Briketavimo presas Weima TH 400 1998

Weima TH 400

Sąlyga: geras (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, WEIMA TH 400 Briquetting Press – after technical inspection – German production – very good condition – year of manufacture: 1992 TECHNICAL SPECIFICATIONS: Main motor power: 7.5 kW Machine throughput: approx. 80 kg/h Briquette diameter: 50 mm Feed hopper dimensions: 2000 x 1800 mm Screw conveyor feeding material to the piston Agitator Machine dimensions (L/W/H): 240 / 190 / 200 cm Weight: ~ 850 kg WEIMA TH series hydraulic briquetting presses are compact devices for briquette production. The presses can be filled manually or automatically directly into the hopper. Thanks to their compact size and quiet operation, machines from this series are ideal for installation on a production floor. Features: – reduction of production waste volume – low purchase cost – low energy consumption – compact design takes up little space – excellent quality of processing – durable construction and long service life – trouble-free maintenance and low wear – easy operation Lredpst U Et Nefx Af Iog Main application areas for briquetting presses include, for example: – in combination with dedusting or filtration and extraction systems – for manual material feeding – as a unit combined with a shredder (e.g., WEIMA WL4) – with a screw or belt conveyor – with a mobile extraction system or combustion furnace

Sąlyga: naujas, Gamybos metai: 2025, Dar viena mašina iš karto prieinama! Briketų presas su PLC valdymu ir automatine briketų ilgio kontrole Našumas: iki 60 kg/h Briketas: 50 mm cilindrinis Variklis: 5,5 kW Matmenys: 1.900 x 1.350 x 1.410 mm Svoris: apie 860 kg Reikalavimai: Lodpfx Afev Rpxlo Iorg Išeitinė medžiaga idealiai trumpesnė nei 25 mm drožlių ilgio Drėgnumas 6–12% ATRO Mašina tinkama nepertraukiamam darbo režimui. Pvz., briketavimas iki 2,5 val.; 1 val. pertrauka ir pan. Jei mašiną reikia eksploatuoti ilgiau nei 2,5 val. nepertraukiamai, būtina prijungti papildomą aušinimą.

Sąlyga: naujas, Wood Briquette Press Amis ABP 60 L - Demonstration Machine - ----- Technical Data ----- Briquette diameter: 60 mm Hydraulic unit: 3 kW, 140 bar Voltage: 400 V Lredpfx Afeu R Sxxe Iog Frequency: 50 Hz Fuse: 16 A Output approx.: 20–35 kg/h Weight approx.: 300 kg - Extremely easy operation - Hydraulic control - Briquette diameter: 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as controllers, sensors, or complicated controls - Large storage hopper - Hardened briquette tongs - Exchangable pressing rod - Pressing without addition of binding agents - Thanks to the pre-compressor, even bulky shavings can be processed - No adjustments or pressure monitoring necessary - New demonstration machine -

Sąlyga: naudotas, Gamybos metai: 2009, BRIQUETTING MACHINE PRODECO MOD. L70 – CE COMPLIANT – USED - Briquette diameter: 70 mm - Output: 50-120 kg/h - Serial no.: 89 - Year: 2009 - Complete with manual Lrjdowrddqjpfx Af Iog

Sąlyga: beveik kaip naujas (naudotas), The MSP 120 ZK is ideally suited for the shredding and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder consists of a hydraulic chip press and a preceding shredder, which are precisely matched to each other. The system allows for the reduction in size and compaction of chips generated during turning/milling processes. The volume is significantly reduced, and the briquettes are separated from coolants (coolant emulsion, oil) that may have been absorbed during prior machining stages. The system consists of a feed hopper into which the material to be processed is introduced, and an integrated shredder that reduces the length of the chips. A conveyor system continuously and gradually transports the shredded chips via a conveyor belt into the hopper of the chip press. Here, two screw conveyors transport the material into the compaction chamber. The system includes a monitored liquid collection tank and a pump. The coolants can be returned to the production process. Cycle control is managed via a PLC and an electronic level sensor for monitoring the fill level in the hopper. Optionally, a tipping device for manual filling of the system can be added if required. Briquetting Press: Throughput (Aluminium): 15-20 kg/h Throughput (Steel, Copper): 45-60 kg/h Ø Briquettes: 60 mm Productivity: 120-180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank capacity: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Cutter shaft: 1 pc Motor power: 5.5 kW Number of cutters: 16 pcs Cutters replaceable: yes Cutter size: 25 mm Cutter material: Hardened steel Shaft length: 400 mm Screen size: 20 mm Ø Feed hopper dimension: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power connection: 380V Lrsdpsw R Ranjfx Af Ijg Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured paint RAL 7035 light grey

