Linijinės gręžimo mašinos

Gannomat Vantage

Būklė: naujas, Gamybos metai: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander including Intermediate Paint Sanding Configuration Kwodpfx Agsk Dpp Sjfow Special Price for Showroom Model - Trade Fair Machine - - Robust, space-saving wide belt sander for the highest demands - Consistent working height thanks to top section adjustment - Working width: 1350 mm - Top sanding, equipped with 2 sanding units - Grooved rubber contact roller with proven hardness - Stepless height adjustment of the contact roller according to a sanding grit scale - Electric raising/lowering of the contact roller according to selected aggregate - Electronically controlled segmented sanding pad - Complete sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at infeed - Rubber-coated pressure roller between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized fine height adjustment with digital display - Pneumatic belt tensioning, control, and oscillation Compressed air consumption approx. 2 l/min - Optimum safety due to automatic instant stop with disc brake in the event of belt breakage, etc. - Workpiece feed: 2.2 kW with transport belt and drive roller - Vacuum system for the entire worktable with additional 200 mm perforation for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece thickness overrun protection with instant feed stop and automatic lift - Stepless regulation of material removal - Electronic feed speed control at the operator panel, stepless 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor belt control - Workpiece support with roller at infeed and outfeed - Enormatic: Fully automated quick setup and feed release - Eco energy-saving mode - Fault diagnosis - Pass-through height 210 mm up to 18.5 kW - Sanding belt dimensions: 1350 x 2000 mm Perfect - Features: High quality, swiveling plexiglass control panel - 10" Touch Screen - Industry controller - Automatic pressure regulation and memory function of the sanding pad segments - Electronic compensation for sanding belt grit size - Job and operating hour counters Lacquer Configuration - Stepless adjustment of the sanding belt speed on the 2nd aggregate - Nozzles for automatic sanding belt cleaning on the 2nd aggregate - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Fold-down outfeed table extension (without plate) C10) LED package ASB5+AS3) ECS workpiece air blast system with fan Location: 54634 Bitburg - Immediately available -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced milling unit anchored to the worktable Especially sturdy design Smooth operation due to precision assemblies and high own weight Standard with forward/reverse rotation and electronic interlock during direction change 5 speeds from 3000 to 10000 rpm Speed adjustment is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron worktable for lasting precision Easy handling thanks to controls and speed indicator on the machine front Milling fence with fine adjustment and aluminium fence jaws as standard High-performance industrial motors Equipment details: Milling fence Milling fence adjustable with crank/handwheel from the front panel With digital readout Quick-change spindle MK 4 quick-change spindle system standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved milling guard Forward/reverse spindle rotation MK 4 quick-change spindle Milling fence adjustable with crank/handwheel from the front panel with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Kwjdsdqzcxjpfx Agfjw Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length Ø 30-35 mm: 140 mm Usable spindle length Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool diameter for profiling: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle diameter at fence: 1 x 120 mm Extraction nozzle diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -

Gamybos metai: 1998, būklė: paruoštas naudoti (naudotas), A multi-blade saw from Construzioni Macchine Legno s.r.l. is available. Saw blade diameter min./max.: 250mm/360mm, saw blade bore min./max.: 70mm/95mm, cutting width: 320mm, cutting height adjustable/fixed: 90mm/120mm, weight: approx. 3000kg. An on-site inspection is possible. Kjdewv Umwopfx Agfeww

Būklė: labai geros būklės (naudotas), GANTRY LOADER with DOUBLE LOADING STATION Vacuum system (with its pump) No. 4 vertical columns supporting the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley to which horizontal arms are attached No. 2 adjustable horizontal metal arms with vacuum suction cups No. 2 floor-mounted rollers for feeding panel stacks into the Loader No. 1 motorized roller table (delivering panels to the Unloader), with additional cross motorized conveyor belts (at 90°). Dimensions approx. 7,232 mm Separate electrical and control panel OMRON electronic controls Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Minimum/maximum board thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1,200 x 3,200 mm Installed power: 23.3 kW Ksdjd Rg Dpspfx Agfoww

Būklė: geras (naudotas), Gamybos metai: 2006, Parduodu automatinį pneumatinį Weinig Grecon Dimter Opticut 200 Elite, pagamintas 2006 m. Kwsdpfxjxtxi Ie Agfsw Variklio galia: 7,5 kW Automatinis įvado stalas 4,10 m (praeinantis sistema) Automatinis išvado stalas 6 išmetimo įtaisai dešiniajame išvado stale. Optimizavimas su automatiniu defektų aptikimu ir automatiniu pjovimo schemų programavimu. Galima iš karto. CE įranga. Dokumentai pridėti.

