Tec-Point Gmbh Lmh-2000 pirkti naudotą (76 392)

Būklė: naujas, Gamybos metai: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right or left bending. The plug-in bending tools enable rapid changeover to different tube sizes. Fast hydraulics to reduce non-productive time is an important factor for series production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick as required) with data storage and the latest X2X interface can store an almost unlimited number of programs for bend angles, length measurements, and rotation angles for up to 50 bending sequences on one tube length. To monitor springback values, there is a freely programmable database for up to 200 materials. Hodjng Exaopfx Af Uol The machine has 2 operating modes: In "Simple Bending", the length and rotation of the arcs relative to each other are automatically displayed. In "Controlled Bending" mode, the data is entered beforehand, and during bending a continuous actual/target comparison occurs. This ensures mispositions within a tolerance window are eliminated, minimizing user-related error rates. General error messages are displayed in full text on the large screen. Mandrel retraction is programmable and can be automatically withdrawn early once the bend angle is reached. The compact drive unit with detachable mandrel holder offers advantages for use on-site as well as for special applications with very large tube feed and is also available as a stationary version with an organization system for tools and mandrel rods. The affordable alternative to fully controlled CNC machines. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering, e.g., chemical industry • Metalworking • Prototype construction • Technical Data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control, bend angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions available longer) • Maximum 180º bending result • Weight 800–900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-release chuck • Positioning of length and rotation via automatic brake function or manual stops with foot switch • Automatic positioning of length and rotation via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping force • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Welcome to test production in our demo room • Consultation and information session at your site • Consulting and handling of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, maintenance at your location

Būklė: naujas, Gamybos metai: 2025, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries for both right-hand and left-hand bending. The interchangeable bending tools enable rapid changeovers to different tube sizes. Fast hydraulics to minimize non-productive times is a key factor for series production. Clamping pressure for tube securing is optimally adjustable. The PLC control (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and twist angles for up to 50 bending sequences on a single tube. A freely programmable database for up to 200 materials is available for monitoring springback values. Hedpfx Afsndn Ago Ujl The machine offers two operating modes: In “Simple Bending,” the length and rotation of bends relative to each other are displayed automatically. In “Controlled Bending” mode, the data are input in advance, and a continuous target/actual comparison is made during bending. This excludes incorrect positioning within a specified tolerance window and thus minimizes user-related errors. General error messages are displayed in plain text on the large screen. The mandrel retraction is programmable and can be automatically retracted prematurely upon reaching the bending angle. The compact drive unit with removable mandrel support is advantageous for on-site assembly as well as for special designs requiring very long tube advance, and is also available as a stationary variant with an organized system for tools and mandrel bars. The cost-effective alternative to fully controlled CNC machines. POSSIBLE APPLICATIONS: • Hydraulic tubing • Pipeline construction • Plant construction, e.g. chemical industry • Metal fabrication • Prototype construction • Technical Data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control, bending angle adjustment (0.1°) • Mandrel support lengths 1500/3000/4500/6000 mm (special versions available longer) • Maximum bending result 180º • Weight 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops by foot switch • Semi-automatic positioning of length and rotation via servo motors • Pneumatic rotary stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping • 10-inch touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Test production welcome in our in-house demo room • Consultation and information at your premises • Consulting and processing for leasing/financed purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Būklė: naujas, Gamybos metai: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal addition for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The unit can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is securely clamped onto the rotary table using the clamping device and is bent around the bending tool. With this system, leg lengths to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy in bending operations. TECHNICAL DATA: • Bending capacity steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edged tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° optional OUR SERVICE: Hjdpfx Aenh R Ekjf Uol • Test production welcome at our facility in the demo room • Consulting and information meeting at your location • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance available at your location

