Gannomat Junior 323 pirkti naudotą (58)

Sąlyga: naujas, Gamybos metai: 2025, Advantages of Pre-glued Dowels • No additional glue required when shooting the dowel • No cleaning effort for the water supply system Iodpjwu Dnnsfx Af Ietb Advantages of DübelJet • Recoil-free gun • Simple handling • Mobile handheld device • Versatile application range Technical Data of DübelJet Dowel system and water supply system designed for pre-glued dowels • Dowel diameter: 8 mm • Dowel length: 35 mm (factory setting, adjustable from 30 to 40 mm) • Dowel projection: 12 mm (factory setting, adjustable from 7 to 20 mm) Versatile Application Range • Driving in pre-glued dowels (with water), especially in furniture manufacturing • Driving in positioning dowels (without water) made of wood or plastic, e.g., in frame construction or in combination with screws or carcass connectors

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, skylių atstumas: 32 mm, Ganner Gannomat band and line boring machine Blum and Grass drilling head 7-spindle line boring head Isdpfxjq E Ur Ao Af Ietb including extension rulers 32 mm system pneumatic version

Sąlyga: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, Fully automatic electronic control with program selector switch WASHING-GLUING-GLUING/DRIVING - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of the dowel feed rate Iodpfxjv Aubps Af Ietb - Closed glue system with 6 bar glue pressure via glue nozzle - Selector switch GLUE/WATER for flushing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) - 1 stainless steel container for 7.5 kg glue, as well as 1 stainless steel container for 7.5 l water for flushing/cleaning incl. 1 gun for dowels Ø 8 mm Dowel length 25 - 40 mm Gluing / dowel driving tool fully overhauled and not used since

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1990, Motors: 2 x 1.85A, 50Hz, 380V, 2800 RPM Operating air pressure: 6 bar 30 spindles, diameter 10 mm, mounting Combined foot switch Emergency stop switch Main switch Height adjustment: manual Itodpfxov Nptmo Af Ieb Side adjustment: manual

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW air connection 6 bar Itodpfev Npw Eox Af Ieb fully automatic pneumatic control with foot valve additional switch for "chip removal" program T-type drilling head with 7+2 drilling spindles, 32 mm pitch drill shank diameter 10 mm swivels 90°, with locking undercarriage

Sąlyga: geras (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, Power supply: 380V, 3.3A Motor power: 1.1 kW, 2800 rpm Automatic pneumatic control with control panel Drilling head with 23 spindles, 32 mm pitch Adjustable drilling depth Drill shank: 10 mm Position adjustment: 5–60 mm Clamping height: 80 mm Pass-through width: 800 mm Dimensions: 1200 x 900 mm Itedpfx Afoq Auwte Ijb Weight: approx. 400 kg Includes: 1x template for row drilling 1x template for side stop 1x stop guide rail 1500 mm 1x stop guide rail 2000 mm

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Drilling and inserting machine for all types of furniture fittings, row drilling and group hole drilling machine in System 32 Power supply: 400V 0.75kW Spindle speed: 2,800 rpm Stop ruler: 960 mm 2x swivel stops For drill bits with shaft diameter 10 mm Maximum workpiece thickness: 40 mm Includes: Isdeumw Sbepfx Af Istb 1x 7-spindle drilling head for row drilling, 32 mm pitch, with integrated locking pins Manual feed Base frame Available at extra cost: Olive drilling head €450.00 Mepla drilling head with insertion die €550.00 Hettich drilling head with insertion die €550.00

