Briketavimo presas Aliuminio briketavimo presas
mütek MPP NEM 90

Name: mütek MPP NEM 90
Brand: mütek
Availability: InStock

Gamybos metai

2023

Sąlyga

Naudotas

Vieta

Neckartailfingen Vokietija

Briketavimo presas Aliuminio briketavimo presas mütek MPP NEM 90

Rodyti žemėlapį

Duomenys apie mašiną

Įrenginio aprašas:: Briketavimo presas Aliuminio briketavimo presas

Gamintojas:: mütek

Modelis:: MPP NEM 90

Gamybos metai:: 2023

Sąlyga:: dilaminuotas dirbtuvėje (naudotas)

Kaina ir vieta

Vieta:: Grienweg 38, 72666 Neckartailfingen, Deutschland

Skambinti

Pasiūlymo informacija

Sąrašo ID:: A4054374

Naujinta paskutinį kartą:: Data 2025.08.06

Aprašymas

All wear parts new
only 704 operating hours

Special price for a slightly used demo machine
Base machine: €29,990 net

Options at extra cost:
- Cooling unit: €3,995 net
- Emulsion tank: €3,990 net

The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, which ensures consistent briquette quality even in continuous operation. The pressing process takes place without the addition of binding agents, relying solely on hydraulic pressing force. The volume of the input material can be reduced by up to 90%, depending on the material.

Throughput rate: up to max. 70 kg/h (depending on material)
Briquette diameter: Ø 50 mm
Motor: 5.5 kW
400 Volt / 50 Hz / 3-phase
Pump: 40 litres

Max. briquette length: 50 mm
Opt. briquette length: 40 mm
Silo diameter: 1,000 mm
Oil tank: 110 litres

Dimensions: 1750x1130x1100 mm (LxWxH)
Weight: 950 kg

Hydraulic pre-compaction via slide
Main press cylinder
Vertical cylinder

Level sensor: yes

Nsdsd N Dnhopfx Afrsdd
Requirements for input material
- Max. chip length: 15 mm
- Installation temperature: temperature-controlled room, minimum +5°C
- Max. load on agitator: 150 kg
- The material feed must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Dokumentai

4054374-01.pdf

Tiekėjas

Registruota nuo: 2005

47 Skelbimai internetu

Skambinti

Pateikti užklausą

Telefonas & Faksas

+49 711 5... skelbimai

+49 711 9... skelbimai

Faksas:

Šie skelbimai taip pat gali jus sudominti.

mažas skelbimas

Horizontalios tekinimo staklės NAKAMURA-TOME WT-100

Italija

1 694 km

Horizontalios tekinimo staklės
NAKAMURA-TOMEWT-100

Skambinti

Gamybos metai: 2011, veikimo valandos: 23 747 h, Sąlyga: paruoštas naudoti (naudotas), Allgemeine Daten Maschinengewicht: 5650 kg Steuerung Hersteller: FANUC Modell: 31i Model A Hauptantrieb Spindeldrehzahlbereich: 6000 min⁻¹ Spindelmotorleistung: 11/7,5 kW Nedewn N Rbepfx Afrsdd Revolver Anzahl der Revolver: 2 Anzahl der Werkzeugplätze pro Revolver: 12 Medien Späneförderer: Ja Zusätzliche Ausstattung Stangenlader TOP AUTOMAZIONI FU 342 Diese 3-achsen NAKAMURA-TOME WT-100 Drehmaschine wurde 2011 gebaut. Sie verfügt über eine CNC-Steuerung FANUC 31i Model A, eine Drehlänge von 503 mm und einen maximalen Drehdurchmesser von 190 mm. Die Maschine ist mit zwei angetriebenen Revolvern mit je 12 Werkzeugstationen, einer Stangendurchlasskapazität von 42 mm sowie einem Stangenlader TOP AUTOMAZIONI FU 342 ausgestattet. Wenn Sie hochwertige Drehbearbeitung suchen, empfehlen wir Ihnen die NAKAMURA-TOME WT-100, die wir zum Verkauf anbieten. Kontaktieren Sie uns gerne für weitere Informationen. Anwendungsbereiche Drehen

Peržiūrėti detales

mažas skelbimas

Kibirkščių spektrometras SPECTRO LAVMC05A SPECTROLAB

Kölleda

952 km

Kibirkščių spektrometras
SPECTROLAVMC05A SPECTROLAB

Skambinti

Sąlyga: geras (naudotas), Gamybos metai: 2003, mašinos/transporto priemonės numeris: 4N1028, bendras svoris: 300 kg, bendras ilgis: 1 400 mm, bendras aukštis: 1 520 mm, bendras plotis: 780 mm, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 230 V, Įranga: Tipinė plokštelė prieinama, SPECTRO LAVMC05A SPECTROLAB spark emission spectrometer, metal analyzer Input: 230 VAC / 50 Hz Power: 2500 VA Ndsdpsvytalefx Afred

