Sraigtinių skylių gręžimo mašina

Gannomat DB 21-27-35

Būklė: naudotas, Gamybos metai: 2024, Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" – complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal: clamping – drilling – releasing; electrical intermittent operation. - Automatic retraction of the drilling unit upon reaching the preset drilling depth. Hnsdpoxnlflefx Ag Eop - Automatic extension of drilling depth for face-end drilling. This eliminates the need to manually adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, drilling depth flat face 14 mm, drilling depth end face 24 mm). - 1 drilling beam with 21 spindles, 32 mm spacing, 1.5 kW motor (drilling feed 0–70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit replacement. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping carriage adjustable along the Y-axis, with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal positioning system comprising: - 1 positioning rail, 1800 mm, for shelf drilling (aluminum profile 40 x 40 mm) with 3 flip stops - With quick-change system, easily convertible from right to left for mirrored shelf drilling in carcass construction. Also suitable for line boring in System 32. - Side stops and position settings, as well as the drilling height adjustment over the support table, using mechanical digital counters. - Side stops are easily swung out for the shortest possible changeover times between carcass, frame, and line boring operations. - Clamping arms for the clamping carriage are designed for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. - 1 set of dowel drill bits: - 5 tungsten carbide dowel drill bits, Ø 8 x 77 mm, right-hand - 4 tungsten carbide dowel drill bits, Ø 8 x 77 mm, left-hand Base machine Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" as above. Additional features: - Suction funnel, dust-tested, Ø 120 mm - 1 set for line boring in system

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 690924, Connected load: 380V 1.84kW Speed: 2840 rpm Hodpjh U Damofx Ag Eenp Number of spindles: 21 units, 32 mm pitch Spindle spacing: 640 mm Spindle rotation direction: 11x right-hand, 10x left-hand, M10 thread 2x safety clamps Pneumatic foot switch Table size: 880 x 400 mm 1x side stop with 2 flip stops 1x base stop 1x mitre stop Unfortunately, we are unable to respond to inquiries without complete contact details.

Būklė: naujas, Gamybos metai: 2025, bendras ilgis: 1 600 mm, bendras plotis: 2 200 mm, bendras aukštis: 2 350 mm, bendras svoris: 250 kg, įvesties srovės tipas: trifazis, darbinis plotis: 1 400 mm, Paint booth, spray wall, extraction unit TQN1414 With right- or left-side discharge. Working dimensions (mm): 1400 (W) x 1400 (H) x 800 (D) Overall dimensions (mm): 1600 (W) x 2350 (H) x 1250 (D) SPECIFICATION: Hnsdpfxjd S N I No Ag Esp • Fan output: 1.5 kW, • Capacity: 6,500 m³/h, • 2 x 100% polyester filters • Filtration efficiency of 99.9%, • IP 66 control panel, • Automatic filter cleaning, • Hermetically sealed lighting, IP 65, • Paint tank Cabin is available immediately (in stock) CHOOSE BUMEX SP. Z O.O. Very high-quality machines among those offered on the market. Professional consultation and service. Warranty. Warranty and post-warranty service. Comprehensive technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products are EC-certified. We offer our own transport – pricing is determined for each specific offer. We issue invoices with VAT shown. Short delivery times! Possibility to order machines in various, customised configurations and dimensions! Please contact us.

Būklė: labai geros būklės (naudotas), Buderus 455 kW. Alyva kūrenama avarinė šildymo sistema. Žematemperatūris katilas, taip pat gali būti naudojamas su biogazo degikliu. Hodpfex U Exujx Ag Esnp

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun Hnsdpfx Ageqlck Ne Ejp 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Milling spindle, non-interchangeable: 30 mm Clamping height: 140 mm Height adjustment: 140 mm Extraction ports: 2 x ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 light grey and RAL 5000 violet blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed, double-sided tilting spindle for a tilt range of -5° to +45.5° Operation via handwheel at the base of the machine frame Height and tilt adjustment via handwheels Analog dials for height and tilt adjustment 4 speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning system Electronic speed display Push buttons for spindle start and stop Forward and reverse operation Quick-change cutter clamping system Finely planed cast iron table Controls clearly visible and easily accessible at the lower machine body Fence 215 with total adjustment via handwheel, incl. multiplex fence faces Machine socket outlet Lockable main switch Mechanical motor brake Hnedpfx Agsgz Sifo Eep Cutter guard and pressure device GAMMA V 1629 Curved cutting fence 1639 Tapoa CE certified GS tested

