Būklė: geras (naudotas), Gamybos metai: 1999, X ašies eiga: 3 000 mm, Y ašies eiga: 2 500 mm, Z ašies eigos atstumas: 1 150 mm, Valdymas: Siemens 840 D Powerline Įrankio tvirtinimas: HSK-A63 Maks. sūkių skaičius: 16 000 aps./min X eiga: 3000 mm Y eiga: 2500 mm Z eiga: 1150 mm A ašis: +/- 100 mm C ašis: +/- 181,5 mm Stalo dydis: 3000 mm x 2500 mm Hedpfey Ukrtex Afdsn Pasirinktis: išorinis oro pūtimas Kinematika: šakutės galvutė

Būklė: naudotas, Gamybos metai: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Maximum clearance between columns: 3,000 mm Maximum clearance height: 1,950 mm Maximum distance from spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Main spindle speed range: up to 18,000 rpm Main spindle drive power: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Type P 8002320/00-4 Main spindle speed range: 20 - 5,000 rpm Main spindle drive power: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Table clamping surface: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool positions: 327 pcs. Number of tool positions HSK A63: 156 pcs. Number of tool positions HSK A100: 171 pcs. Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total connected load: 150 kVA Space requirement approx. 25.0 x 12.0 x 7.0 m 5-Axis Gantry Large Machining Center Hsdjvy Ihdopfx Afdsn DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools subject to agreement

Būklė: naudotas, Gamybos metai: 2018, Are you looking for a gantry milling machine? With X-axis travel ranging from 2 to 15 meters, Y-axis travel up to 4 meters, and Z-axis travel up to 2 meters, we offer you a versatile selection of machines to meet various machining requirements. Whether you need CNC universal heads, W-axis, rotary tables, tool changers, or controls from renowned manufacturers such as Siemens, Fanuc, and Heidenhain, our comprehensive range of accessories gives you maximum flexibility and efficiency. Take a look at the PDF catalogue below! Discover the ultimate precision and robustness of our refurbished CORREA gantry mills, carefully overhauled by our experts in Spain. These machines have been inspected to the highest standards and guarantee you top-quality machining performance. A prime example is our in-stock used CNC gantry milling machine VM 2018, equipped with the proven Heidenhain control system. With impressive performance data and detailed technical features, this machine offers everything you need for precise and efficient machining. x-axis travel: 2,300 mm y-axis travel: 2,000 mm z-axis travel: 1,000 mm table size: 2,300 x 1,600 mm T-slots (width x spacing x number): 8 x 22 x 180 mm max. table load: 8 t distance between columns: 1,840 mm distance spindle nose to table: 180 ~ 1,180 mm spindle motor: 22/46 kW torque at the spindle: 140.1/286.5 Nm (S6-25%) spindle taper: SK 50 spindle speed: 10,000 rpm (direct drive) rapid traverse X, Y: 20,000 mm/min rapid traverse Z-axis: 15,000 mm/min milling feed range: 1~10,000 mm/min machine size (L x W x H): 7,027 x 5,217 x 4,339 mm total power requirement: 60 kVA machine weight approx.: 25 t CNC control: Heidenhain TNC 620 chip conveyor with chip bins: 2 spiral type, 1 hinged belt type Hjdpfxohx R Dks Afdjn internal coolant supply (IKZ): 20 bar CE compliant: certified by TÜV Used CNC gantry milling machine with HEIDENHAIN 620 TNC control, extensive accessories, and the following features: - Monoblock cast iron machine bed and monoblock cross beam provide maximum rigidity for precise machining results. - The entire structure has been FEM analyzed to optimize both rigidity and precision. - P-class linear guideways with feed rollers allow for maximum loading with a low friction coefficient (0.003-0.006), ensuring smooth operation through optimized roller recirculation and guidance, which also reduces energy consumption. - Double-nut C3 ball screws ensure precise milling even under heavy loads. - Direct-drive spindle with 10,000 rpm, SK50 tool holder. - Spindle motor power 22/46 kW (S6-25%), delivering 22 kW continuous power and up to 46 kW for a 30-minute overload period. - Spindle torque of 140.1/286.5 Nm (S6-25%). - Two spiral conveyor and one hinged belt chip conveyor for effective chip removal. All major components are sourced from renowned European manufacturers, ensuring a reliable, rapid, and long-term supply of spare parts. Don’t miss the opportunity to optimize your production processes and invest in high-quality milling technology. Experience the difference our gantry milling machines make—reliable, durable, and ready to take on your most demanding tasks. Contact us today and let our experts advise you. Further stock machines available on request.

