Konsolinis stovas "Ohra

Kragarmregal OHRA 3m Höhe Ausleger 800 kg

Sąlyga: naudotas, Suspended Crane Runway Crane System DEMAG Type KBK 1 Year of manufacture: approx. 2000 Single-rail suspension track with single-girder bridge crane Light crane system made from KBK modular system profiles Lifting capacity: 125 kg Span: 5 meters Distance between longitudinal tracks: 4.1 meters Total length of longitudinal girder: 12 meters Crossbeam profile = KBK1 Longitudinal track profile = KBK1 Comprising: 29 meters of KBK-1 system profile (4 x 6000 mm + 1 x 5000 mm) Cedpfohrkrtex Admeaa 1 trolley for crane suspension 2 double trolleys for the longitudinal tracks 10 clamp brackets for crane suspension or ceiling mounting (without girder clamps) 6 end caps suitable for KBK1 running rails

Sąlyga: naujas, Sheet thickness 2.5 mm Roll diameter 98 mm Throat depth 160 mm Total power requirement 1.5 kW Machine weight approx. 0.35 t Space requirement approx. 550x1400x1500 mm Supplied with: • Manual version Caodpjfv H Ehsfx Admea • 4 sets of rolls • Foot control • Braking motor • Emergency stop

Sąlyga: naujas, Gamybos metai: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Caedpfji Hpk Usx Admoa Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Sąlyga: geras (naudotas), 10,000 Units of Insert Gratings / Wire Mesh Decks for Pallet Racking, Galvanised Insert gratings available in various sizes, mesh widths, load bars, and load capacities: Negotiable price: from €15.00 net per m² ex stock Larger quantities available on request! Specification Table: Insert Grating Size (cm) Mesh Size (cm) Load Bar Load Bar Direction 100.5 x 98.5 7 x 3.5 35 x 2.5 mm 100.5 cm 120 x 89.5 7 x 3.5 30 x 2.5 mm 120 cm 118 x 109 7 x 4.5 45 x 2.5 mm 118 cm 133 x 99 3 x 3 30 x 2 mm 99.5 cm 134 x 75 7 x 7 25 x 3 mm 75 cm 134 x 76.5 2.5 x 2.5 20 x 2 mm 75 cm 134 x 92 6.5 x 6.5 30 x 2 mm 92 cm 134.5 x 99.5 7 x 7 30 x 2 mm 99.5 cm 143.5 x 124 7 x 4.5 35 x 2 mm 124 cm Used goods, in very good condition. See pictures. Stock available. Transport can be arranged upon request. Inspection possible by appointment at any time. Further information available on request. We have over 5,000 linear metres of pallet racking from various manufacturers in stock at all times. Cedpfx Adjd Hvvbomeaa (Specifications, information, and prices are subject to change and errors. Subject to prior sale! See our General Terms and Conditions. All prices are exclusive of VAT ex works.) Purchase / Sale: We are constantly looking for or offering a variety of items from various sectors – Swept-clean clearance of business premises – Complete business liquidations – Fast – flexible – efficient! – We also clear out or dispose for insolvency administrators. Contact us with a few keywords and we’ll get back to you immediately. To visit our website, please click on our logo!

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, veikimo valandos: 31 h, 3D Coordinate CNC Measuring Machine Profitech Innometrik Advanced, Portal Design (Demo Unit at Special Price) Open Cable Special Features of the Portal Design: Portal construction with a low center of gravity, wide bearing spacing, and optimal ratio of rigidity to mass. Granitic guideways ensure consistent thermal, dimensional, torsional, and geometric stability of the machine. 24 air bearings provide smooth movement of all three axes. High dynamics for improved performance, with the machine achieving high accelerations comparable to medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, air filter and regulator included. Pneumatic counterbalance system for the Z-axis. Granite table with threaded inserts, size M10. Passive vibration isolation pads. Technical Data: Measuring range: X: 500mm Y: 600mm Z: 400mm Max. workpiece weight: 250kg Machine weight: 850kg Overall dimensions: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Caodpfx Aodyah Sjdmoa Volumetric length measuring deviation: MPEE = 2.2 + L / 350 (μm) Operating Environment: Standard room temperature: 18-22°C Operating temperature: 10-35°C Compressed Air Supply: Minimum air pressure: 6bar Air consumption: 90NI/min Configurable as a complete package with probe system, software, commissioning, and training. (Annual maintenance & calibration can also be offered)

