Lapošų briaunų pašalinimo staklės pirkti naudotą (96)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2017, veikimo valandos: 3 862 h, Funkcionalumas: visiškai funkcionalus, Used machine Year of manufacture: 2017 General Specifications: Max. working width of sanding belt unit: 1350 mm Sanding belt dimensions (W x L): 1380 x 1900 mm Outer brush diameter: 350 mm Table opening: 0 – 100 mm Min. part size: 50 x 50 mm Hedpfx Adew Dzyte Dspa Speed Feed speed, frequency-controlled: 0.5 - 8 m/min Electricity 1st unit – W – sanding belt: 11 kW 2nd unit – RB - rotary brush unit: 1.5 kW Brushes: 4 x 1.5 kW (6 kW) Feed motor, frequency-controlled: 2.6 kW Vacuum pump: 15 kW Electric connections: 400 Volt Frequency: 50 Hz Compressed air only for sanding belt unit Required air pressure: 6 bar Consumption: 160 l/min Dust extraction at 100 mm static pressure Sanding belt unit: 2000 m3/h Vacuum pump: 1500 m3/h Weight: approx. 6000 kg Includes one set of brushes and a starter set of sanding belts. New extraction system available as an option. The machine has been technically overhauled (Transport carpet and bearings are new, value approx. €20,000) Immediately available

Sąlyga: naudotas, Gamybos metai: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Fully Automatic Wet Deburring Machine for Sheet Metal Model EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Serial No. 780063 _____ Hsdst Hw Iijpfx Ad Djpa Grinding width approx. 1,380 mm Roller width: 1,400 mm Max. workpiece height: 1 – 70 mm Continuously variable feed speed: approx. 1.5 – 8 m/min Comprises 5 processing units: Oscillating sanding roller for abrasive cloth or non-woven abrasives Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, for laminated or non-woven abrasive flaps, adjustable for wear. Brush roller unit for two rollers with Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, ideal for removing oxide layers. Wet grinding unit with integrated band filter system and closed water circuit, installed under the conveyor belt and easily retractable from the machine. Washing and drying system, designed for a minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece transport takes place frontally via a continuous conveyor belt (min. part length 350 mm) with vacuum suction system (300 mm width on the right) and a magnetic track with a width of 300 mm, to hold small parts as short as 80 mm. Frequency converter for stepless speed control of the abrasive flap brushes from 250 – 1000 RPM (position 2, top), also for conveyor belt feed. Control panel with clear operation and digital roller position display, 4 ammeters for monitoring roller drives, indicator LEDs. Quick-change mechanism for sideways removal of the abrasive flap brushes plus various spare rollers with non-woven abrasives and brush inserts. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition : good to very good Delivery : ex stock – as inspected Payment : strictly net – after receipt of invoice

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 500 mm, maks. lakšto storis: 102 mm, bendras ilgis: 1 300 mm, bendras plotis: 3 100 mm, bendras aukštis: 2 600 mm, bendras svoris: 2 600 kg, praėjimo plotis: 1 500 mm, ruošinio aukštis (maks.): 102 mm, One machine for everything: removing slag, burrs, and oxide Reliable and clean slag removal with slag hammer brushes EdgeRacer the Grinder effortlessly removes slag formed on the underside during plasma or oxy-fuel cutting. The disc brushes are adjusted to almost touch the underside, allowing the steel pins to hammer off the slag. Hedpfx Aewzybked Djpa Powerful deburring and precise edge rounding EdgeRacer® the Grinder easily removes stubborn punching burrs and laser beads/splatter. You can also adjust the brush feed to define the level of edge rounding required. Deburring and edge rounding of thin sheets and 3D workpieces Deburr thin sheets or sheets with cutouts. The grinding brushes can be positioned below the transport level, ensuring the entire workpiece edge is processed. The oxide-disc allows for removal of oxide layers from both inner and outer contours. Full working width or double performance – optimally adjusted to your requirements Depending on the width of the parts to be processed, you can select between two processing modes. Choose single-row operation to fully utilize the working width, whether for wide parts or for parallel loading. To optimize tool wear, the brushes automatically change their positions. For narrower workpieces, select double-row operation for dual processing in a single pass.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 350 mm, Grinding and deburring machine COSTA MD5 CVC 1350 Grinding, deburring, edge rounding, and finishing of series components Year of manufacture: 2021 Control system: Costa Operating hours: rarely used Technical Specifications: Free-standing machine Working height: variably adjustable from 0.5 mm to 150 mm Working width: 1350 mm Maximum part weight: 400 kg Hodswq Dnmspfx Ad Dspa Belt length: 2620 mm Constant table height, infeed via sanding units Intuitive PLC control for creating, saving, and retrieving programs Electromechanically positionable grinding units in steps of 0.01 mm Accessories: - Extraction system: Wet separator extraction unit W 4000

