Pratekamo apdirbimo centrai pirkti naudotą (135)

Sąlyga: labai geros būklės (naudotas), 3-axis (X-Y-Z) CNC machining center – Cantilever design Movable horizontal plate (workpiece), static machining head Control system (BiesseWorks software), with separate electrical and control panels Machining head safety enclosure, safety tread mats Infeed table (workpiece support) at entry No. 2 workpiece clamping vices positioned within the working area Outfeed table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm 3000 x 1300 x 60 (approx.) Total connected load (kW) 24 WORKING UNITS (TOP): Independent vertical drilling spindles: 29 pcs. Independent horizontal drilling spindles: 10 pcs. (8 X + 2 Y) Grooving saw unit (for X-axis machining), diameter 160 mm (1 pc. x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (1 pc. x approx. 4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles: 29 pcs. Independent horizontal drilling spindles: 10 pcs. (8 X + 2 Y) Grooving saw unit (for X-axis machining), diameter 160 mm (1 pc. x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (1 pc. x approx. 4.5 kW) Hfjdpfx Abowb Allomer

Sąlyga: naujas, Gamybos metai: 2024, Axle: 920 mm X-axis: 3000 mm Material thickness Z: 12 mm - 30 mm Feed rate: 20 m/min A-axis: 360 degrees Minimum dimensions: Plate: x = 300 mm y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade operates in the X-direction. Maximum cutting depth with saw blade: 10 mm Motor: 0.75 HP, 400 Volt Hjdecnz H Hopfx Abmsfr Required extraction capacity: 2300 m³/h Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: naudotas, Gamybos metai: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS PROCESSING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY EASY PROGRAMMING "MATIC" WORKTABLE: SINGLE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHORM400 AXES Working area X-axis (reference side): 3,680 mm Working area Y-axis (max. loadable workpiece at rear stops): 1,680 mm Workpiece passage Z / Number of Z axes: 170 mm / 1 Workpiece length for pendulum operation: 1,650 mm Travel speed X-Y axes Pro-Speed: 85 m/min Z-axis speed: 30 m/min INSTALLATION Installed power: 62–82 KVA Compressed air requirement: 400 NL/min Extraction air requirement: 4,430 m³/h Extraction air velocity: 25 m/s Extraction port diameter: 250 mm GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with worktable and workpiece supports suitable for: - Vertical drilling on panel surfaces - Horizontal drilling on all four workpiece edges - Grooving with disc cutter - General milling operations (3-4-5 axes) Hsdpfx Absxnldbomefr MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel, reinforced throughout the entire machine bed for extreme rigidity and stability through welded-in reinforcements. The table design with a large base is the key to ensuring permanent precision and stability. The machine layout offers the operator an optimal workflow with a minimal footprint. The moving gantry is built from a solid monoblock and is guided on prism-ground rails with ball-bearing carriages in the X-axis. The mobile unit carries the operating unit, which is also mounted on prism-ground rails and ball-bearing guides. AXIS MOVEMENT All axes move on large-cross-section linear prism guides with wide-bearing ball-bearing shoes to ensure optimal gliding even at the highest speeds and accelerations. The precise and fast positioning of the moving gantry (X-axis) is achieved via rack and pinion with helical teeth. Large-diameter ball screws ensure accurate positioning of the working unit along the moving gantry (Y and Z axes). MOTORS, DRIVES, AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are achieved with high-quality drives and brushless motors, sized for speeds up to 90 m/min, ensuring the best possible surface finish. CONTROL SYSTEM The control unit consists of a numerical controller for milling and drilling with "Xilog Maestro" graphic interface on a Windows 7-based Office operating system: - 17" color LCD screen - QWERTY keyboard - Swiveling operator panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features: Programming - Parametric graphical programming - Import of DXF files (2D; geometries like "SPLINE", "POLYLINE 3D", straight or circular interpolation in three axes, linear in space, spiral in the chosen plane) - Supported programming with graphical and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Option to shift panel zero-point for drilling on slanted or curved panel edges