Gamybos metai: 2018, būklė: naudotas, x-travel: 1600 mm y-travel: 1300 mm z-travel: 700 mm Distance between columns: 1500 mm Distance spindle center to table: 225-925 mm Table size: 1800 x 1300 mm Table load: 4000 kg T-slots (Width x Pitch x Quantity): 22 x 160 x 8 mm Spindle taper: HSK-A 63 Hodpehx R Dvjfx Afden Spindle speed: 24,000 rpm Spindle motor: 25/33 kW Spindle motor torque: 72.6/95.8 N.m. Rapid traverse in X-Y-Z axes: 30,000 mm/min Feed rates X/Y/Z axis: 1~20,000 mm/min Tool changer: 20 positions Max. tool diameter: 100/130 mm Max. tool length: 300 mm Max. tool weight: 8 kg Total power requirement: 80 kVA Machine weight approximately: 22 t Machine dimensions (LxWxH): 5660 x 5295 x 3930 mm CNC control: Heidenhain TNC 620 Spindle: IBAG electric spindle 24,000 rpm HSK-A 63 Glass scales: Heidenhain Tool changer: 20 positions Chip conveyor - spiral: 2 units Used CNC high-speed gantry milling machine with extensive accessories at a special introductory price. Key component manufacturers for this stock machine include: · Controller and servomotors: Heidenhain, Type TNC 620 · Ball screw bearings: Japan NSK · X-axis ball screw: Taiwan Hiwin · Y-axis ball screw: Taiwan Hiwin · Z-axis ball screw: Taiwan Hiwin · 3-axis linear guideways: Japan THK or Germany Rexroth · Electric spindle unit: HSK A63-24,000 rpm by IBAG · Linear encoders: Heidenhain · Pneumatic system: Japan SMC · Lubrication: Japan Showa · Covers: Hema · Air conditioning: Taiwan Kaokung · Spindle water cooler: Taiwan-Punkt · 3-axis cable drag chain: Germany Igus · Coupling: Germany KTR · Machine enclosure: Germany Mecano · Relays: Omron · Electrical systems: Germany Schneider · MPG handwheel: Japan Tosoku For more information about the machine, standard accessories, and special accessories, please refer to the attached documentation. Of course, we are also happy to organize delivery to your location including assembly/commissioning, handover ready for operation, as well as operator training.