Būklė: naujas, Gamybos metai: 2025, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both stationary and directly at the assembly site, up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide robust drive force. The motor speed is automatically adjusted, resulting in rapid return motion and shorter cycle times. Position detection directly on the bending axis ensures optimal bending accuracy and extremely high repeatability. The bending angle can be set to 0.5° simply and quickly via push buttons. A large LCD display shows the angles clearly. The ability to store up to three bending angles allows efficient bending of tubes with different bending results. For transport, the compact unit with accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube and rotating tool” principle ensures a minimal footprint during bending. Sliding shoes are used for thin-walled tubes to ensure wrinkle-free bends and to achieve arcs with minimal deformation, for example, in stainless steel and copper tubes. Hodonfvx Nspfx Af Uel Using the PB20 profile bending attachment, flat, square, and round bar stock can be bent with ease. POTENTIAL APPLICATION AREAS: • Hydraulic piping • Prototyping • Plumbing and heating installation • Technical data: • Bending capacity: Ø 6 to 35 mm, CU Ø 42 mm, depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation is possible • 40 mm hex shaft for quick tool changes • Safety foot switch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency converter and three-phase motor • 3 programmable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Mini bending device KBV • Special tools as required OUR SERVICE: • Welcome for test production in our in-house demo room • On-site consultation and information session • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your location

