Gannomat Junior 323 pirkti naudotą (58)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, GANNOMAT "JUNIOR 323" Duodpfx Afjxdttij Aot FRAME DOWEL AND SLOT MORTISER Complete in standard configuration according to price list 01/22/D, with: - Precision collet chuck for ER 40 collets, Ø 3–26 mm. Includes collets Ø 10 / 13 / 16 / 20 - 1.5 kW motor, 2800 rpm - Position adjustment via digital counter - Position adjustment for 2 levels, pneumatic (0–100 mm) - Maximum drilling depth 150 mm - Precision indexing rail with 12 mm spacing, featuring: - Center detent and cross adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete stop system comprising: 1 central stop and 1 stop for extra-wide frames 1 stop rod, approx. 850 mm long (can be switched left to right) 2 flip stops - Slot mortising attachment, lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Extraction funnel Ø 80 mm, dust-tested Central mitre stop 45° Pair of auxiliary workpiece supports, swivel-mounted (left and right) Drill head receptacle 3-spindle drill head, 32 mm pitch (can be rotated 90°) Chassis with 4 castors, for easy relocation of the machine Availability: Immediately – short notice –

Būklė: naujas, Gamybos metai: 2026, Universalus masyvios medienos gręžimo staklės rėminėms konstrukcijoms ir ilgų angų darbams. Trumpas pristatymas: • Universalios naudojimo sritys: rėmų, įėjimo durų, langų gamyba, taip pat ilgų angų darbai ir kt. • Gręžimo gylis iki 150 mm (didesnis gręžimo gylis pasirenkamas) • Pneumatinis aukščio reguliavimas 2 lygiuose 0-100 mm, reguliuojama su mechaniniais skaitmeniniais skaitikliais • Gręžimas dviem lygiais laikant ruošinį vienoje padėtyje • Pneumatiniai ruošinio spaustuvai • Daugiaveleniai gręžimo galvutės (pasirinktinai) • Pneumatinis gręžimo padavimas (pasirinktinai) Dsdpfx Afjdx R D Se Ajut • Mobilus – su važiuokle (pasirinktinai) arba su palečių vežimėliu

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good condition, as new; the machine comes from a very small joinery and was only used very little there. The machine is in its original condition, it has only been cleaned; the paintwork has not been touched up. With this machine, you can mill slots and drill dowel holes on 2 levels without repositioning the workpiece. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill mortises for, for example, lock cases and similar applications, or produce all types of frame dowel joints—at right angles, butt, and mitre joints. Ideal for manufacturing dowel joints in timber frame construction, furniture, doors, windows, and staircases, as well as similar applications. Thanks to drilling on 2 levels, index stops, and the machine's layout, dowel joints are made in the shortest possible time, making the machine highly efficient. The machine requires a compressed air connection at 6 bar (very low air consumption). Clockwise rotation Mills and drills very precisely and cleanly. Comes with 2 angle stops (one center stop and one side stop, usable on both sides). Includes a mitre stop. At the front of the machine table, there's a 2000mm long stop rail with 2 flip stops; the rail can be shortened or extended if needed. Workpiece clamping is performed with 2 pneumatic clamping cylinders. Height adjustment from one drilling level to another is also pneumatic; the pneumatic switch is located at the front of the machine, allowing quick adjustment between index positions and drilling levels. Equipped with a precision 12mm indexing rail, featuring a center index and 12 stops to the left and right. Can quickly be converted to slot mortising; in this mode, the machine can be used without an index rail, with 2 adjustable stops on the left and right, providing a maximum working width of 420mm. Maximum drilling height is 100mm. Maximum drilling depth is 150mm with stop and scale. Maximum workpiece height is 160mm. Everything is functioning flawlessly. We deliver and demonstrate the machine personally across Germany for €220, so you take no risk when purchasing. Delivery to Austria and the EU is also possible upon request. Dusdjynv E Rspfx Af Ast Machine table is 870mm wide; the sides are 140mm deep and the center section is 350mm deep. Professional equipment, not DIY market junk. The machine is ready for immediate use. Comes with a 2-jaw drill chuck up to 20mm. Very robust and durable construction. The precision guides with play-free ball bearing bushings are in good condition and run smoothly.