Būklė: naujas, Gamybos metai: 2026, CNC gręžimo ir kaiščių įstatymo automatas, skirtas visiškai automatiniam gręžimui, klijavimui ir kaiščių įstatymui. Gręžimo ir kaiščių apdirbimo centras, pasižymintis kompaktiškumu, efektyvumu, kokybe ir lankstumu. Trumpas pristatymas: • Universalus CNC valdomas gręžimo ir kaiščių įstatymo įrenginys • Klijų padavimo kontrolė per GIC • Uždara klijų sistema • Tinka plokščių ir masyvo apdirbimui Kwsdpedx R Dfjfx Agfjw • Papildomos horizontalios ir vertikalios gręžimo ašys kaip pasirinkimas • Atlaisvina CNC apdirbimo centrus • Optimalus priedas nesting staklėms

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, Loading, unloading, drive-on, entry, mobile ramp 10-ton ramp, 2 m width TM-GROUP Ksdpfx Agjpk Auqefoww THE BEST CHOICE ON THE MARKET ✅ Specification: - Manufacturer: TM-GROUP - Maximum load capacity: 10 tons - Internal ramp width: 2000 mm - Ramp railings on both sides - Ramp rollers for repositioning the ramp - Central ramp handle for forklift transport - Adjustable slope and ramp flap height - Movable ramp components with grease points - Ramp winch also included - Custom ramp dimensions available for an additional charge - Electrically powered height adjustment available (optional) - ! ATTENTION: CHOOSE THE TAPER WIDTH BASED ON THE MINIMUM USABLE NOTCH! ✅ Entrance Grating: Galvanized grating with anti-slip grooves. Safe and stable surface. Forklift and pedestrian traffic have the best possible grip and stability. The grating is galvanized and can be dismantled. ✅ Forklift Handle – installable on both sides: Convenient and quick attachment for forklift transport allows the ramp to be moved in any direction. The specially designed handle enables maneuvering even in confined spaces. ✅ Chain for connection to a truck, wagon, or fixed warehouse ramp: Robust steel chain is another advantage of our ramp, providing extra security to prevent shifting during loading and unloading. ✅ Sturdy Side Railings: Protective railings with the option to remove and install a frame/roof (roof is optional). ✅ Electric ramp height control: Smooth electro-hydraulic drive with high-performance pump. The pump requires 230V and can therefore be operated from a standard socket. ✅ Dual-action hand pump: Hydraulic pump for height adjustment in case there is no connection to the electro-hydraulic power supply – double-sided lift. This is an excellent solution for operations under all conditions. ⭐️ We offer the following versions: ⭐️ - Drive-on ramp widths in 1900 – 2000 mm, 2150 mm and 2500 mm PREMIUM. - Mobile ramps with load capacities of 10 tons, 15 tons, 20 tons, and 25 tons PREMIUM. - Thickness of drive-on gratings 3 – 5 cm. - Colors: red, blue, and black. - Mobile ramp with tarpaulin.

Būklė: naujas, Gamybos metai: 2026, Dviejų eilių ir furnitūros gręžimo staklės pagal SISTEMĄ 32. Kjdpfxedxz Nto Agfsww Eilinio gręžimo staklės su 2 gręžimo sijomis, kiekvienoje po 25 preciziškas gręžimo ašis. Trumpas pristatymas: • Eilinis skylučių gręžimas pagal 32 mm sistemą • 50 (2 x 25) gręžiamų skylių vienu gręžimo ciklu • Gręžimo gilumo kompensacija skirtingam skylės gyliui • Tvirta precizinė gręžimo pavarų dėžė iš GANNOMAT • Eilės baldinių jungčių ir puodelinių lankstų gręžimas (pasirinktinai) • Pasirinktinai trečias gręžimo agregatas

Būklė: naudotas, Länge: 1,5 m Breite: 1,5 m Kedpfx Aohhpbcsgfsww Stamm-Scanner Elinova 768.

Gamybos metai: 2016, būklė: labai geros būklės (naudotas), Böhl - Wrapping Machine Type JUNIOR/S-450 VA Product Dimensions: Length: 600/800 mm maximum 5800 mm Kedpfslcc U Esx Agfsww Width: 15 mm maximum 220 mm Height: 15 mm maximum 120 mm Weight maximum 30 kg/meter The maximum cross-sectional diagonal of the previous customer was 220 mm. The specified weights are only possible with a powered, customer-provided roller conveyor. Technical Data: Electrical Control: Siemens S7 with TP Control Voltage: 24 V DC Operating Voltage: 3 x 400 V/50 Hz, N, PE Pneumatics: FESTO Compressed Air: 6 bar, dried, filtered, and oil-free Air Consumption: approximately 20 NL/cycle Maximum Infeed Pressure: 8 bar Noise Emission Level: less than 80 db/A Machine see layout drawing Operating Side: right in conveying direction Control Cabinet: left, fixed to the machine Paint Machine 7032, grey Black-yellow Roller Conveyor Height: 900mm