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME APPLICATIONS: This compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm, both stationary and directly at the installation site. Transport is possible using a pallet truck or the optional caster wheels. A robust three-phase motor and a precision gearbox provide powerful drive. The machine stands out for its compact and slim design as well as its highly accessible bending area. Position detection directly on the bending axis ensures optimal accuracy. The bending angle is set simply and quickly via a user-friendly, menu-guided touchscreen interface available in 14 languages, guaranteeing even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each with a sequence of up to 8 bends per geometry. The multifunction control allows variable speed adjustment for forward and return travel, and features a programmable overbending function to compensate for material springback. With the aid of four material characteristic curves, the material is automatically overbent to the required angle, ensuring precise results. The “stationary tube and rotating tool” principle minimizes space requirements during bending. For thin-walled tubes, sliding shoes are employed to achieve crease-free bending and to bend curves with minimal deformation, for example with stainless steel and copper tubes. Hsdpfx Aendk N Ajf Ujl The PB20 profile bending attachment allows for easy bending of flat, square, and round steel. The small-radius bending device (KBV) attachment makes extremely small bending radii possible. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunction machine control with bending angle setting (0.1°) • Maximum bending angle: 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 model series with bending radii starting from 45 mm, includes 40 mm hexagonal shaft • PB20 profile bending attachment – for bending flat and square steel up to max. 100 x 10 mm, round steel up to max. 20 mm • KBV small-radius bending device • Special tools as per specification • Customized software for special applications OUR SERVICE: • Welcome to test production in our in-house demo room • Consultation and information session on your premises • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in for your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine, featuring a manual eccentric quick clamping system for tube fixing, allows for efficient bending operations. The compact drive unit with a detachable mandrel carrier provides advantages for use directly at the installation site. Position feedback directly on the bending axis ensures optimal bending precision. The bending angle is set quickly and easily via a user-friendly touchscreen control with a menu-guided interface. The comfort control enables two selectable speeds, as well as a parameterizable overbending function to compensate for material springback. The bending process is greatly shortened thanks to an automatic 'clear travel' at the end of the bend. For more complex bending tasks, programs can be stored, managing a sequence of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be saved on the control unit or a USB stick. Plug-in bending tools allow for quick changeover to different tube sizes. For demanding geometries, the machine's bending direction can be easily changed to right- or left-hand bending as standard. The open bending unit enables, for example, the fabrication of railing frames with only one welding seam. Optional calculation software for the PC calculates the cut length for the entire geometry and determines the feed path, twist, and bending angle for each bend. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching a certain bending angle. POSSIBLE APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Prototype construction • Pipeline construction TECHNICAL DATA: • Bending capacity Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm/140 mm • Bending radii 2 x D • Multifunctional machine control with bending angle adjustment (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Max. 180º bend result Hodpfjnfvy Uex Af Uel • Weight 300-500 kg (depending on version) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital length and twist measurement (resolution 0.1) • Remote operation of all functions at the carriage (rotation and length stop) • Bending radius up to 250 mm • PC pipe calculation software OUR SERVICE: • Welcome to test production in our in-house demo room • Consulting and information sessions at your site • Consultation and processing for leasing/finance purchases via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Būklė: naujas, Gamybos metai: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII For tube dimensions from 20 - 90 mm, this bending system provides solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD are also feasible for series production. With a tool height of 120 mm, there is ample room for special profiles. The highly precise and powerful electric drive of the bending axis, as well as the robust and rigid design of the mandrel carrier and bending arm, contribute to the desired bending result. The plug-in bending tools allow for quick changeover to other tube dimensions. The clamping pressure for tube fixation can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube length. For monitoring the springback values, a freely programmable database for up to 200 materials is available. The control system offers two operating modes: In 'Simple Bending', the system automatically displays the length and rotation of the bows relative to each other. In 'Controlled Bending' mode, the data is pre-set, and a continuous target/actual comparison is performed during the bending process. Also available with pneumatic stop or with gear-assisted length and rotation positioning. APPLICATION AREAS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metal construction • Prototyping • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm depending on material • Bending radius min/max: 40 mm/250 mm Hodpfx Aenh R Suof Uel • Minimum bending radius: 1.5 x Ø (standard 2 x Ø ) • Multifunction machine control for bending angle adjustment (0.1°) • Mandrel carrier lengths: 3000/4500/6000 mm • Maximum 180º bending angle • Weight: 1600-3200 kg (depending on model) • Ergonomic operation via safety foot switch OPTIONAL EQUIPMENT: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-release chuck • Larger bending radius up to 300 mm • Positioning of length and rotation via automatic brake function or manual stops with foot switch • Semi-automatic positioning of length and rotation via servomotors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WiFi), or USB OUR SERVICE: • Welcome to test production at our facility in the demonstration room • Consultation and information meeting at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, THE PRACTICAL HAND PIPE BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vice. The drive is operated via a screw-in handle. A lockable adjustment ring ensures repeatable bending accuracy. The interchangeable tools can be replaced with minimal effort. The 'stationary pipe and rotating tool' principle allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, allowing bends in stainless steel or copper pipes with minimal deformation. The optional version with a hexagonal drive enables use in a vice as well as the possibility to use the drive power of the bending systems 3000 and 6000. The KBV can simply be mounted onto the bending shaft of the machine. POSSIBLE APPLICATIONS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limiter • Maximum bending result up to 180º OPTIONAL ACCESSORIES: Hsdpfxeng Amke Af Uol • KBV with hexagonal drive for bending on models 3000 or 6000 • Tool case • Length stop OUR SERVICE FOR YOU ON SITE: • Welcome to test production at our in-house demo room • Consulting and information meetings at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, THE PRECISE 3-ROLL BENDING MACHINE When developing this compact, mobile horizontal bending machine, the focus was clearly on producing dimensionally accurate spirals, such as handrails for spiral staircases. This is considered the supreme discipline, as two interdependent variables (radius and pitch) must be combined into a precise geometry in a single bending operation. The interplay of tube calculations on the PC, their implementation on the bending machine, and monitoring via measuring devices with final adjustment of bending values ensure accurate, precise bending. With just a few easy inputs into the PC tube calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power supply. Hardened steel tools and surface-friendly hard plastic tools are available. To ensure optimal feed even for tight bending radii, all three bending shafts are driven. The drive concept proves itself in demanding daily work, whether working on flat stock, bending tubes or profiles. Customers of the Bending System 4800, 5000, and 6000 can purchase the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this case, the machines function as the drive unit. POSSIBLE APPLICATIONS: • Handrails/Intermediate rails for spiral staircases • Large tube and profile bends • General metalworking TECHNICAL DATA: • Bending capacity Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left Hedsng A R Sepfx Af Uel • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Construction-site suitable 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – for controlled pitch formation • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist • MPW – PC-based calculation program for determining correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm high • Tools for special profiles OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and informational meeting at your premises • Leasing/financing purchase options • Service contracts and on-site maintenance