Būklė: naudotas, Gamybos metai: 2018, X ašies eiga: 2 300 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 1 000 mm, stalo ilgis: 2 300 mm, stalo plotis: 1 600 mm, veleno greitis (maks.): 10 000 aps./min, veleno nosis: SK 50, Used CNC Gantry Milling Machine KRAFT VM-2018B with Heidenhain TNC 620 Year of manufacture: 2018 Location: Germany Delivery time: short notice Payment: 100% before loading Warranty: none Machine Description The KRAFT VM-2018B is a precise and high-performance CNC gantry milling machine equipped with HEIDENHAIN TNC 620 control, ideal for heavy-duty and high-precision machining tasks. Thanks to its robust construction and high-quality components, it is perfectly suited for demanding milling applications in tool and mold making as well as for series production. Highlights & Features - Monoblock cast iron bed and crossbeam for maximum rigidity and precision - FEM-optimized machine design - BF gearbox with 26 kW motor for high torque (662 Nm) - P-class linear feed guides (very low friction coefficient 0.003–0.006) - C3 ball screws with double nut – high load capacity & accuracy - Spindle: SK50, 10,000 rpm, directly driven - Heidenhain TNC 620 control - Spindle cooling & ICS 20 bar - Coolant system, oil separator, air conditioning for control cabinet - Full enclosure, TÜV-certified, CE-compliant Technical Data - Travels (X/Y/Z): 2,300 / 2,000 / 1,000 mm - Table size: 2,300 × 1,600 mm - T-slots: 8 × 22 × 180 mm - Max. table load: 8 t - Distance spindle nose – table: 180–1,180 mm - Rapid traverse X/Y: 20,000 mm/min - Rapid traverse Z: 15,000 mm/min - Feed rate range: 1–10,000 mm/min - Positioning accuracy (VDI/DGQ3441): 0.020 mm - Repeatability (VDI/DGQ3441): 0.015 mm - Machine dimensions (L×W×H): 7,027 × 5,217 × 4,339 mm - Machine weight: approx. 25 t - Total connected load: 60 kVA Additional Equipment & Accessories - 2 spiral chip conveyors, 1 chain chip conveyor - Chip bin, work light, 3-color signal light Hsdpfswkg T Ssx Afden - Portable handwheel, cooling system, tool box - Automatic lubrication, pneumatic unit - Water/air gun, transformer - Foundation wedges, anchor bolts, door lock - Technical documentation in German - Rigid tapping, spindle air cleaning - Option: various manual and CNC milling heads Performance Meets Efficiency This gantry milling machine not only offers power and precision, but also impresses with a sophisticated design featuring energy-efficient technology, reliable branded components (including NSK, Fanuc) and comprehensive serviceability. Financing available: Upon request, we offer attractive leasing and hire-purchase models. Optional: Delivery to site, installation, commissioning and training – just ask us!

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Discover our selection of robust and precise bed-type milling machines! Are you looking for a reliable bed milling machine to boost your productivity? Experience unmatched precision and performance with our new and overhauled bed-type milling machines. Our machines offer X-axis travels from 1,500 to 5,000 mm and are available with Heidenhain or Siemens controls. With Y and Z travels up to 1,200 mm, you have limitless possibilities. Some overhauled machines are in stock and available at short notice! Explore our extensive range of special accessories, such as universal milling heads, tool changers, and much more to further enhance the versatility of your bed milling machine. Whether for complex workpieces or demanding tasks, our machines consistently deliver the best results. Rely on our many years of experience and let’s optimize your machining processes together. Invest in quality and precision—contact us today! Below you will find a selection of possible machine types; we are also happy to offer additional models or special machines upon request: MAIN TECHNICAL DATA: BFM series including BAFA grants starting from 15% or more! - X-axis travel 1,500–5,000 mm - Y-axis travel 1,000 mm - Z-axis travel 950 mm (up to 1,500 mm optional) - Max. table load 5,000 kg - Spindle taper SK 50 Hjdpfxspwn Hhe Afdjn - Spindle speed 3,500 rpm (5,000 rpm optional) - Spindle drive 15/18.5 kW (22/26 kW optional) ACCESSORIES: Manual universal head, Siemens or Heidenhain control, linear scales on X-Y-Z axes, chip conveyor (screw type front/rear) and much more. Comprehensive special accessories available on request to further enhance productivity: CURRENTLY AVAILABLE OVERHAULED MACHINES with warranty and BAFA funding, e.g. - CORREA CF17D: HEIDENHAIN TNC-426, travels (X/Y/Z): 2,000 / 800 / 800 mm, manual milling head, and more. - CORREA CF25/25: HEIDENHAIN TNC-530, travels (X/Y/Z): 2,500 / 1,000 / 1,500 mm, automatic universal head UAD (0.1º increments), 6,000 rpm, and more. - CORREA CF25/25: HEIDENHAIN TNC-426, travels (X/Y/Z): 2,500 / 1,000 / 1,000 mm, automatic indexing differential head UAD (0.1º increments), 6,000 rpm, automatic tool changer (30 tools), and more. - CORREA PRISMA: HEIDENHAIN TNC-530, travels (X/Y/Z): 2,500 / 1,000 / 1,000 mm, automatic indexing milling head UDG40 (2.5º increments), and more. - CORREA CF22/25: HEIDENHAIN TNC-426, travels (X/Y/Z): 2,500 / 800 / 800 mm, manual milling head, and more. - NICOLAS CORREA A30/30: HEIDENHAIN TNC-426, travels (X/Y/Z): 3,000 / 1,200 / 1,000 mm, extended manual milling head (UL40), and more. - CORREA A30/30: HEIDENHAIN TNC-426, travels (X/Y/Z): 3,000 / 1,200 / 1,000 mm, universal milling head with automatic indexing UDG (2.5º increments), automatic tool changer (ATC30), and more. Further models available from stock or at short notice. Contact us now and discover the world of innovative bed milling technology! Our service for you: • On-site consultation and solution finding • Organization of machine transport to your facility • Placement, installation, commissioning, and hand-over ready for operation • Financing and assessment of grant opportunities with KFW, BAFA, and more.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Milling machine in working condition, fully operational and in good overall state – used sparingly in an in-house mechanical workshop. Technical specifications: Working system and travels (XYZ axes) • Table surface: 1600 × 400 mm (extended versions available: 1800/2000 mm × 400 mm) • Travel in X axis (longitudinal): 1120 mm • Travel in Y axis (cross): 400 mm • Travel in Z axis (vertical): 430 mm (mechanical travel 400–410 mm) • Maximum table load: 1500 kg • Number of T-slots: 5 slots, 18 mm width, spaced 63 mm apart Spindle and milling head • Spindle taper: ISO 50 / SK 50 • Spindle speed range: 28 – 1400 rpm (standard 18-step adjustment) • Quill stroke: 100 mm • Vertical head swivel: ±45° right/left Hsdpfx Afoy Sgfdsdon • Distance spindle axis to column: 450 mm • Distance spindle nose to table: min. 70–100 mm / max. 500 mm Feed range • Feed in X and Y axes: 16 – 800 mm/min (18-step adjustment) • Feed in Z axis: 5 – 250 mm/min (18-step adjustment) • Rapid feed speed (X/Y): 3150 mm/min • Rapid feed speed (Z): 1000 mm/min Motors and electrical supply • Main spindle motor power: 11 kW • Total power requirement: approx. 14.5 kW Dimensions and total weight • Machine weight: approx. 4000 kg • Working width / span: approx. 2000 mm • Working depth: approx. 1700 mm (with full table travel: approx. 2900–3500 mm) • Machine height: approx. 2700 mm Standard features and equipment • Mechanical/automatic tool clamping: enables quick tool change in the ISO 50 taper without manual force. • Centralized lubrication system: automatic oil supply to sliding guides.

