LAS 28 20 W - Lazeris žymėjimui

20 Watt Laser Systemtechnik Hölzer GmbH Beschriftungslaser LAS 28 20 Watt

Gamybos metai: 2022, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, We are offering for sale an Instron tensile and compression testing machine in excellent condition. Instron 34TM-50 tabletop model with 3 load cells and a wide range of accessories (see photos) Configuration: E1-F1-G1 50kN Year of manufacture: 2022 Weight: 151 kg Load cell: 50kN 2530-50kN/165541 Load cell: 5kN 2530-5kN/166885 Load cell: 500N 2530-500N/164475 Software on USB stick: Bluehill Universal Version 4.29.29784 Software also installed on PC Last service and calibration: August 2024 Next service and calibration: August 2026 The 3400 Series universal testing machines cover a test force range from 500 N to 300 kN. Featuring Instron's patented operator protection architecture, the 3400 Series testing machines are easier to use, smarter, and safer than ever before. The testing systems are ideal for performing tensile, compression, bending, peel, puncture, friction, shear, and many other tests, and can be used with a wide variety of grips and fixtures from our extensive accessory catalogue. Overall height: 1604 mm Iodpfxswz Ikto Abksik Maximum vertical test space (test daylight - base to underside of crosshead): 1198 mm Test types: Tensile, compression, and through zero operation Basic control mode: Displacement control Capacity – kN (lbf): 50 (11240) Maximum speed – mm/min (in/min): 508 (20) Minimum speed – mm/min (in/min): 0.05 (0.002) Max. force at max. speed – kN (lbf): 25 (5620) Maximum speed at maximum force – mm/min (in/min): 254 (10) Return speed – mm/min (in/min): 508 (20) Crosshead speed accuracy: ± 0.2% of set speed at constant rate, no load Position (crosshead) display accuracy: No load, ±0.02 mm (0.0008 in) or ± 0.10% of indicated value, whichever is greater Position (crosshead) repeatability – mm (in): ± 0.015 (0.0006) Load measurement accuracy: ± 0.5% of reading down to 1/200 of the load cell's rated capacity Strain measurement accuracy: ± 0.5% of indication down to 2% of full scale with extensometer meeting ASTM E83 Class B or ISO 9513 Class 0.5 Financing or leasing options for the offered item are available upon request!

Gamybos metai: 2001, Sąlyga: naudotas, Max. pressure: 500 t, max. operating temperature: 370°C, oil-heated, oil-cooled, with secondary circuit for heat recovery, overhauled in 2014. Isdpsdwf Dbsfx Abkjik

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: WK-4A-0007-24, matavimo diapazonas X ašis: 1 000 mm, matavimo diapazonas Y ašis: 900 mm, matavimo diapazonas Z ašis: 600 mm,

Gamybos metai: 2024, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, The universally applicable laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, without extensive programming knowledge. The software can automatically increment serial and article numbers after initial setup. Additionally, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a hand scanner is also possible. The standard equipment includes a laptop with holder, Windows operating system, and laser software. Optionally, the LAS 28 XL laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, a movable Z-axis, drawer systems, etc., are available. Made in Germany Fiber Laser: 30W, 20W or 50 Watt • Laser class 1 • Wavelength 1064nm Iijdpjqfcvisfx Abksk • Marking field size 150x150mm (larger optional) • Marking software EZCAD in German / English • Signal light for operating status display • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction unit (incl. activated carbon filter) • Optional: extension arms for large components (single-sided, double-sided) • Optional: autofocus system • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. component height approx. 300mm • Electrically adjustable Z-axis • Laptop incl. holder with Windows operating system • Frame made from aluminum profiles • Air-cooled • Door width approx. 700mm / Door height (pass-through): approx. 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 100 kg

