Kragarmregal Ohra 3M Höhe Konsolinis Stovas "Ohra pirkti naudotą (4 141)

Būklė: geras (naudotas), Konsoliniai stelažai OHRA, 3 m aukščio Sandėlyje yra daugiau nei 100 m, žr. nuotraukas. Aukštis 3 m Konsolės ilgis 100 cm Didžiausia apkrova vienai konsolei 800 kg 4,5 m ilgio, 4 vnt. stulpai su konsolėmis Pardavimo kaina: 2 360 € / be PVM Pasiūlyme yra: 4 vnt. stulpai su pagrindais, 3 m aukščio 4 reguliuojamos konsolės, po 100 cm kiekvienam stulpui, didžiausia apkrova 800 kg vienai konsolei. Į kainą įskaičiuoti įstrižiniai atraminiai elementai, stabilizatoriai ir tarpikliai. Stelažų atstumas 150 cm Didžiausia apkrova vienam stulpui vienoje pusėje 3 200 kg Galimi aukščiai: 2,5 m, 4 m arba 6 m Kitos konfigūracijos pagal užsakymą. Nuolat sandėlyje yra daugiau nei 3000 m palečių stelažų iš įvairių gamintojų. Transportas ir montavimas galimi pagal užsakymą. (Pasiliekame teisę keisti technines specifikacijas, duomenis ir kainas, taip pat atlikti tarpinę pardavimą! Žr. mūsų bendrąsias sąlygas, visos kainos nurodytos be PVM, iš sandėlio). Lenox Trading – aukštos kokybės sandėliavimo įranga ir sunkiųjų krovinių stelažai, nauji ir naudoti. Aprašymas: Ieškote aukštos kokybės sandėliavimo stelažų? „Lenox Trading“ yra vienas didžiausių naujų ir naudotų sandėliavimo įrangos tiekėjų DACH regione (Austrija, Vokietija, Šveicarija), kuriame dirba apie 100 darbuotojų. ⚡ GREITAS PRISTATYMAS: • Daugiau nei 10 000 metrų stelažų galima pristatyti nedelsiant. • 20 000 m² sandėlio platformos ir plieninės konstrukcijos platformos yra iš karto. • Kas savaitę apdorojama 30–50 vilkikų su kroviniais, kad būtų pasirinkimas. 📦 MŪSŲ ASORTIMENTAS (PATOGU PIRKTI INTERNETU): Nesvarbu, ar ieškote palečių stelažų, sunkiųjų krovinių stelažų, aukštų stelažų, lentynų stelažų, padangų stelažų ar stelažų IBC konteineriams – mes pristatome ir montuojame visoje Europoje su mūsų PATIESIŠKA komanda! Įskaičiuota CAD planavimas, transportavimas, demontavimas ir montavimas. 🏭 GERIAUSI PREKŲ ŽENKLAI NAUDOTI IR IŠ BANKROTO / KONKURSŲ: • SSI Schäfer (Schäfer sandėliavimo technika, R 3000, PR 600, PR 300) • Jungheinrich (MPB tipas, E tipas, Jungheinrich sunkiųjų krovinių stelažai) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Konsoliniai stelažai (Elvedi konsoliniai stelažai, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 MŪSŲ KITAS VEIKLOS SRITIS: INTERNETO AUKCIONAI IR PERDIRBIMAS Atlikdami demontavimo ir išvalymo darbus, siūlome tikrą „viskas įskaičiuota“ paketą: Bdjdocd Dwyepfx Alwsg 1. Bendras pirkimas: prekės, įranga ir visų sandėlio atsargų pirkimas, įskaitant švarų išvalymą. 2. Aukcionas su komisiniu atlygiu: aukcionų organizavimas pagal užsakymą. Mūsų pilnas aptarnavimas, kurį atlieka mūsų darbuotojai: katalogavimas, biuro paruošimas, apžiūra, prekių išdavimas, logistika, demontavimas ir švarus išvalymas. Nesvarbu, ar pastebėjote mus dėl sunkiųjų krovinių stelažų, ar ieškote cinkuoto sunkiųjų krovinių stelažo / sunkiųjų krovinių stelažų sistemos – garantuojame geriausias sąlygas. Susisiekite su mumis ir gausite pasiūlymą, kuris nėra privalomas!

