Reguliuojamas slėgio sprogdinimo salono aukštis

Oliver Fritz Gmbh & Co. KG DSK 11.11.30

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 9 000 h, Funkcionalumas: visiškai funkcionalus, TECHNICAL DETAILS Control: Mitsubishi Meldas 700 Main Spindle Gsdoxf Hqqjpfx Afdsbn Machining diameter: 20 mm Machining length without re-clamping: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools on Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tool System Turning tools (12x12x130): 5 Tool holder/Parting-off tool (16x12x130): 1 Drilling tools (front side): min. 3 Drilling tools (rear side): 5 Tool holders, quills (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Main/Sub spindle collet: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specification Space requirement (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Input power: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section) - 3 driven tools for cross machining - 3 driven tools for face machining on main spindle - 3 driven tools for face machining on sub spindle - Main spindle with C-axis - Sub spindle with C-axis - 3x rear side machining units (AGW) - Yellow warning light - Interior workspace light - Workpiece conveyor belt - FMB Turbo 3-26 bar loader - Option for long components - Spindle flushing system (Scherzinger pump)

Būklė: naujas, Gamybos metai: 2026, The KDP220TOP sandblaster is a top-quality product, delivering prolonged and reliable operation for users. It enables rapid and efficient cleaning of various types of components. The unit features a top-loading lid supported by telescopic struts, significantly enhancing ergonomics and facilitating the loading of heavy parts. Its 220-liter capacity allows for effective cleaning of large surfaces in a short time. Advantages of our sandblaster model: - Ready for immediate use - Ergonomic sandblasting gun with four interchangeable ceramic nozzles - Large, stable front door with a rubber peripheral seal for safe and dust-free operation - Telescopic struts for improved operator comfort - High-quality integrated rubber gloves - Vent connection - Powerful work area illumination - Four pieces of replaceable window protective film - Sandblasting hose located at the bottom of the collecting container Gbjdpfx Asvzqf Usfdon - Suitable for use with various abrasives - Drain outlet for quick material changeover - User-friendly, reliable, and safe to operate Technical Specifications KDP220TOP Technical Data: AIR CONSUMPTION: 400–700 L/min MAXIMUM PERMISSIBLE PRESSURE: 8 BAR AIR CONNECTION: 1/4" quick coupler ABRASIVE CONTAINER CAPACITY: +/- 18 kg EXHAUST CONNECTION: 63 mm VIEWING AREA: 540 x 250 mm FRONT HEIGHT: 370 mm INTERNAL CABINET DIMENSIONS (LxWxH min-max): 840 x 550 x 370–550 mm EXTERNAL CABINET DIMENSIONS (LxWxH min-max): 890 x 560 x 1118–1380 mm WEIGHT: 49 kg DC23 Technical Data: MODEL: DC23 VOLTAGE: 220V POWER: 1200W VACUUM: >12 Kpa INLET DIAMETER: 45 mm CAPACITY: approx. 16 l Standard Equipment: - Work area illumination – 12V fluorescent lamp with 230V supply and switch - Two pairs of high-quality integrated rubber work gloves - Two exhaust (vent) connections, 63 mm and 90 mm diameter, for connecting an extraction unit - Sandblasting gun with four interchangeable ceramic nozzles (sizes: 4, 5, 6, 7 mm) - Four pieces of replaceable window protective film - Top lid with peripheral rubber seals for dust-free operation - Sturdy grid on the work area - Polish user manual - DC23 dust extraction unit - 2 m connection hose - Bag filter

Gamybos metai: 2024, būklė: naujas, oris- Extruder MINI ESE 20/25 D Technical Data Screw Diameter [mm]: 20 Screw Length [L/D]: 25 Screw Speed [rpm]: 20-200 rpm Screw Axial Pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency converter Drive Power [kW]: max. 2.5 Reduction Gearbox with integrated thrust bearing Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590 *) Gsdpfx Aehx Elfjfdebn Electrical Connection Values: 3 / N / PE Supply Voltage [V]: 400 at 50 Hz Control Voltage [V]: 230 Temperature Control: Electric mica resistance heating bands Max. Processing Temperature [°C]: 300 Control Cabinet and Control Panel The electrical installation of the extruder is located in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; the water connection must be provided by the customer. A chiller unit for cooling the water is not included in the offer. Extruder tooling is not included in the scope of supply.

