Ganner Protec pirkti naudotą (56)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Ganner
Mažas skelbimas
Vokietija
1 104 km
Kaištinių gręžimų staklės Delta Star Tipas 80
GannerDelta Star Typ 80
Skambinti
Būklė: naudotas, Gamybos metai: 1985, Naudota mašina
Pagaminimo metai: 1985
Įranga ir techniniai duomenys:
- Konstrukciniam gręžimui horizontaliai ir vertikaliai
Ncsdpfx Aowka Hfefaju
- Vertikalioms eilių skylėms su 32 mm žingsniu
- Vertikalus gręžimo agregatas su dvigubomis veleno galvomis, laisvai reguliuojamomis ant indekso veleno
- 1,5 kW variklis su 1400 aps./min
- 1,5 kW variklis su 2800 aps./min
- Gręžimo galvos su pneumatiniais pakėlėjais
- Pneumatiniai medžiagos spaustuvai
- Praėjimo plotis apie 850 mm
- Komplekte įvairūs sustojimai ir grąžtai
Prieinamumas: iš karto
Vieta: Röllbach
Mažas skelbimas
Vokietija
1 104 km
Ganner 192 puoduko lanksto gręžimo ir įspaudimo staklės
Ganner192
Skambinti
Būklė: naudotas, Gamybos metai: 1986, Naudota mašina
Metai: 1986
Įranga ir techniniai duomenys:
- su skylučių eilės gręžimo galva su 7 velenais ir pozicionavimo kaiščiais
- atstumas 32 mm
- su BLUM lankstų gręžimo galva
Ncjdpfx Asyncppefaju
- su Hettich lankstų gręžimo galva
- su atitinkamomis presavimo matricomis
- Variklis: 400 V, 0,75 kW, 2800 sūkių/min
- su atraminėmis lazdomis
Prieinamumas: iš karto
Sandėlio vieta: 63934 Röllbach
Mažas skelbimas
Vokietija
1 104 km
Kaiščių gręžimo staklės Ganner Optima 21
GannerOptima 21
Skambinti
Būklė: naudotas, Gamybos metai: 1997, Naudota mašina
Pagaminimo metai: 1997
Įranga ir techniniai duomenys:
- Grąžtų velenų skaičius: 21 vnt., 32 mm žingsnis
- Gręžimo kryptis: iš apačios ir iš priekio
- Pasukimas: 0-90° rankiniu ratuku
- Pneumatiniai medžiagos spaustuvai: 3 vnt.
- Praėjimas: maks. 100 mm aukštyje ir maks. 640 mm pločio
- Variklis: 1,5 kW
- Ištraukimo skersmuo: 120 mm
Nedpfxjy Tczke Afaecu
- Įskaitant daugybę ribotuvų (žr. nuotraukas)
Prieinamumas: iškart
Sandėlio vieta: 63934 Röllbach
Mažas skelbimas
Vokietija
1 104 km
Skylių gręžimo staklės
GannerRB 107
Skambinti
Būklė: naudotas, Naudota mašina
Nedpfew I Unwex Afaecu
Naudota eilinė gręžimo mašina Ganner RB 107
Serijos Nr.: 121627
Variklio galia: 1,5 kW
Variklio apsukos: 2800 aps./min.
1 gręžimo balkis su 26 velenomis, ašių atstumas 32 mm
3 prispaudėjai
1 kojinis jungiklis
Prieinamumas: greitai
Vieta: Röllbach
Mažas skelbimas
Vokietija
1 104 km
Kaiščių gręžimo staklės
GannerOptima 21
Skambinti
Būklė: naudotas, Gamybos metai: 1997, Naudota mašina
Pagaminimo metai: 1997
Būklė: prižiūrėta
Įranga ir techniniai duomenys:
- Gręžimo velenų skaičius: 21 vnt., 32 mm žingsniu
- Gręžimo kryptis: iš apačios ir iš priekinės dalies
- Pasukimas: 0-90 laipsnių rankiniu ratuku
- Pneumatiniai medžiagos spaustuvai: 3 vnt.
- Praėjimas: maks. 100 mm aukščio, maks. 640 mm pločio
Ncjdpfjxwz Ihox Afaeu
- Variklis: 1,5 kW
- Nusiurbimo diametras: 120 mm
- Įskaičiuota daugybė atramų (žr. nuotraukas)
Prieinamumas: nedelsiant
Sandėliavimo vieta: Röllbach
Mažas skelbimas
Vokietija
1 104 km
Rėmo kaiščių gręžimo staklės
GannerLBM Junior 320
Skambinti
Būklė: naudotas, Gamybos metai: 1993, Naudota mašina
Pagaminimo metai: 1993
Įranga ir techniniai duomenys:
2 žandikaulių griebtuvas iki 20 mm kotelio skersmens
Pneumatinis padėties reguliavimas
2 lygiais 0-100 mm
Maks. gręžimo gylis 150 mm
Precizinė rastro linija 12 mm
Centrinis fiksavimas ir skersinis reguliavimas
2 pneumatiniai saugos spaudimo cilindrai
Variklis 1,5 kW
Apsisukimai 2800 aps./min.
