx Ab Sow Features vacuum-pressure swing technology Process steps: spray, immersion, ultrasonic, and vapor degreasing, including vacuum drying. Specifications: Ultrasonic: 2 x 1000 W – 25 kHz Double fine filter Chamber door made of armored glass 2-tank system, total capacity 400 L Double distillation with residual distillation Automatic oil discharge 3-stage water separation Electropolished chamber for ultra-fine cleaning Screw-type vacuum pump (latest generation) Loading trolley 2 washing baskets, mesh width 7 mm and 12 mm 12" touch panel interface Prepared for automatic loading Maximum basket dimensions (480 x 320 x 200 h mm) Maximum load capacity: 100 kg System dimensions: 2400 x 2400 x 3300 h mm System weight (basic configuration): 2500 kg Color scheme: RAL 9003 (white) RAL 7021 (black)

Peržiūrėti detales

Mažas skelbimas

Ultragarsinė valymo sistema Glogar ULTRA 200

Linz-Land

1 011 km

Ultragarsinė valymo sistema
GlogarULTRA 200

Skambinti

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Ultrasonic Cleaning System ULTRA200 Usable platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. loading weight: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Manufactured entirely from stainless steel Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control unit: Manufacturer Fatek, HMI from Weintek Electrical connected load: 10.55 kW Includes: - Automatic pneumatic goods lift - Surface rinsing/oil separator for bath maintenance - Ultrasonic submersible transducers with dual side sonication - Power: 2,000 W effective / 4,000 W peak – Multi-frequency: 20 kHz / 40 kHz Gtedpfsv U A Izsx Ab Sow - Manual blow-off gun Demonstration unit from the Glogar Technology Center, available immediately

Peržiūrėti detales

Mažas skelbimas

Purškiamoji valymo sistema - Toploader Glogar L122

Linz-Land

1 011 km

Purškiamoji valymo sistema - Toploader
GlogarL122

Skambinti

Gamybos metai: 2025, būklė: naujas, Parts cleaning machine, spray cleaning system type L122 Fully automatic hot water chamber washing machine with basket drive via geared motor, housing made of stainless steel 1.4301. - 2 pieces of three-sided stainless steel spray systems with stainless steel flat spray nozzles - 2 pieces of stainless steel washing pumps (manufactured by Xylem/Lowara) - Level control as dry-run protection - 2 suction filters as pump protection Gtedpfehl Ic Rex Ab Sjw - Oil skimmer for bath maintenance - Basket diameter: 1,150 mm - Usable height: 700 mm - Max. load weight: 300 kg - Spray pressure: 2 x 3 bar - Tank volume: 270 liters - Heating: electrically adjustable (ambient temperature - 60°C) - Electrical connection load: approx. 11.5 kW - Machine dimensions (W x D x H): 1,480 x 1,540 x 2,195 (h) mm

Peržiūrėti detales

Mažas skelbimas

Valymo sistema - purškiamo valymo sistema Metalclean LT 100 Spritzreinigung

Austrija

1 306 km

Valymo sistema - purškiamo valymo sistema
Metalclean LT 100Spritzreinigung

Skambinti

Gamybos metai: 2024, būklė: beveik kaip naujas (parodų įrenginys), - Usable internal dimensions: D=970mm H=540mm (other sizes available on request) - Touch screen - Spray pressure: 3 bar - Basket load: 200 kg - Tank volume: 210 L - Standard accessories: • Oil skimmer • Frame, lid, and housing made of stainless steel • Time-controlled electric steam extraction • Reinforced stainless steel basket • Stainless steel electric pump • Stainless steel filter on the pump suction side • Stainless steel heating elements • Mechanical basket rotation with geared motor Gtedpfx Aof A Nq Uob Sew • Electrical system IP65, control via PLC (DGT V4) • Automatic water supply • Safety limit switch monitors lid opening • Stainless steel spray nozzles • Weekly timer for heater and oil separator • Operating hours counter

