Briketavimo presai pirkti naudotą (41)

Sąlyga: naujas, Gamybos metai: 2025, Various models available! 1. Briquette diameter: Ø 200 mm 2. Capacity: 12,000 kg/hour (steel) 3. Preliminary compression force: 50 tons 4. Main compression cylinder pressure: 800 tons 5. Maximum operating pressure: 300 bar 6. Cycle time: 10 - 12 seconds 7. Electric motor power: 6x37=222 kW (main motors) Ledpfjgv I N Uox Af Ijhb 8. Machine dimensions: 11,000 mm x 10,000 mm 9. Machine weight: 60,000 kg 10. Screw feeders automatically fill the compression chamber, and the integrated vibration hopper ensures chamber protection by preventing oversized material from entering. 11. Cylinder rods are induction-hardened and chrome-plated. 12. Hydraulic oil cooling system is implemented. 13. All hydraulic system pumps and valves are by PARKER or BOSCH-REXROTH. 14. The machine is fully automated with PLC control. 15. All electrical and electronic components are by SCHNEIDER or SIEMENS. 16. The machine is CE-certified. This marking certifies that a product complies with European directives concerning consumer safety, health, or environmental protection. 17. The machine is covered under AYMAS Makina San. Ve Tic. Ltd. Şti. warranty against manufacturing defects for one (1) year or three thousand (3000) operating hours.

Sąlyga: naujas, Gamybos metai: 2025, Multiple models available! 1. Briquette diameter: Ø 160 mm 2. Capacity: 4,500 – 5,500 kg/hour (iron and steel) 3. Preliminary compaction force: 50 tons 4. Main compression cylinder pressure: 600 tons 5. Maximum operating pressure: 300 bar 6. Cycle time: 12 – 14 seconds 7. Total electric motor power: 170 kW 8. Machine dimensions (width x length x height): 5,200 mm x 8,000 mm x 3,100 mm Lhedpfx Aegv I Ihof Isb 9. Machine weight: 42,000 kg 10. Screw conveyor feed automatically fills the compression chamber, and the integrated vibrating hopper ensures chamber safety by directing oversized material away from the chamber. 11. Cylinder rods are induction-hardened and chrome-plated. 12. Hydraulic oil cooling system is included. 13. Hydraulic system pumps and valves are by premium brands PARKER or BOSCH-REXROTH. 14. Machine is fully automatic via PLC control system. 15. All electrical and electronic components are by SCHNEIDER or SIEMENS. 16. The machine is CE-certified. The marking certifies that the product complies with European directives regarding consumer safety, health, and environmental protection. 17. The machine is covered by a warranty from AYMAS Makina San. Ve Tic. Ltd. Şti. against manufacturing defects for one (1) year or three thousand (3,000) operating hours.

Sąlyga: naujas, Gamybos metai: 2025, Various models available! 1. Briquette diameter: Ø 80 mm 2. Capacity: 700-900 kg/hour (copper) 3. Preliminary ram force: 12.5 tons 4. Main compression cylinder force: 250 tons (5 tons/cm²) 5. Maximum working pressure: 300 bar 6. Cycle time: 12 - 14 seconds 7. Electric motor power: 30 kW 8. Machine dimensions (width x length x height): 2200 mm x 2600 mm x 2800 mm 9. Machine weight: 6,000 kg 10. Screw drive feeders automatically fill the compression chamber, while the integrated vibrating hopper ensures chamber safety by preventing oversized material from entering. 11. Cylinder rods are induction-hardened and chrome-plated. 12. Hydraulic oil cooling system implemented. 13. Pumps and valves for the hydraulic system are from globally renowned brands such as PARKER. 14. The machine is fully automatic and PLC-controlled. 15. All electric and electronic components are from SCHNEIDER or SIEMENS brand. Ljdogwa Urspfx Af Ishb 16. The machine is CE-certified. This marking confirms the product complies with European consumer safety, health, and environmental requirements. 17. The machine is covered under AYMAS Makina San. Ve Tic. Ltd. Şti. warranty against manufacturing defects for one (1) year or three thousand (3,000) operating hours.