Sąlyga: naudotas, No. 3238 Dowel Drilling Machine Gannomat Combi RB 110 Used Precision universal dowel hole drilling machine for cabinet, frame, fitting, and line boring operations in System 32. The table and drilling beam can be pneumatically swivelled 90° together. Short workpieces can be inserted vertically. Ijdpfxow Id T Ns Af Ijtb Easy drilling for cup hinges and connecting fittings. Mitre and flat frame drilling. Drilling from below. Drilling on longitudinal and cross rails at the center stop. Fully automatic pneumatic control with control panel. Working width: 800 mm. Drilling beam: 23 spindles, 32 mm pitch. Drilling stroke: 75 mm. Drill unit position adjustment: 0 - 60 or 110 mm. Spindle speed: 2,800 rpm. Drill shank diameter: 10 mm. Maximum clamping height of workpieces: 80 mm. Motor: 1.5 kW, 380 V. Compressed air connection: 6 bar. Approx. weight: 450 kg Sale on behalf of customer, ex-location near 69124 Heidelberg, without dismantling, transport, or installation. Dismantling, loading, and transport by us available as an option. Subject to errors in description and price. To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. Sale as is. Technical data, condition description, year of construction, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the following applies: “purchased as inspected.” Images and videos serve as examples and do not represent the actual scope of delivery. Terms of payment: Prices plus statutory VAT, payment before collection or shipping. Delivery terms: Ex location.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, GANNOMAT "JUNIOR 323" Itodpjxdttijfx Af Ieb FRAME DOWEL AND SLOT MORTISER Complete in standard configuration according to price list 01/22/D, with: - Precision collet chuck for ER 40 collets, Ø 3–26 mm. Includes collets Ø 10 / 13 / 16 / 20 - 1.5 kW motor, 2800 rpm - Position adjustment via digital counter - Position adjustment for 2 levels, pneumatic (0–100 mm) - Maximum drilling depth 150 mm - Precision indexing rail with 12 mm spacing, featuring: - Center detent and cross adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete stop system comprising: 1 central stop and 1 stop for extra-wide frames 1 stop rod, approx. 850 mm long (can be switched left to right) 2 flip stops - Slot mortising attachment, lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Extraction funnel Ø 80 mm, dust-tested Central mitre stop 45° Pair of auxiliary workpiece supports, swivel-mounted (left and right) Drill head receptacle 3-spindle drill head, 32 mm pitch (can be rotated 90°) Chassis with 4 castors, for easy relocation of the machine Availability: Immediately – short notice –

Sąlyga: naujas, Gamybos metai: 2026, Universalus masyvios medienos gręžimo staklės rėminėms konstrukcijoms ir ilgų angų darbams. Trumpas pristatymas: Ijdpfedx R D Sox Af Iotb • Universalios naudojimo sritys: rėmų, įėjimo durų, langų gamyba, taip pat ilgų angų darbai ir kt. • Gręžimo gylis iki 150 mm (didesnis gręžimo gylis pasirenkamas) • Pneumatinis aukščio reguliavimas 2 lygiuose 0-100 mm, reguliuojama su mechaniniais skaitmeniniais skaitikliais • Gręžimas dviem lygiais laikant ruošinį vienoje padėtyje • Pneumatiniai ruošinio spaustuvai • Daugiaveleniai gręžimo galvutės (pasirinktinai) • Pneumatinis gręžimo padavimas (pasirinktinai) • Mobilus – su važiuokle (pasirinktinai) arba su palečių vežimėliu

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2017, ašių skaičius: 6, Šis 6 ašių GANNOMAT ProTec 571 buvo pagamintas 2017 m., turi tikslų plieninį stalą ir 1000 mm darbinės eigos ilgį X ašyje. Jame yra gręžimo įrenginys su 13 vertikalių ir 6 horizontaliais velenais, frezavimo įrenginys su 3000-18000 aps/min. galios diapazonu ir griovelių ruošimo įrenginys Y. Jei norite įsigyti aukštos kokybės medžio apdirbimo galimybes, apsvarstykite mūsų parduodamas stakles "GANNOMAT ProTec 571". Susisiekite su mumis ir gaukite daugiau informacijos. Mašinos privalumai Techninės mašinos privalumai • Darbinis eigos ilgis (x ašis): 1000 mm • Darbinis aukštis: 905 mm • Dydis x ašyje: min. 85 mm / maks. 1000 mm • Dydis y ašyje: min. 285 mm / maks. Neribojamas (maks. 70 kg) • Dydis z ašyje: min. 6 mm / maks. 60 mm • Tikslus plieninis darbastalis • Gręžimo įrenginys bk6: 1,5 kw variklis, 3200 aps. /min. • Vertikalūs verpstės: 13 vnt. // horizontalūs verpstės: (3+3) y ašyje, (1+1) x ašyje Itedpfsx U Thwjx Af Isb • Frezavimo agregatas: 4,5 kw, 3000–18000 aps. /min. • Griovelių pjovimo įrenginys y ašyje Papildoma informacija Mašina vis dar įjungta