Būklė: naujas, OHRA konsolinis lentynų stelažas Pasiūlymo kaina: 6 540,00 € (be PVM), iš sandėlio Pasiūlykite už lentynų stelažą, kurio ilgis 7,5 m, sudarytą iš: 6 stulpų su pagrindais, 6 m aukščio + 4 reguliuojami konsoliniai laikikliai kiekvienam stulpui (120 cm), didžiausia apkrova 900 kg/laikiklis. Bdodpfoby Uunex Alwsg Įskaičiuoti įstrižiniai atraminiai elementai, stabilizatoriai ir atstumas. Tilteliai, grotelės ir medžio skydai parduodami atskirai už papildomą kainą! Atstumas tarp rėmų 150 cm Laikiklio ilgis / konsolė 120 cm Didžiausia apkrova 900 kg / laikiklis Didžiausia apkrova vienam stulpui vienoje pusėje 3 600 kg Galima įsigyti daugiau nei 100 metrų. Yra 2,5 m, 3 m arba 4 m aukščio stelažai. Kitos konfigūracijos pagal užsakymą. (Pasilieka teisę keisti ir klaidingai nurodyti techninius duomenis, specifikacijas ir kainas, taip pat parduoti iš sandėlio! Žr. mūsų bendrąsias sąlygas, visos kainos nurodytos be PVM, iš sandėlio). Lenox Trading – aukštos kokybės sandėliavimo įranga ir sunkiųjų prekių lentynų stelažai, nauji ir naudoti Aprašymo tekstas: Ieškote aukštos kokybės sandėliavimo lentynų? Lenox Trading, turėdama apie 100 savo darbuotojų, yra vienas didžiausių naujos ir naudotos sandėliavimo įrangos pardavėjų visoje DACH regione (Austrija, Vokietija, Šveicarija). ⚡ GREITAI PRISTATOMA: • Daugiau nei 10 000 metrų lentynų galima greitai pristatyti • 20 000 m² sandėliavimo platformų ir plieninių konstrukcijų platformų yra iškart • Kas savaitę pristatoma 30–50 vilkikų su priekabomis, todėl pasirinkimas yra didžiausias 📦 MŪSŲ ASORTIMENTAS (PIGIAI PERKATE INTERNETU): Nesvarbu, ar ieškote paletinių lentynų, sunkiųjų prekių lentynų, aukštų lentynų, lentynų su lentynomis, padangų lentynų ar lentynų IBC konteineriams – mes pristatome ir montuojame visoje Europoje naudodamiesi mūsų PAČIA komanda! Įskaičiuota CAD planavimas, transportas, išmontavimas ir surinkimas. 🏭 GERIAUSI NAUDOTI IR IŠ NUOSAVOS / BANKROTO PREKĖS: • SSI Schäfer (Schäfer sandėliavimo įranga, R 3000, PR 600, PR 300) • Jungheinrich (MPB tipas, E tipas, Jungheinrich sunkiųjų prekių lentynų stelažas) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Konsoliniai lentynų stelažai (Elvedi konsoliniai lentynų stelažai, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 MŪSŲ ANTROJI VEIKLOS SRITIS: INTERNETINIAI VARŽYTINAI IR PARDAVIMAS Atlikdami išmontavimo ir išvalymo darbus, siūlome visapusišką aptarnavimą: 1. Bendrasis pirkimas: perkame prekes, įrangą ir visas sandėlio atsargas, įskaitant išvalymą. 2. Komisiniai varžytinai: organizuojame varžytinus. Mūsų visapusiškas aptarnavimas, kurį teikia mūsų darbuotojai: katalogavimas, biuro įrengimas, apžiūra, prekių išdavimas, logistika, išmontavimas ir išvalymas. Nesvarbu, ar pastebėjote mus dėl sunkiųjų prekių lentynų, ar ieškote cinkuotų sunkiųjų prekių lentynų / sunkiųjų prekių lentynų sistemos – garantuojame geriausias sąlygas. Susisiekite su mumis ir gausite nesaistantį pasiūlymą!