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25167180701, bendras plotis: 1 000 mm, bendras aukštis: 60 mm, Y ašies padavimo greitis: 50 m/min, padavimo greitis Z ašis: 20 m/min, ruošinio aukštis (maks.): 60 mm, sukimosi greitis (min.): 4 000 aps./min, galia: 4,5 kW (6,12 AG), oro poreikis: 2 000 m³/val, CNC machining center Manufacturer: Masterwood Model: Project TF 100 2.0 Technical specifications: Axes: X-axis: Maximum workpiece length: unlimited Minimum workpiece length: 250 mm Travel speed: 0–25 m/min Y-axis: Maximum workpiece width: 1,000 mm (for all units) Minimum workpiece width: 80 mm Travel speed: 0–50 m/min Z-axis: Maximum workpiece thickness: 60 mm Minimum workpiece thickness: 10 mm Travel speed: 0–20 m/min The minimum and maximum workpiece sizes depend on the weight and the length-to-width ratio. • Air tables in the working area • Roller support at infeed and outfeed • Panel dimension measurement sensor • Ball screw and linear guides • Rack and pinion drive • Centralized lubrication • Import of DXF files Milling unit Including Masterwork software extension Spindle speed: 1,000 to 18,000 rpm Motor (frequency controlled): 3.3 kW Includes integrated extraction control (during drilling, only the drilling head is extracted; during milling, only the milling unit extraction is activated) Drilling head with 16 drills for 5-sided processing Grooving saw unit Milling unit with 6-position tool changer incl. grooving saw blade, 2 diamond cutters, 1 WPL finish cutter Pre-setup for CLAMEX and door packages 2 foldable roller conveyors Milling unit for Clamex connectors Milling unit configured for door processing with tool changer, incl. special tool change position in the tool changer, angle gearbox for accepting a lock case milling cutter, macro for lock case processing Hsdpfjxz Hgdjx Abmsfr Automatic, program-controlled central lubrication Monitoring camera

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2015, I am selling an automatic CNC machining center for BLOCK-HOUSE production, Hundegger K2i, year of manufacture 2011. Almost like new. Year of construction 2015. Undertable rotary saw with saw blade diameter from 750 mm to 800 mm, 360° rotation, servo-hydraulic tilt from 0–65°. Universal 5-axis unit with disc cutter, end mill, and end milling head, milling head diameter 350 mm x 100 mm shank cutter. Combination tool holder for at least 5 tools with horizontal boring device, power up to 2.5–3.0 kW, maximum drilling diameter 24 mm, minimum drilling length 460 mm, minimum machining depth 300 mm. Positioning and clamping of the workpiece via gripper arms. While the workpiece is measured and transported to the desired position, the gripper arms hold and stabilize the workpiece as close as possible to the tool. The processed material can be rotated automatically. Tolerance +/- 2 mm for a length of 13 m Fully automatic wood infeed with feed roller conveyor and feed as well as sliding cross conveyor. K2i: Undertable tilt crosscut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Combination support device for vertically operating tools Hjdpfx Aoxtxkxebmjfr K2i: Drilling device (2.2 kW) – vertical drilling direction K2i: Combination support device for horizontally operating tools K2i: Drilling device (2.2 kW) – horizontal drilling direction K2i: Marking tool (rear or user side) K2i: Fully automatic element rotation – hydraulic K2i: Transport and positioning system “two-hand system” K2i: Electronic connection K2i: Roller conveyor for removing wooden elements with pusher K2i: 5-arm storage table K2i: Safety device K2i: High-quality machine surface K2i: Extension of the K2i frame to 13.56 m K2i: 5-axis universal milling unit – UF5 (upgrade to 4 axes) K2i: Remote maintenance (incl. portable video camera) K2i: Dovetail milling machine (with rotating blades) 60x28x16.5 Ideal for timber construction! Available immediately.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008370, Darbinis plotas X ašyje: 5055 mm Hfodpfxex A Tk So Abmsr Darbinis plotas Y ašyje: 1930 mm Darbinis paviršius: Su vakuuminėmis konsolių atramomis Pagrindinio veleno galia: 19 kW Valdomų ašių skaičius: 5 ašys Maksimalus briaunos aukštis: 60 mm Gręžimo galvučių skaičius: 29 Įrankių vietų skaičius: 31

