Universalios įrankių frezavimo staklės NC/CNC, x eiga 0–399 mm pirkti naudotą (10)

Sąlyga: geras (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Techninės detalės X eiga: 300 mm Y eiga: 160 mm Z eiga: 290 mm Stalo matmenys: 210 x 600 mm Stalo apkrova: maks. 200 kg Įrankio tvirtinimas: SK 40 Veleno sūkių dažnis (16): 40 - 2000 aps./min Pastovūs padavimai: 5 - 500 mm/min Gedexl Tcgopfx Acuokc Greitas padavimas: 1,2 m/min Veleno pavara: 1,5 / 1,9 kW Bendras galios poreikis: 9,5 kVA Staklių svoris apie: 730 kg Užimamas plotas apie: 2000 x 2200 x 1655 mm Papildoma informacija Staklės labai geros būklės, atvežtos iš tyrimų centro. Įranga: 3 ašių aktyvus skaitmeninis indikatorių Heidenhain TNC 113 Fiksuotas kampinis stalas Aušinimo įrenginys Kelch montavimo blokas Staklių spaustuvai Prilaikymo įtaisas horizontaliam velenui

Sąlyga: naudotas, Gamybos metai: 1982, X eiga 390 mm Y eiga 330 mm Z eiga 380 mm Valdymas: konvencinis Stalo darbinis paviršius: 850 x 255 mm Maks. stalo apkrova: 200 kg Gksdpfew Spbgex Acusc T formos griovelių skaičius: 5 T griovelio plotis: 12 mm H8 T griovelių atstumas: 45 mm Sukimosi greičio diapazonas - frezavimas: 63 - 2 800 aps./min Pavarų skaičius: 12 padėčių Pastūma: 0 - 1 500 mm/min Įrankio laikiklis: SK 40 Greita eiga: 1 500 mm/min Staklių svoris: apie 1,9 t Reikalinga erdvė: apie 2,0 x 2,5 x 2,8 m Universalioji įrankių frezavimo staklė HECKLER & KOCH - AM 442

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1987, Universal Tool Milling Machine DECKEL FP 1 With 3-axis digital readout Heidenhain TNC 113 Year of manufacture: 1987 Travel: X 300 / Y 160 / Z 340 mm Spindle speed range: 40 – 2000 rpm Supplied with the following accessories: Universal table, 600 mm x 250 mm clamping surface Swiveling vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 pcs. machine vice 1 pcs. tailstock with counter bearing 1 pcs. long milling arbor Ø 22 mm Various tool holders S 22 x 2 Gsdpfx Aepxm Anscuokc Bellows for Z-axis Machine light Automatic central lubrication pump Chip tray Coolant device Operating manual THE MACHINE IS IN VERY GOOD CONDITION!!

Sąlyga: geras (naudotas), Gamybos metai: 1998, Universal Tool Milling Machine Manufacturer: MACMON Model: M 100 ADR Technical Data: - Heidenhain TNC124 control - Machine number: 7989 - Year of manufacture: 1998 - Travel: X 310 mm, Y 170 mm, Z 330 mm - Speed range: 40-2500 rpm (infinitely variable in 2 ranges) - Feed: 10-800 mm/min (infinitely variable) - Rapid traverse: 800 mm/min - Equipment: Vertical & horizontal spindle (including lifting device for vertical spindle) - Table size: 600 x 215 mm - SK40 taper - Drive motor: 2.2 kW - Connected load: 5.5 kW - Weight: approx. 750 kg - Required space: 1000 x 1160 x 1400 mm Including complete documentation Gedpsrwml Asfx Acuokc The machine can be tested or demonstrated under power on site by arrangement. All information is provided without guarantee. Subject to prior sale. The item is sold excluding any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, or for injury to life, limb, or health.