Sąlyga: naudotas, Gamybos metai: 2023, New demonstration machine! List price: €86,567 net. Base machine complete in standard configuration for drilling and grooving. For detailed technical specifications, please refer to the data sheet for ProTec Type 0571. Working unit with: PowerBlock with 21 spindles and 1 grooving saw: - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y Fourth drilling axis in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000–20,000 rpm with frequency inverter, reversible rotation, for HSK63F tool holders with ER 462E/OZ25 collet chuck, cutter length up to 130 mm. Information: MultiUnit machining head with PowerBlock with 21/23 spindles, grooving saw, and optional Profit milling unit. Connection values: - Connected load: 12 kVA - Rated current: 17.5 A - Fuse: 32 A - Voltage: 400 V, 50 Hz, 3-phase (without transformer) - Network: TN or TT - Pneumatic connection: 7 bar (102 psi) On the machine: Coupling plug (quick coupling) ¼", DN7.2, brass, factory-fitted To the machine: Coupling socket (quick coupling) ¼", DN7.2, brass, customer side Supply line, minimum hose internal diameter 12 mm Compressed air demand: Continuous air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air) Extraction: - Connection: 3 x extraction nozzles, Ø 80 mm - Extraction speed: 30 m/sec (measured at extraction nozzle) - Extraction requirement: min. approx. 2500 m³/h Machine weight: approx. 1650 kg (with options!) Machine installation site: A ProTec fix can, in principle, be bolted to the floor. A concrete floor (or foundation) is required—at least at the four machine corners/feet. Equipment: - Protec 571 Profit HSK63F with 3-position magazine - Folding roller table 765 mm (Y-axis), for machine front, width 500 mm - Folding roller table 765 mm (Y-axis), for machine rear, width 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Additional safety device via lamellar curtain - Necessary for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill set for Protec: - Shank Ø 10 mm with clamping surface (JSO) - 1 HW roof tip drill 5x70mm (NL 35mm), LH #30566-5-05035-L - 3 HW dowel drills 5x70mm (NL 35mm), RH #30540-5-05035-R - 4 HW dowel drills 5x70mm (NL 35mm), LH #30540-5-05035-L - 3 HW dowel drills 8x70mm (NL 35mm), RH #30540-5-08035-R - 5 HW dowel drills 8x70mm (NL 35mm), LH #30540-5-08035-L - 2 HW dowel drills 10x70mm (NL 35mm), LH #30540-5-10035-L - 1 HW cup drill 15x70mm (NL 35mm), LH #30300-5-15070-L - 1 HW cup drill 20x70mm (NL 35mm), RH #30300-5-20070-R - 1 HW cup drill 35x70mm (NL 35mm), RH #30300-5-35070-R - HW grooving cutter Ø 125/30 mm - Groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and after consultation Tool holders HSK63F 3 pcs For collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm, 3 pcs Insert cutter shank Z1+1, 1 pc HW with reversible knife drill tip Ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW insert Z1, 1 pc with reversible knife drill tip, D Ø10 mm, d Ø10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separately) Decorative Iodpfx Aew Tfzfof Ijtb

Sąlyga: naudotas, Gamybos metai: 1999, veikimo valandos: 55 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1088.968, bendras plotis: 700 mm, bendras ilgis: 900 mm, bendras aukštis: 650 mm, ašies skaičius: 5, bendras svoris: 70 kg, Siūlome šią naudotą Gannomat Modell204 furnitūros gręžimo staklę, pagamintą 1999 m. Itsdpfxeyak Hyo Af Iob