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: HaRo2020, bendras plotis: 800 mm, bendras aukštis: 1 100 mm, bendras ilgis: 1 200 mm, briketo skersmuo: 60 mm, bendras svoris: 300 kg, garantijos trukmė: 12 mėnesiai, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 400 V, galia: 3 kW (4,08 AG), Įranga: avarinis stabdymas, Our new HaRo2020 briquetting press with a capacity of up to 40 kg/h, automatic clamp, and pre-compactor is manufactured in-house. You can only purchase the machine directly from us, excluding any middlemen. The briquetting presses are CE-compliant and produced according to the latest regulations. Since we manufacture most of the components ourselves, we can produce the machine at a particularly competitive price. The price is plus VAT. The new hydraulic unit is equipped with a SILENCE PUMP, making the machine almost silent in operation. Another advantage of the helical gearing in the pump is its durability. Everything is Made in Germany! You are welcome to visit us and test the machine with your own material. When purchasing our briquetting press, you will receive a detailed and comprehensive German manual (PDF) for the operation of this machine. The material to be pressed must have a moisture content below 15%—ideally between 10% and 12%—suitable for sawdust and planer shavings. Technical Data - Hydraulic unit: 3.0 kW (connection power) - Power consumption per hour approx. 1.8 – 2.0 kWh - Output: approx. 15 – 40 kg/h - Voltage: 400 V - Frequency: 50 Hz - Fuse: 16 A plug - Power cable: 3 m - Hydraulic control system with Bosch Rexroth valves - Briquette diameter: 60 mm (length varies depending on material) - Motor equipped with motor protection and emergency stop for the safety of operators and the machine itself - No susceptible electronic components like controllers, sensors, probes, or complex control systems Lrodpfx Afow A Hvds Ijg - Operation without any additives - Counterpressure automatically adjusts to your material - The pre-compactor allows trouble-free processing of voluminous shavings - No adjustments or pressure monitoring required - Fully automatic operation Spare parts are readily available because we produce the machines in small series in-house in GERMANY. The large oil tank ensures that the oil does not overheat during continuous operation. Machine Dimensions Length: 1.25 m Width: 0.82 m Height: 1.11 m Hopper: Diameter approx. 80 cm x height 60 cm Weight: 300 kg The briquetting press is ready to use immediately and does not require any installation—just plug it in and start. The machine can be inspected and tested. You are welcome to send us a sample of your material for testing; this is the most efficient way.

Sąlyga: naudotas, Gamybos metai: 2019, Used machine Equivalent to Weima C 150 Year of manufacture: 2019 1845 operating hours Features and technical data: Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput capacity: up to 50 kg/h (depending on material) Connection data: 400 V +/- 5% / 50 Hz Included: - Press mechanism with filling cylinder, main cylinder, clamping cylinder - Connection part for transport pipe - Chrome-plated clamp - Hydraulic tank 160 l with pump motor + valve control - Safety switch for oil temperature - Control cabinet and electrical control system - Briquette length monitoring - Automatic end position for all cylinders - Manual control - Automatic "On/Off" with level sensor switch Material: planer shavings, sawdust from solid wood, loose, clean, and free from foreign substances * Dimensions: max. 10 mm * Throughput: approx. 50 m³/year/ * Specification for foreign substances: Anything other than wood, wood pieces larger than 15 mm. Throughput capacity is highly dependent on material type. The stated values are averages. Actual performance may vary depending on blend ratio, moisture, and material characteristics! Application case not or not fully known/indicated. Machine is being sold appropriately and solution-oriented by a specialist dealer. With oil cooler or water cooling; ensure sufficient ventilation for the press/unit/oil cooler. In the case of heat accumulation, runtime may be drastically reduced depending on temperature rise. Lrjdpfx Aew Rhk Def Iog Supplied with new press clamp. Availability: by arrangement Stock location: Flörsheim