Ilginė gręžimo įranga su 2 programiniais kumščiais, nuleidžiama
Mašinos svoris apie 310 kg
Mašinos dydis (PxGxA) 1100 x 1100 x 1500 mm
(be atstojimo)
Prieinamumas: iš karto
Ncodpfxow I Uy Te Afasu
Vieta: Röllbach
Mažas skelbimas
Vokietija
1 106 km
Kūno presas
GannerConcept 70 ECO
Skambinti
Gamybos metai: 2025, būklė: naujas, New Machine
Year of manufacture: 2025
Features and technical data:
Complete in standard configuration with:
- Robust, torsion-resistant steel frame, manufactured as a welded and bolted structure
- Top lamellar pressure beam with 6 elements, side lamellar pressure beam with 5 elements
- Lamellar pressure beams with field-proven tolerance compensation (Ganner system) for tightly clamped carcass joints
- Counterpressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels
- Continuous pressing area with a height of 95 mm at the lower vertical pressure beam
- Electromotive adjustment of the two pressure beams via precision trapezoidal threaded spindles (with enhanced lead and runout accuracy) and high-performance slide nuts with grease reservoir
- Pressing is performed electromotively, using 2 separate worm gear motors (2 x 0.75 kW each)
- The pressure force of the beams can be steplessly adjusted electronically with 2 potentiometers and is regulated via frequency converters, ensuring completely wear-free pressure control
- Pressing force for horizontal pressure beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg)
- Pressing force for vertical pressure beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg)
- Pressing and adjustment speed of the pressure beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/sec
- Jog function for precise positioning of both pressure beams, e.g., for low pressing forces, drawers, and carcasses at 45°
- Simple operation via 6 separate push buttons; 8 movement cycles can be selected via control panel
- Freely adjustable press time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of the two pressure beams
- Re-press function to increase or decrease pressing force during the pressing process
- Working height/loading height: 300 mm
- Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm
Including surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams. Press speed: 5 / 10 / 25 mm/sec and rapid traverse speed: 50 mm/sec. Sensors can be disabled for pressing special components.
Including set of machine feet for 500 mm working height
Ncedpfx Afsw Nafkeasu
Location: Flörsheim
Availability: Short-term
Mažas skelbimas
Vokietija
1 106 km
Kaiščių klijavimo ir įkalimo įrenginys
GannerHOKUTECH Dübel Jet inkl. Leim Jet
Skambinti
Gamybos metai: 2025, būklė: naujas, New machine
Nodpjwx Aadofx Afascu
Year of manufacture: 2025
Features and technical data:
Standard equipment:
- Robust machine base
- Dowel system for: dowel diameter 8 mm
Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm)
Dowel projection 12 mm (factory setting, adjustable from 7 to 20 mm)
- Recoil-free dispensing gun
- Vibratory feeder for dowel transport
- Dowel diameter and length control with Auto-DL-Select system
- Water supply system for pre-glued dowels
Water tank (stainless steel container 7.5 l)
Closed water system with 6 bar water pressure and spray nozzle
- Electronic control featuring: main power switch On / Off
Program selector switch Water / Water + Injection
Potentiometer for dowel feed via vibratory feeder
Potentiometer for water injection volume
Indicator light for minimum water level in water tank
- Chassis
- Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz
HoKuTech DowelJet with option for through-hole processing:
1 unit
HoKuTech | DowelJet with expansion kit for GlueJet
incl. mounting devices for integration/connection with DowelJet
incl. height-adjustable suspension for glue hose/
including:
1 HoKuTech | GlueJet
Glue dosing unit for through-hole processing
Suitable for PVAc glues up to 75,000 mPas viscosity
Incl. dowel nozzle for Ø 8 mm, pointed nozzle
Location: Flörsheim
Availability: Immediately
Mažas skelbimas
Vokietija
1 153 km
Skylių gręžimo staklės
GannerCompact 30
Skambinti
Būklė: naudotas, Used machine
Pre-owned line boring machine Ganner Compact 30
Features and technical data:
- 2 drilling beams, each with 15 spindles
- 32 mm pitch
Nsdpfxewhuh So Afaocu
- Drilling unit position adjustment: 0 - 650 mm
- Minimum distance between hole rows: 190 mm
- Spindle speed: 2800 rpm
- Motor power: 2 x 0.75 kW
- Maximum clamping height for workpieces: 70 mm
- Working height: 850 mm
- Compressed air connection: 6 bar
Availability: by agreement
Location: Solingen
Mažas skelbimas
Nattheim
1 177 km
Gręžimo ir (arba) gilzių įterpimo mašina
GannerIndex 180 Pro
Skambinti
Būklė: naudotas, Gamybos metai: 2018, 1 unit CNC-controlled drilling, gluing and dowel inserting machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz, complete in standard configuration with:
- Linear guide support consisting of: 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3,000/5,000/8,000 rpm)
1 pc. reinforced blow-out, gluing and dowel inserting station for 8 mm diameter dowels, dowel length 30 mm
- Fully automatic, electronically controlled centralized lubrication
- X-axis NC controlled, with working length 1,300 mm, max. travel speed 78 m/min
- Z-axis, position programmable over support table 5-40 mm, with option for NC-controlled Z-axis
- Dowel insertion projection 7-20 mm, programmable with option of NC-controlled Y-axis
Ncodpfx Asxwaz Hjfaju
Drilling depth from 0-35 mm (with drill length total 70 mm) is automatically set with dowel protrusion