Sąlyga: labai geros būklės (naudotas), CNC flexible automatic through-feed drilling machine (portal-type) with dowel insertion system Movable panel (workpiece), movable working head (horizontal panel-workpiece) Control system: Power Control, WoodWOP software Integrated machine safety cabin Workpiece drive via 3 transport belts Feed speed (m/min): approx. 1 - 90 Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1400 x 60 Hfedpfxod Nvi Dj Abmsr Maximum axis travel paths (X - Y - Z) mm: 3580 x 1838 x 125 Simultaneous machining of two workpieces (in Y-axis) mm: 600 + mm 600 Total connected load (kW): 38 WORKING UNITS (TOP): Drilling units with vertical spindles (qty): 1 Independent vertical drilling spindles (qty): 38 + 3 special Independent horizontal drilling spindles (qty): 6 Grooving saw unit (for X-axis operations), diameter (mm): 100 Vertical main spindle (milling unit) no.: 1 x SK 30 (vertical main spindle power kW: 6) Automatic tool changer, disc-type, qty: 3 tool positions WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles (qty): 2 Horizontal drilling spindles – right side (qty): 13 + left side (qty): 13 Glue injection nozzles and dowel insertion (right side): 2 + (left side): 2 Dowel magazine for automatic dowel insertion (qty): 1

Gamybos metai: 2014, Sąlyga: labai geros būklės (naudotas), Achse 920 mm x-Axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min. A-Axis 360 degrees Minimum dimensions: Plate: x = 300 mm y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in the X direction Max. cutting depth with saw blade: 10 mm Motor 0.75 HP, 400 Volt Required extraction capacity: 2,300 m³/h Hfodpfx Asfmdcqsbmer Location: arriving at stock 54634 Bitburg - immediately available -

Sąlyga: naudotas, Gamybos metai: 2023, Technical Data Working Area I.M.S. I.U. Working Area X Axis 5515 mm (217") Working Area Y Axis 1620 mm (63¾") Panel Passage Y 1900 mm (74¾") Panel Passage Z 250 mm (9¾") Workpiece Length for Pendulum Work 2600 + 2600 mm (102" + 102") X-Y Axis Traverse Speed PRO-SPACE: 56 m/min (184 ft/min) X-Y Axis Traverse Speed PRO-SPEED: 78 m/min (256 ft/min) * For further details, please refer to the respective machine layout. With a 5-axis motor, the working range in Y increases to 1680 mm (66") for the JQX motor or 1720 mm (67½") for KS/KT motors (maximum loadable panel width with horizontal drilling, electrospindle only in vertical position, intermediate reference stops not present). Installation Data I.M.S. I.U. Installed Power 23 – 28.5 KVA Electrical Specifications: 400 V, Voltage 50 Hz Frequency, 3 Phases Air Consumption 450 Nl/min Compressed Air Consumption 4500 m³/h (2650 CFM) Extraction Airflow Velocity 30 m/s Extraction Flange Diameter 250 mm (9.8") Noise Level VSA* LAV* During Drilling: 72.2 dB(A) / 74.6 dB(A) During Milling: 74.3 dB(A) / 80.7 dB(A) Standard Reference EN ISO 11202:1995 *VSA = without load and without extraction *LAV = in operation, with extraction Hedpexwht Dofx Abmjfr Location: Nattheim

Sąlyga: geras (naudotas), Gamybos metai: 2019, CNC throughfeed machining centre with dual gripper drive in X-direction and gantry design in Y-direction. The second gripper allows for formatting up to 15 mm as well as continuous milling movement in the X-direction. The workpiece length (X-direction) is measured using a sensor. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle: 12 kW HSK-F63, max. 24,000 rpm 4-position linear tool changer for milling tools. Maximum tool diameter: 120 mm Maximum tool length: 100 mm Single pick-up station for ergonomic loading or removal of tools from the machine. Additionally usable as an additional tool position for 11 virtual tools. Automatic tool length measuring system in Z-direction Drilling head DH 25 8H 1S Hodpfx Asxrahcebmsfr - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation licence Dongle upgrade 3D simulator with collision checking for WOODFLASH at the machine Workpiece release at the rear of the machine Machine supplied without tools and HSK holders.