Būklė: naujas, Gamybos metai: 2026, Dviejų eilių ir furnitūros gręžimo staklės pagal SISTEMĄ 32. Eilinio gręžimo staklės su 2 gręžimo sijomis, kiekvienoje po 25 preciziškas gręžimo ašis. Trumpas pristatymas: • Eilinis skylučių gręžimas pagal 32 mm sistemą • 50 (2 x 25) gręžiamų skylių vienu gręžimo ciklu Hjdjdxz Ntopfx Ag Esnp • Gręžimo gilumo kompensacija skirtingam skylės gyliui • Tvirta precizinė gręžimo pavarų dėžė iš GANNOMAT • Eilės baldinių jungčių ir puodelinių lankstų gręžimas (pasirinktinai) • Pasirinktinai trečias gręžimo agregatas

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, HOMAG WEEKE OPTIMAT ABD 150 yra aukštos našumo CNC staklės, skirtos tiksliam gręžimui, kaiščių įdėjimui ir furnitūros montavimui baldų gamyboje bei plokščių apdirbime. Hjdpfsym Nvtex Ag Ejnp Ši įranga idealiai tinka baldžių dirbtuvėms, baldų gamintojams ir pramoniniams medienos apdirbimo cechams, reikalaujantiems tikslaus ir efektyvaus automatizuoto apdirbimo. Įrenginio savybės: CNC valdomas gręžimo ir įdėjimo modulis Integruota klijų ir kaiščių įdėjimo sistema Tvirta pramoninė konstrukcija Kompaktiški matmenys Paprastas valdymo pultas Atitinka CE reikalavimus Staklės reguliariai prižiūrėtos ir paruoštos darbui.

Būklė: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical data: Edge thickness, coil material: 0.4 - 3 mm (material-dependent) Edge thickness, strip material: 0.4 - 8 mm (material-dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (restrictions possible with certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: - Motorized pressure bridge adjustment - Extendable XL workpiece support, spacing 600 mm - Three-color LED signal light at infeed - Motorized adjustment of infeed fence - Long infeed fence, 1252 mm - I-Tronic package - Edge Control PPC 322 W control system - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy-saving mode Hnsdpfxey Nuf To Ag Ejp - Prepared for RETURN connection (third-party products) - Guide system BS 501; ensures right-angled feeding for edge-banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm - Jointing cutter unit FG201 with 2 milling heads, 64 mm high - Edge feeding unit MG 301 - GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via metering sleeve and sensor nozzle for compensation of panel tolerances - NC axis for height adjustment - Swivels 90° for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional PUR adhesive processing; the vacuum pump extracts the reaction agent (water molecules) from the PUR and thus the adhesive can remain in the system without curing. The vacuum pump operates independently of the machine’s power supply and automatically compensates any vacuum loss. - Full control over PUR! - Pressure section DW 301 with motorized NC axis; first roller driven with pneumatic immersion control, 2 conical follow-up rollers - GM301 spray application unit after pressure section for high-gloss edges (lubricant) - KA 501 pneumatic end trimming unit (60 mm) - Extraction hoods for end trimming unit - Multifunctional milling unit FR301 MOT6 - Shelf program - Form trimming unit FF 301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Flat scraper FK702 - Complete separating and cleaning agent spray system - GM 301 spray application unit after pressure section (for high-gloss edges) - Buffing unit SW 501 Piping above the machine is not included in the scope of delivery Availability: short-term Stock location: Hochheim

Būklė: naujas, Gamybos metai: 2015, Factory-new machine, only used for testing purposes, machine condition is impeccable. TECHNICAL DESCRIPTION The DIGIT MAGGI through-feed boring machine is an automatic multi-head through-feed drilling machine equipped with 2 horizontal heads and 6 vertical heads, designed for high-volume production. TECHNICAL DATA - Number of horizontal heads: 2 - Number of vertical heads: 6 - Minimum distance between vertical heads: 165 mm - Minimum distance between horizontal heads: 320 mm - Spindle pitch: 32 mm - Number of spindles per horizontal head (left red – right black): 23 (11 – 12) - Number of spindles per vertical head (left red – right black): 11 (5 – 6) Hnjdoxd Ruwepfx Ag Esp - Maximum vertical boring depth: 55 mm - Maximum horizontal boring depth: 65 mm - Maximum workpiece dimensions: 2800 x 870 x 50 mm - Minimum workpiece dimensions: 250 x 150 x 12 mm - Number of motors: 12 - Motor power per horizontal head: 2 HP (1.5 kW) - Motor power per vertical head: 1.5 HP (1.1 kW) - Number of clamps: 10 - Infeed device feed rate: 57 m/min - Operating air pressure: 6-8 bar - Standard air consumption: 60 l/cycle - Maximum clamp height from the work table: 75 mm - Overall dimensions: 4150 x 1600 x 1800 mm - Worktable height: 950 mm - Package dimensions: 4300 x 1950 x 1900 mm (h)