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, stalčių skaičius: 30, EXTENDABLE RACK FOR GLASS PANEL STORAGE M80-30 YEAR OF MANUFACTURE 2025 / BRAND NEW We are a manufacturer of extendable racks for the storage of glass panels (crates with glass) and other sheet materials (sheet metal, sintered quartz, polycarbonate, furniture panels). Our racks are designed and manufactured entirely in-house at our facility in Poland. Iijdpsha E S Tofx Abkjk The materials used for the production of our racks come with relevant durability certificates and are subject to continuous quality control. The rack consists of extendable, slightly inclined drawers. This racking system allows for up to 75% savings in storage space, as all compartments are built parallel to each other and spaced just 10 millimeters apart. We offer rack versions in various dimensions and load capacities. Following consultation, we can also manufacture racks with custom specifications to meet your individual requirements. The drawer inclination depends on installation and can be set to the left or right. We particularly recommend these racks for glass factories, stonemasons, furniture manufacturers, and advertising workshops seeking efficient use of space. The racks are delivered as a kit for self-assembly. Assembly is straightforward; with our many years of experience, we have developed a well-designed product. With the included assembly instructions, putting the unit together is hassle-free. Our technical support team is always available to assist as needed. Should you prefer a technician to handle assembly, this can be arranged for a fee. TECHNICAL SPECIFICATIONS – RACK MODEL M80-30 Application: for individual glass panels up to 255 cm x 160 cm Maximum glass panel size: 275 cm x 170 cm Number of compartments: 30 Width of glass support rail: 8 cm Length of glass support rail: 308 cm Material supporting the glass panels: wooden board 308 cm x 8 cm x 2.5 cm Overall height (A): 218 cm Overall width (B): 436 cm Overall depth (C): 317 cm Required floor space for correct operation: 27 m² Floor requirements: flat/level Number of bearings per compartment: 8 pcs Front wheel: Ø160 / reinforced polyamide Rear wheel: ball bearing steel wheel / rolled on profile Colour: RAL 7040 (grey) Corrosion protection: steel parts phosphated and powder-coated Permissible load per compartment: 900 kg Maximum total load: 27,000 kg Drawer inclination: left or right, depending on installation Assembly time: 14 hours Number of persons required for assembly: 2 DOCUMENTS SUPPLIED WITH RACK M80-30 - User manual - Assembly instructions - Data plate - Warranty: 12 months The product is delivered ready for immediate use. Our company supplies glass storage racks throughout the EU and to other countries as well.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras plotis: 950 mm, bendras ilgis: 600 mm, bendras aukštis: 1 850 mm, oro poreikis: 0,9 m³/val, bakelio talpa: 250 l, įėjimo įtampa: 230 V, bendras svoris: 180 kg, Įranga: apšvietimas, kabina, XTON SANDBLASTER™ is a premium sand blasting and glass bead blasting unit, ideal for workshops with limited workspace. The 250-liter pressure blast cabinet operates in a closed-loop system and features a unique filtration system with integrated dust separator. Its design ensures exceptionally quiet operation, providing increased user comfort. The unit is equipped with high-quality grain leather gloves, offering excellent resistance to mechanical damage. Additionally, the machine can be painted in any color from the RAL palette. An option for stainless steel construction is also available. EQUIPMENT: - Work table measuring 80 x 55 x 60 cm - 250-liter chamber - LED lighting - High-quality gloves TECHNICAL SPECIFICATION: - Weight: 180 kg - External dimensions (W x D x H): 95 x 60 x 185 cm - Chamber dimensions (W x D x H): 88 x 55 x 60 cm - Chamber capacity: 250 L - Mains voltage: 230 V / 50 Hz - Rated working pressure: up to 10 bar - Cleaning capacity: 25 m³/h - Cleaning class: SA-3.0 – thorough and deep corrosion removal - Air consumption: 900 L/min - Maximum airflow: up to 12,500 L/min - Supported nozzle diameters: 2–15 mm - Nozzle material: Tungsten carbide - Abrasive medium valve: MIKRO II - Viewing window size: 270 x 510 mm - Work table load capacity: up to 200 kg Iedpfx Asrl R Dljbksik - Operating temperature: 10 – 50 °C - Design: powder-coated steel, optional stainless steel

Sąlyga: naujas, Gamybos metai: 2023, Oscillating sanders are designed for sanding straight, curved, and shaped pieces with round or oval cross-sections, etc., and with variable thicknesses, suitable for chairs, tables, beds, and related items. The main features of the machine are: frame made of electro-welded steel; rotating disc with two counter-rotating sanding belts driven by an electric motor, with rotational movement around the workpiece; electric control panel; two adjustable workbenches (infeed – outfeed); possibility of fitting two automatic workpiece feed units with adjustable speed via inverter. Sanding belts: 80 x 1260 mm Minimum / Maximum workpiece diameter: 10–100 mm (ø) Minimum bending radius: 200 mm Dimensions: 760 x 1000 x 1800 mm 3 units Iisdjqnufvspfx Abkok Camam, Comec, OMEF, Brusa di Garboli

Gamybos metai: 2023, Sąlyga: beveik kaip naujas (parodų įrenginys), Downstroke press Pressing force: 300 kN Press area: 300 x 300 mm Iodpfxokuz T Uo Abkoik Specific pressure: 3.3 N/mm² Opening: 200 mm Heated platen as solid steel hot plate Electrically heated up to 250°C Control system: Siemens S7-1200 with 12" touch panel Mechanical safety door Data logging

Sąlyga: geras (naudotas), Gamybos metai: 2006, X ašies eiga: 630 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 560 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 30 m/min, X ašies padavimo greitis: 30 m/min, Y ašies padavimo greitis: 30 m/min, padavimo greitis Z ašis: 30 m/min, stalo plotis: 1 000 mm, stalo ilgis: 600 mm, stalo apkrova: 500 kg, bendras svoris: 6 500 kg, veleno greitis (maks.): 12 000 aps./min, įrankių magazino lizdų skaičius: 24, Įranga: drožlių transporteris, Priedai: apie 40 vnt. SK-40 įrankių laikiklių (be pjovimo įrankių) Darbo valandos: 32 379 val. (būklė 2024-07-09) Veleno darbo laikas: 15 674 val. (būklė 2024-07-09) Ant stalo pritvirtinti objektai nėra įtraukti į pristatymą! Iiedpfx Abexcpkzekjk Įrenginys prieinamas iš karto.

Sąlyga: naujas, Gamybos metai: 2025, Are you looking for quality and expertise for your sheet metal processing machine? Then we are the right partner by your side. If you know us, you already know we are a reliable company :) PRESS BRAKE 2.64 m / 1.2 mm Brand new machine. Warranty: 12 months. We deliver the machine with our own truck. CE certificate Eccentric force transmission to both sides of the machine Working length: 2640 mm Mild steel: 1.2 mm Up to 30% higher bending capacity for non-ferrous metals Bending beam: 24 mm Bending angle: 145 degrees Weight: 350 kg Cutting along the entire working length Upper beam can be lifted in three positions Maximum clear opening between the beams: 80 mm Rear support stand for holding sheets, angle stop, degree scale, gas pressure damper Front cut-off stop for ensuring the preset cutting width Payment method: Cash on delivery Price: 2,400 euros Delivery costs: 240 euros Delivery time: weekly Rolling shear 0.8 mm available for an additional 350 euros Iodpfx Ajdad Adobkoik We look forward to hearing from you! Invoices are issued at 0% VAT as intra-community supply or plus 19% VAT, as applicable.