Būklė: naujas, Gamybos metai: 2025, Advantages of Pre-glued Dowels • No additional glue required when shooting the dowel • No cleaning effort for the water supply system Advantages of DübelJet • Recoil-free gun • Simple handling • Mobile handheld device • Versatile application range Technical Data of DübelJet Dowel system and water supply system designed for pre-glued dowels • Dowel diameter: 8 mm • Dowel length: 35 mm (factory setting, adjustable from 30 to 40 mm) • Dowel projection: 12 mm (factory setting, adjustable from 7 to 20 mm) Versatile Application Range • Driving in pre-glued dowels (with water), especially in furniture manufacturing Djdowu Dnnspfx Af Ajut • Driving in positioning dowels (without water) made of wood or plastic, e.g., in frame construction or in combination with screws or carcass connectors

Būklė: naudotas, Gamybos metai: 1989, Darbo matmenys 3000 x 1250 x 650 mm Cilindro eiga 110 mm Staklės matmenys 3240 x 2120 x 770 mm Svoris apie 900 kg Dedjxu Egvepfx Af Asut

Būklė: naudotas, Gamybos metai: 2019, Machine construction: Through-feed/return Processing size in X-direction: 1300 mm Processing size in Y-direction: 5600 mm Processing thickness (Z-dimension): 60 mm Number of main spindles: 1 unit Main spindle power: 5.5 kW Main spindle speed: 1,000 – 20,000 rpm Clamping system: HSK-63 F Tool changer: Pick-up changer Tool changer positions: 3 units Back panel groove unit: Fixed in Y-direction Vertical drill spindles in X-direction: 3 units Vertical drill spindles in Y-direction: 10 units Horizontal drill spindles in X-direction: 2 units Djdpfx Ajymp N Tjf Asut Horizontal drill spindles in Y-direction: 6 units Control type: PC control Operating system: Windows Typewriter keyboard: Yes Mouse: Yes Programming system: Gannomat Editor DXF interface: Yes Office version available: Yes Online connectivity possible: Yes Table design: Fixed, smooth table Central lubrication: Automatic Tools: Various tools Operating hours: 920 h Weight approx.: 1,800 kg Extraction diameter: 3x 80 mm The machine has been modernized at the factory; pressure beam and control technology from model 0572! Location: Customer

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, - NEW - Make: Ganner Gannomat Dodedwi Rkjpfx Af Aeut Model: SELEKTA 253 220 V, 1 Ph, 50 Hz Complete in standard configuration with: - Fully automatic electronic control system with program selection switch: FLUSHING – GLUING – GLUING/DRIVING-IN - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of dowel feed rate - Automatic dowel diameter and dowel length monitoring with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed glue system with 6 bar glue pressure via glue nozzle, suitable for glues with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer, controlled by timer through the electronic control system - Selector switch GLUE/WATER for flushing/cleaning the glue system, with EasyClean function key (automatic cleaning program for the glue hose and glue nozzle via spray funnel and wastewater collection container) - Control lamp for remaining glue indicator in the glue container - 1 stainless steel container for 5 kg glue and 1 stainless steel container for 5 l water for flushing/cleaning - 4 casters for moving the machine Including 1 gun for dowels Ø 8 mm, dowel length 25 - 40 mm, driving-in depth 7 - 20 mm Air connection: 6 bar Price ex stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2026, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Dedpfey Egz Sex Af Aeut Technical data: Lamella case clamp from our showroom; Working range: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed case joints - Counterpressure surfaces are continuous 40 mm thick, coated support plates - The pressing force of the pressure beams is continuously electronically adjustable via 2 potentiometers and set using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams, min. 500 daN (kg) up to max. 2,200 daN (kg), continuously adjustable - Pressing force for vertical pressure beams, min. 300 daN (kg) up to max. 2,200 daN (kg), continuously adjustable - Included option: Rapid traverse travel speed for quick positioning of the pressure beams, controlled by automatic workpiece detection using sensors in the pressure beams; pressing speed 5/10/25 mm/sec and rapid traverse travel speed 50 mm/sec; sensors can be deactivated for clamping special workpieces. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cases. Easy operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm Machine is on display with us and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Būklė: labai geros būklės (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, skylių atstumas: 32 mm, Ganner Gannomat band and line boring machine Blum and Grass drilling head Duodpjq E Ur Ajfx Af Aet 7-spindle line boring head including extension rulers 32 mm system pneumatic version

