Pravažiuojantis apdirbimo centras

Hundegger P10

Būklė: naudotas, Gamybos metai: 1994, mašinos/transporto priemonės numeris: 1232, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Oro kondicionierius, ruošinio plotis (maks.): 400 mm, ruošinio aukštis (maks.): 260 mm, bendras aukštis: 2 550 mm, bendras ilgis: 23 000 mm, bendras plotis: 7 200 mm, bendras svoris: 14 000 kg, stalo plotis: 400 mm, oro slėgis: 8 juosta, reikalingas aukštis: 2 550 mm, vietos reikalavimas ilgis: 23 000 mm, reikalingas plotis: 7 200 mm, Sales Description: Hundegger ABM-B P10 Joinery Line + Planer HMC Manufacturer: Hundegger Model: ABM-B P10 incl. HMC Year of Manufacture: 1994 Condition: Used, fully operational Location: Germany Technical Specifications: Working Range: Up to 260 x 400 mm Saw Unit: With block separator and open bottom Milling Units: – Notch milling unit with right/left milling head – Lap joint milling unit with right/left milling head – Finger mill – Vertical milling unit (ø 300 x 100 mm) Drilling Units: – Vertical drilling unit – Horizontal drilling unit – Rafter nail drill Chain Mortiser: – Vertical top/bottom with automatic chain lubrication – Horizontal with combination unit Additional Equipment: – Marking unit at the stop – Positioning chain feed – Horizontal cross conveyor (2.2 m) – Transfer cross conveyor (2.9 m) – Ejector with support stands – Scraper control Included Planer HMC: Year of Manufacture: 1994 – 4 feed motors – 4 planer motors (7.5 kW) – 4 chamfering motors – Automatic centering unit Special Features: – Fully automatic processing of individual and series parts – Control: PC-based with carpenter-friendly graphical display + USB stick as floppy drive (BV transfer) – Inspection under power possible Notes: – All documentation available – Pickup only, ex location, no refurbishment – No warranty or guarantee Gbsdpfxoxrbizj Acysi – Subject to prior sale

Būklė: geras (naudotas), WD gate saw type GXW 71, with pendulum roller bearings on the main shaft. Suitable for all GXV and GXW gate saw base plates. Fully hydraulic, with hydraulic saw tensioner. Ideal as a replacement saw frame or for flywheel exchange. Gedeuql Ilspfx Acysbi

Būklė: naudotas, Gamybos metai: 1994, mašinos/transporto priemonės numeris: 1301, Funkcionalumas: visiškai funkcionalus, Parduodu Hundegger P-10 medienos apdirbimo stakles, skirtas stogo sijų apdirbimui. Staklės visiškai veikia ir vis dar eksploatuojamos, galima demonstracija darbo metu. Didžiausi skerspjūviai: 260 x 400 mm. Pagaminimo metai: 1994. Gbjdpjw I Emkefx Acyei Staklių komplektą sudaro: po stalu montuojamas pjūklas 2 žymėjimo pieštukai dideli frezai 1 pirštinis frezas 2 grąžtai + vinų grąžtas grandininiai obliavimo įrenginiai 2025-06-10 atliktas SERVISAS Pridedama daugybė atsarginių detalių. Daugiau informacijos suteiksiu susisiekus.

Būklė: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, FOR SALE: HUNDEGGER P10 Timber roof construction processing machine. The machine is in good condition and was operational until it was disassembled and transported to its current location, where it is waiting for a new owner. It was replaced due to the arrival of two new machines from the same manufacturer. Gjdpfx Ajwhn A Nocysbi Comes with a significant number of new spare parts that have not been installed. The price is negotiable and open to discussion upon inspection of the machine at its current location.

Gamybos metai: 2023, būklė: naujas, Maximum chipping height: mm 200 Feed width: mm 500 Feed rollers: pcs. 3 Rotor diameter: mm 600 Chipping length approx.: mm 20–30 Output capacity: 16–20 rm/h wood chips Chipping knives: pcs. 2 Feed motors: kW 2x2.2 Net weight approx.: kg 4100 Feed: horizontal Gbodpfx Aconcd Azoyei Machine frame: steel, shielded gas welded Rotor: steel, shielded gas welded, dynamically balanced Bearing: Oversized roller bearings Bearing housing: steel flange housings Feed rollers: steel, specially toothed Chip discharge: below the machine Screen: (sieve) for re-shredding overlength material Drive pulley: matched to main motor N=1500 min-1 Hydraulic system: consisting of hydraulic pump, membrane accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Būklė: geras (naudotas), Gamybos metai: 2011, Fully automatic timber infeed with feed roller conveyor Extension of cross conveyor and feed roller conveyor for timber lengths up to 13 m Infeed and loading cross conveyor Under-table swing cut-off saw Universal 4-axis milling unit (UF4) Combination support for vertically operated tools Drilling unit 2.2 kW Combination support for horizontally operated tools Drilling unit 2.2 kW Longitudinal and cross groove milling machine Rear marking device (on the stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand operation system" Electronic control with EKP software Roller conveyor for timber outfeed incl. extension (without drive) Component ejector 5-arm timber deposit rack Gsdpewuppwsfx Acysbi Safety devices and protective guards

Būklė: labai geros būklės (naudotas), TECNI-ARMENTIA CH-70 Edging Machine – Hydraulic control – Programmable cutting width – Memory for up to 12 programs – Centering table TECHNICAL SPECIFICATIONS: Maximum cutting width: 700 mm Maximum cutting height: 130 mm Main motor power: 55 kW Maximum material width: 830 mm Fixed sleeve length: 300 mm Movable sleeve length: 100 mm Minimum material length: 700 mm Spindle diameter: 65 mm Sleeve diameter: 85 mm Saw blade diameter: 350 – 400 mm Feed speed: stepless hydraulic adjustment Maximum feed speed: up to 38 m/min Infeed table length: 2700 mm Roller width: 700 mm Roller diameter: 140 mm Centering infeed table Two lasers Pump motor power: 4 kW Anti-kickback pawl row Three upper feed rollers Gjdpfx Acsidmptjysbi Three lower feed rollers Hydraulic material hold-down Hydraulic height adjustment Dimensions (L/W/H): 480 / 200 / 230 cm Weight: 4000 kg

Būklė: naujas, Eine einfache Serie von Scherenhubgeräten zur Anbringung an einen Kran zum Heben von Platten mithilfe eines (kundenseitig gestellten) Krans. Tragfähigkeit: 1 Tonne. Minimale Wandplattenhöhe: 2000 mm Maximale Wandplattenhöhe: 3500 mm Gbedpfx Acjfqmtkoyoi Einfache Ein-Mann-Bedienung Eigengewicht des Geräts: 80 kg

Būklė: geras (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, DARBO MATMENYS: 400 x 250 mm. 4 PUSĖS + KAMPO NUPJOVĖJAI Gbodpfx Acsx S E Haoysi

Gamybos metai: 2024, būklė: naujas, • Chopping height: 240 mm • Chopping width: 540 mm • Chopping length: approx. 25–35 mm Gedpfxjnyidbe Acyjbi • Number of chopping knives: 2 • Rotor diameter: 600 mm • Rotor speed: 590 rpm • Feed motors: 4 + 3 kW • Main motor: 45 kW / 55 kW / 75 kW • 6,000 mm infeed conveyor belt • 2,000 mm discharge conveyor belt under the machine