Sąlyga: naudotas, Gamybos metai: 2012, bendras plotis: 1 380 mm, bendras aukštis: 1 710 mm, bendras ilgis: 2 100 mm, Tai komplektas, sudarytas iš briketų presavimo įrenginio su ištraukimu. Ištraukimo galingumas: 5.800 m³/h Lhjdpexr Dz Tjfx Af Ijb - Pagaminimo metai: 2012 - Dokumentacija prieinama: Ne - CE sertifikatas: Nėra - Transportavimo matmenys: 2100mm x 1380mm x 1710mm (ilgis x plotis x aukštis) - Transporto pakuočių skaičius [vnt.]: 1 Finansinė informacija PVM: nurodyta kaina be PVM PVM/ar taikomas maržos apmokestinimas: PVM atskaitomas juridiniams asmenims Pristatymas ir įrangos keitimas galimi bet kada visiems pramoniniams įrenginiams. Glenn Smeets

Sąlyga: naudotas, Gamybos metai: 2010, bendras plotis: 2 080 mm, bendras aukštis: 1 900 mm, bendras ilgis: 2 440 mm, Briketavimo presas; Höcker Polytechnik BrikStar C 3-19-L 4,3 kW, 400 V 25 kg/val. Piltuvo talpa: 3 m³ Lhedsxqdxcopfx Af Isb Alyvos bakas: 50 l Matmenys: 2015x2360x1300 mm, 830 kg - Pagaminimo metai: 2010 - Dokumentacija prieinama: Taip - CE sertifikatas: Nėra - Transportavimo matmenys: 2440 x 2080 x 1900 mm (ilgis x plotis x aukštis) - Transportavimo pakuočių kiekis [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / skirtumo apmokestinimas: PVM atskaitomas verslininkams Pristatymas ir mainai galimi bet kada visoms pramonės sritims Yorick Diebels

Sąlyga: naudotas, Gamybos metai: 2019, bendras plotis: 890 mm, bendras aukštis: 1 100 mm, bendras ilgis: 1 860 mm, Tuščiasvoris: 390 kg - Pagaminimo metai: 2019 - Dokumentacija prieinama: Ne - CE sertifikatas prieinamas: Ne - Serijos numeris: 355 - Transportavimo matmenys: 1860 mm x 890 mm x 1100 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 390 kg - Transporto paketų skaičius [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM Lsdpexixbvsfx Af Ishb PVM / Skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir įsigijimas galimi bet kuriuo metu viskam iš pramonės srities Yorick Diebels

Sąlyga: naudotas, Gamybos metai: 1998, Briketų presas Weima TH 400 Pagaminimo metai: 1998 Briketo skersmuo: 50 mm Našumas: 60–80 kg/val. Mašinos numeris: 950-756 Pagrindinis variklis: 7,5 kW 200 bar, 400 V Komplekte didelis surinkimo konteineris Įranga šiuo metu neveikia, hidraulinis blokas nesandarus. - Pagaminimo metai: 1998 - Dokumentacija: Nėra Lhjdpfowh I Urox Af Isb - CE sertifikatas: Nėra Finansinė informacija PVM: Nurodyta kaina be PVM PVM/diferencijuotas apmokestinimas: PVM atskaitomas verslui Pristatymas ir atpirkimas įmanomi bet kada viskam iš pramonės sektoriaus Yorick Diebels

Sąlyga: naudotas, Gamybos metai: 2017, veikimo valandos: 854 h, bendras plotis: 2 450 mm, bendras aukštis: 1 100 mm, bendras ilgis: 1 900 mm, Savaeigis svoris: 800 kg Kaina: pagal užklausą - Pagaminimo metai: 2017 - Dokumentacija prieinama: Ne - CE ženklinimas: Taip - CE sertifikatas: Ne - Serijos numeris: 5037411-000150 - Darbo valandos: 854 - Transportavimo matmenys: 1900 mm x 2450 mm x 1100 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 800 kg Lodpfoxan Utox Af Ishb - Transporto pakuotės [vnt.]: 2 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/PVM atskaita: PVM gali būti atskaitomas verslo subjektams Pristatymas ir įsigyjimų priėmimas visiems pramonės įrenginiams galimas bet kada Yorick Diebels