Būklė: geras (naudotas), Gamybos metai: 1998, Universal frame dowel and slot mortising machine with angle adjustment Specially designed for stair and window manufacturing, as well as for universal applications thanks to pneumatic height adjustment. Angled dowelling and baluster drilling can be easily performed using the swiveling boring unit. Motor with pole switching, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Dusdpjxmatnofx Af Aet Motor start with convenient handle switch Equipped with Röhm two-jaw chuck 1 - 20mm Linear laser for precise workpiece positioning Drilling unit swivels 65° left/right Pneumatic adjustment of working height, dowelling possible on two levels without realignment Desired drilling heights can be preset for each drilling level using digital counter; pneumatic switching from the front Cross adjustment 340mm, stepless or in 12mm increments, with index rail Pneumatic clamping possible at any position, operable from the front Maximum height adjustment approx. 100mm above table height Boring stroke approx. 200mm 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front 2 swivel work supports Extraction funnel Center fence + 1 side fence Fixed miter fence Length stop as round bar Assortment of drill bits Operating manual CE marking Machine was partially repainted due to paint splashes Pneumatic hoses renewed Dimensions approx. 1200 x 1350 x 1600mm (LxWxH), weight 380kg The machine can be inspected by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse; see “other offers from this supplier.”

Būklė: geras (naudotas), Gamybos metai: 1994, mašinos/transporto priemonės numeris: 190 471, Gannomat Profi 370 alyvuogių gręžimo staklės Alyvuogių gręžimo staklės skirtos varčios vertikaliam padėjimui ir alyvuogių ertmės gręžimui iš nugaros pusės. - Aukščio ir gylio reguliuojamas gręžimo agregatas (aukštis su skaitikliu) - Pneumatinis cilindras ruošinio fiksavimui gręžimo metu - Ritinėlių takas ruošinio atramai - Nulenkiami atmušos pavaroms su fiksuota rankenos sėdėsena - Centrinio pozicionavimo atmuša pavaroms su kintama rankenos sėdėsena - Pakojis darbo procesui Djdpfsy Ad Haex Af Aeut - Pervežimo įrenginys Tvarkinga, patikimai ir laiko patikrinta mašina. Duomenys – žr. tipinę lentelę. Galima išbandyti vietoje. Klausimais kreipkitės!

Būklė: geras (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, dvivietė skylučių gręžimo mašina GANNER, kiekvienoje eilėje po 21 veleną Dedpfxoxlt T Se Af Aout

Būklė: labai geros būklės (naudotas), Parduodu Ganner firmos kaiščių įkalimo mašiną labai geros būklės Dusdpfxeyyahne Af Aet