Būklė: naudotas, Gamybos metai: 1986, x-axis travel 390/410 mm y-axis travel 290/310 mm z-axis travel 380/400 mm Total power requirement 4 kW Machine weight approx. 1.25 t Required space approx. 2100x2100x1700 mm For technical data, see attachment Hodjvylkcepfx Afden

Būklė: naudotas, Gamybos metai: 2016, x-axis travel: 4,500 mm y-axis travel: 1,300 mm z-axis travel: 1,800 (2,300) mm Control unit: iTNC 530 HSCI Heidenhain Tool holder: ISO 50 DIN 69871 AD Spindle speeds: 20 - 6,000 rpm Spindle motor power: 43 kW Torque: 900 Nm Clamping area of table: 6,000 x 1,100 mm T-slots: 6x 22 H12 mm Reference T-slot: 1x 22 H7 mm T-slot spacing: 140 mm Number of tool stations: 40 pos. Tool holder: ISO 50 DIN 69871 Max. tool diameter: 125 mm Hodpfx Aey Umagsfdon Max. tool diameter with free adjacent space: 250 mm Max. tool length: 400 mm Max. tool weight: 20 kg Tool change time: 10 s Rapid traverse (X / Y / Z): 35,000 mm/min Feed force (X / Y / Z): 16,000 N Acceleration X: 1 | Y: 1.5 | Z: 2 m/s² Total connected load: 57 kW CNC fixed-bed milling and boring center SORALUCE - SLP 6000 - Automatically indexing milling head with 0.001° x 0.001° increments in two planes - Tool clamping force: 20,000 N - Prepared for "Dynamics Active Stabilizer" - Dynamic Collision Monitoring software (DCM) - Interpolated turning - INA linear roller guide system RUE55-E-L (X/Y/Z axes) - Hydromechanical damping slideways (Y/Z axes) - Rack and pinion drive (X axis) - Ball screw drives (Y/Z axes) - Heidenhain AC drive motors with digital drive technology - Vented direct linear measurement system Heidenhain - 3D thermal expansion compensation for all milling head positions - Automatic feed control - Increased accuracy via Soraluce 3D milling head compensation - Prepared for NC rotary table for 5-sided machining - Tool changer operation for loading and unloading during automatic mode - Adaptive Control - Accura Heads option - DXF converter - Interpolated turning Heidenhain - Splash guard enclosure (2x front doors, 2,500 mm each)

