Frezuotos staklės - universalios NC/CNC 400–499 mm x eiga pirkti naudotą (49)

Sąlyga: naudotas, Parduodu nuotraukose matomą vokiškos gamybos Deckel FP3A modelio įrankinę frezavimo staklę. Staklė gali dirbti rankiniu, pusiau automatiniu ir automatiniu režimu. Valdymas G kodais. Valdymo tipas: CNC 2102 Deckel. Hfedpfjxluu Rjx Acusn

Sąlyga: geras (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2803-2693, X ašies eiga: 400 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 6 300 aps./min, veleno greitis (min.): 32 aps./min, plunksnos brūkšnys: 80 mm, šilko eigos atstumas: 80 mm, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, For sale is a precise and robust Friedrich Deckel FP3NC tool milling machine, year of manufacture 1985, equipped with Dialog 4 CNC control. This machine is German-made and is suitable both for tool and mold making as well as for precise one-off and small-batch production. Technical Data (excerpt) Model: FP3NC Control: Deckel Dialog 4 Year of manufacture: 1985 Serial number: 12767 Spindle motor power: 2.0 / 3.0 kW, pole-switchable three-phase brake motor Spindle speeds: 31.5 – 6300 rpm (2 ranges, manually switchable) Tool holder: SK 40 Hedpfx Asxlghpocujfn Quill stroke (manual): 80 / 80 mm (horizontal/vertical) Traverse paths: X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Feed rate: 2 – 3600 mm/min Rapid traverse: 4000 mm/min Table T-slots: 4 slots, 14H7, spacing 63 mm Total weight: approx. 1800 kg Electrical connection: 380 V, 50/60 Hz, connected load 14.5 kVA Rated current: 22 A Control voltage: 24 V Equipment & Control 4-axis contouring operation with dialog-guided input 3D linear and circular interpolation, helical interpolation, polar coordinates Numerous drilling and milling cycles, graphical cycle input support Milling cycle "pocket contour" for pocket machining (including irregular pockets with islands) Subroutine programming, program memory up to 512 kByte Tool compensation for up to 100 tools Interfaces for cassette recorder, punched tape reader, floppy disk, or Winchester hard drive (DNC-capable) Condition & Features Machine is fully operational Precise, stable construction – ideal for workshops, training, or production Operating manual and technical documentation available Viewing by appointment possible

Sąlyga: naudotas, Gamybos metai: 1992, Vertical and Horizontal Milling Machine Hedpfx Acewncwheuefn Make: EUMEGA Model: MDV5 Year: 1992 Technical specifications: Manufacturer: Eumega Model: MDV5 Year of manufacture: 1992 Table size: approx. 305 x 1270 mm X-travel: approx. 460 mm Y-travel: approx. 500 mm Z-travel: approx. 610 mm Spindle speed: variable Tool holder: SK 40 Total power: 3.75 kW Dimensions (W x D x H): 1200 x 1100 x 1800 mm Weight: approx. 2.6 t All information is provided without guarantee. A demonstration is possible at any time in our showroom.

Gamybos metai: 1994, Sąlyga: labai geros būklės (naudotas), Deckel milling machine FP 2A with Dialog 12 control + vise Hfjdefgmbdjpfx Acujn

Sąlyga: naudotas, Gamybos metai: 1984, X eiga 410 mm y eiga 310 mm z eiga 400 mm Stalo dydis 700 x 280 mm Valdymas: Heidenhain TNC 145 Tvirtinimas SK40 Sūkių diapazonas 40–2000 aps./min Greitasis poslinkis 1,5 m/min Pjovimo eiga 1500 mm/min Pavaros galia 2,2 kW Hodpfx Acsxlufpeusfn Špindelio eiga 63 mm Svoris 1,3 t Bendras galios poreikis 2,2 kW Apytikslis mašinos svoris 1,5 t Išmatavimai I x P x A: 1,4 x 2,1 x 2,0 m Komplektacija: - Naujas TFT ekranas - Aušinimo sistema - Hidraulinis įrankių tvirtinimas - Frezavimo galva su ištraukiamu špindeliu - Dokumentacija

