Įrankių frezavimo staklės - universalios

MIKRON UMS600

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 5.47.07.02, padavimo ilgis X ašis: 600 mm, padavimo eiga Y ašimi: 500 mm, padavimo ilgis Z ašis: 450 mm, sukimosi greitis (maks.): 6 300 aps./min, įrankių magazino lizdų skaičius: 44, TECHNICAL DETAILS Drive Power at 44% Duty Cycle: 9 kW Drive Power at 100% Duty Cycle: 6 kW Max. Torque: 52 Nm Processing Spindles (Vertical and Horizontal) Max. Spindle Torque at 44% Duty Cycle: 800 Nm Number of Gear Stages: 4 Adjustable Speed Range (vertical and horizontal): 10 – 6,300 rpm Tool Holder / Pull Stud: SK 40 / DIN 69871 Max. Tool Weight: 13 kg Tool Diameter: 130 mm Pull-in Force: 10,000 N Ejection Force: 3,500 N Travel Paths in Automatic Operation Longitudinal Movement Spindle Feed (X-axis): 600 mm Transverse Movement Spindle Slide (Y-axis): 500 mm Vertical Movement Spindle Slide (Z-axis): 450 mm Feed Drive (AC) Programmable Feed Rate X / Y-axis: 0 – 15,000 mm/min Programmable Feed Rate Z-axis: 0 – 12,000 mm/min Rapid Traverse Speed X-/Y-axis: 15,000 mm/min Rapid Traverse Speed Z-axis: 12,000 mm/min Coolant Coolant Tank Capacity: 150 l Flow Rate: approx. 20 l/min Noise Emission Sound Power Level: 75 dB(A) Clamping Table Table Size: 530 × 900 mm Number of T-slots: 4 T-slot Width: 14 H7 Table Load Capacity: 400 kg Tool Changer TCD 44 Tool Positions: 2 × 22 Tool Diameter: 80 / 130 mm Tool Length (max.): 350 mm Tool Weight (max.): 6 kg Max. Workpiece Weight in Drum Magazine: 200 kg Chip-to-Chip Time: 20-25 s Tool Change Time: 12 - 16 s MACHINE DETAILS Total Weight with Protective Enclosure: 3,000 kg Total Weight with Cabin Roof: 3,100 kg Environmental Conditions Max. Permissible Ambient Temperature: 35 °C Max. Permissible Relative Humidity: 75 % Electrical Connection Data Total Installed Nominal Power: 15.8 kW Utilized and Connected Power: 12.3 kW Hsdswm I N Hspfx Af Deff Operating Voltage and Frequency: 3 × 400 V / 50 Hz

Gamybos metai: 2007, būklė: paruoštas naudoti (naudotas), X ašies eiga: 3 500 mm, Y ašies eiga: 1 200 mm, Z ašies eigos atstumas: 1 500 mm, ašių skaičius: 5, Šis 5 ašių TOS Varnsdorf WHN130 buvo pagamintas 2007 m. Tai horizontalios ištekinimo ir frezavimo staklės, kurių stalo dydis 1800 × 1800 mm, o suklio skersmuo - 130 mm. Staklės turi sukamąjį stalą ir yra valdomos NCT-104 sistema. Apsvarstykite galimybę įsigyti šias TOS Varnsdorf WHN130 gręžimo stakles. Susisiekite su mumis dėl išsamesnės informacijos. • Valdymo sistema: NCT-104 Hsdpjx Imtajfx Af Deff • Stalas: sukamasis, 1800 × 1800 mm • W (verpstės pynė): (570 mm) • Suklio skersmuo: 130 mm

Būklė: geras (naudotas), Please read the technical specifications thoroughly. If the machine is a potential investment for you, we request your complete identification, including a correct telephone number and email address, in order to provide a quotation. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel paths: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Extension of working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear steps: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill stroke: 60 mm Feed X/Z axis: 5 – 500 mm/min Feed control: stepless Rapid traverse, X/Z axis: 1200 mm/min Feed Y axis: manual Hfsdexyc Tkopfx Af Def Fixed angle table: 600 x 210 mm Swivel vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data subject to confirmation! Features: For horizontal machining, the milling head is swiveled by 90 degrees and pushed to the rear. 3-axis precision digital readout HEIDENHAIN Stepless feed in X/Z axis The machine was partially overhauled by a specialist company several years ago. Equipment: 3-axis digital readout HEIDENHAIN Micro coolant spray unit Fixed angle table Chip tray Machine lamp Machine feet Further accessories on request! Condition: Good to very good, from training workshop Available from March 2026

Būklė: labai geros būklės (naudotas), padavimo ilgis X ašis: 450 mm, padavimo eiga Y ašimi: 300 mm, padavimo ilgis Z ašis: 300 mm,