Būklė: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Techniniai duomenys X eiga: 4000 mm Y eiga: 1350 mm Z eiga (vertikali): 1600 mm Valdymas: Heidenhain iTNC 530 Stalo paviršius: 4200 x 1150 mm Stalo apkrova: 13 t Įrankio laikiklis: ISO 50 Veleno apsukos (be pakopų): 0–3000 aps./min Pavarų pakopos: 2 Veleno pavara: 28/38 kW Pavaros diapazonas: 5000 mm/min Greitas padavimas (X/Y): 12 m/min Greitas padavimas (Z): 10 m/min Apytikris mašinos svoris: 37 t Užimama vieta apie: 12,9 x 6,53 x 3,79 m Papildoma informacija Frezos galva buvo kapitališkai suremontuota 2025 m. sausį ir spalį už 51 000 eurų (nauji kūginiai krumpliaračiai ir guoliai). Darbo valandos (2025-07-31): Mašina įjungta: 38 483 h Programos eiga: 12 798 h Veleno darbo laikas: 11 645 h Galiojantis geometrijos matavimo protokolas yra. * CNC valdymas HEIDENHAIN iTNC 530 * Elektroninis rankenėlė (rankinis ratukas) * 50 pozicijų įrankių keitiklis Hjdpfezaan Tox Afdsn * Valdoma universali frezos galva, indekso padėtis 2,5°/2,5° * Aušinimo sistema * Aušinimas per veleną (IKZ) * Alyvos aušintuvas * 2 drožlių transporteriai * Belaidis matavimo zondas * Mašinos dokumentacija

Būklė: geras (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Techniniai duomenys x eiga: 620 mm y eiga: 420 mm z eiga: 400 mm Valdymas: Heidenhain TNC 410M Stalo plotas: 800 x 400 mm Įrankio tvirtinimas: ISO 40 Pagrindinio veleno apsukos (be pakopų): 50 - 4000 aps./min Pagrindinio variklio galia: 5,5 kW Bendras galios poreikis: kW Staklių svoris apie: 2,1 t Reikalinga vieta apie: m Hodpjzaakbsfx Afdsn Papildoma informacija * CNC valdymas HEIDENHAIN TNC 410M * Aušinimo skysčio įranga * Staklių apšvietimas

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Techniniai duomenys x eiga 300 mm y eiga 160 mm z eiga 290 mm Stalo matmenys 600 x 210 mm Įrankio laikiklis SK 40 Veleno apsūkų diapazonas (16) 40 - 2000 aps./min Begaliniai padavimai 5 - 500 mm/min Greitas padavimas 1,2 m/min Veleno pavara 1,5 / 1,9 kW Bendras galios poreikis 9,5 kVA Staklių svoris apie 830 kg Reikalinga vieta apie 2000 x 2200 x 1655 mm Papildoma informacija Staklės labai geros būklės, atvežtos iš mokymo dirbtuvių. Komplektacija: * 3 ašių pozicionavimo valdymas su aktyviu skaitmeniniu ekranu Heidenhain TNC 123 - Rankinis režimas: valdymas rankiniu būdu ir pozicionavimas su rankiniu įvedimu - Automatinis režimas: atskirų eilučių programavimas, programų įrašymas * Fiksuotas kampinis stalas * Perstumiama vertikali frezavimo galva, posvyrio kampas +/- 90°, pinolės eiga 60 mm * Aušinimo skysčio įranga * Centrinis tepimas * Atrama su priešingu guoliu Hedsy U U Nispfx Afden * Antivibracinės kojos * Dokumentacija

