BLOCK-HOUSE medinių konstrukcijų apdirbimo centras

Krüsi CM-40

Sąlyga: geras (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Year of Manufacture: 1996 The Krüsi CM40 consists of the following components: - Circular saw (cross-cut saw) - Log house milling unit (horizontal and vertical) - Grooving mill (horizontal) - Boring unit - Infeed table 6 m - Outfeed table 6 m KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of Manufacture: 1996 CE marked Condition: good, technically inspected and cleaned / ready for operation Operating Principle: Processing of timber for chalet or log house construction Beams can be processed in a single pass - Cross-cutting - Horizontal and vertical milling of necks / grooves in a single clamping - Drilling - Milling of end grooves Workpiece: - Max. cutting height: 200 mm - Max. cutting width: 250 mm Robust, welded construction. Machine (horizontal and vertical milling units) equipped with 4 special milling motors, hardened and ground guides for highest machining accuracy. Carriage guided by preloaded, dust-protected, ball-bearing rollers. Working range up to 200 x 250 mm. Fully operational, with contactor control, motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with safety covers, central connection for customer-side chip extraction, 2 eccentric clamps, without milling tools (Falter). Featuring hydropneumatic horizontal and vertical feed, electrically controlled, operating in tandem with spindle motors. Rapid traverse and feed continuously adjustable. Completely wired and installed, including air maintenance unit. Beams thicker than 14 cm must be machined in two passes. Machine Description / Equipped with: 1. Saw Unit: Manual feed Spindle adjustment with analog position display Saw blade Ø max. / bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed min 1 / 2900 Power kW 2.2 2. CM Milling Aggregate (Log House Milling Unit): Hydropneumatic feed Spindle adjustment with digital position display Horizontal milling unit Cutter Ø 180 mm Bedpfx Aajvfv Tfoheld Max. cutter width 130 mm For cutter width over 60 mm, use only aluminum alloy cutter with indexable inserts 2 motors, hydropneumatic feed, each 2.2 kW Hydropneumatic feed Rapid traverse and working feed continuously adjustable 3. Boring Unit: Manual feed Spindle adjustment with analog position display Drill holder - ER 25 collet Max. clamping Ø: 16 mm Max. drill Ø: 32 mm Motor min’1 1450, kW 1.8 4. Planer Milling Unit: Hydropneumatic feed Spindle adjustment with digital position display Cutter Ø max. 230 mm Max. cutter width 60 mm Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatics Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical System Operating voltage V / Hz: 380, 50 Rated power kW: 8.8 - 15.8 depending on configuration Local fuse required: 3 x 25 A tr

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Blsdpow Sy T Hsfx Aahed Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Sąlyga: geras (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 POS 1: Motorized Roller Conveyor Working width 400 mm, infinitely variable feed speed 2.0 kW motor, length 6000 mm POS 2: Longitudinal Saw Saw blade diameter 400 mm Pneumatic adjustment of cutting depth Main motor 4.0 kW POS 5: KRÜSI Chalet Construction Machine / Log House Production Machine Type CM 40 Machine no. 431 Year of manufacture: 1996 Sawing Unit: Manual feed Spindle adjustment with analog position indicator CM Milling Unit: Bodjhw N Npepfx Aahjld Hydropneumatic feed Spindle adjustment with digital display Drilling Unit: Manual feed Spindle adjustment with analog position indicator End Milling Unit Hydropneumatic feed Spindle adjustment with digital display POS 6: Motorized Roller Conveyor Working width 400 mm, infinitely variable feed speed 2.0 kW feed motor Length 12,000 mm 9 adjustable end stops, pneumatically controlled 10 lateral pushers for material transfer POS 7: Assembly Table 4,400 mm x 12,000 mm Manufacturer: Sweden Year of manufacture: ca. 1985 Assembly table for further processing of manufactured log house timbers. 4 chain hoists for transverse transport Geared motor with 4.0 kW