- Enclosed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas
- Glue quantity steplessly adjustable via operator software
- Selector switch GLUE/WATER for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 liters of water
- Indicator lamp for glue level in glue container
- 1 pc. side fence left, 1 pc. side fence right, and 1 pc. center fence (all removable)
- 4 pcs. start buttons for individual operation with 1-4 workpieces
- 4 pcs. pneumatic angled clamping cylinders 10°, for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm
- 1 pc. extraction funnel, connection diameter 80 mm
- 1 pc. TCT control with: integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" resistive TFT industrial touchscreen display, 1024 x 768 resolution, 2 GHz CPU, 256 MB RAM, 2x network interfaces, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7
- Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensioning, automatic workpiece mirroring and process optimization, 4 work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point shifting, programmable job lists, plain text error diagnosis
OPTIONS:
- 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle
- 4 additional vertical angled clamping cylinders 10° with bracket (total 8 clamping cylinders)
- Surcharge for machine bed length 1,800 mm with working length 1,800 mm
- Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm (Standard working length not reduced)
- 1 NC-controlled Y-axis, with ballscrew and dynamic travel speed 300 mm/sec. Via software, programmable dowel insertion projection 7-30 mm and drilling depth 0-42 mm (with drill length total 77 mm) for vertical drilling unit from above, Y-axis position 5-42 mm
- Surcharge for NC-controlled Y-axis position 5-62 mm instead of 5-42 mm
- Surcharge for: 1 vertical drilling unit from above, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm, Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced)
- 1 NC-controlled Z-axis, with K
Mažas skelbimas
Nattheim
1 177 km
Kaiščių skylių gręžimo mašina
GannerDB 21
Skambinti
Būklė: naudotas, Gamybos metai: 2024, Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" – complete in standard configuration, equipped with:
Nedpfx Ajxnlflefascu
- Fully automatic electronic control with pulse operation via foot pedal: clamping – drilling – releasing; electrical intermittent operation.
- Automatic retraction of the drilling unit upon reaching the preset drilling depth.
- Automatic extension of drilling depth for face-end drilling. This eliminates the need to manually adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, drilling depth flat face 14 mm, drilling depth end face 24 mm).
- 1 drilling beam with 21 spindles, 32 mm spacing, 1.5 kW motor (drilling feed 0–70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit replacement.
- Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder.
- 1 clamping carriage adjustable along the Y-axis, with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height.
Ideal positioning system comprising:
- 1 positioning rail, 1800 mm, for shelf drilling (aluminum profile 40 x 40 mm) with 3 flip stops
- With quick-change system, easily convertible from right to left for mirrored shelf drilling in carcass construction. Also suitable for line boring in System 32.
- Side stops and position settings, as well as the drilling height adjustment over the support table, using mechanical digital counters.
- Side stops are easily swung out for the shortest possible changeover times between carcass, frame, and line boring operations.
- Clamping arms for the clamping carriage are designed for line boring positions up to max. 300 mm.
- Ideal three-stage tooling system.
- 1 set of dowel drill bits:
- 5 tungsten carbide dowel drill bits, Ø 8 x 77 mm, right-hand
- 4 tungsten carbide dowel drill bits, Ø 8 x 77 mm, left-hand
Base machine Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" as above.
Additional features:
- Suction funnel, dust-tested, Ø 120 mm
- 1 set for line boring in system
Mažas skelbimas
Austrija
1 225 km
Kaiščių gręžimo ir įkalimo staklės Ganner Index Logic
GannerIndex Logic 130 Typ 471L130
Skambinti
Būklė: naudotas, Gamybos metai: 2014, Used machine
Year of manufacture: 2014
Features and technical data:
Completely in standard configuration with:
- Support with linear guide consisting of:
1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm
Tool speed selectable via operator software (3000/5000/8000 rpm)
1 pc. blow-off, gluing, and dowel driving station for dowels Ø 8 mm, dowel length 25-50 mm
- Fully automatic, electronically controlled central lubrication
- X-axis NC controlled, with working length 1300 mm, travel speed max. 105 m/min
- Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm
- Dowel insertion projection adjustable from 7-20 mm via mechanical digital counter, drilling depth from 0-35 mm (with drill length GL 70 mm) is automatically set with insertion projection
- Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas
- Glue quantity continuously adjustable via operator software
- Selector switch GLUE/WATER for rinsing the glue system, each with:
1 stainless steel tank for 7.5 kg glue and 7.5 l water
- Control lamp for glue residue indication in the glue tank
- 1 pc. side stop left, 1 pc. side stop right, and 1 pc. center stop (all removable)
- 4 pcs. start buttons for individual operation with 1-4 workpieces
- 4 pcs. pneumatic angular clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm