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ON-SITE ASSEMBLY This compact and mobile bending machine enables precise and repeatable bending up to an outside diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox provide robust drive power. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is set quickly and easily via a user-friendly, menu-guided touchscreen interface, which guarantees even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each with angle sequences of up to 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and return motions, and a parametrizable overbend function compensates for material spring-back. Thanks to four selectable material curves, the material is automatically overbent to the required angle, ensuring a precise bending result. Hjdpfjng Ax Sox Af Ujl The “stationary pipe, rotating tool” principle ensures a minimal footprint during bending operations. For thin-walled tubes, sliding shoes are used to achieve wrinkle-free bends and to bend arcs with minimal deformation in materials such as stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent effortlessly. The KBV small-radius bending attachment enables extremely tight bending radii. POSSIBLE APPLICATION AREAS: • Plant engineering • Hydraulic piping • Serpentine/Meander bending • Prototype construction • Plumbing and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Bending radius min/max: 36 mm / 280 mm • Optional large bending radii up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1° increments) • Maximum bending angle: 240° • 40 mm hex shaft for quick tool changes • Safety foot switch with emergency stop • Weight: 110 kg OPTIONAL ACCESSORIES: • Profile bender PB20 – for bending flat and square bar up to max. 100 x 10 mm, round bar up to max. 20 mm • Roll bender RB43 – the RB43 mounts to the hex shaft on the bending axis. Switching to continuous bending mode transforms the system into a drive unit. • Small-radius bending attachment KBV • Special tooling according to specifications OUR ON-SITE SERVICE FOR YOU: • Welcome to test production at our facility in the demo room • Consultation and information meeting at your premises • Consulting and financing/leasing arrangements • Trade-in of your current machine • Service contracts, maintenance at your location

Gamybos metai: 2012, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9332067, RIEDANTIS TRANSPORTERIS - KONSTRUKCINĖ SMĖLIAVIMO ĮRANGA GAMINTOJAS: RUMP TIPAS: 20-W 1500-4 Gamintojas: Rump Tipas: 20W-1500-4 Pagaminimo metai: 2012 Išmatavimus ir darbo valandas rasite techniniame brėžinyje. Komplekte yra filtravimo sistema, garso izoliacija, elektros skydinė, pilna dokumentacija ir kt. PUIKIOS BŪKLĖS Tai veikiantis, naudotas įrenginys. Parduodama be garantijos ir be jokių įsipareigojimų. Hedpfxey Entie Af Uel Pasiliekama teisė į tarpinius pardavimus ir galimas klaidas.

Būklė: naujas, Eurotec Innovation TV25-M – Mobile Vibratory Finishing Unit / Trough Vibrator (Made in Germany) The TV25-M from Eurotec Innovation is a compact, mobile turnkey solution for professional vibratory finishing – ideal for deburring, grinding, and polishing all types of workpieces. Thanks to the clever system design, all necessary components are space-efficiently integrated on a mobile trolley. This makes the unit highly flexible and ready for immediate use. Type: TV25-M TROUGH VIBRATOR Manufacturer: Eurotec Innovation GmbH Gross volume: 50 litres Advantages: - Mobile complete system – all components integrated on a transport trolley - Plug & Play – simply connect to 230V and start - Integrated process water treatment (cascade system) - Sieve box for automatic separation of workpieces and media - Sound-insulated construction for quiet operation - Programmable control with timer and frequency regulation The U-shaped trough design also makes it possible to process larger and elongated workpieces while maintaining a compact footprint. ⚙️ Technical Data: Gross volume: approx. 50 litres Working volume: approx. 36 litres Inner dimensions of processing tank: Length: 600 mm Width: approx. 275 mm Height: 325 mm Connection: 230V Power: approx. 0.5–1.0 kW Application areas: - Deburring of metal and plastic parts - Polishing and surface finishing - Processing of single parts and small batches - Ideal for industry, workshops, and contract manufacturers Ideal for: - Metalworking - Deburring & Polishing - Workshops & Production The TV25-M is the perfect solution for companies looking for a flexible, space-saving, and immediately ready-to-use vibratory finishing system – maximum efficiency with minimal space requirements. Other variants and customized versions available on request. From development to manufacturing, we supply all products from a single source – everything "Made in Germany." ----- Hjdohmp Dqopfx Af Uel Please feel free to contact us – we’ll be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves solely as an online presentation of our products. Contract negotiations are conducted using telecommunication (email, fax, telephone, or message portal), whereby we will first send you a non-binding offer informing you of our general terms and conditions and including information on the right of withdrawal and our legal notice before any purchase or conclusion of contract takes place.