Sąlyga: naujas, Gamybos metai: 2025, Įvairūs klijų bakai kraštų juostoms ir kraštų juostavimo mašinų keturkampiams apdirbimui. Tiekiame naujus klijų bakus arba remontuojame jūsų naudotus. Cedpfxef Tc Rqj Admjaa Taip pat parduodame atskiras atsargines dalis. SCM, Stefani, IDM, IMA, Biesse

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Cjdpfx Ajqt Dmysdmoaa Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Sąlyga: naudotas, Gamybos metai: 2014, Number of spindles: 5 pcs. Working width: 230 mm Planing height: 120 mm Surface table length: 2,500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Control: Memory function Weinig Powermat 600 Compact ----- Machine is cleaned and fully inspected. Casdpfx Adjwzmu Rsmea Brief summary: ----- - 5 spindles - Powerful motors - Left and top spindle controlled for width and height Detailed description: ----- Technical data: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 125 - 145 mm Tool circle diameter with rebate cutter: 130 - 160 mm Axial adjustment range: 5 mm Rebate device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital readout for radial adjustment 2nd spindle - right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter 40 mm below table level: 93 - 200 mm Tool circle diameter 55 mm below table level: 93 - 180 mm Tool circle diameter for straight knife cutterheads max.: 163 mm Max. tool diameter behind fence line: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter 40 mm below table level: 93 - 200 mm Tool circle diameter 55 mm below table level: 93 - 180 mm Tool circle diameter for straight knife cutterheads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Radial spindle CNC-controlled 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 93 - 200 mm Tool circle diameter for straight knife cutterheads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Radial spindle CNC-controlled Divided pressure shoe in front of the top tool holder, adjustable to tool circle diameter and can be swung clear of the tool, spring-loaded. Pressure shoe before and outfeed after top spindle with electronic digital readouts, integrated in the memory function or PowerCom 5th spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 93 - 200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller before 1st lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment range of feed rollers relative to left tool holder, axial 35 mm Machine electrics ----- Operating voltage: 400 V (voltage range 380 - 420 Volts), 50 Hz. All spindles IE 2 version Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN60204, IEC-204-1. Other electrical standards are not taken into account. Mach...

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SAPI Jumbo, slėgis: 12 juosta, bendras plotis: 3 087 mm, bendras aukštis: 2 078 mm, bendras ilgis: 3 692 mm, bendras svoris: 3 000 kg, vidinis plotis: 2 340 mm, vidinis ilgis: 3 520 mm, vidinis aukštis: 2 500 mm, ruošinio svoris (maks.): 500 kg, filtravimo plotas: 20 m², Įranga: apšvietimas, This operational, assembled, walk-in JUMBO blast cabin offers a comprehensive solution for efficient blasting operations. Equipped with 2 LED chamber lights, it provides optimal illumination of the work area. The double-winged door allows easy access and handling of larger workpieces, while the blast protection rubber on the walls protects the interior from wear and extends the lifespan of the cabin. Caedeukdfpopfx Admea For air filtration and dust reduction, the cabin is fitted with a high-performance cartridge filter and an impact separator, ensuring a clean working environment. The flat conveyor system in the floor with grating cover ensures automatic return transport of abrasive media, and the electric drive unit for the conveyor system guarantees smooth operation. Additionally, the cabin features a bucket elevator and a high-performance abrasive recycling unit to process and reuse blasting media efficiently. The pressure blast vessel with a 38-liter capacity offers ample volume for extended work cycles. A 10-meter blasting hose and a long-life boron carbide nozzle are also included, ensuring optimal blasting results. This blast cabin is ideal for companies looking for a reliable and efficient solution for blasting operations. *Special equipment, such as loading trolleys, is also available on request.* Compressed air and power supply, as well as installations, are to be provided on site. If we have sparked your interest, please feel free to contact us at any time!

Sąlyga: naudotas, rida: 29 232 km, galia: 110 kW (149,56 AG), kuro tipas: dyzelinas, pavaros tipas: mechaninis, bendras svoris: 7 490 kg, pirmoji registracija: 10/2000, emisijos klasė: euro2, spalva: žalia, sėdimų vietų skaičius: 3, Gamybos metai: 2000, Įranga: visų varančiųjų ratų pavara,