Sąlyga: geras (naudotas), Gamybos metai: 1994, I am selling an automatic CNC machining center for BLOCK-HOUSE production, Krüsi CM-40. Year of manufacture: 1994. - Crosscut saw - Tenoning unit (top and bottom) - Tenoning unit (left and right) - Dowel drilling unit - 4-head milling aggregation - Automatic feed system with ±1mm accuracy - Infeed length: 12m Hjdper Atcysfx Abmsfr Ideal for timber construction! Available immediately.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008198, Darbinės srities X ašis: 4200 mm Darbinės srities Y ašis: 1400 mm Darbo paviršius: Su vakuuminėmis konsolėmis Pagrindinio veleno galia: 18,5 kW Hfsdpsx A Hbkefx Abmor Kontroliuojamų ašių skaičius: 4 ašys Maksimali briaunos aukštis: 60 mm Gręžimo veržliarakčių skaičius: 35 Įrankių vietų skaičius: 26

Sąlyga: labai geros būklės (naudotas), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Movable table (workpiece), stationary machining head – horizontal table (workpiece) PowerControl control system (woodWOP software) Machining head safety enclosure No. 2 secured workpiece clamping chucks within the working area WEEKE pre-positioning unit – enables faster positioning of workpieces in machines equipped with clamping grippers. Support table (workpiece support) at infeed – outfeed table (with conveyor belt) With automatic panel pusher Minimum workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1000 (option 1300) x 80 (2 x 40 mm) Simultaneous processing of two workpieces (in the Z-axis) With separate electrical and control cabinet WORKING UNITS (UPPER): 2V32, 2H8X/Y2, N2 X-Y90, F2-ETP-6 KW No. 23 independent vertical drilling spindles (drill head power 2.3 kW) No. 5 independent horizontal drilling spindles (4 in X + 1 in Y) No. 1 grooving saw unit (swivelable 90° in X-Y-direction), diameter: 125 mm Hsdpfx Abolkdpmomofr No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW) WORKING UNITS (LOWER): No. 23 independent vertical drilling spindles (drill head power 2.3 kW) No. 5 independent horizontal drilling spindles (4 in X + 1 in Y) No. 1 grooving saw unit (swivelable 90° in X-Y-direction), diameter: 125 mm No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW)

Gamybos metai: 2007, Sąlyga: labai geros būklės (naudotas), Used CNC machining center incl. carousel buffer Manufacturer: Weeke Model: Optimat BHX 500 Year of manufacture: 2007 Technical data: Workpiece length min. – max. mm 200 – 2500 Workpiece width min. – max. mm 70 – 1000 Workpiece thickness min. – max. mm 4 – 80 Maximum number of stacked workpieces 2 Configuration 2V36, 2H8X/2Y, N2 X-Y 90, F2-ETP-6 kW Vertical drilling spindles per side, pcs. 36 Horizontal drilling spindles per side, in X direction 8 Horizontal drilling spindles per side, in Y direction 2 Grooving saw X-Y, swiveling 90°, per side YES Milling spindle, per side, kW 6 Integrated options - Extension package for vertical drilling spindles - Infeed table with automatic workpiece feeding and positioning - Integrated length measurement in the machine - Barcode software - Carousel buffer (description below) Technical data carousel buffer Number of buffer slots 30 Workpiece dimensions Length 250 – 3000 mm Width 100 – 1000 mm Thickness 12 – 80 mm Overall length Approx. 5700 mm Usable width Approx. 2000 mm Transfer height Approx. 950 mm Removal/placement height Approx. 1120 mm Pitch Approx. 125 mm Hedpfx Ajiy Di Isbmjfr

