Vibro konvejeris

Vibro conveyor Vibro

Būklė: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Cjdpfxsw Sy T Ho Aahegp Location: Nattheim

Būklė: labai geros būklės (naudotas), Line for door frames (casings), for cutting, milling of strike plates, and inserting hinges (ANUBA) comprising: X10030A) Discharge conveyor X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS" - 45° left-side cut – Drilling - 90° cut - 45° right-side cut – Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" model MULTITEC Cjdpfxsqwycls Aahjgp X10030F) Strike plate milling machine "MASTERWOOD" model Teknomat 3000

Būklė: naudotas, Gamybos metai: 2014, Drive power: 3 kW Operating pressure: 7 bar Air delivery (flow rate): up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Chicago Pneumatic CPVR15 CE screw compressor – Year of manufacture: 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications—this compressor reliably supplies the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Application: workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: Codeh A Sfdspfx Aahjgp 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigerant dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - oil-water separator Technical data taken from publicly available sources.

Būklė: naujas, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Cjded H Sc Ejpfx Aahogp Gesamtmotorleistung: 77,12 kW Motorleistung 1. Aggregat: 22 kW Motorleistung 2. Aggregat: 30 kW Motorleistung 3. Aggregat: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Betriebsdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportabmessungen: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Būklė: geras (naudotas), WEBER pipe extrusion line including: WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Cedpfx Asvryhyeahsgp Battenfeld V125

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, We offer for sale a complete multi-point automatic steel wire welding line by SCHLATTER. We have three fully operational production lines available. Automatic machines for the production of cross wires (so-called straighteners with cut-off units) are also available. Additionally, we have a wide range of individual spot welders for steel wire. Cgsdpfx Astvpiljahsp

Būklė: naudotas, Gamybos metai: 2000, Velenų skaičius: 5 vnt. Darbinis plotis: 230 mm Csdpfxowztw So Aahegp Obliavimo aukštis: 160 mm Padavimo variklis: 4 kW Padavimo greitis: 5–24 m/min. Weinig Unimat 23E keturpusio obliavimo ir profiliavimo automatas, skirtas medienai obliuoti ir profiliuoti iš visų keturių pusių, turintis mobilų veleną automatiniam reguliavimui bei griovelių stalą (pasirinktinai be griovelių stalo) trumpiems ir lenktiems ruošiniams bei ilgą lyginimo stalą. Papildomai: Pakeitimas į įprastą lygų stalą pagal užklausą. Velenas 1: Apačioje / 40 mm / 5,5 kW Velenas 2: Dešinėje / 40 mm / 7,5 kW Velenas 3: Kairėje / 40 mm / Bendras variklis su 2-uoju velenu Velenas 4: Viršuje / 40 mm / 7,5 kW Velenas 5: Apačioje / 40 mm / 5,5 kW

Būklė: reikia remonto (naudotas), Gamybos metai: 1999, Funkcionalumas: neveikiantis, Storti prizmės staklės 4x35 AG Cgsdpelxqk Rsfx Aahsp Volelio įvadas Išėjimas Valdymo pultas Mašinos restauravimui

Būklė: labai geros būklės (naudotas), pjovimo aukštis (maks.): 120 mm, pjovimo plotis (maks.): 700 mm, Right-hand machine, machine no. 188 hydraulic width adjustment, electrically adjustable Csdov Raqxopfx Aahsgp Infinitely variable feed rate adjustment 0 - 80 m/min Drive motor 37 kW with V-belt pulley and motor tensioning rail Various saw heads, spacer rings, and saw blades Infeed table with individual stands Fixed outfeed table The machine has been completely refurbished and is in top condition.

Gamybos metai: 1977, būklė: visiškai atnaujintas (naudotas), I am selling a Rapid DGS double mitre saw, year 1977. Swivelling heads. Drilling heads on each side at the front included. In very good condition. Available immediately. Cgjdod N Rb Dopfx Aahop