Peržiūrėti detales

Mažas skelbimas

Tallinn

476 km

Įdėjimo mašina / P&P
YAMAHAYSM20-2

Skambinti

Mažas skelbimas

3D AOI aparatas Viscom S3088 Ultra chrome

Veenendaal

1 256 km

3D AOI aparatas
ViscomS3088 Ultra chrome

Skambinti

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Extreem snelle en nauwkeurige inspectie voor grootschalige productie Z-resolutie: 0,5 µm Z-bereik: tot 30 mm (1,2") Schuine camera’s Aantal megapixelcamera’s: 8 Orthogonale camera Resolutie: 10 µm Beeldveld: 50 mm x 50 mm (2" x 2") Inspectiesnelheid: tot 65 cm²/s Software Gebruikersinterface: Viscom vVision/EasyPro SPC: Viscom SPC (statistische procescontrole), open interface (optioneel) Verificatiestation: Viscom vVerify/HARAN Godpfx Abewkfuue Sstw Remote diagnose: Viscom SRC (software remote control) (optioneel) Programmeerstation: Viscom PST34 (optioneel) Systeemcomputer Besturingssysteem: Windows® Processor: Intel® Core™ i7 Printplaatverwerking PCB-afmetingen: 508 mm x 508 mm (20" x 20") Transporteerhoogte: 850 - 950 mm ± 20 mm (33,5" - 37,4" ± 0,8") Breedte-instelling: automatisch Transporttype: enkele baan PCB-klemmen: pneumatisch Bovenste doorvoerhoogte: 50 mm (2") Onderste doorvoerhoogte: 45 mm (1,8"), tot 85 mm (3,3") optioneel; 40 mm (1,6") met PCB-ondersteuning Overige systeemgegevens Positioneer-/handeleenheid: synchrone lineaire motoren Interfaces: SMEMA Stroomvoorziening: 400 V (andere spanningen op aanvraag), 3P/N/PE, 8 A, 4 - 6 bar werkdruk Systeemafmetingen: 994 mm x 1565 mm x 1349 mm (39,1" x 61,6" x 53,1") (B x H x D) Gewicht: 720 kg (1587 lbs)

Peržiūrėti detales

Mažas skelbimas

Ultragarsinė valymo sistema Ultraschallreinigungsanlage BR-80 BR-80-M

St. Gallen

1 319 km

Ultragarsinė valymo sistema
Ultraschallreinigungsanlage BR-80BR-80-M

6 600 €

Fiksuota kaina plius PVM

Skambinti

Būklė: naujas, Gamybos metai: 2025, Manual operation featuring our ultrasonic cleaning technology, analog control panel, and temperature regulation via digital thermostat. PRO-series features can be added as options. We offer capacities ranging from 60 to 7,500 L to meet all requirements. Gtsdpsf Hqavofx Ab Sew Tank capacity: 110L External dimensions: 1970x670x970mm Usable rack dimensions: 550x350x250mm Ultrasonic frequency: 40kHz Ultrasonic power: 1000W

Peržiūrėti detales

Mažas skelbimas

ERSA banginio litavimo sistema "Powerflow N2 ERSA Powerflow N2

Stolberg

1 275 km

ERSA banginio litavimo sistema "Powerflow N2
ERSAPowerflow N2

Skambinti

Mažas skelbimas

Valymo sistema HD praustuvas 80BAR Metalclean Hochdruck Waschtisch 80BAR Waschtisch 3X / automower

St. Gallen

1 319 km

Valymo sistema HD praustuvas 80BAR
Metalclean Hochdruck Waschtisch 80BARWaschtisch 3X / automower

Skambinti

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), IMMEDIATELY AVAILABLE!!!! Manual cleaning is performed using special gloves in the front working area. The effectiveness of the cleaning process is ensured by a high-pressure pump and a specialized spray nozzle. The cleaning fluid temperature can be set up to 60°C in these units. The pressure is adjustable from 1 to 80 bar. Gtodpof A D Nmsfx Ab Ssw Technical Data: Working surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg (optionally up to 150 kg) Spray pressure: adjustable from 1 to 80 bar Tank volume: 75 litres / Heating power: 2 kW Standard configuration: • Blow-off gun in the work chamber • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel covers above the tank • Upward-opening lid with two access ports and gloves • Hardened glass viewing window • Door opening/closing system with gas strut assistance • Door opening monitored by safety limit switch • Filter on the pump intake side (500 micron) • Foot switch for activating cleaning pump • Internal lighting • Neoprene gloves, L 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Stainless steel cartridge filter with pump (10/25/50 micron) • External mini pneumatic oil separator

Peržiūrėti detales

Mažas skelbimas

Purškiamas valymo mašina EVEREST SprayClean Serie

Dietzenbach

1 166 km

Purškiamas valymo mašina
EVERESTSprayClean Serie

Skambinti

Būklė: naujas, SprayClean spray cleaning machines Gsdpjd Hbp Eofx Ab Sotw SprayClean systems are front-loading machines equipped with a pneumatically operated front door. Everest SprayClean machines are engineered for the efficient cleaning of industrial components using hot high-pressure water and biodegradable detergents. SprayClean models feature full thermal insulation of the liquid tanks, steam extraction, pneumatic front doors, and a motorized basket system as standard. These models can also be configured to include rinsing and drying processes to meet customer requirements. Multi-stage systems are PLC-controlled. Optional accessories include oil skimmers, oil separator units, filtration units, dosing pumps, loading trolleys, and cabin insulation, among others. Rotary washing system as a front-loader; cleaning is performed by high-pressure spraying with hot water. Machines are available in various sizes with basket diameters from 900 to 1800 mm, load capacities from 300 to 800 kg, and loading heights from 500 to 900 mm. Depending on the model: washing, washing & rinsing, or washing, rinsing & drying processes are possible in a single unit. Special requests can be accommodated. We would be pleased to provide you with a detailed quotation.

Peržiūrėti detales

Reklamuokite čia