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. Bjdefdkbhopfx Alwsdg When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany Bdsdpjguk Dksfx Alwog - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, This single-sided heavy-duty cantilever racking system is ideal for storing heavy long goods such as pipes, profiles, metal rods, steel beams, wooden strips, and sheet material. With an overall length of approx. 13.20 linear meters, a height of approx. 4.00 m, and cantilever arms measuring approx. 120 cm, the racking provides a high storage capacity across a total of 4 storage levels (base level + 3 tiers). Each cantilever arm supports up to 500 kg, and each upright has a load capacity of up to 2,250 kg. The cantilever arms are bolted and their height can be flexibly adjusted in 200 mm increments thanks to a perforated upright grid. The fully hot-dip galvanized finish ensures long-lasting protection for both indoor and outdoor use – New item available ex-stock Wietmarschen. PRODUCT DETAILS: - Rack type: Single-sided heavy-duty cantilever racking - Total length of racking row: approx. 13.20 m - Total height: approx. 400 cm Bdsdpfszxd Rusx Alwog - Arm length: approx. 120 cm (made from IPE 80) - Upright spacing (center-to-center): approx. 131 cm - Levels: Base level + 3 storage tiers - Load capacity per arm: max. 500 kg (with even load distribution) - Load capacity per upright: max. 2,250 kg (with even load distribution) - Upright profile: IPE 160, approx. 400 cm incl. base section - Upright hole pattern: approx. 20 cm spacing - First hole above base: approx. 107.5 cm (top of base) - Top hole pair: approx. 50 cm below upright head (top of upright) - Design: Single-sided, bolted cantilever arms - Finish: Fully hot-dip galvanized - Availability: New SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm, IPE 160 incl. base, 20 cm hole pattern - 33 x cantilever arms, approx. 120 cm, IPE 80 (without deflector) - Includes all connecting elements - Includes all required bolts - 1 x load capacity sign Price: €5,750.00 net €6,842.50 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery throughout Germany by our partner forwarding agent – freight costs depending on postal code - Professional assembly and disassembly by trained teams available on request - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding offer tailored to your requirements. Whether it’s a new build, conversion or expansion – we offer expert advice for your racking configuration. Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. Our telephone number can be found on our company page. We are available by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Būklė: naudotas, Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MING2/3/4/5/6/7, keliamoji galia vienai konsolės svirčiai: 1 000 kg, lentynos aukštis: 3 000 mm, bendras ilgis: 21 000 mm, bendras plotis: 2 150 mm, bendras aukštis: 3 000 mm, ašių atstumas: 1 480 mm, apkrova vienai atramai: 7 500 kg, lentyna ilgis: 21 000 mm, gerklės gylis: 900 mm, bendras svoris: 6 000 kg, Įranga: dvipusis, Ohra - double-sided cantilever rack for long goods, heavy-duty racking system Comprising 15 uprights + 60 cantilever arms Height: 3.05 m – uprights made from IPB200 (HEB200) – upright spacing 1.48 m (center-to-center) Bedpjv Smm Nsfx Alwsdg Total depth: 2.15 m (double-sided) Arms: 90 cm – IPE100 Load capacity per arm: 1000 kg Load capacity per upright: 7500 kg Wooden inserts can be supplied on request. Six racks available!!! 4 units with 4 levels – 60 arms each 2 units with 6 levels – 90 arms each, with an extra charge of 2,000 EUR Very good condition, see pictures Forklift available for loading Collection by appointment only in 75053 Gondelsheim Shipping via freight forwarder possible, please inquire with your postal code

Būklė: naudotas, Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MING8+10 / 9, keliamoji galia vienai konsolės svirčiai: 1 000 kg, lentynos aukštis: 3 000 mm, bendras ilgis: 21 000 mm, bendras plotis: 2 150 mm, bendras aukštis: 3 000 mm, ašių atstumas: 1 480 mm, apkrova vienai atramai: 7 500 kg, lentyna ilgis: 21 000 mm, gerklės gylis: 900 mm, bendras svoris: 6 000 kg, Įranga: dvipusis, Ohra - Double-sided cantilever racking for long goods, heavy-duty shelving Consisting of 10 uprights + 40 cantilever arms Height 3.05 m – Uprights IPB200 (HEB200) – Distance between uprights 1.48 m center-to-center Total depth 2.15 m (double-sided) Arms 90 cm – IPE100 steel profiles Load capacity per cantilever arm: 1,000 kg Load capacity per upright: 7,500 kg Wooden inserts can be supplied upon request. 3 racks available in total! Bdodpfx Aev Smrxolweg Nos. 8+10 – 4x with 4 levels – 40 arms No. 9 – 1x with 6 levels – 60 arms (plus €1,000 surcharge) Very good condition, see photos. Forklift available for loading. Collection by appointment only in 75053 Gondelsheim Shipping by freight carrier possible, please inquire with your postal code.