- 1 pc. suction funnel, connection Ø 80 mm
1 pc. TCT control with:
Ncodpjy Ih Skofx Afaeu
Built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C,
TFT industrial display 15" capacitive touchscreen, operating system: WINDOWS 7
- Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and work sequence optimization, 4 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, error diagnostics in plain text
Options:
1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle
1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel driving station (programmable from 5-40 mm), travel speed max. 30 mm/sec
1 single-spindle vertical drilling unit, drilling from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation e.g. for Häfele Minifix)
4 vertical angular clamping cylinders 10° with mounting, additionally,
1 keyboard with mounting
Availability: as agreed; currently being overhauled at Ganner factory
Location: Austria
Mažas skelbimas
Nattheim
1 177 km
Kaiščių gręžimo staklės
GannerOptima 21/510
Skambinti
Būklė: naudotas, Gamybos metai: 1996, Gręžimo galvutė su 21 velenu, žingsnis 32 mm Darbinis plotis: 640 mm Portalinis praėjimas: apie 750 mm Gręžimo eiga: 100 mm Gręžimo bloko padėties reguliavimas: 0-45 mm Skylių eilės padėties reguliavimas: 0-300 mm Veleno apsisukimų dažnis: 2800 aps./min Grąžto kotelio skersmuo: 10 mm Ruošinio spaudimo aukštis: maks. 100 mm Variklis: 1,5 kW Darbo aukštis: 850 mm Suspausto oro jungtis: 6 bar Svoris: apie 400 kg
Nedpfxoy Dd I Hj Afascu
Sandėliavimo vieta: Nattheim
Mažas skelbimas
Nattheim
1 177 km
Kaiščių skylių gręžimo mašina
GannerDB 21
Skambinti
Būklė: naudotas, Gamybos metai: 2014, Complete in standard configuration with: – Fully automatic electronic control with foot pedal for clamping, drilling, releasing, and electric intermittent operation; – Automatic return of the drilling unit after reaching the set drilling depth; – Automatic extension of drilling depth for end-grain drilling saves re-adjustment of the drilling depth from flat-side to end-grain applications (+10 mm, e.g., with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end-grain 24 mm); – 1 boring beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0–70 mm) including 21 quick-change chucks (Ganner system) for fast drill bit changes; – Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder; – 1 clamping carrier, movable along the Y-axis, with 3 pneumatic clamping cylinders for workpiece heights up to max. 80 mm; – Ideal stop system consisting of: – 1 stop ruler 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop stops, quick-change system, easily switchable from right to left stop side for mirror-image drilling of shelves in carcass constructions, also suitable for line boring in 32 mm system; – Side stops and position settings, as well as drilling height adjustment via the support table, with mechanical digital counters; – Side stops can be easily swung away for shortest setup times when switching from carcass, to frame, and line boring operations; – Clamping arms on the clamping carrier designed for line boring positions up to max. 300 mm; – Ideal three-stage... (weight approx. 400 kg gross, approx. 350 kg net). Dimensions (L × W × H): 1.35 m × 1.25 m × 1.40 m. Equipment: 1 pcs. extraction funnel, dust-tested, ø 120 mm; 1 set for line boring in system 32, complete with: 1 base ruler 1050 mm (aluminum profile 40x40 mm), 1 template for line boring; 1 frame doweling device complete with: 1 middle stop, 1 stop rod round 850 mm long, 2 stops. Storage location: Nattheim.
Ncodpfx Afeyyxkhjaeu
Mažas skelbimas
Bitburg
1 305 km
Kūno presas
Ganner - sofort verfügbar -Concept 70 Eco
Skambinti
Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Technical Data:
Lamella carcass press from our showroom;
Working range: width from 150 - 2,550 mm, height from 150 - 1,400 mm; depth from 150 - 700 mm;
Variable pressing force adjustment of the side press beam: 300/700/1100/1400/1800/2200 dN(kg);
Variable pressing force adjustment of the top press beam: 500/800/1200/1500/1900/2200 dN(kg);
Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm.
Nsdpfxsb Eln Dj Afaecu
The machine is available in our showroom and can be delivered immediately.
Location: ex-stock 54634 Bitburg
Mažas skelbimas
Bitburg
1 305 km
Karkasinis presas
Gannomat / GannerConcept 70 Eco
Skambinti
Būklė: naujas, Gamybos metai: 2026, Gannomat Concept 70 Eco
Lamella Case Clamp with Rapid Traverse
Technical data:
Lamella case clamp from our showroom;
Working range: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm;
- Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements
- Lamella pressure beams with proven tolerance compensation for tightly pressed case joints
- Counterpressure surfaces are continuous 40 mm thick, coated support plates
- The pressing force of the pressure beams is continuously electronically adjustable via 2 potentiometers and set using a frequency inverter, ensuring absolutely wear-free torque transmission.
- Pressing force for horizontal pressure beams, min. 500 daN (kg) up to max. 2,200 daN (kg), continuously adjustable
- Pressing force for vertical pressure beams, min. 300 daN (kg) up to max. 2,200 daN (kg), continuously adjustable
- Included option:
Rapid traverse travel speed for quick positioning of the pressure beams, controlled by automatic workpiece detection using sensors in the pressure beams; pressing speed 5/10/25 mm/sec and rapid traverse travel speed 50 mm/sec; sensors can be deactivated for clamping special workpieces.