Būklė: naujas, - Shaft diameter 50 mm - The upper roller is hydraulically operated - Three driven rolls Gbodegg N Twjpfx Afdjn - Digital display - Can be used horizontally or vertically - Foot switch - Emergency stop - Documentation - 400V

Būklė: naudotas, Gamybos metai: 1970, mašinos/transporto priemonės numeris: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Godpfx Afjfx Hv Hjdjbn Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Passage opening in table: 240 mm Passage opening in clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable design via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or underneath (360 x 160 mm), centralized lubrication via hand pump, additional clamping plate (700 x 480 x 850 mm), two-hand operation, foot release configurable, mode selector switch for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2008, Used swing-beam shears RAS 86.33 with newly ground upper and lower blades, regularly serviced and only lightly used Technical data: Year of manufacture: 2008 Weight: 6,800 kg Maximum sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Back gauge depth: 5–1000 mm Working height: 800 mm Strokes per minute: 30–64 min⁻¹ Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase current Gbjdpfjv Tk Exox Afden Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angular gauge: 2,195 mm Machine depth with angular gauge: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame throat depth: 100 mm Tank capacity: 150 l

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2021, X ašies eiga: 1 270 mm, Y ašies eiga: 660 mm, Z ašies eigos atstumas: 610 mm, valdiklių gamintojas: HURCO, valdiklio modelis: WINMAX, bendras aukštis: 3 240 mm, stalo apkrova: 2 000 kg, bendras svoris: 7 950 kg, veleno greitis (maks.): 12 000 aps./min, įrankio svoris: 7 000 g, ašių skaičius: 3, Šis 3 ašių "Hurco VMX50i" buvo pagamintas 2021 m. Jame yra tvirtas SK40 suklys, galintis pasiekti iki 12 000 apsukų per minutę greitį, ir didelis 1500 x 660 mm stalo paviršius, išlaikantis iki 2000 kg svorį. Dėl 1270/660/610 mm X/Y/Z eigos ir sparčios 32/32/24 m/min slinkties greičio jis idealiai tinka dinamiškoms apdirbimo užduotims. Komplekte yra 30/40 padėčių automatinis įrankių keitiklis. Susisiekite su mumis ir gaukite daugiau informacijos apie šias stakles. • Suklio priekis į stalą: 101-711 mm • Stalo darbinis paviršius (plotis x gylis): 1500 x 660 mm • Stalo T formos lizdai (DIN 650): 6 x 18 x 100 • Automatinio įrankių keitiklio (ATC) padėtys: 30/40 • Mašinos būklė: - Staklių būklė: Įjungta ir veikia • Bendras mašinos darbo valandų skaičius: 6700 Papildoma įranga Gbodpfx Afex D E Acjden • Skaldos transporteris • Dulksnos surinktuvas • Išorinis emulsijos rezervuaras su filtravimu vidiniam įrankių aušinimui • Įskaitant ruošinio ir įrankio zondus • Programavimo plėtiniai dwg-dxf Dimensions Machine Depth 5059 mm

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1989, An aluminium die casting machine is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mould locking: double toggle lever, shot chamber: cold chamber, orientation: horizontal. Shot plunger diameter min./max.: 40 mm/70 mm, shot chamber fill volume min./max.: 293 cm³/898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm²/338 cm², capacity: 780 cycles/h. Platen dimensions X/Y: 755 mm/755 mm, tie bar distance: 500 mm/500 mm, mould height min./max.: 250 mm/600 mm, min. mould dimensions X/Y: 296 mm/296 mm. Includes crucible furnace, blow-off unit, dosing unit, and 4x control cabinets. Documentation available. Gbodpfx Asucfwpefdjn

Būklė: naujas, Cutting diameter: 225 mm Saw band length: 2480 mm Cutting width: 250 mm Cutting speed: 45 / 90 m/min Saw band dimensions: 2480 x 27 x 0.9 mm Cutting capacity at 45°: flat 135 x 185 - 145 x 150 mm Cutting capacity at 45°: round 150 mm Cutting capacity at 45°: square 145 mm Cutting capacity at 60°: flat 63 x 107 - 69 x 90 mm Gbsdpfx Aolb I Dajfdsn Cutting capacity at 60°: round 70 mm Cutting capacity at 60°: square 70 mm Cutting capacity at 90°: flat 240 x 160 - 250 x 110 mm Cutting capacity at 90°: round 225 mm Cutting capacity at 90°: square 185 mm Total power requirement: 0.75 / 1.1 kW Machine weight approx. 200 kg Space requirement approx. 1385 x 580 x 890 mm Technical Features: - Hydraulic system for controlled downfeed of the saw head - Automatic cut-off at end of cut - Powerful three-phase induction motor with 2 speeds and oil-bath gearbox - Saw bow, vise, and swivel components made of cast steel - Steel band guides with ball bearings - Quick-release vise - Front lever for locking the mitre adjustment - Coolant pump with aluminium housing - Large handwheel for easy blade tensioning - Pressure gauge to display band tension (600–1000 kg/cm³) - Emergency stop safety switch - Chip brush for cleaning the saw band STANDARD EQUIPMENT: - Mountable base cabinet - Coolant tank - Electric coolant pump - Length stop for serial cuts - Tools for blade change and adjustments - Chip removal brush - Hydraulic cylinder with feed control

Gamybos metai: 1999, būklė: labai geros būklės (naudotas), TRIULZI-IG Tilt Table for Glass Hydraulic Equipped with swivel castors The rollers retract to allow 360-degree movement of the glass (for sealing applications). Length: 3600 mm; Working height: 2400 mm Gsdpfx Afsiy Dtbedjbn Good working condition Good overall condition As is Immediately available