Sąlyga: naujas, Gamybos metai: 2025, The ATC plotter series has been designed for professional use in large industrial plants and factories, serving the production of complex large-format components. Thanks to its special construction, the machine is adapted for manufacturing, among other things, foundry models and yachts, significantly reducing processing time. To meet the requirements of heavy-duty machining, ATC machines feature additionally reinforced frames and more powerful AC servo drives on each axis. The presence of five axes supports the processing of even the most demanding components. Hjdpfx Asiq U Tqobmofr Plotters in this series are standardly equipped with automatic tool changers, a six-position linear tool magazine, and a tool height sensor. These solutions significantly accelerate processing when multiple milling cutters are required. Materials that can be machined: - Wood - Wood-based materials (chipboard, MDF, OSB, etc.) - Plastics - Composites - PVC - Non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The machine frame is made of steel and cast iron, providing high rigidity and resistance to overloads related to the machining process. WORKING AREA: The usable working area of our machine is 3000 x 6000 [mm]. Z-AXIS RANGE AND GANTRY CLEARANCE: Parameters can be tailored to individual customer requirements. DRIVES: Our machines are driven by SERVO motors, ensuring proper acceleration and speed in every direction. The X and Y axes use classic, proven helical racks for durability and precision, while the Z axis is powered by a high-quality ball screw. All axes run on linear rail guides. SPINDLE: A high-class, powerful brushless spindle drives the cutting tool. Spindle speed ranges from 6,000 to 24,000 rpm. A frequency inverter with greater power than the spindle is used for power supply, protecting against speed drops under heavy load. TOOL MAGAZINE: Standard equipment includes a linear tool magazine with six HSK holders. Additional tool magazine positions are available as an option. SOFTWARE: The machine is supplied with dedicated CAD/CAM software, enabling fast and easy design of parts, which the program then converts into G-code. Import of ready-made files from other programs is also possible. CONTROL SYSTEM: Operation is managed via a controller equipped with its own processor and operational memory, ensuring stable and reliable performance.

Sąlyga: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1691, bendras ilgis: 13 500 mm, pjūklo disko skersmuo: 760 mm, įvesties srovės tipas: trifazis, darbinio aukščio: 300 mm, bendras svoris: 12 500 kg, darbinis plotis: 450 mm, pjovimo aukštis (maks.): 300 mm, pjovimo plotis (maks.): 450 mm, įėjimo įtampa: 380 V, PARDUODAMA: CNC STAKLĖS HUNDEGGER K1-A Parduodu gerai prižiūrėtas ir patikimas Hundegger K1-A CNC stakles, 1997 m. Modelio metai. Staklės nuolat prižiūrimos, 2015 metais atliktas pilnas atnaujinimas tiesiogiai iš Hundegger (nauja programinė įranga ir elektroniniai komponentai). 🔧 Staklių būklė Vis dar eksploatuojamos kasdien Vykdoma testinė eiga/parodomoji demonstracija Hodpsxyhmpjfx Abmsfr Tinkamai prižiūrėtos ir puikios techninės būklės ⚙️ Įranga ir įrankiai 5 ašių pjūklo modulis 4 ašių universali frezavimo galva 2 vertikalūs gręžimo moduliai 1 frezavimo modulis 2 horizontalūs gręžimo moduliai Horizontalus frezavimo/išpjovimo modulis 3 pusių žymėjimo/brėžimo įrenginys 📦 Atnaujinimai (Hundegger, 2015) Nauja oficiali Hundegger programinė įranga Nauji elektroniniai komponentai Pagerintas tikslumas, patikimumas ir našumas

Gamybos metai: 2011, Sąlyga: beveik kaip naujas (parodų įrenginys), I am selling an automatic CNC machining center for BLOCK-HOUSE production: Stromab Autoblox. Year of manufacture: 2011. New machine. - Cross-cut saw: 600 mm / 7.5 kW - Dowel drilling unit: up to diameter 35 mm x depth up to 320 mm - Tenoning mill: up to diameter 230 mm / 4 kW Hfodpfogiwkuox Abmjr - Horizontal milling cutter: up to diameter 230 mm / 4 kW - Vertical milling cutter: up to diameter 180 mm / 4 kW - Automatic feed system with ±1 mm precision Ideal for timber construction! Available immediately.