Ncjdpsy Egz Sjfx Afaeu
- Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cases.
Easy operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm
Machine is on display with us and can be delivered immediately.
Location: ex stock 54634 Bitburg
- immediately available -
Mažas skelbimas
Bitburg
1 305 km
Ilgos skylės gręžimo mašina / Rėmo kaiščių gręžimo mašina
Ganner GannomatJunior 323
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, GANNOMAT "JUNIOR 323"
FRAME DOWEL AND SLOT MORTISER
Nedpfx Afexdttieaecu
Complete in standard configuration according to price list 01/22/D, with:
- Precision collet chuck for ER 40 collets, Ø 3–26 mm.
Includes collets Ø 10 / 13 / 16 / 20
- 1.5 kW motor, 2800 rpm
- Position adjustment via digital counter
- Position adjustment for 2 levels, pneumatic (0–100 mm)
- Maximum drilling depth 150 mm
- Precision indexing rail with 12 mm spacing, featuring:
- Center detent and cross adjustment 320 mm
- 2 pneumatic safety clamping cylinders
- Complete stop system comprising:
1 central stop and 1 stop for extra-wide frames
1 stop rod, approx. 850 mm long (can be switched left to right)
2 flip stops
- Slot mortising attachment, lowerable, with 2 program cams
(400V, 3Ph, 50Hz, 1.5kW)
Extraction funnel Ø 80 mm, dust-tested
Central mitre stop 45°
Pair of auxiliary workpiece supports, swivel-mounted (left and right)
Drill head receptacle
3-spindle drill head, 32 mm pitch (can be rotated 90°)
Chassis with 4 castors, for easy relocation of the machine
Availability: Immediately – short notice –
Mažas skelbimas
Gerolzhofen
1 085 km
Tinkama gręžimo mašina
GANNER-WuerthPrebomat 32
Skambinti
Būklė: naudotas, baldų gamybai
naudota, geros būklės
Su skylučių eilės gręžimo galvute
Mašina išvalyta, funkcionalumas patikrintas. Bandomasis paleidimas,
Ncsdpfxjy Ay Dbj Afaou
atnaujinti suspausto oro vamzdeliai,
atnaujinta guminė apsauga
Gamintojas Ganner Würth
Tipas Prebomat 32
Skylių eilių gręžimo galvutė su tvirtinimo kaiščiais
mechaninė
Velenų skaičius: 7 vnt.
su spaudimo matrica
Sandėliavimo vieta: 97447 Gerolzhofen, pakrauta be pakuotės
Perduodama tokios būklės, kokia apžiūrėta,
be jokių garantijų ir atsakomybės
Mažas skelbimas
Teisendorf
1 117 km
Praeinės apdirbimo centras
GannomatGANNOMAT "PROTEC 571" (Bohren, Nuten, Fr
Skambinti
Būklė: naujas, Gamybos metai: 2026, GANNOMAT "PROTEC 571" (Gręžimas, griovelių frezavimas, frezavimas)
Pilnai sukomplektuota pagrindinė mašina standartinėje komplektacijoje, skirta gręžimui ir griovelių frezavimui, įskaitant:
Papildoma saugos įranga su lameliniu užuolaida
- Reikalinga horizontaliam Lamello P-System frezavimui
- Reikalinga frezos skersmeniui > Ø 16 mm bei naudojant kelių dalių frezavimo įrankius
Išsamūs techniniai duomenys nurodyti ProTec tipo 0571 duomenų lape
Apdirbimo agregatas su: PowerBlock su 21 gręžtuvu ir 1 griovelio pjūklu
- 13 vertikalių gręžimo špindelių
- 6 horizontalūs gręžimo špindeliai Y ašyje / 2 horizontalūs X ašyje
- 1 griovelio agregatas Y ašyje
4-oji gręžimo ašis Y kryptimi
Ruoinio matmenys ir svoriai
- Ruoinio plotis (X): min. 60 mm / maks. 1000 mm
- Ruoinio storis (Z): min. 6 mm / maks. 60 mm
- Ruoinio ilgis (Y): min. 250 mm perleidimo režime
maks. 5600 mm programuojamas ilgis programinėje įrangoje
- Ruoinio svoris: maks. 75 kg
1 Frezavimo agregatas Profit HSK63F su trigubu automatiniu įrankių keitikliu,
Variklis 5,5 kW (S1), 1000–18000 aps./min. su dažnio keitikliu, kairys-dešinys sukimas,
tinka HSK63F įrankių tvirtinimui su 462E/OZ25 spaustuvu, frezos ilgis iki 130 mm
įskaitant papildomas parinktis
1 Susukamas ritininis stalas 765 mm (Y ašis), mašinos priekyje, 500 mm pločio
1 Susukamas ritininis stalas 765 mm (Y ašis), mašinos gale, 500 mm pločio
1 Pagalbinis 600 mm atramos profilis su integruotais ritinėliais ritininiams stalams
1 Įrankiai: ProTec grąžtų komplektas
1 HW griovelio freza Ø 125/30 mm, griovelio plotis (SB) 4 mm, Z=12, K, Leitz firma
1 Frezavimo įrankių rinkinys skirtas Profit HSK63F ir HSK63F su trigubu magazinu
su spaustuvu 462E iki 25 mm koteliui, HSK ir frezų rinkinys
1 HSK montavimo rinkinys
1 Montavimo įtaisas HSK63F,
lengva eksploatacija ir maksimali patogumo sistema su ritininiu tvirtinimu,
nereikia spausti ar priveržti,
sumontuota ant stabilios bazės arba darbastalio,
1 Kablio raktas HSK63F tvirtinimo spaustuvui 462E,
1 Dulkių ištraukimo kolektorius Ø 160 mm / Ø 80-80-80 mm, tvirtinimo anga 196 mm
1 Viršutinė priešspaudos įranga
1 LED apšvietimas darbo zonoje
1 Įrankis vertikaliam Lamello P-System frezavimui
Mašina labai gerai aprūpinta, įskaitant daug grąžtų ir įrankių.