Sąlyga: geras (naudotas), Gamybos metai: 2008, padavimo ilgis X ašis: 400 mm, padavimo eiga Y ašimi: 250 mm, padavimo ilgis Z ašis: 400 mm, Heidenhain TNC 124 control Quill electronic handwheel coolant system Technical data: Longitudinal travel (X-axis): 400 mm Cross travel (Y-axis): 250 mm Vertical travel (Z-axis): 400 mm Table clamping area: 600 x 320 mm Spindle taper: SK40 Spindle speed range: 30–6300 rpm Feed X, Y, Z: 10, 10, 8 m/min Total drive capacity: 6.5 kW Hfodpfx Acerb A Tcousn Weight approx.: 1200 kg Technical data, accessories and descriptions of the machine are non-binding.

Sąlyga: naudotas, Gamybos metai: 1988, X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Quill stroke: 80 mm Table size: 1000 x 400 mm Spindle speeds: 20 - 3000 rpm Spindle taper: SK 40 Feeds – automatic programming: 1 - 4000 mm/min Rapid traverse: 6 m/min Control: Philips 432 Hsdpou Rt I Iefx Acujfn Drive power: 12 kW Total power requirement: 15 kW CNC control: Philips 432, swivelling vertical head, coolant pump, hydraulic tool clamping, automatic central lubrication, machine lamp, chip collection tray with splash guard enclosure.

Sąlyga: naudotas, Gamybos metai: 2008, X eiga 400 mm Y eiga 300 mm Z eiga 400 mm Veleno laikiklis ISO 40 Veleno sukimosi greitis 40–2.000 aps./min Stalo dydis 750 x 320 mm Begaliniai pastūmos greičiai 10–380 mm/min Greitasis pastūma 1.200 mm/min Pavaros galia 2,2 kW Veržlės eiga 80 mm Maitinimo įtampa 400 V Bendras galios poreikis 4,7 kW Staklių svoris apie 1,1 t Hedpfxoxa Hf Re Acuefn Reikalinga erdvė apie 1,15 x 1,40 x 1,85 m - Gamyklos Nr.: 148373 - 3 ašių skaitmeninis indikatorius - Horizontalus frezavimo įrenginys - Frezavimo galvutė pasukama ±45° - Aušinimo sistema

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2019, veikimo valandos: 40 h, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 450 mm, padavimo eiga Y ašimi: 350 mm, padavimo ilgis Z ašis: 400 mm, veleno greitis (maks.): 5 000 aps./min, šilko eigos atstumas: 80 mm, greitas poslinkis X ašimi: 5 m/min, greitas poslinkis Y ašis: 5 m/min, greitasis eiga Z ašyje: 5 m/min, bendras aukštis: 1 990 mm, bendras plotis: 2 030 mm, bendras ilgis: 1 980 mm, stalo plotis: 270 mm, stalo ilgis: 400 mm, įvesties srovės tipas: trifazis, sukimosi greitis (maks.): 5 000 aps./min, sukimosi greitis (min.): 10 aps./min, stalo apkrova: 450 kg, bendras svoris: 2 270 kg, įėjimo įtampa: 400 V, ruošinio svoris (maks.): 450 kg, garantijos trukmė: 24 mėnesiai, įėjimo srovė: 16 A, įėjimo dažnis: 50 Hz, Įranga: CE žymėjimas, dokumentacija / vadovas, sūkių greitis be galo kintamas, Immediately available stock machine from our showroom in Trencin (SK). (Sale reserved.) EMCOMAT FB 450 with Siemens Sinumerik 828D control system. DEMO machine in "AS NEW" condition, available immediately. (Sale reserved.) We will be happy to prepare an individual offer for you. Visit us to inspect and test the machine under power. Working range X450/Y350/Z400 mm Table size 800 x 400 mm Drive power 7/10 kW Variable spindle speed 10–5000 rpm SIEMENS Sinumerik 828D Universal toolroom milling and drilling machine equipped with a modern Sinumerik 828D system and hydraulic tool clamping. Working range X450/Y350/Z400 mm Drive power 7/10 kW Spindle speed 10–5000 rpm Feed rate 10–2000 mm/min Rapid traverse up to 5000 mm/min Machine accuracy according to DIN 8615 Tool clamping DIN 69871 SK40 Includes: - Linear guides - Ball screws - Vertical milling head swivels +/-90° with quill travel 80 mm - Swiveling device for vertical head - Hydraulic tool clamping - Coolant system - LED machine lighting - Fixed angle table 800x400 mm - Chip tray - Automatic central lubrication - Service tools - Documentation in Czech and English - Sinumerik 828D interface in Czech, German, and English - 15" multi-touch display - Control package for 3 axes with ball screws and servo motors - Machining cycles with graphic support: - Drilling, deep drilling, reaming - Thread cutting (with length compensation) on bolt circles and linear hole patterns - Rectangular and circular pockets - Slotting cycle - Calculation cycle - etc. Hfodpfx Acoxapdcousn - USB interface