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, complete in standard configuration with: - Robust, distortion-free steel frame in welded and bolted construction - PRESS BEAM LATERALLY with continuous pressure surface with 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, base) are continuous 25 mm thick, coated support plates - Electrically motorised adjustment of the press beam via precision trapezoidal lead screws (with enhanced pitch and concentricity accuracy) and high-performance travelling nuts with grease reservoir - Pressing is performed electrically via a worm gear motor (0.75 kW) Itodpfswx Nfgox Af Isb - The pressing force of the press beam is infinitely variable and electronically set via potentiometer and regulated by frequency converter, providing absolutely wear-free pressure control - Press force for vertical press beam minimum 300 daN (kg) up to infinitely adjustable maximum of 2200 daN (kg) - Pressing and adjustment speed of press beams with fine positioning, selectable via 3-stage switch: 5 / 10 / 25 mm/second - Easiest operation via two separate push buttons, two movement sequences (open/close) selectable via control system - Freely adjustable pressing time preselection with automatic opening 0–30 min (switchable to seconds or hours) - Working height/loading height 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400V, 3Ph, 50Hz (1.6 kVA, 16 A)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, LAMELLA – CARCASE PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration comprising: - Stable, torsion-resistant steel frame in welded and bolted construction - Top lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams with proven tolerance compensation (Ganner system) for tightly compressed carcase joints - Counter-pressure surfaces (side pressure wall, base) are continuous, 38 mm thick coated support plates - Continuous pressing surface with a height of 95 mm on the bottom vertical press beam - Electromotoric adjustment of both press beams via precision trapezoidal threaded spindles (with enhanced pitch and concentricity accuracy) and high-performance lead nuts with grease reservoirs - Pressing is carried out electromotorically via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the press beams is infinitely electronically adjustable via 2 potentiometers and controlled by frequency inverters, thus the pressing force regulation is absolutely wear-free - Pressing force for horizontal press beam min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for the vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second Easiest operation - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height of 500 mm Operating manual in German Itedpfx Aew Td A Ijf Ieb Completely overhauled by Ganner, parts warranty 6 months Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2026, SURFACE CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction - Lateral pressing beam featuring a continuous pressure surface with a 25 mm thick, coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick, coated support plates Iodew Sgnkspfx Af Ijtb - Electromotive adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased lead and concentricity accuracy) and high-performance slide nuts with grease reservoir - Pressing is electromotive via a worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely electronically adjustable by potentiometer and regulated via frequency converter, ensuring completely wear-free press force control - Pressing force for vertical pressing beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, controlled via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the pressing beam, e.g., for low pressing forces such as drawers, etc. - Simple operation via 2 separate push buttons, 2 movement sequences (Open/Close) selectable from the control panel - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both pressing beams - Repress function to increase or decrease pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Minimum length: 150 mm, Maximum length: 1300 mm Minimum height: 150 mm, Maximum height: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Availability: short notice

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, LAMELLA/CARCASS PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Ijdpfsw Tdymox Af Istb Carcass joints. - Counter-pressure surfaces (side pressure wall, base) are 40 mm thick, coated, continuous support plates - Electromotoric adjustment of both press beams via precision trapezoidal threaded spindles (with enhanced pitch and concentricity accuracy) and high-performance running nuts with grease reservoir. - Pressing operation is electromotorically driven by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force: 2000 daN (kg) per pressing beam. - The pressing force of the beam is electronically regulated and set via frequency inverter, ensuring completely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec. - Simple operation via 6 separate push buttons, 6 motion sequences selectable via control unit. - Freely adjustable pressing time preset with automatic opening function 0-30 min (switchable to seconds or hours). - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - 1 selector switch for variable pressing force 1000 / 1500 / 2000 daN (kg) Machine no. 380.324 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for 500 mm working height included Used machine: Year of manufacture 2013, completely overhauled by Ganner, 6-month parts warranty Special price: ex-stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND SLOT BORING MACHINE ESPECIALLY FOR STAIRCASE CONSTRUCTION Complete in standard design according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets, Ø 3-26 mm incl. collets Ø 10 / 13 / 16 / 20 - Two-speed switchover motor 1400/2800 rpm, 1.5 kW - Linear laser with holder - Boring unit, steplessly rotatable from the front (65°-0°-65°) - Position adjustment via digital counter - Positioning adjustment for 2 levels, pneumatic (0-100 mm) - Max. drilling depth 200 mm - Precision indexing rail with 12 mm increments, with central locking t and cross adjustment of 320 mm - Complete stop system consisting of: Itedpfoxdttpjx Af Isb 1 central stop and 1 stop for extra-wide frames 1 stop bar approx. 850 mm long (can be relocated from left to right in mirror image) 2 folding stops - Slot mortising device, retractable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter fence adjustable 0°-60° Pneumatic clamping of the X-axis with on/off switch on the indexing lever Pair of workpiece support arms, swivelling (left and right) Clamping column can be repositioned to the front Chassis with 4 wheels for easy transport of the machine 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm made of chrome steel with centering tip Availability: short notice