Sąlyga: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, BRIKETTIER- UND PELLETIERTECHNOLOGIE: Maschinentyp: BS70 Brikettierausrüstung Die Brikettierpresse vom Typ BS70 kann vielseitig zur Verarbeitung von natürlich nachwachsenden Rohstoffen zur Herstellung neuer, veredelter Handelswaren eingesetzt werden. Mit dieser Ausrüstung werden Materialien wie Stroh, Hülsenfrüchte, Heu, Papier, Holz sowie andere Naturstoffe und deren Mischungen verarbeitet und gepresst. Der Hersteller konstruiert das Gerät entsprechend dem jeweils zu verarbeitenden Produkt. Der Feuchtigkeitsgehalt der zu verarbeitenden Rohmaterialien darf maximal 10-12% betragen und keinerlei Fremdstoffe (Metall, Kies, Sand usw.) enthalten. Das Pressen erfolgt ohne Zugabe von Zusatzstoffen oder Bindemitteln, lediglich durch den Pressvorgang, bei dem – abhängig vom Ausgangsmaterial – eine Dichte von über 1 kg/dm³ erreicht werden kann. Das entstehende Endprodukt wird automatisch in die Lagerbehälter abgelegt – es ist kein manuelles Handling erforderlich – und eignet sich für den Dauerbetrieb. Dies wird durch 4 Brikettierpressen (Brikettierdurchmesser 70 mm) und 1 Pelletiermaschine (Pelletdurchmesser 6 mm) ermöglicht, die in einer Halle mit den Maßen 15 x 20 x 6,3 Meter installiert werden können. Die Anlage ist für einen Einsatz von 16 Arbeitsstunden pro Tag konzipiert, mit 2 x 7 Stunden durchgehenden Betrieb innerhalb dieses Zeitraums. Das System besteht aus folgenden Einheiten: - KSD900 Strohhacker (2 Stück) - AVSZ70 Automatische Steuerung zur Materialaufbereitung (2 Stück) - Schneckenförderer (3 Stück) - Trogschneckenförderer (2 Stück) - CSV70 Rohrleitung (2 Stück) - PFK70 Absaugung und Staubfilter (1 Stück) - PF70 Staubfilter (1 Stück) - ST70 Silotank (6 m³) (2 Stück) - BS70 Brikettpresse (4 Stück) Der Presskolben verdichtet das Material in einem konischen Rohr und erzeugt einen kontinuierlichen Stab mit 70 mm Durchmesser. Der Druck ist einstellbar, ebenso wie die Vorschubgeschwindigkeit der Förderschnecke. Der Wechsel der Presswerkzeuge ermöglicht die Regulierung der Qualität und Dichte der hergestellten Briketts. Für unterschiedliche Rohmaterialien liefern wir diverse Pressvorrichtungen, die auf Wunsch vor Auslieferung getestet werden – sofern der Kunde Materialmuster stellt. Durch den Austausch der Presswerkzeuge eignet sich die Anlage auch für die Herstellung von Streu, die lose Verpressung von Futtermitteln oder die Erzeugung von Mischungen als Option. Das Material wird ohne Bindemittel oder chemische Zusätze verpresst. Je nach Dichte des Ausgangsmaterials entstehen unterschiedliche Produkte, deren spezifisches Gewicht 1 kg/dm³ überschreiten kann. Die Leistungsfähigkeit der Pelletier- und Brikettiereinheit beträgt auf Basis von Weizenstroh 1,5 t/h. Leistung und Produktqualität werden durch die regelbare Schraubgeschwindigkeit und den einstellbaren Pressdruck – jeweils abgestimmt auf die Qualität des Rohstoffs – bestimmt. Elektrischer Leistungsbedarf: 37+10 kW. - Pressrohr (4 Stück) - Rippentransportband (1 Stück) - HF70 Steuerung der Kühl-/Heizbetriebstemperatur (4 Stück) - AVP70 Steuerung (4 Stück) Ledjubb Ubepfx Af Iorg Pelletiertechnologie für Biomasse: Das hergestellte Endprodukt sind 6-mm-Pellets, 10-40 mm lang. Zu verarbeitender Rohstoff: Heu, Stroh. Feuchtigkeitsgehalt: max. 10 % Die Pelletproduktion umfasst: Vorzerkleinerung (Trocknen), Zerkleinerung, Dosieraggregat, Befeuchtung, Pelletierpresse, Kühlsystem, Sieb, Filter und manuelle Absackung. Maschinentyp: MiniPell (1 Stück) Maschinenleistung: 50-120 kg/h Pressenantrieb: 10 k

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1700 x 1170 x 1510 mm Weight: 650 kg Total Power Requirement: 6 kW Lredjvz Eqfepfx Af Ijg Briquetting Press BP-60 - Briquette diameter: 60 mm - Hydraulic motor: 5.5 kW - Throughput: 15–70 kg/h - Cylindrical material hopper Ø 1000 mm - 7 cycles/min - Maximum briquette length: 60 mm - Pressure gauge - Oil level sensor in tank and temperature sensor - Control cabinet with SIEMENS PLC touchscreen controller - Operating hours counter - Voltage: 400 V / 50 Hz - Level sensor for automatic shut-off - Chrome-plated tongs - Dimensions L=1700, W=1170, H=1510 mm - Weight: 650 kg

Sąlyga: paruoštas naudoti (naudotas), engine power 5.5 kW diameter of briquette 80 mm sawdust level sensor operating hours 6363 h hopper diameter 1200 mm Lredpswd R Aqsfx Af Isg adjustable feed quantity year of manufacture 1996 power supply 380 V