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: G2372-13, darbinis plotis: 900 mm, darbinio aukščio: 1 190 mm, šlifavimo juostos ilgis: 1 900 mm, šlifavimo juostos plotis: 930 mm, The machine was only used a few times and has just 10 operating hours! Hpsdpfewa Ubcox Ad Dea TECHNICAL DATA Application area: precision grinding, material removal and calibration of workpieces Working width: 900 mm Abrasive belt dimensions: 930 × 1,900 mm Table opening: 1 – 125 mm Increased table opening: up to 250 mm Constant working height: 1,190 mm Speed and Feed Aggregate speed: 11 and 22 m/s Feed speed, frequency controlled: 4 – 11 m/min MACHINE DETAILS Machine weight: 2,100 kg Grinding Equipment Abrasive belt units: 2 Motor: two-speed motor Contact roller height adjustment: hand wheel for correcting pressure or belt thickness Height adjustment display: electronic digital display of feed table height in mm Motor for contact roller unit: for finishing grinding Voltage: 400 V Phases: 3 Frequency: 50 Hz Total current: 62 A Power: 31.68 kW EQUIPMENT - 2 abrasive belts - Rubber-coated steel rollers - Extraction system

Sąlyga: naujas, Aceti Edge Bevelling Machine Model 61 A stable, robust edge bevelling machine for milling visible and weld edges. Bevel adjustment via hand wheel and scale. Table hardened, with a clamping length of 500 mm. Axial adjustment of the milling table allows full utilisation of the ISO/DIN indexable inserts. Suitable for all materials, including plastics, through the use of various indexable inserts. Standard accessories: Hsdpfx Adjiwxwtj Depa - Milling head fully equipped with 10 ISO indexable inserts - Hardened, axially adjustable guides - Bevel adjustment via hand wheel with locking facility - Angle adjustment by means of circular guide 15–45° - Table design with 4 rubber feet Technical Data: Motor: 400V, 1.1 kW Speed: 2800 rpm Milling table: 500 x 100 mm Cutter: 80 mm Bevel: 0 – 6 mm Angle: 15 – 45° Weight: 35 kg Incl. 10 pcs. indexable inserts SPUN 1203