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, - NEW - Manufacturer: Ganner Gannomat Model: SELEKTA 253 220 V, 1 phase, 50 Hz Complete in standard configuration with: - Fully automatic electronic control with program selector switch Isdsdwi Rkepfx Af Istb FLUSH-GLUE-GLUE/INSERT - Dowel feed via electronic vibrating feeder with potentiometer for stepless adjustment of the dowel feed rate - Automatic dowel diameter and length control with Auto-DL-Selekt System (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed glue system with 6 bar glue pressure via glue nozzle for adhesives with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via time preselection through electronic control - Selector switch GLUE/WATER for flushing/cleaning the gluing system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and wastewater collection container) - Indicator lamp for glue level warning in the glue container - 1 stainless steel container for 5 kg glue and 1 stainless steel container for 5 l water for flushing/cleaning - 4 casters for moving the machine Including 1 dowel gun for dowel Ø 8 mm, dowel length 25 - 40 mm, Insertion protrusion 7 - 20 mm Air connection: 6 bar Price from 11,750 EUR From stock 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Itsdpfsw Sgm Hsx Af Iob Complete in standard version with: - Support with linear guidance consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for 8 mm Ø dowels, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traverse speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position over table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth from 0–35 mm (with drill length GL 70 mm) automatically set with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity of 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for rinsing glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 liters water - Indicator lamp for glue level display in glue container - 1 pc. left side fence, 1 pc. right side fence (both removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic inclined clamping cylinders 10° for workpiece thickness up to max. 80 mm, minimum workpiece length (Y) 70 mm - 1 pc. suction hood, connection Ø 80 mm - 1 pc. TCT control with: Built-in industrial PC incl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, 15" capacitive TFT industrial touchscreen display, Operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-driven user software, drilling positions freely programmable with ABSOLUTE, RELATIVE or GRID dimensions, automatic workpiece mirroring and operation optimization, two workzones programmable with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, plain text error diagnostics - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle Art. no. 0470-0810 - 1 EASY CLEAN system for automatic test glue shots prior to the start of the work program (drilling/gluing/dowel insertion). E.C.S. for 1 pc. glue nozzle Art. no. 0471-Z010 - 1 single-spindle vertical drilling unit, drilling from above, 0.65 kW (3000/5000/8000 rpm), Y-position manually adjustable via mechanical digital counter from 5–40 mm, max. drilling depth (Z) 30 mm (with drill length GL 57 mm). Max. workpiece thickness (Z) 50 mm, minimum workpiece length (Y) 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) Art. no. 0471-0830 - 4 vertical inclined clamping cylinders 10° with holder, additional, Art. no. 0470-0850 Available: at short notice