Būklė: paruoštas naudoti (naudotas), Siūloma pilnai sukomplektuota dvigubo maišymo įranga, 2 x 3000 l talpos, pagaminta iš aukštos kokybės V2A nerūdijančio plieno, įskaitant propelerinį maišytuvą iš V2A, su bepakopiu apsukų reguliavimu. Apžiūra galima susitarus iš anksto. Hedpfxjy A Sk To Af Uol

Gamybos metai: 2022, būklė: paruoštas naudoti (naudotas), Parduodama pilna išpilstymo linija su 12 pozicijų gravitinio ir slėginio užpildymo užpildu, turinčiu integruotą Twist-Off dangtelių užsukimo įrenginį, skirtą maisto pramonei. Užpildymo vietų: 12, konstrukcija: rotacinė karuselė, skysčio klampumas: žema–vidutinė, našumas: apie 2000 butelių/val., užsukimo našumas: apie 1000–1200/vnt. per valandą, talpa: termiškai izoliuota, talpos tūriai: 35 l/50 l. Tai pilna užpildymo linija su konvejeriais, surinkimo stalu, jutikliais, besisukančiais stalais, siurbliais ir formato dalimis. Įranga buvo išjungta 2024 m. Yra dokumentacija. Galima apžiūra vietoje. Hjdpfjy Ax Ufox Af Usl

Būklė: naudotas, Gamybos metai: 1994, Mechaninis rūšiavimo ir transportavimo blokas Hjdswtnl Ujpfx Af Ujl

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, aušinimo tipas: oras, lazerio bangos ilgis: 1 064 nm, The LAS 28 XLe universal laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after initial setup. Furthermore, the software is capable of reading data (such as drawing numbers, project names, etc.) from existing tables and automatically transferring them into predefined fields. The use of a handheld scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available upon request. Made in Germany Fiber laser: 30 Watt, 20 Watt or 50 Watt • Laser class 1 • Wavelength: 1064nm • Marking field size: 150x150 mm (optionally larger) • Signal lamp for operational status indication • Optional: rotary axis (3-jaw chuck) • Optional: fume extraction (including activated carbon filter) • Optional: digital height measurement system • Optional: autofocus system for automatic determination of focal distance • Marking software EZCAD in German / English (other software upon request) • Pilot laser (easy preview, plain text preview) • Focus finder (easy focus adjustment) • Max. workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touch screen and keyboard tray, height adjustable • Aluminum profile frame • Air cooled • Door width: approx. 700 mm / Door height (pass-through): approx. 400 mm • Connection: 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH); Hjdpfswlc Stjx Af Uel with monitor arm approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, įėjimo dažnis: 50 Hz, lazerio galia: 20 W, lazerio bangos ilgis: 1 064 nm, nuskaitymo srities ilgis: 110 mm, nuskaitymo srities plotis: 110 mm, įvesties srovės tipas: Oro kondicionierius, lazeri tipas: šviesolaidinis lazeris, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts or, for example, nameplates. Due to its compact design, the system is very practical and can be used almost anywhere. The device is very easy to operate without any programming knowledge. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior configuration. Furthermore, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 20-watt fiber laser (Optional: 30-watt) - Laser class 1 - Wavelength 1064nm Hsdpfow Et Ilox Af Uol - Marking field size 110 x 110mm - Marking software EZCAD in German / English - Pilot laser (for simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190mm - Electrically adjustable Z-axis - Electric door with pinch protection - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For durable markings, the use of lasers has become indispensable in many industries. The powerful laser software allows text, numbers, 2D codes, QR codes, and logos to be created easily and with just a few clicks, without advanced programming skills. Serial and article numbers can be incremented automatically after configuration. Additionally, the software can read data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. Use of a handheld scanner is also supported. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as side extensions for long parts, movable Z-axis, drawer systems, etc., are also available. Furthermore, programmable, software-controlled axes (X, Y, Z axes) and database connectivity are possible. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optional) • Marking software: EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic determination of focal distance • Optional: programmable X, Y, and Z axis (software controlled) • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Signal light for operating status indication • Max. workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray Hsdpfewkpvvsx Af Usl • Frame made from aluminum profile • Air-cooled • Door width: approx. 700 mm / door pass-through height: 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, The universally deployable laser marking system LAS 28 by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 Watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without advanced programming knowledge. The software can automatically sequence serial and part numbers after prior configuration. Additionally, it can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with mounting bracket and Windows operating system. Optionally, the LAS 28 laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options such as side outriggers for marking long parts are available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – for automatic determination of focal distance • Signal tower to indicate operating status • Marking software EZCAD (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Maximum component height approx. 270mm Hodpfx Aev Sybyjf Usl • Electrically adjustable Z-axis (working plane adjustment) • Aluminum profile frame • 230V connection • Air cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660mm (L x W x H) • Weight: approx. 80 kg