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, - 1 set of cleaning tools included with the machine - 3-phase power supply - 5-pin electrical plug - Includes transport and storage cart Hjdpfswpulaex Ad Depa The support bar cleaner from BMZ ensures increased longevity of the support bars through repeated cleaning. It cleans quickly and easily, without the need to remove the bars for servicing, saving valuable time! Cleaning a complete standard-sized pallet (1500 x 3000 mm) takes approximately 30 minutes. On laser cutting machines equipped with a pallet changer, users can even clean the bars while cutting is in progress. The BMZ Pro Cleaner removes even heavily contaminated bars from slag and automatically adjusts to varying slag thicknesses up to 25 mm. It is also suitable for removing stubborn stainless steel slag. Regular cleaning increases process reliability and the quality of the produced parts.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: E07J 1021, darbinis plotis: 1 000 mm, plieno lakšto storis (maks.): 120 mm, bendras svoris: 3 790 kg, praėjimo plotis: 1 000 mm, galia: 45 kW (61,18 AG), įėjimo srovė: 98 A, Įranga: dokumentacija / vadovas, Ideal for construction companies seeking to combine efficiency with high-quality finishing The LISSMAC XL1000 G2S2 is a powerful deburring machine, specifically suitable for construction companies working with sheet material. This fully refurbished machine (formerly known as the GS1000) deburrs and rounds both the top and bottom edges of the sheet in a single pass—ideal for steel construction, component manufacturing, and post-processing lines. Advantages: * Double-sided deburring and rounding in one pass * Reduces manual rework and saves valuable time * Ensures safe, smoothly rounded edges and prevents coating chipping * Fully mechanically and electrically overhauled * Includes industrial extraction system * Ready for immediate use with on-site installation and user training Hsdpjwaylgsfx Ad Dspa Refurbishment Report: A complete refurbishment report is available and can be supplied upon purchase. Testing Possibilities: The machine can be fully tested in operation at our facility. Visits by appointment only. Price and Delivery: €47,500,- EXW Including extraction system Including long infeed and outfeed conveyor Excluding transport Including installation and user training on-site (within the Netherlands) This machine delivers maximum productivity and reliability for any construction environment. Contact us for more information or to arrange a demonstration at our facility.

Sąlyga: naudotas, Gamybos metai: 2016, veikimo valandos: 851 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MN25724, darbinis plotis: 1 500 mm, X ašies padavimo greitis: 4 m/min, įvesties srovės tipas: trifazis, maks. lakšto storis: 50 mm, bendras ilgis: 1 300 mm, bendras plotis: 2 600 mm, bendras aukštis: 2 500 mm, bendras svoris: 2 600 kg, darbinio aukščio: 950 mm, ruošinio aukštis (maks.): 50 mm, ruošinio plotis (maks.): 1 500 mm, The ER 1500 E is a top-side, single-sided deburring machine equipped with the EdgeRacer carousel for precise processing of interior and exterior contours with user-defined edge rounding. The EdgeRacer ER 1500 E offers a high throughput rate of over 300 m²/h, gentle surface processing—even for polished, brushed, and foil-coated sheets—and reproducible results. Thanks to the roller conveyor of the EdgeRacer ER 1500 E, the grinding heads can also be adjusted below roller table level. The roller conveyor ensures maximum energy efficiency, with processing costs typically less than €0.01 per square meter of sheet metal processed. Thanks to the reversing operation, sheets to be processed can be inserted and removed from the infeed side. Acquire the EdgeRacer deburring machine ER 1500 E as a demonstration unit with only 851 operating hours directly from the manufacturer. Hedpfx Asucw Dzed Dopa

Sąlyga: naujas, Gamybos metai: 2025, bendras ilgis: 1 450 mm, bendras plotis: 800 mm, bendras aukštis: 1 800 mm, bendras svoris: 500 kg, galia: 4,75 kW (6,46 AG), FC 120 ZK Working capacity Ø 120x120 mm, Hpsdst D D Nzepfx Ad Doa Number of belt stations (Z): 1, Number of brush stations (K): 1, Abrasive belt dimensions: 120x1850 mm, Brush belt dimensions: 120xØ200 mm, Abrasive belt speed: 20 m/s, Brush belt speed: 15 m/s, Feed speed: 12 m/min, Abrasive belt motor per head (x1): 3 kW, Brush motor per head (x1): 1.5 kW, Feed motor: 0.25 kW, Total power: 4.75 kW, Power consumption: 12A, Dust extraction port per head Ø (2x): 80 mm, Dimensions: 1450x800x1800 mm, Weight: 500 kg