Sąlyga: geras (naudotas), Gamybos metai: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating principle Processing of timber for chalet construction / log house production. Beams can be processed in a single pass. • Cross-cutting • Horizontal and vertical milling of notches/grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Rugged welded steel construction. Machine (horizontal and vertical milling units) equipped with 4 special milling motors, hardened and ground guides for maximum processing accuracy. Carriage guided by dust-protected, preloaded ball bearing guide rollers. Blodpfx Aeu Uh T Doahjd Working range up to 200 x 250 mm. Fully operational, with contactor control system; motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for customer-provided chip extraction system; includes 2 eccentric clamps; no milling tools (rebate cutter). Features electro-hydropneumatic horizontal and vertical feed, synchronized with the start of the milling motors. Rapid traverse and feed rate steplessly adjustable. Fully wired and installed, including air service unit. Beams thicker than 14 cm must be processed in two passes; for these beams, the workpiece must be fed again to the extent of the excess thickness for further milling. Machine guards over all moving parts with gas spring counterbalance. Machine description / equipped with: 1. Saw unit: Manual feed Spindle adjustment with analog scale display Max. saw blade Ø / bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (uni-directional) Adjustable riving knife Motor speed min⁻¹: 2900 Power (kW): 2.2 2. CM milling unit (log house unit): Hydropneumatic feed Spindle adjustment with digital scale display Horizontal milling unit: Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter width >60 mm only use aluminum alloy cutters with indexable inserts. 2 x hydropneumatic feed motors, each 2.2 kW Hydropneumatic feed; rapid traverse and working feed rate steplessly adjustable. 3. Drilling unit: Manual feed Spindle adjustment with analog scale display Drill chuck: ER 25 collet Max. clamp Ø: 16 mm Max. drill Ø: 32 mm Motor speed min⁻¹: 1450, Power (kW): 1.8 4. End milling unit: Hydropneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor min⁻¹/2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics Required operating pressure min/max. MPa (bar): 0.7/1 (7/10) Air consumption: 8 Nm3/h Electrics Operating voltage V/Hz: 380 V, 50 Hz Rated power: 8.8 – 15.8 kW depending on configuration Customer-supplied fuse: 3 x 25 A (slow-blow) Max. simultaneous power demand: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Total height, guard lowered: 1600 mm Total height, guard raised: 2200 mm Extraction port Ø (under-floor extraction) Weight: approx. 1300 kg Including roller conveyor 2 x 6 m (2 x 4 m) Technical data subject to change!

Sąlyga: naudotas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- The machine will be cleaned and fully inspected before delivery. Technical Data Overview (additional accessories possibly included; please inquire separately) Pos. 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut detection Blodpfsvu Hfqex Aahsd > NC length stop, mounted on slot table included Positioning of cross-cut saw integrated in the control system. > Length: 3500 mm Pos. 2: Tenoning and slot spindle ----- > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling spindle (climb & counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Muntin guide consisting of: Guide rail on the stop (climb spindle section), muntin support bar from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal profiling unit, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool diameter: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online-capable > Rebate device for tear-free rebating > Double-parts package > Return system for one-man operation: swivel belt > Screen control > Tilt window unit > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without working tools No original pictures available yet. Images show an identical machine from our archive. ----- Price for the above-mentioned machine on request! ----- Option with surcharge: EUR 6,500.00 Note...

Sąlyga: naudotas, Chipping rundvirke: 100–150 m³/t Bjdpfx Ashclffsahjld Flising av småved og avfall: 50–100 m³/t Vekt: 3165 kg Maks. stokkdiameter: 254 mm Söderhamn Eriksson 670-56 CC flishogger med elektrisk motor. Söderhamn Eriksson 670-56-flishoggeren er beregnet for produksjon av flis til tremasse, fiberplater og sponplater. Både rundvirke og sagbruksavfall kan benyttes som råstoff. Flishogger 670-56 mater horisontalt, i en vinkel på 37,5 grader mot fiberretningen. Flis av jevn og høy kvalitet kan enten ledes ut i bunnen eller blåses rett opp. Bli en av de sagbruksbedriftene som forvalter ressursene sine på en smart måte.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 500 h, Funkcionalumas: visiškai funkcionalus, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain after the finger-jointing press, foldable - Drying paternoster approx. 7 m, for board lengths up to 6 m - Cut-off and zero saw - Conveyor belt for residual wood disposal Bjdpswclkyofx Aaheld - Stacking system - Batten magazine not for sale - Package cross conveyor The machine is in very good condition, with very few operating hours. Machine is still assembled, but available immediately.

Sąlyga: paruoštas naudoti (naudotas), For turning plates, discs, or bowls up to 250 mm Ø. Machine with vacuum clamping. Bsdsrh Hntjpfx Aahold

Sąlyga: naujas, Gamybos metai: 2024, Magnetic separator for chip conveyor line Tube magnet with 4 magnetic plates (permanent magnet) Blsdpfx Aajcqvhwohed Hinged door for easy removal of metal parts Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available -

Sąlyga: naudotas, Gamybos metai: 1993, Häwa rąstų žievės šalinimo staklės su frezavimo galva H249 / 1000 Pagaminimo metai: 1993 Rąsto skersmuo 0,25 m – 1,2 m Rąsto ilgis 1,8 m – 7 m Frezos galva 30 kW Bodpfx Aajx Rv T Iehjld Šaknų mažintuvas 37 kW Sudėtis: Skersinis pavaros konvejeris Žievės šalinimas Konvejeriniai juostiniai transporteriai Išvežimo konvejeris