Apvadų apipjaustymo mašina TECNI-ARMENTIA CH-70

TECNI-ARMENTIA CH-70

Būklė: geras (naudotas), WD gate saw type GXW 71, with pendulum roller bearings on the main shaft. Suitable for all GXV and GXW gate saw base plates. Fully hydraulic, with hydraulic saw tensioner. Ideal as a replacement saw frame or for flywheel exchange. Kodpfx Aaeuql Ilsuelr

Būklė: labai geros būklės (naudotas), Storti RM 500 Edger - Italian manufacture - Year of manufacture: 1993 - Electrically adjustable saw blade spacing TECHNICAL SPECIFICATIONS: - Maximum cutting width: 435 mm - Maximum cutting height: 170 mm - Motor power: 2 x 22 kW - Maximum workpiece width: 600 mm - Minimum material length: 800 mm - Maximum blade diameter: 600 mm - Spindle diameter: 40 mm - Two upper feed rolls - One upper pressure roll - Feed roll motor power: 2 x 1.1 kW - Feed rolls with automatic pressure adjustment - Seven lower driven toothed rollers - Electric adjustment of saw blades - Two lasers - Feed speed: 25 and 50 m/min - Infeed table: 2950 mm - Outfeed table: 3000 mm - Drive roller diameter: 100 mm Ksdpfxsk Talps Aauslr - Feed drive motor power: 2 x 1.5 kW Transport dimensions: 500 x 240 x 180 cm Weight: 3500 kg

Būklė: geras (naudotas), Gamybos metai: 2011, Fully automatic timber infeed with feed roller conveyor Extension of cross conveyor and feed roller conveyor for timber lengths up to 13 m Infeed and loading cross conveyor Under-table swing cut-off saw Universal 4-axis milling unit (UF4) Combination support for vertically operated tools Drilling unit 2.2 kW Combination support for horizontally operated tools Drilling unit 2.2 kW Longitudinal and cross groove milling machine Rear marking device (on the stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand operation system" Electronic control with EKP software Roller conveyor for timber outfeed incl. extension (without drive) Kodpfx Aowuppwjauolr Component ejector 5-arm timber deposit rack Safety devices and protective guards

Gamybos metai: 1998, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Very robust gantry roller conveyor with hydraulic lifting and lowering cross conveyor. Part 1: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Height 1,000 mm. Integrated hydraulically operated lifting and lowering cross conveyor with 4 chain strands. Spacings: 1,500 - 1,300 - 1,000 mm. Fully sheeted. Hydraulic support rollers. Driven by geared motor. New bearings. Part 2: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Integrated hydraulically operated lifting and lowering cross conveyor with 6 chain strands. Cantilevered, allowing the sawn goods to be conveyed to the left or right under the roller conveyor. Fully sheeted. Including hydraulic power unit for both roller conveyors. Klodpfxot Hg Hue Aauor

Būklė: naujas, Gamybos metai: 2025,

Būklė: visiškai atnaujintas (naudotas), Pilnai renovuotas Bongioanni CRL 4 veržimo vežimėlis su 4 veržimo blokais. Vėžės plotis 1200 mm. Bėgiai naujai frezuoti. Servo-elektrinė pavara. Pardavimas pagal kliento užsakymą. Klsdsxtwxbopfx Aauor

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, 1 overhauled Paul slat separator, 2-slat design, right fixed slat, left movable slat (for left-handed machine) Total length: 5.50 m Total width: 850 mm Roller spacing: 500 mm Roller width: 790 mm For max. timber length: 5.00 m 8 driven spiral rollers and 3 driven, smooth rollers. 11 rollers removed and fitted with new ball bearings. Movable slat runs smoothly on 4 ball-bearing mounted supports, equipped with a new roller chain and 11 new guide wheels. Sturdy sheet metal lining between all rollers. As-new condition. Klsdpfx Aajtx A Sxsuer

Gamybos metai: 2006, būklė: labai geros būklės (naudotas), Robot Fanuc R-2000iB/210F (E-25677) Year of manufacture: 2006 Klsdjizth Hspfx Aauer Maximum reach: 2655 mm Controller: Fanuc R-J3iC Payload: 210 kg 5 robots available, each equipped with a different tool on the arm.

Būklė: paruoštas naudoti (naudotas), Linia odzysku złomu z następującymi maszynami: Jedna dwutarczowa krajarka krawędziująca do desek Kljdpfogwqk Sox Aausr Jedna jednowrzecionowa piła pozioma rozrzynająca System przenośników pomiędzy maszynami w komplecie.

Būklė: naudotas, Gamybos metai: 1999, galia: 3 kW (4,08 AG), įėjimo įtampa: 400 V, pjovimo aukštis (maks.): 200 mm, pjūklo disko skersmuo: 520 mm, bendras svoris: 350 kg, pjovimo ilgis (maks.): 420 mm, tvirtinimo skersmuo: 50 mm, pjūklo pavara: 3 000 W, No. 04511 Graule ZS 200 N Crosscut and Mitre Circular Saw Used, Year of manufacture: 1999 Saw swivels and tilts 3 kW three-phase brake motor, 400 V Saw blade diameter: 520 mm Blade arbor: 50 mm Cutting height: 200 mm Cutting height at 45° blade tilt: 140 mm Cutting length: 420 mm Table dimensions: 900 x 700 mm (L x W) Aluminium fence Includes machine stand and rear handwheel for tilt adjustment Hydraulic feed brake Pneumatic material clamping from both sides, top-down Saw blade spray unit for coolant or lubricant Carbide-tipped circular saw blade for aluminium and plastics, 520 mm diameter Roller conveyor, type RLK 4000 mm, with fold-away material stop and scale Roller conveyor, 4000 mm long after saw Roller conveyor width: 350 mm Transport dimensions of the machine approximately 1650 x 1200 x 1850 mm (L x W x H), roller conveyors approximately 4500 x 400 x 1950 mm (L x W x H) Weight approx. 350 kg Kodsyh Nfujpfx Aauolr To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale in current condition Technical specifications, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded. Sold as inspected. Terms of payment: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex stock