Sąlyga: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Parduodu Hundegger P10 įrenginį, nuolat eksploatuojamą. Įrenginys pirktas kaip naudotas, tiesiogiai iš gamintojo Vokietijoje. Paruoštas tolimesniam darbui. Galimybė apžiūrėti veikiančią įrangą. Hfodpfoxlla Djx Abmor

Sąlyga: labai geros būklės (naudotas), 3-axis (X-Y-Z) CNC MACHINING CENTER Mobile table (workpiece), movable machining head - Vertical table (workpiece) Control system: TPA - Software: Albatros Safety enclosure for the machining head Workpiece feed with transport chain Rubber rollers for securing the workpiece during feed and machining Infeed table (with conveyor belt) - Outfeed table (with conveyor belt) With automatic workpiece return system to the operator (180°) Minimum working area (X - Y - Z) mm: 260 x 40 x 10 (approx.) Maximum working area (X - Y - Z) mm: unlimited x 1300 x 80 (approx.) Separate electrical and control panel Total connected load (kW): 35 Hfodpfjihfiiox Abmjr WORKING UNITS: Drilling unit with vertical spindles (quantity): 1 Independent vertical drilling spindles (quantity): 24 (7 in X + 17 in Y) Drilling unit with horizontal spindles (quantity): 2 Independent horizontal drilling spindles (quantity): 36 (9+9 = 18 x 2) Motor power, drilling head (kW): 3 x 3 (approx.) Vertical main spindle (milling unit) quantity: 1 Vertical main spindle motor power (kW): 7.5 (approx.) Automatic tool changer system, turret - Magazine positions: 10 tool stations

Sąlyga: naujas, Gamybos metai: 2025, Spindle speed: 4,460 rpm Min. workpiece dimension X: 300 mm Min. workpiece dimension Y: 90 mm Min. workpiece dimension Z: 10 mm Max. traversing speed X-axis: 20 m/min Max. tool diameter: 35 mm Max. workpiece dimension X: 3,000 mm Max. workpiece dimension Y: 900 mm Max. workpiece dimension Z: 50 mm Grooving saw speed: 5,700 rpm Hfodpfx Aol D Rw Nobmjr Dimensions: 3,704 mm x 1,455 mm x 2,209 mm (L x W x H) Nominal diameter of extraction port (external): 120 mm Drive motor power: 2.2 kW Weight: 1,200 kg

Sąlyga: naudotas, Gamybos metai: 2013, Alberti Vector B/CN is a vertical coordinate boring machine designed for precise drilling and machining of panel materials. The machine features continuous workpiece feed with automatic loading and movement along the axis. Thanks to its monolithic steel construction and four-axis control, it provides high rigidity, stability, and accuracy even during demanding operations. Optimized work cycles enable efficient drilling, milling, and workpiece handling. A combination of multiple spindles, independent vertical units, and the option to use a saw makes this machine a versatile solution for the furniture and woodworking industries. Technical specifications Max. workpiece dimensions: 3200 × 1200 mm Min. workpiece dimensions: 300 × 130 mm Machinable thickness: 10–60 mm Max. programmable speed (X/Y/Z): 100 / 45 / 12 m/min Axis positioning tolerance: ± 0.1 mm Spindle motors: 2 × 1.5 kW Spindle speed: 3800 rpm Independent vertical spindles: 30 units, 32 mm pitch Saw motor (Ø 125 mm): 1.33 kW Saw inverter: 7.5 kW – 1000 ÷ 18000 rpm Hfsdpfx Abexgfg Temjr Electrospindle motor: 6.7 kW Electrospindle speed: 9000 ÷ 18000 rpm Max. tool diameter: 60 mm Max. required power: 10 kW Operating pressure: 6–7 bar Air consumption: 100 Nl/min Extraction air speed: 30 m/s Chip extraction capacity: 5000 m³/h Total machine weight: 3500 kg Central unit weight: 350 kg Dimensions (L × W × H): 5600 × 2110 × 2200 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Machining center Manufacturer: Weeke Model: BHX 500 Year of manufacture: 2008 Working range X: 2,500 mm Working range Y: 1,300 mm Working range Z: 4 - 80 mm Number of routing units: 2 Number of drilling units: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Grooving saw: Swivels 90° X-axis speed: 130 m/min Y-axis speed: 80 m/min Z1-axis speed: 50 m/min Z2-axis speed: 27 m/min Spindle speed: 18,000 rpm Hfsdpsh E Sghjfx Abmor Dismantled - available immediately