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, Amis ZBP 50 S Duo sawdust briquetting machine Year of manufacture: 2019 Load capacity depending on material: up to 140 kg 3,800 operating hours Briquette diameter: 50 mm Tank capacity: 1.2 m³ Roll with feeder Pre-compaction Screw conveyor Ledpfxoumwm So Af Ishb Hydraulic pump motors: 7.5 kW each Fan cooling Sawdust level sensor in the tank Hydraulic oil tank: 100 l SIEMENS control system Dimensions (L x W x H): 3000 x 2400 x 1700 mm Weight: 2000 kg The price for a new machine is €39,800

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Atsarginės dalys ATM Recyclingsystems GmbH, Lindemann Germany GmbH, Danieli Henschel GmbH, RUF, Ayamas briketavimo presams. Vietovė – Austrija. Prieinama iš karto. Lsdpexy Nkpjfx Af Ishb

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, veikimo valandos: 56 927 h, Funkcionalumas: visiškai funkcionalus, Gamintojas: ATM Recyclingsystems GmbH Tipas: ArnoBrik 15 Pagaminimo metai: 2001 Briketų diametras: 150 mm Techniniai duomenys Briketų diametras: 140 arba 150 mm Našumas: - Ketaus drožlės: 4,8–5,3 t/h - Plieno drožlės: 4–5 t/h - Mišri briketų gamyba: 4–5 t/h - Aliuminio drožlės: 1,6–1,8 t/h Mišri briketų gamyba: 4–4,5 t/h Padangų viela: 2,5–3 t/h Lhodpjxy E H Hefx Af Ijb Valandinis našumas priklauso nuo medžiagos Briketo tankis (plienas ir ketus): 5,5 kg/dm³ Darbinis slėgis: 300 bar Užimamas plotas (I x P x A): 13 500 x 6 500 x 2 000 mm Mašinos svoris: 30 t Pagrindinio cilindro jėga: 5 300 kN Alyvos poreikis: 2 800 litrų Pagrindinis variklis: 4 x 30 kW Bendra prijungimo galia (su priedais): apie 150 kW Briketo aukštis: 110–140 mm Briketo svoris (priklauso nuo medžiagos): apie 10–16 kg Ciklo trukmė: apie 10 sek.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2014, veikimo valandos: 7 822 h, Funkcionalumas: visiškai funkcionalus, Gamintojas: ATM Tipas: ArnoBrik 10 Metai: 2014 Briketų skersmuo: 105 mm Techniniai duomenys Pagrindiniai matmenys Ilgis x plotis x aukštis: 4.250 x 3.600 x 2.200 mm Svoris apytiksliai: 10 t Briketų skersmuo: 105 mm Briketų aukštis, priklausomai nuo medžiagos: apie 60–120 mm Funkciniai duomenys Ciklo trukmė: 10 sek. Valandinė našumo talpa: - Aliuminis: 850–1060 kg/val. - Plienas, lietinis: 1.800–2.000 kg/val. - Nikelis: 1.800–2.000 kg/val. Aliuminio briketo svoris: 2,0–2,5 kg Briketo tankis (plienas, lietinis): 5,5 kg/dm³ Briketo tankis (aliuminis): 2,2–2,5 kg/dm³ Lhodpfx Afexy E Evj Ieb Hidraulinė įranga Reguliuojamų ašinių stūmoklinių siurblių skaičius: 2 vnt. Reikiama galia vienam siurblių komplektui: 30 kW Darbinis slėgis: 300 bar Hidraulinės talpos tūris: 1.300 l Elektrinė įranga Variklio galia: 70 kW Valdymo įtampa: 24 V DC Maitinimo įtampa: 3 x 400 V / 50 Hz