Sąlyga: naudotas, Gamybos metai: 2001, X-travel 400 mm Y-travel 250 mm Z-travel 400 mm Tool holder ISO 40 Spindle speeds 30–6,300 / 20–4,200 rpm Feed rates 0 – 10,000 mm/min Quill stroke 90.0 mm Table size 600 x 320 mm T-slots 5 x 14 x 63 mm Control TNC 410 CA Spindle run time ~ 126 hrs Motor power 11.0 kW Weight 1,300 kg Floor space approx. 1,600 x 1,500 x 1,900 mm Original price incl. special accessories ~ €72,000 Machine was very rarely used (!!) with only approx. 126 spindle hours (spindle on) Equipment: - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC contouring control TNC 410 CA * shop-floor oriented contouring control, * easy-to-understand conversational programming * HEIDENHAIN electronic remote control with handwheel - Swiveling operator panel, positioned on the right side of the machine - Hydraulic tool clamping (pull studs to DIN 69872-A) - Double-sided swiveling vertical milling head – ISO 40 - Stepless vertical spindle speed range .. 30–6,300 rpm - Stepless horizontal spindle speed range .. 20–4,200 rpm - Rugged, rigid angle table with 5 T-slots - Coolant system with tray - Chip splash guard enclosure - Operating manual + electrical schematics for machine Special accessories included: - 1x pneumatic clamping plate, with unit - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice – HILMA RÖMHELD Type SM 100 - large selection of tool holders Hfjdpfxsxab T Ao Acujn - machine leveling feet * Machine video: ?v=3dqLbTme81E

Gamybos metai: 1993, veikimo valandos: 13 924 h, Sąlyga: labai geros būklės (naudotas), x-400, y-330, z-350, tilting table 630x335 mm, SK 40, 40–6,000 rpm, measuring probe, Heidenhain TNC 425 control Hsdjfgz Rkopfx Acusfn

Sąlyga: geras (naudotas), Gamybos metai: 1989, Gamintojas: Deckel Pagaminimo metai: 1989 Mašinos numeris: 2387-1582 Serijos numeris: 25555 Tipas / Modelis: FP 2 NC Valdymas: Dialog 11 Judėjimo eigos x-y-z: 400 - 200 - 400 mm Hjdpfx Acjwy Dmhjusfn Stalas: 1.400 x 550 mm Stalo prailginimas: 1.200 x 370 mm Sūkių diapazonas: 40 iki 2.000 aps./min. Veleno tvirtinimas: SK 40 Pinolės eiga: 150 mm Galia: 2,2 kW Priedai/Įranga: Būklė: Gera Svoris: t Matmenys: 2.500 x 2.500 x 2.000 mm Valdymo spinta: 900 x 800 x 1.400 mm

Sąlyga: paruoštas naudoti (naudotas), Emco emcomat FB4 Frezavimo staklės CNC valdymas pagal X ir Y ašis Proto Trak tipo AGE 2 Taip pat galima naudoti kaip konvencinę staklę. SK40 tvirtinimas Veleno greitis: 50-2500 aps./min. Hsdpfx Ajxc H I Rocuefn X ašis: 450 mm Y ašis: 300 mm Z ašis: 350 mm Stalo ilgis: 800 mm Stalo plotis: 400 mm Įrengta aušinimo sistema, avarinis stabdis ir stalo apsauga su blokavimo sistema (interlock).

