Lakštinio metalo šerpetų šalinimo mašina

VG Machines Edge Master

Gamybos metai: 2020, Sąlyga: naujas, DESCRIPTION The so-called half-water is produced in the demineralised water station using ion exchange technology. The station consists of 3 columns: Kdjdpfjfz Naksx Af Ijg - Strongly acidic cation exchanger in the sodium cycle, - Strongly basic anion exchanger operating in the chloride cycle, - Carbon filter Our RDI-2 / RDI-4 demineralisation stations are equipped with fully automatic control heads. The columns are made of AISI316L stainless steel.

Sąlyga: geras (naudotas), Gamybos metai: 2003, Offer 24365 Technical Data: - Bending capacity: Tube at 45 kg / mm² up to Ø 60 x 4 mm - Solid material up to 45 mm - Bending angle: 0 - 180° - Maximum centreline bending radius (Rm): 171 mm Kdjdpowq I Epjfx Af Isg - Minimum inner bending radius (Ri): 10 mm - Drive: 400 V / 4 kW - Space requirements approx.: W 400 x H 950 x D 600 mm - Weight approx.: 100 kg - Features: - Preselection of bending angle - Digital bending angle display and fine adjustment - Manual tube twisting device - Bending tools: 22 R 67 mm, 25 R 82 mm, 35 R 110 mm - Flat bar bending attachment

Sąlyga: naujas, Gamybos metai: 2025, keliamoji galia: 2 000 kg, Protec KT 2000 HV, hydraulically height-adjustable Load capacity: 2,000 kg Handheld remote control with digital display Dual foot pedal control Height approx. min. 800 mm tilted to center, max. height 1,400 mm Min. height horizontal: 1,000 mm Faceplate diameter: 1,200 mm Minimum tilt angle: 135° Ksdsncfvhjpfx Af Isdg Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Sąlyga: labai geros būklės (naudotas), Desktop Metal 3D Printer Complete System We offer you a Desktop Metal 3D printer complete system. 3D Metal Printer Studio System from Desktop Metal Complete System: 3D Printer + Debinding Machine + Sintering Furnace Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating Condition: Used (Good) Year of Manufacture: 2019 Kdsdpfxjk Hz Nqs Af Ieg Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Specifications: - Printable Materials: Metal - Technology: FDM - Application: Industrial - Other Features: Suitable for office use - X-Axis Travel: 30 cm (12 in) - Y-Axis Travel: 20 cm (8 in) - Z-Axis Travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, this printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing and enables new features such as the use of closed-cell infills for lightweight yet strong parts. 1.2 Desktop Metal Studio Debinder (Delamination Machine) - Fully automatic debinding - Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The Debinder prepares green parts for sintering by dissolving the primary binder. With a low-emission design, it requires no external ventilation and is safe for office environments. Automatic liquid distillation and recycling means no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace - Hybrid technology (microwave & conventional heating elements) - Build Volume: 305 x 205 x 205 mm - Carbon casing - Gas supply: 2 x 900 L gas bottles - Heating power: 20 kW Specifications: - Function: Sintering - Configuration: Chamber - Heat source: Gas - Other Features: High-temperature, automatic operation - Maximum temperature: 1,400°C (2,552°F) Description: Fully automated and designed to fit through an office door, the furnace provides industrial-grade sintering in an office-friendly package. Built-in, material-specific temperature profiles ensure uniform heating and cooling without the residual stresses often found in laser-based systems. Condition: Used Scope of delivery: (See images) (Subject to technical changes and errors; all information is non-binding!) For further questions, we are happy to assist you by phone.

Gamybos metai: 1998, Sąlyga: beveik kaip naujas (naudotas), Laser type: Q-switched pulsed solid-state laser Laser medium: Nd:YAG Wavelength: 1064 nm Beam diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Beam divergence: 5 mrad multimode, 2 mrad TEM00 Pulse duration (time): CW / 90 ns Max. output power: 65 W (130 W optional) in multimode, 16 W in single mode Pulse energy: 16 mJ (30 mJ optional) at 3 kHz Operating modes: CW, Q-switched from 0.1 to 100 kHz Kdsdpfx Ajd Dhw Nof Isg Beam deflection system: Galvanometer system Line width in mixed mode: approx. 0.12 mm