Sąlyga: naudotas, Gamybos metai: 2019, veikimo valandos: 2 120 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SN026032, The machine was used in our own production facility, located in Bad Wurzach. Equipment: Tooling | Tool Wear Compensation | Camera Set. Offered as a package with 2 conveyor belts and a WDE 3002 wet extraction unit. Further information available upon request. The SBM-XL S2B2 grinding and deburring machine is designed for simultaneous double-sided edge rounding and oxide layer removal on steel and stainless steel parts. The LISSMAC system is suitable for processing laser-cut parts. Technical Data SBM-XL S2B2: Hpedpjt Tx Dxsfx Ad Doa - Pass-through width: max. 1500 mm - Processable sheet thickness: 0.5 - 50 mm - Load capacity: 300 kg/m - Voltage: 400 V / 50 Hz - Power system: 3~ PEN / 3~ PE+N - Rated current: 74.3 A - Rated power: 33 kW - Protection class: IP 42 - Infinitely variable feed: 0 - 4 m/min - Sheet thickness adjustment: electric - Tool adjustment: electric - Weight: approx. 4200 kg - Dimensions (W/D/H): approx. 3600/2100/2000 mm

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2316-01, darbinis plotis: 600 mm, Тип 41 Серия 600 WRD Работна ширина 600 мм Hpodpfx Adsr Nbpbs Dea Идеална машина за премахване на заусенъци и финиширане на метални изделия. Оборудвана с шлифовъчна лента и диск/четков агрегат.

Sąlyga: naujas, Gamybos metai: 2023, bendras ilgis: 13 000 mm, bendras plotis: 8 000 mm, bendras aukštis: 17 000 mm, ruošinio svoris (maks.): 500 kg, bendras svoris: 600 kg, BMZ Manual Hand Deburring Machine BMZ M1 The BMZ-M1, thanks to its vacuum table, allows for easy manual deburring of multiple parts at the same time. The system can be equipped with two different brushes, and changing the brushes is very quick and easy. The brushes can be installed on the system simultaneously, and swapping between them is fast and simple. Since the brush is arranged parallel to the table, it enables more uniform grinding. The system’s motor weight is balanced, making it ergonomic for the operator. Achieve maximum quality at a minimal price with the BMZ M1. Applications Hpedorp Dp Njpfx Ad Dea Edge rounding Deburring Slag removal Oxide layer removal Polishing

Gamybos metai: 2023, Sąlyga: beveik kaip naujas (parodų įrenginys), - Demonstration machine in as-new condition - 180° swivel head for rounding and deburring - Ergonomic operation - Uniform edge rounding - Suitable for processing small parts - Anti-slip mat Hjdpfx Adsflvc Ho Dspa

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 500 mm, X ašies padavimo greitis: 4 m/min, įvesties srovės tipas: trifazis, maks. lakšto storis: 102 mm, bendras ilgis: 2 300 mm, bendras plotis: 2 600 mm, bendras aukštis: 2 500 mm, bendras svoris: 4 000 kg, darbinio aukščio: 950 mm, ruošinio ilgis (maks.): 102 mm, Double-sided deburring in just one pass—naturally with 100% reproducible results and precise processing of both inner and outer edges—this is what only the EdgeRacer 1500 D offers you. Hpjdpsucw Rbjfx Ad Dsa The EdgeRacer 1500 D, which deburrs on both sides, is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with ribs, notches, threaded holes, and similar features. The maximum workpiece height is 102 mm. The brush units, operating from above and below, can be adjusted independently. Thanks to roller conveyor transport, the infeed can occur either below or above conveyor level.

Sąlyga: naujas, Timesavers Series 12 WW Hodpfx Adjwqf U Us Dopa The machine is equipped with two abrasive belt stations, allowing you to use Station 1 for preliminary grinding to remove protruding burrs and splashes, and Station 2 to achieve a surface finish on the part. The conveyor belt speed is infinitely variable. The table opening can be adjusted from 0.8 to 100 mm.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2019, 2 sanding units with inverter pre-arrangement for 3rd unit vacuum table working width 950 mm Hodpfswqrtqsx Ad Depa

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 060 mm, Multiple operations in one pass: deburring, edge rounding, oxide removal, removal of metal slag ... Abrasive belt unit (K) TopBrush unit (4PTB) Working width: 1060 mm Hpjdpfor Iydgox Ad Dea High feed rate: edge rounding at 4 m/min User-friendly control via touchscreen. Ex-showroom machine!