Peržiūrėti detales

mažas skelbimas

CNC tekinimo-frezavimo centras Index R 200

OIching

1 157 km

CNC tekinimo-frezavimo centras
IndexR 200

Skambinti

Sąlyga: naudotas, Description: General: Year of manufacture: 2009 Control system: Siemens 840 Dsl (C200-4D SL) Bar capacity: 65 mm Milling spindles: 18,000 rpm Main spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 35.5 kW Max. torque: 170 Nm C-axis: 0.001° Z-axis: 390 mm Bar capacity: 65 mm Clamping cylinder: Hollow clamping cylinder Chuck: 3-jaw chuck Sub spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 35.5 kW Max. torque: 170 Nm C-axis: 0.001° X-axis: 600 mm Z-axis: 390 mm Bar capacity: 65 mm Chuck: 3-jaw chuck Tool carrier I: Technology: Milling spindle on cross slide Speed: 18,000 rpm Tool interface: HSK 40 X-axis: 350 mm Y-axis: 160 mm (+/- 80 mm) Nsdpfx Ajvxmy Njfrsdd B-axis: 230° Tool carrier II: Technology: Milling spindle on cross slide Speed: 18,000 rpm Tool interface: HSK 40 Y-axis: 160 mm (+/- 80 mm) B-axis: 230° Tool magazine: Technology: Chain magazine Number of stations: 80 pcs Tool changer: Double gripper Max. tool length: 180 mm Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system with filter Parts removal: Gantry loader Bar loader interface: Electrically prepared Tool monitoring: Drill breakage control

Peržiūrėti detales

mažas skelbimas

Briketavimo presas WEIMA C 140 - sofort verfügbar - Vorführgerät

Bitburg

1 305 km

Briketavimo presas
WEIMAC 140 - sofort verfügbar - Vorführgerät

14 900 €

fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: naujas, Gamybos metai: 2024, Super special price, as this machine was used during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale. Once it’s gone, it’s gone. Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, styrofoam, foam, or paper. A distinctive feature: the screw pre-compaction system ensures high briquette quality. For fast and easy installation, the C 140 is mounted on a stable base frame. Dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30–40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press - Powerful pressing mechanism with low-wear, chrome-plated clamp - Pre-compactor with end-position damped cylinder and bolted cover - Control cabinet with PLC control Hydraulics - Separate oil tank with pump motor and valve control - Safety switch for oil temperature Container with agitator and geared motor - Screw channel with discharge auger and geared motor Ndedpfxelht H Es Afrsd Accessories: - Briquette length monitoring, automatic on/off Location: 54634 Bitburg

Peržiūrėti detales

mažas skelbimas

Vokietija

999 km

Presas
Höma MaschinenbauBP 4000

Skambinti

Gamybos metai: 1994, Sąlyga: paruoštas naudoti (naudotas), Engine power: 15.5 kW / 19.5 kW, pressing force: 320 kN, specific pressure: 425 kN/m², machine dimensions (L/W/H): approx. 5700 mm / 1900 mm / 1800 mm, weight: approx. 6000 kg. The machine is exhibiting a fault due to moisture and should be inspected. Nedpfxoip D Rpo Afrodd

Peržiūrėti detales

mažas skelbimas

Velbert

1 194 km

Presas
HSMVK 4812

Skambinti

Sąlyga: geras (naudotas), Gamybos metai: 2011, veikimo valandos: 20 580 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 48 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 250 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 450 kg, įėjimo srovė: 59 A, bendras svoris: 12 000 kg, transporto aukštis: 2 750 mm, alyvos bako talpa: 300 l, galia: 30 kW (40,79 AG), transporto plotis: 2 300 mm, transporto ilgis: 8 500 mm, bakelio talpa: 300 l, Good day, We hereby offer you, subject to prior sale, a used baling press manufactured by HSM, type VK 4812. The following technical data is taken from the manufacturer's operating manual and brochures; we cannot guarantee the accuracy or completeness of this information. Manufacturer: HSM Type: VK 4812 Year of manufacture: 2011 Operating hours: 20,580 hours Pressing force (main press): 48 t Drive power: 30 kW Machine weight (press): 12 t The machine documentation is available in German. An inspection is possible by appointment at our workshop. We would be pleased if this machine is of interest to you. Ndsdet H Rcaspfx Afred Your service team at Mertens & Frowein GmbH

Peržiūrėti detales

mažas skelbimas

5 ašių universalus apdirbimo centras GROB-WERKE G350 access-SERIE

Mindelheim

1 215 km

5 ašių universalus apdirbimo centras
GROB-WERKEG350 access-SERIE

Skambinti

mažas skelbimas

Smulkinimo įrenginys Panizzolo mobil Flex 1000

Mannheim

1 218 km

Smulkinimo įrenginys
Panizzolomobil Flex 1000

Skambinti

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2018, Mobile hammer mill Mobil Flex 1000 with drum magnet and discharge conveyor Drive: 250 kW electric motor 4 hydraulic outriggers for lifting the machine during transport Total weight: 33,000 kg Rotor weight: 3,000 kg Production capacity: up to 11 t/h (depending on material size, screen size, and parameter settings) with soundproof enclosure Dimensions: 11,750 x 2,500 x 4,380 mm Number of hammers: 24 units Hammer weight: 22 kg the machine is being overhauled Ndodpfeph Uy Tsx Afrsd

Peržiūrėti detales

mažas skelbimas

Vibracinė apdailos mašina GERD WOLFF VKUE 200

Ennepetal

1 181 km

Vibracinė apdailos mašina
GERD WOLFFVKUE 200

Skambinti

Gamybos metai: 2023, Sąlyga: naujas, IMMEDIATE AVAILABILITY! Vibratory Finishing Machines with Separator The machines of the VKUE series can be used for surface processing of both metallic and non-metallic workpieces. Nedpfxjn Smbre Afrsdd These machines feature a large screening area, allowing for easy separation of workpieces from the grinding media. Optional Accessories - Pneumatic sound cover - Pneumatic flap control - Frequency control - Dosing pump - Magnetic valve - Basic control panel - Rinse pipe (various types) Images are for reference only. Optional accessories are available at an additional cost.

Peržiūrėti detales

mažas skelbimas