Sąlyga: naujas, Gamybos metai: 2025, * Production time approx. 4–5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates Lhedpfx Aechqxxof Ijb + 25 years of experience, continuous development, and expertise + Several hundred machines in use by satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series are designed for compacting materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality in continuous operation. The pressing process is performed purely by hydraulic pressure, without the addition of binding agents. Depending on the material, the volume of the feedstock can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger volumes or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on customer requirements, MPP NEM standalone machines can be configured as complete systems. The chip container for the press can be loaded manually, via conveyor belt, using a dust extractor, or with a tilting skip. For systems intended for fully automatic operation, the use of a lift-and-tilt device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for producing briquettes from homogeneous material. The length of a briquette varies depending on the model from 40 to 75 mm, and the diameter is either 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a drip tray to collect and recover coolant, cutting, and lubricating fluids. Non-ferrous metal chips up to approx. 20 mm in length can be loaded into the briquetting press’s storage hopper. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slider until the set pressing pressure is reached. Then the vertical cylinder rises, and the stable briquette is ejected. Briquetting offers the following advantages: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity approx. up to 200 kg per hour *highly material-dependent - Last test with aluminum granulate

Sąlyga: geras (naudotas), Good, used condition Ledpfx Afjt Hxude Iohb Main motor: 11 kW Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / technically inspected in 01/2025 Briquette size: 150x60 mm *Used machine, sold as seen Functional guarantee upon handover

Sąlyga: naujas, Gamybos metai: 2026, * Options available at extra cost, see below * Production time approx. +/- 5 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction, ensuring consistent briquette quality during continuous operation. The pressing process takes place without any binding agents, relying solely on hydraulic pressure. Depending on the material, the input volume can be reduced by up to 90%. The standard silo has a volume of approx. 0.5 m³. Larger silos or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. MPP NEM single machines can be combined into complete systems according to customer requirements. The press’s chip container can be loaded manually, via conveyor belt, with a dust extractor, or by tilting container. For fully automatic systems, the use of a lifting/tipping device in combination with a shredder is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette varies by model, between 40 and 80 mm; the diameter depends on type: 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be fitted with a collecting tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length can be filled into the press’s storage container. A stirrer is installed at the bottom of the container to prevent bridging and feed the material into the precompaction chamber. In this chamber, a hydraulic slide precompacts the material and pushes it into the pressing block. The main ram compresses the material against a vertical slide until the set pressure is reached. Then the vertical cylinder lifts, and the briquette is ejected. Lhjdpsgfm Rysfx Af Iob The more homogeneous the input material, the more uniform the length of the briquettes produced. Advantages of briquette production: • Reduction of volume by up to 90% • Emulsion recovery • Cost savings in storage and transport • Convenient disposal • Profitable sales Briquetting Press NEM 900: For briquetting aluminium chips Throughput: up to max. 320 kg/h (material-dependent; chip length < 14 mm) *Further details after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including stirrer Oil tank: 600 litres Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2,250 kg Hydraulic precompaction via slide Main pressing cylinder Vertical cylinder Prepared for connection to a cooling unit

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Machine available at special price Another machine, available immediately (ex works Neckartailfingen) Demonstration machine with approx. 10 operating hours Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation Lodpfjfci D Aex Af Iehb + Long-standing, reliable, and established machine Including control cabinet with timer operation The press is switched on manually and runs for the set time on the timer (e.g., 4 hours), then automatically shuts off. Technical data: Briquette dimensions: approx. 35 x 35 mm (square) Briquette length: 5–40 mm *depending on material Throughput capacity up to 25 kg/h *depending on material Machine dimensions (approx.): 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals increase wear --- Optional at extra charge: - Timer function + €490 net The machine is started manually and switches off automatically after the preset time. - Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, C7m2mgj Surcharge + €690 net (delivery time approx. 8 weeks) ---

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Briiketų presas aliuminio arba plieninėms drožlėms Itin didelis presavimo slėgis – 3 700 kg/cm² Didelis sandėliavimo bunkeris Briiketo dydis: 60 x 40 mm Našumas: Aliuminio drožlės – iki maždaug 70 kg/h Plieninės drožlės – iki maždaug 100 kg/h Žalvarinės drožlės – iki maždaug 100 kg/h *priklausomai nuo žaliavos Lsdpsw Ig Sujfx Af Iehb Įeina: - Emulsijos padėklas - Emulsijos siurblys - Alyvos aušintuvas