Sąlyga: naudotas, CNC milling machine DECKEL type FP 3 A Universal milling machine with handwheels, also suitable for conventional operation Serial No. 2206 – Year of manufacture: 1982 CNC path control: GRUNDIG CNC 2101 Travel distances: X: 490 mm, Y: 300 mm, Z: 340 mm Table size: 705 x 425 mm Spindle taper: SK 40 Quill stroke: 100 mm Spindle speed: 25 – 2500 rpm, 21 steps Feed speed: 5 – 500 mm/min, stepless Rapid traverse speed: 1200 mm/min Spindle drive motor power: 2 / 4 kW, pole-changing Electrical connection: 380 Volt, 50 Hz - CNC path control GRUNDIG CNC 2101 - Mechanical handwheels for all three axes - Universal tilting, swiveling, and rotating table - Vertical milling head swivels and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Safety enclosure at the front and sides with 3 folding doors - Control cabinet positioned beside the machine (L x W = 600 x 430 mm) Space requirement (L x W x H): 1900 x 1700 x 1950 mm Hfsdsv R E Rdjpfx Acusn Weight: 1700 kg (Machine 1540 kg + Electrical cabinet 160 kg) Very good condition

Sąlyga: geras (naudotas), Maho MH500W2 Valdymas: Heidenhain TNC232B Gamybos metai: apie 1988 Hfodew Id Igopfx Acusn Veleno laikiklis: ISO40 Veleno greitis: 20-4000 aps./min Padavimo greitis: 1-3000 mm/min Stalo matmenys: 700x350 mm Aušinimo sistema Dokumentacija Eigos: X: 500 mm Y: 380 mm Z: 350 mm Svoris: apie 1800 kg Staklės iki paskutinės akimirkos buvo pajungtos prie elektros tinklo ir yra geros, visiškai veikiantis būklės.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2019, The machine is on display and has only been used for demonstration purposes. Final sale of the last Optimill F 120X CNC milling machine directly from the manufacturer. F 120X – The OPTIMUM CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Heavy-duty design High productivity Linear guideways for high rapid traverse speeds in all axes 21-position tool changer magazine High reliability Cast base made of quality Meehanite cast iron Precision ground cross table with 3 T-slots Strongly ribbed, torsion-resistant machine base Precision-ground, preloaded, high-performance ball screws in all axes High-torque servo drives directly on the ball screws in all three axes Electronic handwheel Chip conveyor Cleaning pistol RJ45 connector, USB port, and power connection (230V) Coolant system with 210-liter coolant tank Heat exchanger Included options: PPU 290 touch panel 16,000 rpm inline spindle with oil cooler Belt conveyor with chip cart Machine leasing possible through Siemens Finance. Sufficient liquidity required. Dimensions and Weights Length approx. 2,315 mm Width/Depth approx. 2,194 mm Height approx. 2,325 mm Weight approx. 3,800 kg Drilling/Milling Capacity Maximum cutter head diameter: 80 mm Feed/Rapid Traverse Speed X-axis: 40,000 mm/min Y-axis: 40,000 mm/min Z-axis: 40,000 mm/min Electrical Data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Line frequency: 50 Hz Electrical connection Total connected load: 45 kVA Distance Vertical Spindle – Milling Table min.: 150 mm Distance Vertical Spindle – Milling Table max.: 450 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 125 mm Maximum load capacity: 250 kg Precision Repeatability: ± 0.006 mm Positioning accuracy: ± 0.005 mm Coolant System Hodpfxow Ea Rmj Acujfn Coolant pump(s) Drive power per coolant pump: 370 W Tank capacity: 120 l Control Type: Sinumerik 828D PPU 290 System software: SW 28x CNC memory: 8 MB Block change time: 2 ms Look Ahead: 150 Number of tools: 512 Travel X-axis (automatic): 500 mm Y-axis (automatic): 400 mm Z-axis (automatic): 300 mm Vertical Spindle Spindle taper: BT 30 Speed range: 10 – 16,000 rpm Drive motor power S1 continuous: 12 kW Drive motor power S6-30% duty: 22.8 kW Drive motor torque S1 continuous: 38 Nm Drive motor torque S6 30% duty: 116 Nm Feed Motor Torque X-axis S1 continuous: 6 Nm Y-axis S1 continuous: 6 Nm Z-axis S1 continuous: 11 Nm Servo Tool Changer Design: Carousel in front of spindle Number of tool stations: 21 tools