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, darbinis plotis: 3 100 mm, eigos ilgis: 350 mm, spaudimo jėga: 100 t, darbo diapazonas: 3 100 mm, Naudota, geros būklės Trumpf Trubend 3100 serijos 3000 3 metrų CNC lenkimo staklės, parduodamos. Naudojamos Trumpf Trubend 3100 B26 su prailgintu eiga ir daugiau šviesos tarp ašmenų, parduodamos. 3 metrų x 100 tonų, 6 ašių CNC lenkimo staklės. Markė/gamintojas: TRUMPF Modelis: TRUBEND 3100 B26 Tipas: CNC hidraulinės lenkimo staklės Pagaminimo metai: 2016 Vieta: Jungtinė Karalystė Kjdpfx Afov Hru Us Iedg Specifikacija: Spaudimo jėga: 100 tonų Tipas: hidraulinės, žemyn veikiančios, H tipo rėmo lenkimo staklės Bendras ilgis: 3,1 m / 3 metrai Iš viso 6 ašys, iš jų 4 ašių galinis matuoklis Jutiklinis ekranas valdymui Spaudimo jėga: 1000 kN Eiga: 350 mm Stabdžio veikimo laikas: 46 ms

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, mašinos/transporto priemonės numeris: 100810261, aušinimo tipas: vanduo, SHINOHARA 75 VP PERFECTING PRESS (1+4 COLOURS) CIP3. AUTOMATIC BLANKET WASHER, AUTOMATIC WASHING SYSTEM. UV LAMPS. WATER CHILLER WITH AUTOMATIC ALCOHOL MIXING AND PH CONTROL. AUTOMATIC METERING DEVICES. Kdodpfx Aotvmq Njf Ijg INCLUDED WITH THE MACHINE: WASHING ROLL WINDER. PAPER PALLET LIFTER. 2 CALIBRATION DEVICES. 20 SPARE ROLLERS. PRINT COUNT: 4,600,000.

Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SÇ 1000 DİJİTAL METRE, • 3 metrų ilgis Kdsdporblaljfx Af Iog • Matavimo tikslumas +/- 0,1 mm • Servovariklis (pasirinktinai) • Dešimtainio darbo režimo pasirinktis (ypač aliuminiui) • „Bluetooth“ matavimo metro pasirinktis (dėl išsamesnės informacijos prašome kreiptis) • 220 voltų įtampa • Liečiamas ekranas • Vieno mygtuko paspaudimu atitraukiama atrama, kad būtų lengviau išimti nupjautą gaminį iš formos • Naudojimą palengvinantis dizainas • Lengva kalibracija

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 600 mm, įėjimo įtampa: 400 V, bendras svoris: 3 560 kg, ruošinio aukštis (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm wide. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet. Kodpol Dw D Ejfx Af Ijdg With the SER600 Super Edge Rounder from Q-Fin, it is possible to deburr, grind, edge-break, round, descale, remove oxidation layer, or apply a linear finish to sheet metal parts up to 600 mm in width. A combination of these operations is also possible. The throughput rate of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model is equipped with a magnetic support and is therefore suitable for processing steel cut parts and other magnetic materials. The machine features 5 processing stations. Operation is conveniently controlled via an HMI touchscreen on the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this station removes burrs and/or discoloration from the product surface. If there are no burrs present, the grinding belt can be omitted or removed. It is also possible to use a finer grinding belt or finish with a Scotch-Brite belt. The second and third stations consist of a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations are fitted with 2 round brushes rotating in opposite directions. These brushes are used to remove sharp edges from the product by breaking edges or, through the unique combination of two brush systems, by creating a radius of up to R=3 mm. By installing special brushes, the SER600 with magnetic system is also ideally suited for removing the oxide layer from steel products or slag from plasma-cut products. We offer the machine in combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'. The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless steel extraction system operates wet, extracting grinding dust from stainless steel, steel, and aluminium, thus eliminating fire and explosion hazards. According to Q-Fin, it is the safest, simplest, and most sustainable method of extracting grinding dust. With the WES6000, there is no longer any grinding dust in the air and/or the working environment. We currently have 2 units of the SER600 in stock: - 1x new (Year of manufacture: 2025) - 1x only a few months old, like new (Year of manufacture: 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the construction and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - Electrical connection of the SER600: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Sąlyga: geras (naudotas), Manufacturer: OMERA Type: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Kdedpfx Afjkvnumj Ieg Table width: 1000 mm Throat depth, horizontal (HOR): 670 mm Throat depth, vertical (VER): 940 mm Stroke cylinder: 350 mm Column diameter: 200 mm Specifications Metric / US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.