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2023, All wear parts new only 704 operating hours Special price for a slightly used demo machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, which ensures consistent briquette quality even in continuous operation. The pressing process takes place without the addition of binding agents, relying solely on hydraulic pressing force. The volume of the input material can be reduced by up to 90%, depending on the material. Throughput rate: up to max. 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 litres Max. briquette length: 50 mm Opt. briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 litres Lodjd N Dnhspfx Af Ijhb Dimensions: 1750x1130x1100 mm (LxWxH) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Level sensor: yes Requirements for input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room, minimum +5°C - Max. load on agitator: 150 kg - The material feed must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Sąlyga: geras (naudotas), Techniniai duomenys: Briketavimo presas geros būklės Pagaminimo metai: 2007 Techninė apžiūra 2025-06 Cilindrinis briketas 80 mm Našumas iki maksimaliai 150 kg/val. *tik apie 3 949 darbo valandos - Hidraulinis presas: briketavimo presas su išstūmimo taku - Hidraulinė stotis: 4 kW - Slėgis: maks. 300 barų - Transportavimo matmenys: 1585/2140/H1940 mm - Svoris: 1370 kg Funkcinė garantija atiduodant Maloniai kviečiame nemokamam išbandymui! Lhodowtdk Tspfx Af Isb

Sąlyga: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Pilna briketavimo linija 2 x RUF 330. Katilinė, būgninė džiovykla, konvejeriai. Lhodpfx Aoxazhtef Ijb

Sąlyga: geras (naudotas), Technical Specifications: Briquetting Press RUF RB 440 Pressing capacity for wood: up to a maximum of 440 kg/h Material moisture: maximum 15% Motor power: approx. 30 kW Briquette size; rectangular: 150 x 60 mm Length: 40 – 110 mm Dimensions approx. 1680 x 1800 x 2000 mm Lsdpfxjt H D Eze Af Ijhb Weight: 3000 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 2000 x 1600 x 1500 mm Weight: 1550 kg Total power requirement: 11.5 kW Briquette Press BP-200 PRO - Briquette diameter: 80 mm - Hydraulic motor: 11.0 kW Lsdpevz Efvofx Af Ishb - Hourly throughput: 90–250 kg/h - 7 cycles per minute at full capacity - Sensor for material detection (automatic) - Maximum briquette length per impulse: 70 mm - Dual pressure gauge - Oil level sensor in tank and temperature sensor - Control cabinet with SIEMENS PLC touchscreen control - Operating hours counter - Screw channel mixer for material feeding - Material hopper (L x W x H): 1880 x 1880 x 1030 mm - Voltage: 400 V / 50 Hz - Dimensions (L = 2000, W = 1600, H = 1500 mm) - Weight: 1550 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1700 x 1170 x 1510 mm Weight: 650 kg Total Power Requirement: 6 kW Briquetting Press BP-60 - Briquette diameter: 60 mm - Hydraulic motor: 5.5 kW - Throughput: 15–70 kg/h - Cylindrical material hopper Ø 1000 mm - 7 cycles/min - Maximum briquette length: 60 mm - Pressure gauge - Oil level sensor in tank and temperature sensor - Control cabinet with SIEMENS PLC touchscreen controller - Operating hours counter Ledpfjvz Eqfox Af Iehb - Voltage: 400 V / 50 Hz - Level sensor for automatic shut-off - Chrome-plated tongs - Dimensions L=1700, W=1170, H=1510 mm - Weight: 650 kg

Sąlyga: naujas, For the industrial production of rectangular briquettes The ZBP 500 briquettes pressable materials into highly compressed briquettes. The briquettes are easy to store and, thanks to their stackability, easy to transport. In the press chamber of the hydraulic press unit, the briquettes are formed by a pressure cylinder. This allows for the production of up to nine briquettes per minute with a pressing force of 1 kg/cm². Ljdpfxjghgcqj Af Iohb Standard equipment: - Safety limit switches for oil temperature and level - Oil cooler - Automatic briquette length monitoring - Automatic fill level monitoring for hopper - Control cabinet with PLC control for fully automatic operation Options: - Hopper extension individually available according to customer requirements - Press stamp with custom inscription / logo

Sąlyga: naujas, The briquette press is designed for compressing all types of sawdust and wood shavings into briquettes. Its construction is compact, user-friendly, and manufactured in Germany. The large oil tank enables continuous operation. The briquette press is ready for immediate use—simply plug it in and start working. Lhjdpfokyza Djx Af Isb