Būklė: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MING1+11, keliamoji galia vienai konsolės svirčiai: 1 000 kg, lentynos aukštis: 3 050 mm, bendras ilgis: 21 000 mm, bendras plotis: 2 150 mm, bendras aukštis: 3 050 mm, ašių atstumas: 1 900 mm, apkrova vienai atramai: 7 500 kg, lentyna ilgis: 21 000 mm, gerklės gylis: 900 mm, bendras svoris: 7 000 kg, Įranga: dvipusis, OHRA K60K – double-sided cantilever racking system for long goods / heavy-duty racking Two racks available! Bdjdjv Smk Ispfx Alwjg 12 uprights – 48 cantilever arms K60K Height: 3.05 m – uprights IPE200 – upright spacing 1.9 m center-to-center Total depth approx. 2.15 m (double-sided) Arms: 90 cm – IPE100 Load capacity per arm: 1,000 kg Load capacity per upright: 7,500 kg Including wooden inserts In very good condition, see pictures Forklift available for loading onsite Collection by appointment only in 75053 Gondelsheim Shipping via freight forwarding possible, please inquire with postal code

Būklė: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MING11, keliamoji galia vienai konsolės svirčiai: 1 000 kg, lentynos aukštis: 3 000 mm, bendras ilgis: 18 000 mm, bendras plotis: 2 000 mm, bendras aukštis: 3 000 mm, ašių atstumas: 1 500 mm, apkrova vienai atramai: 7 000 kg, lentyna ilgis: 21 000 mm, gerklės gylis: 900 mm, bendras svoris: 6 000 kg, Įranga: dvipusis, Cantilever rack, long materials rack, heavy-duty rack - double-sided Consisting of 13 uprights + 52 cantilever arms Height 3m - uprights IPE200 - upright spacing 1.5m center-to-center Total depth 2m (double-sided) Arms 90cm - IPE100 Load capacity per arm 1000kg Load capacity per upright 7000kg Bdodpfxev Smr Ss Alweg Arms are continuously adjustable Including cross-braces from arm to arm, including wooden shelves/inserts Very good condition, see pictures Forklift available for loading Collection by appointment only in 75053 Gondelsheim Shipping by freight forwarding possible, please enquire with your postcode

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: bolted system, hot-dip galvanized version Bodjmhhx Iopfx Alwodg Scope of delivery: - 4 racking uprights, height 3,000 mm, with base section, 1,200 mm useful depth - 12 cantilever arms, standard, 1,200 mm useful depth - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts re-orderable and expansion possible at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface: hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length: 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical way to enable easy unloading. When installed outdoors, the stated load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, and suitable for anchor bolts, and must be able to bear the applied loads. The floor structure, load-bearing capacity, and any necessary official approvals must be checked and provided by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German statutory accident insurance (BG) guidelines, it is recommended that the racking uprights have at least 500 mm of clearance above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including horizontal and diagonal braces for 1,300 mm frame spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Bedsmhh Dhjpfx Alwsdg - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking Used: Hot-dip Galvanised Bolted System Scope of Delivery: - 4 double-sided uprights, height 3,500 mm, each with 1,200 mm base plates - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre-to-centre distance - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed Description: - Robust steel construction made of IPE sections - Surface of all components hot-dip galvanised Bdedpemkixwsfx Alwog - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, each with 1,200 mm depth, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. The material is properly packaged to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, suitable for dowelling, and able to absorb the applied loads. Floor structure and load-bearing capacity, as well as any necessary official approvals, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized Bsdjh Ek Daspfx Alwjdg - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Bdsdpfx Alemhhf Sjwjg Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Bolted system in hot-dip galvanized version: Ex works price: Bdsdpomhhl Hsfx Alwjg Robust steel construction made from IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright fitted with 3 bolt-on cantilever arms, usable depth 1,200 mm, standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Including mounting material (without floor anchors) Complete with assembly instructions and C4 load capacity signs according to DIN standard