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year 2010, Excellent CONDITION with Tooling, CE-compliant! Technical Data: >> Year of manufacture: 2010 >> Fixed angle table >> Speed: infinitely variable up to 4000 rpm >> Feed rate, infinitely variable on 3 axes from 0 to 2000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Rapid traverse X/Y/Z: 5 / 5 / 4 m/min >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic drawbar system >> Weight approx. 1700 kg >> Required space approx.: 2.3 x 2 x 2 m >> Drive power: 12 KVA Accessories and Equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control operating manuals, and programming examples >> Handwheels >> Coolant system >> Toolholders, hydraulic vise, clamping tools Hjdpow Id Dzefx Acuofn About the Machine: Offered is a Kunzmann WF4/3 universal milling machine with Heidenhain TNC 124 control in outstanding original condition. The machine is from a facility where it was only lightly used for training purposes. The control is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal axes. Changing from vertical to horizontal operation is very simple thanks to the swivel-mounted vertical head. All guideways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically tested in our workshop. Take the opportunity to inspect and test the Kunzmann under power on site.

Sąlyga: geras (naudotas), Gamybos metai: 2003, Internal item no.: 25045 Hedpfsw Hrycsx Acujfn Universal Milling Machine Emco FB4 Year of manufacture: 2003 + Accessories (Hydraulic machine vice Allmatic 110 / 12x SK40 tool holders in rack) + Electrically tested until 11/2028 (according to test badge) + 3-axis digital readout Heidenhain ND780 Travels: X 450 / Y 300 / Z 350 mm Quill stroke: 100 mm Main drive: 3.2 kW Speed range: 63 – 3150 rpm Milling table: 800 x 400 mm Automatic central lubrication Dimensions (LxWxH): 200 x 200 x 200 cm Weight: 2,100 kg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2013, Emco emcomat FB-600 CNC frezavimo staklės Nieuwstraat gatvėje! Hedpfx Ajxc H H Hocuefn

Sąlyga: naudotas, Horizontal machining center with dual pallet changer STEINEL Type BFZ 5 featuring SIEMENS Sinumerik 810 M CNC control Serial No. 34 Year of manufacture: 1988 Travel distances: X: 500 mm, Y: 400 mm, Z: 320 mm Clamping/table area: 500 x 400 mm Tool holder: ISO 40 Spindle speed: up to 6300 rpm, infinitely variable Main spindle drive: 12 kW Power supply: 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Pallet changer with 2 stations - Data transfer interface - Coolant system with chip conveyor Required floor space (L x W x H): 4100 x 2500 x 2650 mm Weight: approx. 8 tons In good condition Hfodpfxoutuyij Acujn Transport dimensions: Machine (L x W x H): 3200 x 2500 x 2650 mm, approx. 7.5 tons Chip conveyor (L x W x H): 3500 x 1100 x 2100 mm, approx. 600 kg

Sąlyga: geras (naudotas), Gamybos metai: 1986, Milling machine Deckel FP3NC Hfodpow Ein Uefx Acuen Manufacturer: Deckel Model: FP3NC Year of manufacture: 1986 Control: Dialog 4 Condition: Used Travel (X/Y/Z): 400 / 400 / 400 mm Quill stroke: 80 mm Spindle speed: 40 rpm to 3600 rpm Swiveling milling head Hydraulic tool clamping, vertical/horizontal, SK40 Electronic handwheel Control panel for tool change and program start Documentation, lamp, coolant system, full enclosure NC T400 rotary table Weight: approx. 2000 kg Control cabinet weight: 300 kg