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Maho MH 500 C, CNC Philips 432 Path Control, and Accessories from Training Workshop – Excellent Condition! Technical Data: >> Year of manufacture: approx. 1985 >> Path control: CNC Philips 432 >> Spindle speed up to 4,000 rpm >> Total connected load: 24 kVA >> Travel (X/Y/Z): 500/400/300 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 2,000 kg >> Space requirements: approx. 2.6 m x 2.2 m, height 1.9 m Accessories and Equipment: >> Path control: CNC Philips 432 >> Hydraulic clamping vertical and horizontal >> Central lubrication Hedpfjzaaq Usx Afden >> Electronic handwheel >> Coolant system >> Tool cabinet with accessories: vice, tool holders, clamping tools, collets, ground parallels, and much more Complete documentation, machine card, operating manual, electrical diagrams, etc. About the Machine: Offered for sale is a Maho MH 500C universal milling machine with Philips 432 path control in very good condition. Each axis features a continuously variable drive system, comprising a responsive drive motor and a backlash-free ballscrew. Various machining cycles, such as circular pockets, rectangular pockets, slot milling, drilling, deep hole drilling, and thread cutting, allow for easy operation of the Maho. The milling machine was operated in a training workshop. Additionally, the machine offers hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal milling is very straightforward by simply swiveling away the vertical head. Take advantage of the opportunity to inspect and test the Maho under power on site.

Būklė: geras (naudotas), Gamybos metai: 1986, Universal milling machine Manufacturer: KUNZMANN Type: UF 6 / 3 Year: 1986 with Heidenhain digital readout Hodpfx Aeich Dvjfdjn Spindle mount: ISO 40 horizontal and vertical Spindle speeds: 50 - 2150 rpm Infinitely variable feeds: 0 - 1000 mm/min on X / Y axes and Z axis 0 - 250 mm/min Rapid traverse: 2000 mm/min on X / Y axes and 500 mm/min on Z axis Table size: 860 mm x 265 mm, swivels +/- 45 degrees Counter bearing, 2 arbors for horizontal milling included. Machine documentation available. Good condition. Ready for demonstration.

Būklė: geras (naudotas), Gamybos metai: 2001, CNC bed-type milling machine, manufacturer IBERIMEX-MVR Model: UH-1250, year of manufacture 2001 Control system: Heidenhain TNC124 Travels: X-axis 1250 mm, Y-axis 500 mm, Z-axis 460 mm Hsdpfx Asd Eranofdjn Clamping table: 360 mm x 1800 mm Spindle taper: ISO50 The machine is equipped with full enclosure. For further technical details, please refer to the machine data sheet. The machine is in good condition.

Būklė: geras (naudotas), Gamybos metai: 1995, Universali frezavimo staklė AUERBACH, tipas 315 FUW, pagaminta 1995 m. Su 3 ašių skaitmeniniu indikatoriumi HEIDENHAIN, hidrauliniu įrankių užspaudimu, mašininiu spaustuvu, įrankių laikikliu, atrama horizontaliojo frezavimo darbams, aušinimo įranga. Mašinos dokumentacija geros būklės. Darbo eiga: X 500 mm, Y 400 mm, Z 330 mm Hedpfx Aov Dab Dofdjn Stalas: 400 mm x 700 mm Įrankio tvirtinimas: ISO 40 Veleno apsukos: 20–3000 aps./min Greitas poslinkis: X / Y / Z. Daugiau duomenų žiūrėkite duomenų lape.

Būklė: geras (naudotas), Gamybos metai: 1988, CNC Milling Machine Manufacturer: MAHO Type: MH 500 W Year: 1988 Control: Heidenhain TNC 232 B Equipped with counter bearing for horizontal milling. Spindle taper: ISO 40 Infinitely variable spindle speeds: 20 - 4000 rpm Feeds: 1-3000 mm/min Travels: X 500 mm, Y 380 mm, Z 350 mm Table size: 700 mm x 350 mm Weight: approx. 2,000 kg Hsdpfx Aoich Ehofdsn Machine documentation available The machine is ready for demonstration.