Sąlyga: naujas, Gamybos metai: 2025, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Itedpfxeiidm Ne Af Iob Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" Working Width 1300 Drilling, Grooving, Milling Base machine complete in standard version as per price list 01/19/D: For detailed technical data, see PROTEC Type 0571 data sheet - Processing unit with: PowerBlock with 21 spindles and 1 grooving saw (BK 1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y axis - 2 horizontal drilling spindles in X axis - 1 grooving unit in Y axis 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, 5.5 kW motor (S1), 1000-20000 rpm with frequency converter, right and left rotation, HSK63F tool holder with 462E collet, milling cutter length up to 130 mm. - INCLUDING OPTION: Additional safety device with lamella curtain for processing Lamello P-System. Required for horizontal milling for Lamello P-System with slot cutter Ø 100.4 x 7 x 30 mm. - Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in throughfeed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. - Air supply: 7 bar Machine No. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A) - Top pressure device for working width 1300 mm - Roller table 765 mm (Y axis), foldable, for machine front, B 500 mm - Roller table 765 mm (Y axis), foldable, for machine rear, B 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction manifold Ø 160 mm / Ø 80-80-80 mm, spacing 196 mm - Documentation in German: Operating instructions: GERMAN Itjdow Sguwspfx Af Isb Programming instructions: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: geras (naudotas), Gamybos metai: 1998, Universally applicable frame dowel and slot drilling machine with adjustable angle. Specifically designed for stair construction, window manufacturing, and versatile use thanks to pneumatic height adjustment. Angled doweling and baluster drilling can be easily accomplished with the swiveling drilling unit. - Motor switchable for pole configuration, two speeds - Motor power 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor is started via a convenient handle switch - Equipped with Röhm two-jaw chuck 1 - 20mm - Linear laser for precise workpiece positioning - Drilling unit can be swiveled 65 degrees to the left and right - Pneumatic adjustment of the working height, allowing doweling on two levels without resetting. - Desired drilling heights can be set for each drilling level with a digital counter; switching between levels is done pneumatically from the front. - 340mm lateral adjustment, continuously variable or in 12mm increments, with a toothed rail - Pneumatic clamping possible at any position, operated from the front - Maximum height adjustment approx. 100mm above table height - Drilling stroke approx. 200mm - 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front - 2 swiveling workpiece supports - Extraction funnel - Center stop + 1 lateral stop - Fixed miter stop - Length stop as a round bar - Assorted drills - Operating manual - CE marking - The machine has been partially repainted due to paint splashes. - Pneumatic hoses replaced Ijdpfxjxmatnj Af Iotb Dimensions approx. 1200 x 1350 x 1600mm (LxWxH), weight 380kg. The machine can be inspected on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See "more offers from this seller."

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2016, LAMELLA - CARCASE PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction - Upper lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams with proven tolerance compensation system (Ganner system) for tightly pressed carcase joints - Counter-pressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Electromotive adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and concentricity accuracy) and high-performance lead nuts with grease reservoir - Pressing is performed electromotively via 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of the press beams is steplessly electronically adjustable via 2 potentiometers and controlled by frequency converters, making the press force regulation completely wear-free - Pressing force for horizontal press beam min. 500 daN (kg), stepless up to max. 2200 daN (kg) Pressing force for vertical press beam min. 300 daN (kg), stepless up to max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-step selector switch: 5 / 10 / 25 mm/second Extremely easy operation - Working height/loading height: 300 mm - Working dimensions: length min. 150 mm, max. 2500 mm; height min. 150 mm, max. 1400 mm; depth: 700 mm Iodpfx Ajxvitiof Ietb Machine no. 563.624 400V, 3-phase, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height of 500 mm Operating manual in German Fully overhauled by Ganner, parts warranty 6 months Location: from stock 54634 Bitburg - Immediately available -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, CNC-controlled precision machining center Gannomat Type Protec 571 CNC • For drilling, grooving, and milling Machining unit with PowerBlock featuring 21 spindles and 1 grooving saw: • Vertical drilling spindles: 13 • Horizontal drilling spindles in Y: 6 Itodewvk Aujpfx Af Ijb • Horizontal drilling spindles in X: 2 • Grooving unit in Y: 1 • Milling unit 'Profit': 4.5 kW, 3000 - 18000 rpm, with frequency converter • Workpiece width (X): min. 85 mm / max. 1000 mm • Workpiece thickness (Z): min. 6 mm / max. 60 mm • Workpiece length (Y): min. 285 mm in through-feed mode / max. 5600 mm programmable in software • Workpiece weight: max. 70 kg Processing speeds per axis: • On the X-axis: max. 90 m/min • On the Y-axis: max. 30 m/min • On the Z-axis: max. 15 m/min