Nauja mašina su pilna garantija.
Mašiną galima apžiūrėti ir išbandyti mūsų ekspozicijoje.
Ypatinga kaina ekspozicinei mašinai – teiraukitės!
Nsdpfozgfwljx Afaocu
Mažas skelbimas
Veszprém
987 km
Horizontalus apdirbimo centras
GannomatPROTEC 571
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 6 700 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 390.829, ruošinio ilgis (maks.): 5 600 mm, ruošinio plotis (maks.): 1 000 mm, ruošinio aukštis (maks.): 60 mm, ruošinio svoris (maks.): 75 kg, bendras aukštis: 1 409 mm, bendras ilgis: 1 484 mm, bendras plotis: 2 325 mm, stalo plotis: 1 000 mm, stalo aukštis: 915 mm, stalo ilgis: 1 484 mm, sukimosi greitis (maks.): 20 000 aps./min, bendras svoris: 1 600 kg, veleno greitis (min.): 1 000 aps./min, veleno greitis (maks.): 20 000 aps./min, ašies variklio galia: 5 500 W, ašies skaičius: 1, įrankių magazino lizdų skaičius: 1, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, įėjimo srovė: 32 A, Įranga: dokumentacija / vadovas, Due to the acquisition of a new machine, our Gannomat Protec 571 CNC machine, purchased new in 2018, is now for sale.
The Gannomat Protec CNC machining centre is a high-precision woodworking machine designed for efficient drilling, milling, and grooving operations. Engineered for versatility and accuracy, it is ideal for machining furniture components and panels. With its advanced automation and robust construction, it delivers repeatable results and significant time savings in production. This machining centre is particularly well-suited for workshops seeking to optimize productivity and achieve seamless processing operations.
Technical specifications:
- Workpiece width X: 60 - 1000 mm
- Workpiece length Y: 250 - 5600 mm
- Workpiece height Z: 6 - 60 mm
- Workpiece weight: 75 kg
- Rapid processing: 21 drilling spindles
- Stable grooving unit: 8.3 mm saw blade width
- Powerful milling unit: 5.5 kW (S1), reversible rotation
- Compact footprint: Less than 3.3 m²
Machine is supplied with:
- Drilling tools and 1 HSK63 chuck and tool for the machining tasks required in a modern joinery workshop.
Ncodpfxoxltlus Afaeu
Additional software:
- Gannomat Editor office software: EUR 1,000 (installation and activation performed by Gannomat at an additional cost)
- DXF postprocessor for efficient workflow: EUR 1,000 (installation and activation performed by Gannomat at an additional cost)
PLEASE NOTE:
Low operating hours
The price of the machine does not include VAT.
Mažas skelbimas
Rodgau
1 160 km
CNC apdirbimo centras
GannomatProTec 0571
Skambinti
Būklė: naudotas, Gamybos metai: 2023, New demonstration machine! List price: €86,567 net. Base machine complete in standard configuration for drilling and grooving. For detailed technical specifications, please refer to the data sheet for ProTec Type 0571.
Working unit with: PowerBlock with 21 spindles and 1 grooving saw:
- 13 vertical drilling spindles
- 6 horizontal drilling spindles in Y
- 2 horizontal drilling spindles in X
- 1 grooving unit in Y
Fourth drilling axis in Y.
Workpiece sizes and weights:
- Workpiece width (X): min. 60 mm / max. 1000 mm
- Workpiece thickness (Z): min. 6 mm / max. 60 mm
- Workpiece length (Y): min. 250 mm in through-feed mode, max. 5600 mm programmable workpiece length in software
- Workpiece weight: max. 75 kg
Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000–20,000 rpm with frequency inverter, reversible rotation, for HSK63F tool holders with ER 462E/OZ25 collet chuck, cutter length up to 130 mm.
Information: MultiUnit machining head with PowerBlock with 21/23 spindles, grooving saw, and optional Profit milling unit.