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, Gannomat Model 260 Carcase Press Clamping dimensions: 2500 x 1250 x 650 mm Working pressure: 0-10 bar Cylinder stroke: 110 mm Space requirement: 3240 x 2120 x 770 mm Weight: 900 kg Year of manufacture: 2010 Dusdsrfbnbepfx Af Aot CE compliant The machine is currently being refurbished; further photos will be available shortly.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Gannomat Concept 70 Eco Cabinet Press Year of manufacture: 2025 including the following options: - Rapid traverse speed: adjustment speed up to 50 mm/sec - Machine feet (working height 500 mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints during carcass pressing, as well as for drawer production. Brief overview: • Field-proven tolerance compensation (GANNOMAT system) • Two potentiometers for infinitely adjustable pressing force • Minimum pressing force: 300/500 daN (kg) for Concept Eco, minimum pressing force: 600/800 daN (kg) for Concept Primus • Maximum pressing force: 2200 daN (kg) for Concept Eco, maximum pressing force: 3500 daN (kg) for Concept Primus • Three pressing and adjustment speeds: 5 / 10 / 25 mm/sec (with fine positioning / creep speed) Dusdsvxgrrepfx Af Aet • Freely selectable pressing time preset with automatic opening • Concept Eco: Simplest operation via six separate pushbuttons for eight movement sequences • Concept Primus: Simplest operation via LCD display Universal application: • Cabinets, e.g. for furniture and cupboards • Mitered carcases • Carcases with protruding tops • Drawers, drawer boxes • Simultaneous pressing of multiple cabinets / drawers Advantages: • Proven tolerance compensation (GANNOMAT system) • Electromechanical cabinet press with frequency-controlled gear motors • Independently adjustable vertical and horizontal pressing beams • Extended service life thanks to proven, high-quality components • Sturdy and robust construction • Space-saving design • Cabinet pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Easy to operate via straightforward and practical control panel • Fast thanks to beam positioning speeds up to 50 mm/sec (optional) • Efficient due to precise pressing of various carcass sizes • Flexible through adjustable parameters such as pressing force, pressing time, movement speeds • Precise due to angle-accurate pressing of furniture cabinets and drawers • Professional production of cabinets and drawers with a modern cabinet press

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1990, Motors: 2 x 1.85A, 50Hz, 380V, 2800 RPM Operating air pressure: 6 bar Dedpfx Afev Nptmo Ajut 30 spindles, diameter 10 mm, mounting Combined foot switch Emergency stop switch Main switch Height adjustment: manual Side adjustment: manual

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW Dsdpfxov Npw Ee Af Asut air connection 6 bar fully automatic pneumatic control with foot valve additional switch for "chip removal" program T-type drilling head with 7+2 drilling spindles, 32 mm pitch drill shank diameter 10 mm swivels 90°, with locking undercarriage

Būklė: geras (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, Power supply: 380V, 3.3A Motor power: 1.1 kW, 2800 rpm Automatic pneumatic control with control panel Drilling head with 23 spindles, 32 mm pitch Adjustable drilling depth Drill shank: 10 mm Position adjustment: 5–60 mm Clamping height: 80 mm Pass-through width: 800 mm Dujdjq Auwtepfx Af Aot Dimensions: 1200 x 900 mm Weight: approx. 400 kg Includes: 1x template for row drilling 1x template for side stop 1x stop guide rail 1500 mm 1x stop guide rail 2000 mm

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Drilling and inserting machine for all types of furniture fittings, row drilling and group hole drilling machine in System 32 Power supply: 400V 0.75kW Spindle speed: 2,800 rpm Stop ruler: 960 mm Duodpfxeumw Sbo Af Ajt 2x swivel stops For drill bits with shaft diameter 10 mm Maximum workpiece thickness: 40 mm Includes: 1x 7-spindle drilling head for row drilling, 32 mm pitch, with integrated locking pins Manual feed Base frame Available at extra cost: Olive drilling head €450.00 Mepla drilling head with insertion die €550.00 Hettich drilling head with insertion die €550.00