Sąlyga: naudotas, Gamybos metai: 1990, x-axis travel 400 mm y-axis travel 330 mm z-axis travel 350 mm Total power requirement 6.3 kW Machine weight approx. 2 t Space requirement approx. 736 m O F F E R We are pleased to offer you, subject to prior sale and errors excepted, from stock without obligation: H E R M L E CNC controlled Universal Tool Milling Machine with 4th Axis Model UWF 600 CNC (HDH TNC 355) Year of manufacture 1990 # 8637 Table travels: longitudinal X 400 mm vertical Z 350 mm cross Y 330 mm Table size 630 x 335 mm Spindle taper SK 40 Spindle speeds in 3 stages, vertical & horizontal 40 – 6,000 rpm Quill travel, vertical 63 mm Feeds, stepless 1 – 2,000 mm/min Feed force 4,800 N Rapid traverse 5,000 mm/min Spindle drive 3.5 kW Total drive 6.3 kW - 380 V - 50 Hz Weight 2,000 kg Accessories / Special Equipment Hfedpfx Ast Hxbwocusn • HEIDENHAIN 4-axis path control Type TNC 355 with graphics and various sub-programs, mobile electronic handwheel • Fixed angle table installed, equipped with CNC dividing head by HOFMANN, type with RÖHM 3-jaw chuck 160 mm diameter, center height approx. 125 mm, possibly also tiltable. Resolution 0.001 ° (dividing head can be removed if required!) • Vertical head can be easily swung away for use of horizontal spindle • Hydraulic tool clamping in V-spindle, 5 different milling arbors • Separate free-standing control cabinet, separate free-standing coolant system • Central lubrication, ammeter display, etc. Ideal machine for toolmaking and production of electrodes Condition: good – ready for demonstration, controller in HDH unit has been replaced Delivery: ex-stock as inspected Payment: strictly net - upon receipt of invoice Other conventional and CNC milling machines from DECKEL, MAHO, MIKRON or HERMLE and other well-known manufacturers in stock! Please enquire with us.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Emco Emcomat FB-450 Linear with Position Indicator – Like New Condition, CE-Compliant! Technical Specifications: >> Year of manufacture: 2013 Machine No.: F9A124962 Hsdpswycv Iefx Acujfn >> Clamping surface of the milling table: 800 x 400 mm T-slots: 8 Slot width: 14 mm H8 Slot spacing: 50 mm Maximum table load: 150 kg >> Infinitely variable spindle speeds: 10–5,000 rpm >> Infinitely variable feed rates: 10–5,000 mm/min Rapid traverse X-axis: 5,000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical and horizontal quill – SK40 taper >> Hydraulic clamping system >> Quill stroke: 80 mm >> Weight: approx. 2,000 kg >> Dimensions (approx.): 2.5 x 2 x 2 m >> Main spindle drive: 10 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Swing-out enclosure >> Coolant system >> Machine lamp >> Dividing head >> Rotary table >> Machine vice >> Steady rest About the machine: For sale is an Emco Emcomat FB-450 Linear universal milling machine equipped with a position indicator. This universal milling machine is in like-new condition. It comes from a government-operated facility where it was used only occasionally for training purposes. The control system is very user-friendly. In addition, the machine features hydraulic clamping for both vertical and horizontal applications. Switching from vertical to horizontal operation is very easy, thanks to the swing-away vertical head. The Emco has been mechanically and electrically tested by us. Take the opportunity to inspect and test the machine under power on site.

Sąlyga: naudotas, TECHNICAL DATA - Spindle speed: 50 - 7,100 [rpm] - 6 spindle feeds: 0.03 - 0.4 [mm/rev] - Spindle stroke: 210 [mm] - X-axis machining travel: 850 / 1,000 [mm] - Y-axis machining travel: 465 [mm] - Z-axis machining travel: 750 [mm] - Clamping surface on table: 1,570 x 500 [mm] - Number of T-slots: 7 - Distance between T-slots: 50 [mm] - T-slot width: 12H8 Hsdpfx Acjvxw Azjuefn - Positioning accuracy: 0.01 [mm] - Repeat accuracy: 0.005 [mm] - Max. workpiece weight: 250 [kg] - Drive power: 5 [kW] - Drilling capacity in steel: 30 [mm] - Internal threading capacity in steel: M20 - Internal threading capacity in cast iron: M24 ACCESSORIES - HEIDENHAIN TNC 151 numerical control

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, veikimo valandos: 2 542 h, Funkcionalumas: visiškai funkcionalus, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned and powered, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1.0 – 4,500 rpm Feed rates: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirement: approx. 2,000 x 2,000 x 2,100 mm Total power requirement: approx. 7 kVA Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety enclosure Hfsdpfx Aew D D Sfjcuon – LED machine lamp