Sąlyga: naudotas, CNC Tool Milling Machine MAHO Type MH 400 E Machine No. 43072 Year of manufacture: 1989 Travel distances X: 400 mm Y: 250 mm Z: 375 mm Table size 700 x 270 mm Distance spindle nose / table max. 410 mm Tool holder ISO 40 with pull stud Type B Spindle speed 80 - 4000 rpm, 18 steps Feed speed 1-1500 mm/min, stepless Rapid traverse (X, Z, and Y) 2.5 m/min Quill stroke vertically 50 mm Spindle drive 2.2 kW Power supply 400 Volt, 50 Hz, 19 kVA - Swivelling control panel with PHILIPS 432 CNC path control - LCD monitor VISCOTECH - Hydro-mechanical tool clamping - Swiveling device for vertical milling head - Splash guard cabin as table enclosure with 3 upward opening doors - Electrical cabinet fixed to the machine - V24 interface (RS 232) for data transfer - 52,470 operating hours, main switch on - Rigid angle table - Coolant system with coolant pump located beneath the machine Gjdpfx Acjh Ic Ufsujkc - Centralized lubrication system Vogel - Operator's manual, electrical schematic diagram Required space (L x W x H): 2250 x 1800 x 1850 mm Weight approx. 1.5 t Good condition

Sąlyga: geras (naudotas), X-axis travel: 300 mm Y-axis travel: 300 mm Z-axis travel: 400 mm CNC control: DIALOG 11 Spindle speeds: 31 – 5,000 rpm Spindle taper: ISO 40 Table size: 620 x 390 mm Table load capacity: 250 kg Infinitely variable feeds: 2 – 6,000 mm/min Drive power: 5.5 kW Quill stroke: 80 mm Coolant system Operating voltage: 380 V Total power requirement: 11.0 kVA Machine weight: approx. 1.65 t Space requirements: approx. 1.85 x 1.90 x 1.80 m Gksdjin Ndajpfx Acuoc Electrical cabinet: 1.35 x 0.70 x 1.70 m Coolant tank: 1.00 x 0.45 x 0.20 m

Sąlyga: geras (naudotas), Gamybos metai: 1983, Control: Positioning and path control incl. screen HEIDENHAIN TNC 135 3-axis manual input control Gjdoht Hbujpfx Acujkc TECHNICAL SPECIFICATIONS Working area X-axis (longitudinal) manual/automatic: 410/390 mm Y-axis (cross) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill stroke, vertical: 63 mm Angle table clamping surface: 700 x 285 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Step progression (geometric stepping): 1.4 Tool holder (DIN 2079): ISO 40 EQUIPMENT/ACCESSORIES  Operation by hand and via CNC program  Vertical and horizontal machining  Vertical milling head swiveling  Vertical milling head angle adjustable  Quill feed vertical, manual  Angle table  Coolant system  Coolant and chip tray  Chip splash guard in the working area  Leveling elements  Documentation

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 2801-0234, x-travel: 300 mm y-travel: 220 mm Gedjcxxm Espfx Acuokc z-travel: 400 mm Clamping surface: 620 x 390 mm Spindle speed: 31 - 3150 rpm Feed range: 1 - 3600 mm/min Rapid traverse: 4000 mm/min Spindle taper: SK 40 Head swiveling +/-: 90° Quill stroke: 60 mm Total power requirement: 1.09 / 2.0 / 4.0 kW Machine weight approx.: 1.3 t Space requirement approx.: 1.3 x 1.1 x 1.6 m CNC-controlled universal milling machine equipped with Dialog 4 control, vertically swivel head +/- 90° with 60 mm quill stroke, horizontal spindle, power feeds and rapid traverse on 3 axes, hydraulic tool clamping, automatic central lubrication, coolant system, emergency stop, chip splash guard enclosure with chip tray, separate control cabinet. The machine is in good condition.

Sąlyga: naudotas,

Sąlyga: naudotas, Gamybos metai: 1995, Technical details: Gksdpew D Hhpsfx Acujc X-travel: 600 mm Y-travel: 500 mm Z-travel: 450 mm Machine weight approx.: 3.5 t