Būklė: naudotas, Gamybos metai: 1975, Universalioji frezavimo staklė MAHO MH800, pagaminta apie 1975 m. Veleno tvirtinimas ISO 40 Hjdpfoyvr Eqex Afden X – 800 mm su universaliu stalu. Y ašyje padavimo funkcija neveikia? Svoris apie 3 t. Yra visos staklių dokumentacijos.

Būklė: geras (naudotas), Gamybos metai: 1990, CNC universal milling machine, manufacturer MAHO MH600-C, control system MAHO 432, with universal clamping table. Spindle taper: ISO 40 Travel paths: X 600 mm / Y 400 mm / Z 500 mm Spindle speeds up to 2,000 rpm Equipped with a working area enclosure Machine documentation available. Machine from a toolmaking facility, in good and clean overall condition. Hedourcybepfx Afden Can be demonstrated under power.

Būklė: geras (naudotas), Gamybos metai: 1993, CNC universal milling machine DMG MORI Type: MH 600 C Control: MAHO 532, year of manufacture: 1993. Equipped with automatic swivel milling head G17/G18 and B-axis rotary table. Without tool changer. Hedoiihxhjpfx Afdjn For further data, please refer to the technical data sheet. Complete machine documentation and data backup available. Good general condition.

Gamybos metai: 1990, būklė: geras (naudotas), Various collets and holders, approx. 300 pieces. For DECKEL milling machines FP1 - FP2 - FP3 - FP4. Individual sale upon request. Hedpehvz Iiofx Afdjn

Būklė: geras (naudotas), Gamybos metai: 1990, CNC Universal Milling Machine, Manufacturer: MAHO Model: MH 500 W Control: MAHO 432 Spindle Taper: ISO 40 Spindle Speeds: 20 – 4,000 rpm Travels: X 500 mm / Y 380 mm / Z 350 mm Table Load Capacity: 250 kg Hodpfx Ajr Igv Rofdjn The machine is in good condition, coming from a toolmaking facility. Machine dimensions: Width 1,500 mm / Depth 2,000 mm / Height 1,800 mm / Weight: 2,100 kg Machine documentation available, machine under power and can be demonstrated.

Būklė: geras (naudotas), Gamybos metai: 1986, CNC universal milling machine Manufacturer: DECKEL Type: FP5NC Year: 1986 Control: DIALOG 4 Hodpfx Afedtdahsdon For spare parts only. Please inquire specifying the parts you need.

Būklė: geras (naudotas), Gamybos metai: 1988, CNC Universal Console Milling Machine, Manufacturer: KLOPP, Type: FWS15, Year: 1988 CNC contouring control: Heidenhain TNC 155. Travel distances: X: 1170 mm, Y: 420 mm, Z: 420 mm Clamping table: 1500 x 400 mm Spindle taper: SK50 Spindle power: 15 kW Spindle speeds: 35–3550 rpm Counter bearing for horizontal milling Coolant system, chip tray, Various tool holders Complete machine documentation. Machine is immediately ready for operation Workshop tested. New parameters and batteries installed on 20.08.2020. Hsdpfxsbu Em Aj Afdon Good overall condition. Machine can be demonstrated under power.

Būklė: geras (naudotas), Gamybos metai: 2003, Vertikali frezavimo staklės UNITECH tipas: FSS 315-S7, pagaminta 2003 m. Su 3 ašių skaitmeniniu indikatoriumi ACU-RITE Hidraulinis įrankio tvirtinimas, lygiagretaus frezavimo įranga, aušinimo skysčio sistema. Eigos: X 1000 mm, Y 355 mm, Z 505 mm Stalas: 315 mm x 1250 mm Veleno tvirtinimas: ISO 50 Hedpjv A Trasfx Afdsn Veleno apsukos: 28 - 2240 aps./min. Staklės geros būklės, yra dokumentacija. Daugiau duomenų – žr. techninius duomenis.