Connection values:
- Connected load: 12 kVA
Ncodpfx Ajw Tfzfofaju
- Rated current: 17.5 A
- Fuse: 32 A
- Voltage: 400 V, 50 Hz, 3-phase (without transformer)
- Network: TN or TT
- Pneumatic connection: 7 bar (102 psi)
On the machine: Coupling plug (quick coupling) ¼", DN7.2, brass, factory-fitted
To the machine: Coupling socket (quick coupling) ¼", DN7.2, brass, customer side
Supply line, minimum hose internal diameter 12 mm
Compressed air demand: Continuous air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air)
Extraction:
- Connection: 3 x extraction nozzles, Ø 80 mm
- Extraction speed: 30 m/sec (measured at extraction nozzle)
- Extraction requirement: min. approx. 2500 m³/h
Machine weight: approx. 1650 kg (with options!)
Machine installation site:
A ProTec fix can, in principle, be bolted to the floor. A concrete floor (or foundation) is required—at least at the four machine corners/feet.
Equipment:
- Protec 571 Profit HSK63F with 3-position magazine
- Folding roller table 765 mm (Y-axis), for machine front, width 500 mm
- Folding roller table 765 mm (Y-axis), for machine rear, width 500 mm
- Auxiliary stop 600 mm with integrated rollers for roller tables
- Additional safety device via lamellar curtain
- Necessary for horizontal milling for Lamello P-System (without tools for Lamello P-System)
Drill set for Protec:
- Shank Ø 10 mm with clamping surface (JSO)
- 1 HW roof tip drill 5x70mm (NL 35mm), LH #30566-5-05035-L
- 3 HW dowel drills 5x70mm (NL 35mm), RH #30540-5-05035-R
- 4 HW dowel drills 5x70mm (NL 35mm), LH #30540-5-05035-L
- 3 HW dowel drills 8x70mm (NL 35mm), RH #30540-5-08035-R
- 5 HW dowel drills 8x70mm (NL 35mm), LH #30540-5-08035-L
- 2 HW dowel drills 10x70mm (NL 35mm), LH #30540-5-10035-L
- 1 HW cup drill 15x70mm (NL 35mm), LH #30300-5-15070-L
- 1 HW cup drill 20x70mm (NL 35mm), RH #30300-5-20070-R
- 1 HW cup drill 35x70mm (NL 35mm), RH #30300-5-35070-R
- HW grooving cutter Ø 125/30 mm
- Groove width (SB) 4.0 mm, Z=12, LH, Leitz
Only for chipboard and MDF, solid wood on request and after consultation
Tool holders HSK63F 3 pcs
For collet 462E/OZ25
Collet 462E/OZ25 for shank 25 mm, 3 pcs
Insert cutter shank Z1+1, 1 pc HW with reversible knife drill tip Ø20, S25, LH 120, L2/L3 58 mm
Grooving cutter HW insert Z1, 1 pc with reversible knife drill tip, D Ø10 mm, d Ø10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separately)
Decorative
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Rodgau
1 160 km
CNC apdirbimo centras
GannomatProTec 0571A
Skambinti
Būklė: naudotas, Gamybos metai: 2019, Machine construction: Through-feed/return
Processing size in X-direction: 1300 mm
Processing size in Y-direction: 5600 mm
Processing thickness (Z-dimension): 60 mm
Number of main spindles: 1 pcs
Main spindle power: 5.5 kW
Main spindle speed: 1,000–20,000 rpm
Clamping system: HSK-63 F
Tool changer: pick-up changer
Tool positions: 3 pcs
Rear groove unit: fixed in Y-direction
Vertical drilling spindles - in X-direction: 3 pcs
Vertical drilling spindles - in Y-direction: 10 pcs
Horizontal drilling spindle in X-direction: 2 pcs
Horizontal drilling spindle in Y-direction: 6 pcs
Control type: PC control
Operating system: Windows
Typewriter keyboard: Yes
Mouse: Yes
Programming system: Gannomat Editor
DXF interface: Yes
Online connectivity possible: Yes
Table design: fixed, smooth table
Central lubrication: automatic
Tools: various tools
Operating hours: 920 hrs
Weight approx.: 1,800 kg
Extraction diameter: 3x80 mm
The machine was upgraded at the factory, with pressure beam and control technology from model 0572!
Njdsymp N Tspfx Afaecu
Storage location: Customer
Mažas skelbimas
Telfs
1 245 km
CNC apdirbimo centras GANNOMAT ProTec
GannomatProTec
Skambinti
Būklė: naujas, Gamybos metai: 2026, Gannomat ProTec - CNC Throughfeed Machine for Drilling, Grooving, and Milling Operations
Brief Description:
• Compact footprint, under 3.3 m²
• Handles large (1000 x 5600 x 60 mm) and small (60 x 250 x 6 mm) workpiece dimensions
• Gentle workpiece processing via air nozzles
• Precision ensured by dual laser measurement and workpiece straightening
• Rapid processing thanks to 21/23 drilling spindles
• 21/23 drilling spindles enable zero setup times
• Robust grooving unit for saw blade widths up to 8.3 mm
• Powerful milling unit 5.5 kW (S1), optional
• Automatic tool changer for milling unit, optional
CNC controlled DRILLING, GROOVING, and MILLING on less than 3.3 m² with high processing precision and zero setup time – that’s what the GANNOMAT ProTec stands for.