Būklė: naujas, Gamybos metai: 2026, SURFACE CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction - Lateral pressing beam featuring a continuous pressure surface with a 25 mm thick, coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick, coated support plates - Electromotive adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased lead and concentricity accuracy) and high-performance slide nuts with grease reservoir - Pressing is electromotive via a worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely electronically adjustable by potentiometer and regulated via frequency converter, ensuring completely wear-free press force control - Pressing force for vertical pressing beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, controlled via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the pressing beam, e.g., for low pressing forces such as drawers, etc. - Simple operation via 2 separate push buttons, 2 movement sequences (Open/Close) selectable from the control panel - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both pressing beams - Repress function to increase or decrease pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Minimum length: 150 mm, Maximum length: 1300 mm Minimum height: 150 mm, Maximum height: 1700 mm Depth: 700 mm Duedpfxow Sgnke Af Aet Electrical connection: 400 Volt, 50 Hz, 16 A Availability: short notice

Būklė: naujas, Gamybos metai: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND SLOT BORING MACHINE Duedpfx Aoxdttpsf Aot ESPECIALLY FOR STAIRCASE CONSTRUCTION Complete in standard design according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets, Ø 3-26 mm incl. collets Ø 10 / 13 / 16 / 20 - Two-speed switchover motor 1400/2800 rpm, 1.5 kW - Linear laser with holder - Boring unit, steplessly rotatable from the front (65°-0°-65°) - Position adjustment via digital counter - Positioning adjustment for 2 levels, pneumatic (0-100 mm) - Max. drilling depth 200 mm - Precision indexing rail with 12 mm increments, with central locking t and cross adjustment of 320 mm - Complete stop system consisting of: 1 central stop and 1 stop for extra-wide frames 1 stop bar approx. 850 mm long (can be relocated from left to right in mirror image) 2 folding stops - Slot mortising device, retractable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter fence adjustable 0°-60° Pneumatic clamping of the X-axis with on/off switch on the indexing lever Pair of workpiece support arms, swivelling (left and right) Clamping column can be repositioned to the front Chassis with 4 wheels for easy transport of the machine 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm made of chrome steel with centering tip Availability: short notice

Būklė: naujas, Gamybos metai: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard version with: - Support with linear guidance consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for 8 mm Ø dowels, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traverse speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position over table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth from 0–35 mm (with drill length GL 70 mm) automatically set with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity of 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for rinsing glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 liters water - Indicator lamp for glue level display in glue container Dsdpfow Sgm Hjx Af Aeut - 1 pc. left side fence, 1 pc. right side fence (both removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic inclined clamping cylinders 10° for workpiece thickness up to max. 80 mm, minimum workpiece length (Y) 70 mm - 1 pc. suction hood, connection Ø 80 mm - 1 pc. TCT control with: Built-in industrial PC incl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, 15" capacitive TFT industrial touchscreen display, Operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-driven user software, drilling positions freely programmable with ABSOLUTE, RELATIVE or GRID dimensions, automatic workpiece mirroring and operation optimization, two workzones programmable with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, plain text error diagnostics - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle Art. no. 0470-0810 - 1 EASY CLEAN system for automatic test glue shots prior to the start of the work program (drilling/gluing/dowel insertion). E.C.S. for 1 pc. glue nozzle Art. no. 0471-Z010 - 1 single-spindle vertical drilling unit, drilling from above, 0.65 kW (3000/5000/8000 rpm), Y-position manually adjustable via mechanical digital counter from 5–40 mm, max. drilling depth (Z) 30 mm (with drill length GL 57 mm). Max. workpiece thickness (Z) 50 mm, minimum workpiece length (Y) 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) Art. no. 0471-0830 - 4 vertical inclined clamping cylinders 10° with holder, additional, Art. no. 0470-0850 Available: at short notice

Būklė: naujas, Gamybos metai: 2025, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg Dedpfeiidm Nex Af Asut - immediately available -