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 300 mm, garantijos trukmė: 12 mėnesiai, ruošinio plotis (maks.): 1 300 mm, RWT Deburring Machine – Possible Configuration Four-Station Machine: 1. Deburring with contact roller sanding belt 2. Cup brush for oxide layer or slag removal 3. Cup brush for edge rounding 4. Finish grinding with contact roller The BSM series machines can be equipped with the following work units: Sanding unit with sanding belt (R) – removes burrs protruding from the material surface, removes scale and corrosion from the surface Planetary disc brush unit (D) – rounds edges, creates radii, and removes oxide layer on the sides after laser cutting Rotary unit (A) with flap brushes – deburring and edge rounding without removing protective film, surface unification Abrasive fleece brush unit (B) – cleans and polishes the surface material before further processing These deburring machines are used for the following tasks: Deburring parts after laser cutting – deburring edges, removing oxide, and surface finishing Deburring parts after plasma cutting – slag removal, rust removal, removal of material overflows, edge rounding, and surface finishing Deburring parts after punching – removal of sharp edges, edge rounding, and final surface finishing Deburring parts after waterjet cutting – deburring and edge rounding, removing traces from waterjet cutting, and surface finishing Deburring film-coated stainless steel parts – deburring and edge rounding without removing the protective film Main advantages of the machine: Modular system – we design the machine exactly to your needs High-quality and even deburring of all product edges Machining of very small workpieces with magnetic or vacuum table Very simple operation via Schneider Electric touchscreen Grinding, deburring, and finishing with one machine Hsdpfx Aoudal Djd Dopa Very fast tool changes and rigid machine frame Given the wide variety of possible machine configurations, we recommend personal consultation and free grinding samples at our facility. This allows us to evaluate our customers’ requirements and then suggest the optimal machine configuration for your specific production needs.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 58 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6523036, darbinis plotis: 650 mm, aliuminio lakšto storis (maks.): 150 mm, garantijos trukmė: 12 mėnesiai, šlifavimo plotis: 650 mm, GECAM G65RRR mit Nass-Absauganlage Überschuss zum Bedarf, nur 58 Betriebsstunden Diese Maschine kann kostenlos so umkonfiguriert werden, dass Entgratungs-Topfbürsten oder Tonnenschleifbürsten anstelle des Schleifbands an Position 2, 3 oder an beiden Positionen (Position 1 zur Entfernung vertikaler Grate) eingesetzt werden können – bitte kontaktieren Sie uns für weitere Informationen. Hjdpfxswnukmo Ad Dspa Bearbeitungsbreite: 650 mm Nass-Absauganlage inklusive Verrohrung und Installation (Installation nur innerhalb des britischen Festlands kostenlos – für Installationen in Europa bitte Preis anfragen). Diese Maschine ist weit verbreitet in der Automobilindustrie und wird u.a. an Fertigungsstandorten für BMW eingesetzt. 3M 237AA Trizact Schleifbänder erzielen im Trockenbetrieb auf Material mit mehr als 1 mm Stärke (P2000 FEPA-Schliffbild) nahezu Spiegelglanz. 6 Monate kostenloser Schleifbandbezug für diese Maschine durch Finishing Aids and Tools Ltd (5 Bänder pro Position pro Monat). Für ein vollständiges Angebot, technische Informationen oder weitere Fragen zu dieser Maschine kontaktieren Sie uns bitte.

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, darbinis plotis: 150 mm, Long plate parts up to 150 mm wide, box sections, rectangular tubes, and strips. Deburring, edge rounding, and finish grinding. Sanding belt unit (K) Hpsdpfxsr Iyg Ae Ad Doa TopBrush unit (2TB) Working width: 150 mm Ex-showroom machine!