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2019, I am selling a vertical throughfeed CNC machining center, Vitap Point K2 2.0, year of manufacture 2019. Hfodjvx Dz Djpfx Abmsr Configuration: - 1 pc. milling spindle, 5.0 kW - 12 + 4 + 4 pcs. drilling spindles - 1 pc. grooving saw Return conveyor returns the elements either to the operator or to the rear for throughfeed mode. Max. workpiece size: x 1250 x 50 mm Min. workpiece size: 270/400 x 185 x 4 mm Overall dimensions: 2900 x 1650 mm Overall weight: 950 kg Supplied with full documentation and CE certificate. Very good condition. Immediately available.

Sąlyga: naudotas, Gamybos metai: 2014, BIESSE Bre.Ma VEKTOR 15-13 CNC drilling and dowel inserting machine Art.-No. BCDR14530 Manufacturer: BIESSE / Bre.Ma Model: VEKTOR 15-13 Year of manufacture: 2014 Description: The Bre.Ma VEKTOR 15-13 is a vertical CNC-controlled drilling and dowel inserting machine designed for precise machining of panel materials in a variety of sizes. Thanks to its compact construction and ergonomic design, it delivers superior machining quality while minimizing required floor space. The machine is specifically engineered for flexible production requirements—ideal for furniture manufacturers and suppliers focused on customer-specific batch sizes. Technical Data: • Model: VEKTOR 15-13 • Year of manufacture: 2014 • Serial number: BCDR14530 • Control: CNC • Installed power: 11 kW • Air consumption: approx. 200 NL/min • Extraction capacity: approx. 4,500 m³/h • Air pressure: 6–7 bar • Workpiece thickness: up to 80 mm • Max. workpiece width: 1,300 mm • Min. workpiece size: 240 × 40 × 8 mm • Turret tool changer: 10 positions • Spindle speed: up to 18,000 rpm • Weight: approx. 2,800 kg Applications: Hfedpfxjxwd I Re Abmor Vertical processing of furniture and cabinet components, including drilling, routing, grooving, glue injection, and dowel insertion in a single operation. Ideally suited for industrial production lines with automated part handling. Highlights: • Compact design with minimal space requirements • Superior processing quality due to vertical panel orientation • 10-position turret tool changer (NC-controlled, < 2 seconds) • Laser-based zero-point detection system • Optional integration into production lines with robotic system (ROS) • Full compatibility with Biesse SmartConnection and Sophia IoT system

Sąlyga: labai geros būklės (naudotas), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Moving table (workpiece), stationary machining head – horizontal table (workpiece) Xilog Plus 2 control (Xilog Plus 2 software) Machining head safety cabin. With separate electrical and control panel No. 2 workpiece clamping grippers with interlock in the working area With automatic sheet pusher Infeed table (with conveyor belt) – outfeed table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 70 x 10 (2 x 5 mm) Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1300 x 80 (2 x 40 mm) Simultaneous machining of two workpieces possible (on Z-axis) WORKING UNITS (TOP): 2V32, 2H8X/Y2, N2 X-Y90, F2-ETP-6 kW No. 48 independent vertical drilling spindles No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) Hfodefz I Ufjpfx Abmjr No. 1 grooving saw unit – diameter 125 mm No. 1 x HSK63F vertical main spindle (milling unit) Power of vertical main spindle: 7.5 kW WORKING UNITS (BOTTOM): No. 48 independent vertical drilling spindles No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit – diameter 125 mm No. 1 x HSK63F vertical main spindle (milling unit) Power of vertical main spindle: 7.5 kW Injectors for glue feeding and dowel insertion. Dowel magazine for automatic dowel loading