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 560 kg, bendras ilgis: 1 870 mm, bendras plotis: 1 040 mm, bendras aukštis: 1 550 mm, suslėgto oro jungtis: 6 juosta, pozicionavimo tikslumas: 0,01 mm, kartojimo tikslumas: 0,01 mm, sukimosi greitis (maks.): 60 000 aps./min, įvesties srovės tipas: trifazis, Semi-automatic Depaneling / Base machine with Parallel Shuttle The dynamic depaneling machine LOW 4322 is specifically designed for medium to high product volumes, meeting increasing demands in the production process. PCB panels of a wide range of materials are separated with high product flexibility, precision, and throughput using low-dust, low-stress sawing and milling techniques. High-dynamic linear motor axes, tools, and grippers meet the highest quality standards, guaranteeing the depaneling system exceptional durability and reliability. Made in Germany Semi-Automatic Depaneling – Tailored Solutions The LOW 4322 depaneling machine allows rapid product changeover while maintaining short depaneling and handling times. PCB panel loading is achieved with a parallel shuttle; clamping and fixation are implemented with pin clamping technology and, when required, combined with vacuum suction cups. This machine is equipped with: • A shaft and disc tool separation module on the Z-axis (automatically rotatable 0-90°) • X-Y cross-feed module featuring linear motor technology with high-resolution measuring system • Dual loading module designed as a parallel shuttle, separated left and right with sliding doors Hjdsxt Dmxepfx Af Usl • Aluminum profile frame with two maintenance doors – left and right • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Work area of 420 x 330 mm • Automatic milling cutter length management (only in conjunction with shaft separation module) • Remote maintenance/support via remote connection (TeamViewer) or customer-provided access • Touch IPC with Windows operating system • Laser axis measurement including protocol • Air ionization • Milling cutter breakage control for shaft cutters only • Prepared for vacuum clamping technology • ESD protection window and sliding doors An optional dust extraction unit can be retrofitted. The high performance of the depaneling system, with its standard saw or milling module, fully automatic cutter length management, vision-assisted teach-in camera system, and two individually loaded PCB fixtures, can be expanded with numerous customer-specific adaptations and equipment options (e.g., camera vision system). Precision laser axis calibration prior to commissioning is part of the personalized customer service for all inline and stand-alone depaneling systems from Systemtechnik Hölzer.

Būklė: naudotas, Gamybos metai: 2004, veikimo valandos: 7 800 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: DRI 04320080, rida: 100 km, bendras svoris: 7 000 kg, kuro tipas: dyzelinas, spalva: mėlyna, darbinė masė: 14 000 kg, didžiausias leistinas svoris: 15 000 kg, grandinės būklė: 50 procentas, Strypo skersmuo (maks.): 61 mm, Vamzdžio skersmuo (maks.): 400 mm, Įranga: guminės vikšrinės juostos, hidraulinis kūjis, kabina, German horizontal drilling rig for boreholes up to 200 meters in length, with a thrust/push force of 15 tons plus impact (28 tons) by hydraulic hammer. Rubber tracks, travel speed up to 3 km/h. Suitable for laying underground pipes up to Ø 400 mm. Maximum drilling depth: 5 meters with wireless navigation system. Manufacturer: TRACTO-TECHNIK GmbH & Co, year 2004. 7,800 operating hours. Components and units: - Hydraulic-driven carriage, HATZ diesel engine, 4-cylinder, operator cabin - 3 drill rod boxes (each with 48 rods x 3 m) = 144 rods (432 meters total) Operating options: 1. Rod handling manipulator 2. Semi-automatic rod clamp and pullback Mixing plant (8056D) with hydraulic station (TT-M2) DRI 8904.B, DEUTZ 4-cylinder diesel engine, bentonite pump P-72, two preparation tanks for bentonite (each 4,000 liters), two BÖRGER rotary pumps for mixing Connection cable for mixing plant Bentonite hose reel Drilling heads: 2 pcs. Hsdpfx Aoy H H Uusf Uel Reamer Ø110, Swivel 5 t Reamers: Ø280 with swivel, Ø315 with swivel, Ø385 with swivel Navigation system: Eclipse New spare working units (adapter, shaft, bushing) Price incl. VAT.