TECHNOLOGY:
The heavy-duty processing unit is equipped with 13 vertical drilling spindles, 8 double horizontal drilling spindles (6Y & 2X), 1 grooving saw on the Y-axis, and one milling unit. This combination of units allows all common drills/tools to be clamped in one setup, ready to be called up as needed.
This CNC-controlled machining center operates from below and can be configured for throughfeed or return-to-operator modes.
Steel support tables with air nozzles provide the reference surface for horizontal drilling. In conjunction with the robust workpiece clamps and the additional fourth axis on the drilling head, extremely precise drilling is possible. A contactless laser sensor is used to detect the actual workpiece edges (top and bottom), enabling automatic correction/adjustment of the drilling program.
APPLICATION AREA:
The ProTec delivers high-tech performance in both technology and application and was designed as an entry-level CNC machine for small and medium-sized manufacturers, as well as a secondary machine for traditional machining centers to prevent production bottlenecks.
FIELDS OF APPLICATION:
Njdsbiplrspfx Afaocu
A universal range of applications and high customer benefit through excellent cost-effectiveness are key advantages of the GANNOMAT ProTec. Developed especially for maximum flexibility with batch size one up to serial production, along with high precision and zero setup time.
The GANNOMAT ProTec is designed for comprehensive machining of cabinet side panels, bottoms, rails, back panels, furniture doors, drawer parts, drawer fronts, worktops, frame components, tables, sliding doors, templates, and more.
It can drill dowel holes, line boring, holes for mounting plates, connectors, drawer runners, fittings, cabinet hangers, handle holes, lock holes, etc.
With the grooving unit, back panel grooves (also as rebates) or grooves in drawer fronts can be produced.
The milling unit can perform milling such as (selection): all types of pockets, tambour door guide grooves, spot and cable pass-throughs, handle recesses, plinth cut-outs, recesses for flush handles and furniture locks, lock mortises, ventilation openings in doors, kitchen worktop connections, as well as partial milling, for example for kitchen worktops, furniture frame doors, and much more.
Another application for the ProTec is milling standard contours that are otherwise machined conventionally with jigs and handheld routers.
Sheet materials such as chipboard, solid wood, multi-layer boards, and lightweight panels can be efficiently processed with the ProTec.
Mažas skelbimas
Bitburg
1 305 km
Automatinė kaiščių įkalimo mašina
GannomatSelekta
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Brand: Ganner Gannomat
Model: SELEKTA 253
220 V, 1 Ph, 50 Hz
Year: 2022 - used
Complete in standard configuration with:
- Fully automatic electronic control with program selector switch for RINSING - GLUING - GLUING/DRIVING IN
- Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of dowel feed rate
- Automatic dowel diameter and dowel length control with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container)
- Closed glue system with 6 bar glue pressure via glue nozzle for glues with viscosity from 150 to 350 mPas
- Stepless electronic glue quantity adjustment with potentiometer using time preselection via electronic control
- Selector switch GLUE/WATER for rinsing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and waste water collection container)
- Indicator lamp for remaining glue level in glue container
- 1 stainless steel container for 5 kg glue and 1 stainless steel container for 5 l water for rinsing/cleaning
- 4 castors for moving the machine
Including 1 gun for dowels Ø 8 mm, dowel length 25 - 40 mm
Driving in overhang 7 - 20 mm
Air connection: 6 bar
Ncodpfezbyu Aex Afaeu
Price ex stock 54634 Bitburg
- immediately available -
Mažas skelbimas
Bitburg
1 305 km
Klijų barstytuvas
GannomatSelekta 253 - sofort verfügbar -
Skambinti
Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, - NEW -
Make: Ganner Gannomat
Model: SELEKTA 253
220 V, 1 Ph, 50 Hz
Complete in standard configuration with:
- Fully automatic electronic control system with program selection switch: FLUSHING – GLUING – GLUING/DRIVING-IN
- Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of dowel feed rate
- Automatic dowel diameter and dowel length monitoring with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container)
- Closed glue system with 6 bar glue pressure via glue nozzle, suitable for glues with a viscosity of 150 to 350 mPas
- Stepless electronic glue quantity adjustment with potentiometer, controlled by timer through the electronic control system
- Selector switch GLUE/WATER for flushing/cleaning the glue system, with EasyClean function key (automatic cleaning program for the glue hose and glue nozzle via spray funnel and wastewater collection container)
- Control lamp for remaining glue indicator in the glue container
- 1 stainless steel container for 5 kg glue and 1 stainless steel container for 5 l water for flushing/cleaning
- 4 casters for moving the machine
Ncodpfx Afedwi Rkjaju
Including 1 gun for dowels Ø 8 mm, dowel length 25 - 40 mm, driving-in depth 7 - 20 mm
Air connection: 6 bar
Price ex stock 54634 Bitburg
- Immediately available -
Palengviname jums paiešką: "ganner protec"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.



















































































































