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Scope of delivery: Bjdpemhh Dtjfx Alwsdg 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standards - Expert technical advice by phone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever racking system in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 4,200 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm bay distance (4,000 mm racking length) Bodpomidyfofx Alwodg - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered, and extension is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Enzian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Per upright: 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per arm: 730 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - Supplied with assembly instructions and load capacity labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Local pickup available Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is well packaged for easy unloading. Delivery can take place approximately 1–2 weeks after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be made of concrete, level, suitable for doweling, and able to bear the applied loads. The floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional liability association guidelines, it is recommended that the uprights have at least 500 mm of clearance above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base sections, 1,000 mm useful depth Bdjdpfxsmhhyae Alweg - 12 cantilever arms, each with 1,000 mm useful depth, standard version - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available and extensions possible at any time) - (*Larger quantities available: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms each with 1,000 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 boltable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total rack length: 4,000 mm - Fastening material included (without floor anchors) - Comes with assembly instructions and C4 load capacity labels according to DIN standards - Expert technical support by phone - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical manner to enable easy unloading. If installed outdoors, load capacities are reduced due to wind and snow loads. The installation surface must be concrete, level, suitable for anchoring, and able to withstand the imposed loads. The client is responsible for verifying and ensuring ground condition, load-bearing capacity, and any necessary official permits. Rack uprights must be anchored to the floor on-site; wall anchoring is neither required nor recommended. According to trade association guidelines, the uprights of the rack should have a minimum overhang of 500 mm above the highest storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance Bedpfsmhhypjx Alwjdg - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. Bsdpfemhh Anox Alwsdg The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available at any time and system can be expanded - Larger quantities available: approx. 40 uprights in stock Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Professional telephone support Bdjdpsmhh Dzefx Alwjg - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance delivery notification. The material is packed in a way that allows easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level and dowel-able, and able to support the applied loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least 500 mm of overhang above the top storage level.

Būklė: naujas, The double-sided cantilever racking system from BLT with a height of 315 cm is ideally suited for storing medium-weight long goods such as profiles, pipes, and rods in warehouses, workshops, or craft businesses. With a rack length of approx. 5.12 m, a usable depth of approx. 80 cm, and a total of five levels per side including the foot level, this cantilever rack offers easy-to-access and well-organized storage spaces for long and bulky goods on both sides. Each cantilever arm is loadable up to 500 kg, and each upright up to 1,800 kg per side. The bolted cantilever arms with stoppers ensure robust and practical use for everyday operations. Made in Germany – Shipping within Germany is already included, plus VAT. Product details: - Rack type: Double-sided cantilever rack - Height: approx. 315 cm - Length: approx. 5.12 m - Total depth: approx. 174 cm - Bay width: approx. 128 cm - Cantilever arms: approx. 80 cm usable length (IPE80) - Usable depth at foot level: approx. 80 cm - Load capacity per arm: max. 500 kg (with evenly distributed load) - Load capacity per upright: max. 1,800 kg per side (without foot level, with evenly distributed load) - Levels per side: Foot + 4 storage levels (5 levels per side in total) - Design: Double-sided, bolted cantilever arms with stoppers - Upright profile: IPE140 Bdedpfxszxpd Hs Alwsg - Cantilever arm profile: IPE80 - Color finish: RAL 7016 - Manufacturing: Made in Germany - Delivery: Shipping within Germany included, plus VAT Scope of delivery: - 5 × Uprights made from IPE140, approx. 3,150 mm high - 40 × Cantilever arms, approx. 80 cm long, made from IPE80 - Including all fastening materials - Including heavy-duty anchors for floor fixing Advantages of BLT cantilever racking: - Ideal for storing medium-weight profiles, pipes, and rods - Double-sided design for storage that is accessible and usable from both sides - Bolted cantilever arms with stoppers - Five levels per side, including the foot level, for optimal space utilization - Up to 500 kg load capacity per arm and up to 1,800 kg load capacity per upright on each side - Stable floor fixing with supplied heavy-duty anchors - Made in Germany - Shipping within Germany included Delivery: - Shipping within Germany included - Delivery includes all fastening materials - Robust floor anchoring with included heavy-duty anchors Inquiry & individual planning: Take advantage of our personal consultation for your individual storage solution. Let us know your required dimensions, types of goods, and available space. Our experienced advisors will be happy to provide you with a non-binding quote, including custom planning and static calculation for your tailor-made cantilever racking system. Use our inquiry form or contact us directly by phone. Together, we will design your bespoke racking system.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Bdsdod Tbbdepfx Alwjg Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg Bdjdpfxsfdkb To Alwjg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Scope of Delivery: Bedsmhhy Nspfx Alwsdg - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.