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bendras plotis: 600 mm, bendras ilgis: 1 200 mm, bendras aukštis: 2 300 mm, bendras svoris: 150 kg, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, darbo diapazonas: 400 mm, produkto aukštis (maks.): 30 mm, garantijos trukmė: 12 mėnesiai, valdiklio modelis: SPS-Steuerung Siemens Simatic HMI, įėjimo dažnis: 50 Hz, suslėgto oro jungtis: 6 juosta, apkrova vienai atramai: 50 kg, pozicionavimo tikslumas: 1 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, apšvietimas, dokumentacija / vadovas, Feeding and storage system for light articles in goods carriers. Tray feeding for magazine loading in automated production. Specifically designed for components sensitive to surfaces or contours. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30 mm • Fast tray changeover time (4–8 seconds) • Tray weight including workpieces max. 5 kg • Tray stacker weight max. 50 kg • Positioning accuracy ± 1 mm • PLC control with operator and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication preparation – Siemens IWLAN client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door lock • Small footprint due to compact design • Flexible adaptation to various machines via different interfaces • Low investment costs Hsdpoyycqxjfx Af Ujl • Fully equipped • Robust design (solid steel construction, powder-coated) • No machine adapters required • Power supply 400 V / 50 Hz / 3ph • Minimum compressed air connection 6 bar • Dimensions: 1200 x 600 x 2300 mm (LWH)

Gamybos metai: 2018, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, Siūlome šią demonstracinę mašiną SM Innotech Laminator Incapcell 35-18, pagaminta 2018 m. Gamintojas: SM Innotech GmbH & Co.KG Modelis: Incapcell 35-18 Pagaminimo metai: 2018 Būklė: demonstracinė mašina Kategorijos ID: 33 Hodpfx Afjy Druus Ujl Mašinos tipas: laminatorius Yra 2 šios įrangos vienetai, abu yra nauji, nes niekada nebuvo naudojami. Jei turite klausimų arba reikia daugiau informacijos, parašykite mums žinutę arba paskambinkite.

Gamybos metai: 2019, būklė: naudotas, Siūlome naudotą SM Innotech GmbH & Co.KG Incapcell 22-18 laminavimo įrenginį, pagamintą 2019 metais. Įrenginys turi labai mažai darbo valandų, nes buvo naudojamas tik kaip bandomoji mašina testavimo tikslams. Individualūs programinės įrangos atnaujinimai arba kiti pakeitimai galimi pagal susitarimą. Įrenginys gali būti pristatytas iš karto. Hsdpfx Aey Dq D Isf Usl Jei turite klausimų arba reikia daugiau informacijos, prašome parašyti mums žinutę arba paskambinti.

Gamybos metai: 2024, būklė: paruoštas naudoti (naudotas), The heat exchangers are part of the system and were only commissioned separately. The new price of the plant was thus over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial operation and not continuous production. Technical Data – Modular Chamber Furnace System for the Homogenization of Aluminum Billets (Used System) Machine Type: Modular chamber furnace system with heat recovery Intended Use: Homogenizing (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, loading machine, racks System Configuration Hsdpfxsyt Ihbs Af Ujl The system essentially consists of: • 1 Preheating furnace (BSN 1607) – electrically heated, jet heating • 2 Holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 Heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 Loading machine (BSN 1612) – electric/hydraulic • 12 Charging racks (BSN 1614) • Switchgear with PLC control (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is constructed as a complete machine according to the Machinery Directive 2006/42/EC (CE compliant). Further information can be found in the attached PDF.