Būklė: naudotas, Gamybos metai: 2023, New demonstration machine! List price: €86,567 net. Base machine complete in standard configuration for drilling and grooving. For detailed technical specifications, please refer to the data sheet for ProTec Type 0571. Working unit with: PowerBlock with 21 spindles and 1 grooving saw: - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y Fourth drilling axis in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed mode, max. 5600 mm programmable workpiece length in software Duedpfx Asw Tfzfjf Ajt - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000–20,000 rpm with frequency inverter, reversible rotation, for HSK63F tool holders with ER 462E/OZ25 collet chuck, cutter length up to 130 mm. Information: MultiUnit machining head with PowerBlock with 21/23 spindles, grooving saw, and optional Profit milling unit. Connection values: - Connected load: 12 kVA - Rated current: 17.5 A - Fuse: 32 A - Voltage: 400 V, 50 Hz, 3-phase (without transformer) - Network: TN or TT - Pneumatic connection: 7 bar (102 psi) On the machine: Coupling plug (quick coupling) ¼", DN7.2, brass, factory-fitted To the machine: Coupling socket (quick coupling) ¼", DN7.2, brass, customer side Supply line, minimum hose internal diameter 12 mm Compressed air demand: Continuous air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air) Extraction: - Connection: 3 x extraction nozzles, Ø 80 mm - Extraction speed: 30 m/sec (measured at extraction nozzle) - Extraction requirement: min. approx. 2500 m³/h Machine weight: approx. 1650 kg (with options!) Machine installation site: A ProTec fix can, in principle, be bolted to the floor. A concrete floor (or foundation) is required—at least at the four machine corners/feet. Equipment: - Protec 571 Profit HSK63F with 3-position magazine - Folding roller table 765 mm (Y-axis), for machine front, width 500 mm - Folding roller table 765 mm (Y-axis), for machine rear, width 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Additional safety device via lamellar curtain - Necessary for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill set for Protec: - Shank Ø 10 mm with clamping surface (JSO) - 1 HW roof tip drill 5x70mm (NL 35mm), LH #30566-5-05035-L - 3 HW dowel drills 5x70mm (NL 35mm), RH #30540-5-05035-R - 4 HW dowel drills 5x70mm (NL 35mm), LH #30540-5-05035-L - 3 HW dowel drills 8x70mm (NL 35mm), RH #30540-5-08035-R - 5 HW dowel drills 8x70mm (NL 35mm), LH #30540-5-08035-L - 2 HW dowel drills 10x70mm (NL 35mm), LH #30540-5-10035-L - 1 HW cup drill 15x70mm (NL 35mm), LH #30300-5-15070-L - 1 HW cup drill 20x70mm (NL 35mm), RH #30300-5-20070-R - 1 HW cup drill 35x70mm (NL 35mm), RH #30300-5-35070-R - HW grooving cutter Ø 125/30 mm - Groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and after consultation Tool holders HSK63F 3 pcs For collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm, 3 pcs Insert cutter shank Z1+1, 1 pc HW with reversible knife drill tip Ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW insert Z1, 1 pc with reversible knife drill tip, D Ø10 mm, d Ø10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separately) Decorative

Būklė: naudotas, Gamybos metai: 2017, Gręžimo velenų kiekis: 21 vnt Žingsnis: 32 mm Grąžto tvirtinimas: Grąžto kotelio spaudimo paviršius: 10 mm Valdymas: kojinis pedalas Duodpfx Aeihghref Ast Įrankiai: Taip Gręžimo kryptis: iš apačios ir iš priekio Pasukimas: rankinis Pasukimo kampas: tik 0° arba 90° Maks. laisvas aukštis: 80 mm Maks. laisvas plotis: 750 mm Medžiagos spaustuvų kiekis: 3 vnt Medžiagos prispaudimo tipas: pneumatinis Tipas: stacionarus Atramos sistema: tik konstrukcijų serijai Svoris apie: 400 kg Variklio galia: 1,5 kW Nusiurbimo skersmuo: 120 mm Sandėliavimo vieta: pas klientą