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 450 mm, veleno greitis (min.): 25 aps./min, veleno greitis (maks.): 6 000 aps./min, X ašies eiga: 213 mm, Z ašies eigos atstumas: 450 mm, greitas poslinkis X ašimi: 24 m/min, greitasis eiga Z ašyje: 30 m/min, strypo praėjimas: 65 mm, CNC Siemens 840 D Working Area Max swing diameter over bed: 505 mm Swing diameter over X-slide: 375 mm Chuck diameter: 210 mm Bar capacity: 65 mm Cross travel (X): 213 mm Longitudinal travel (Z): 450 mm Feed Rates Rapid traverse X/Z axes: 24/30 m/min Main Spindle Spindle nose (flat flange): 140 h5 mm Front bearing diameter: 100 mm Main Spindle Spindle motor power (40/100% DC): 16/12 kW Torque (40/100% DC): 153/115 Nm Spindle speed: 25 - 6000 rpm Tool Turret Number of tool positions: 12 Number of driven positions: 12 Shank diameter (DIN 69880): 30 mm Driven tool motor power (40% DC): 9 kW Max. torque (40% DC): 20 Nm Max. speed: 4500 rpm Tailstock Automatic tailstock travel: 450 mm Quill taper: MT 4 Max. tailstock thrust: 400 daN Hjdpfow Adhwox Af Deff Machine Equipment: • Chip conveyor • Fume extraction prep • 2 axial driven tool modules • 4 radial driven tool modules • Fixed tool holders

Būklė: naudotas, Gamybos metai: 1995, Universali CNC frezavimo staklė Gamintojas: HERMLE Tipas: UWF 902 H Metai: 1995 Hodpfov Rpr Ssx Af Doff Darbo valandos: 46.680 Valdymas: HEIDENHAIN TNC 426 Stalo eiga X/Y/Z: 600 x 450 x 500 mm Kampinis stalas: 900 x 458 mm Renishaw 3D jutiklis Sūkių diapazonas: 20–6.300 aps./min. Įrankio laikiklis: SK 40 Aušinimo skysčio bakas Variklio galia: 8,6 kW Svoris apie: 4.500 kg Staklių matmenys I x P x A apie: 2.950 x 2.200 x 2.300 mm

Būklė: naudotas, Gamybos metai: 1999, X-axis travel: 600 mm Y-axis travel: 525 mm Z-axis travel: 500 mm Table clamping surface: 1000 x 543 mm Hodpfx Aotqqmhjf Djff Spindle taper: SK 40 Spindle interface: DIN 69871 Spindle speed – stepless: 20 – 12,000 rpm Feed rates X/Y/Z axis: 20 – 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Maximum table load: 350 kg Control system: HEIDENHAIN MillPlus Head swiveling: +/- 90° Total power requirement: 26 kVA Machine weight: approx. 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system

Būklė: geras (naudotas), Spindle diameter: 80 mm Spindle mount: SK50 Spindle speeds: 11 - 1000 rpm X-axis travel: 1700 mm Y-axis travel: 1800 mm Z-axis travel: 1800 mm Spindle extension (W-axis): 710 mm Table dimensions: 1100 x 900 mm Elbo digital readout: On Y-axis and Z-axis Equipped with: - Rotary table - Several tool holders Spindle motor: 7.5 kW Machine dimensions (LxWxH): 5100 x 2650 x 3300 mm Hfodpfx Afephl Ece Dsf Machine weight: 10 t

Būklė: naudotas, Gamybos metai: 1985, x-axis travel: 500 mm y-axis travel: 500 mm z-axis travel: 350 mm table surface: 800 x 450 mm spindle taper: ISO 40 quill stroke: mm Hsdpfxotv Ia Tj Af Dsff feeds - longitudinal & cross: mm/min feeds - vertical: mm/min speed range max.: 3150 rpm power supply: 380 V / 50 Hz drive power: 4 kW machine weight approx.: 1.7 t space requirement approx.: 2.5 x 2.3 x 2.0 m control: HEIDENHAIN TNC 155, with electronic handwheel, various tool holders, new bevel gear set,

Būklė: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 1 050 mm, padavimo eiga Y ašimi: 360 mm, padavimo ilgis Z ašis: 500 mm, X ašies eiga: 1 050 mm, Y ašies eiga: 360 mm, Z ašies eigos atstumas: 500 mm, bendras svoris: 3 000 kg, Įranga: dokumentacija / vadovas, Tiger FO 135 universal milling machine Hsdpfx Aerqwbiof Djff Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully operational. Axis movements are smooth, and the guideways are in good condition, featuring an automatic lubrication system. The table is well maintained and shows minimal signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, enabling work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travels: ➢ X-axis (longitudinal): 1,050 mm ➢ Y-axis (cross): 360 mm ➢ Z-axis (vertical): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed ranges: ➢ Vertical axis: 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 ÷ 1,550 rpm, 12 speeds • Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm • Variable feed rates ➢ Stepless (infinitely variable) feed: 0 ÷ 1,500 mm/min • Rapid traverse: ➢ X & Y axes: 3,000 mm/min ➢ Z axis: 1,500 mm/min • Universal milling head with 80 mm manual quill stroke • Automatic lubrication with electric pump • Low-voltage electric controls via side arm push-button panel • Star-delta starter • Siemens magnetic thermal overload protection • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories • Counter supports for milling arbor • Milling arbor ø32 mm