Gannomat Cnc pirkti naudotą (55)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, CNC-controlled precision machining center Gannomat Type Protec 571 CNC • For drilling, grooving, and milling Machining unit with PowerBlock featuring 21 spindles and 1 grooving saw: • Vertical drilling spindles: 13 • Horizontal drilling spindles in Y: 6 • Horizontal drilling spindles in X: 2 • Grooving unit in Y: 1 • Milling unit 'Profit': 4.5 kW, 3000 - 18000 rpm, with frequency converter • Workpiece width (X): min. 85 mm / max. 1000 mm • Workpiece thickness (Z): min. 6 mm / max. 60 mm • Workpiece length (Y): min. 285 mm in through-feed mode / max. 5600 mm programmable in software • Workpiece weight: max. 70 kg Processing speeds per axis: • On the X-axis: max. 90 m/min • On the Y-axis: max. 30 m/min • On the Z-axis: max. 15 m/min Ksdowvk Auepfx Agfjlp

Būklė: naujas, Gamybos metai: 2026, CNC valdomas gręžimo ir furnitūros montavimo automatas su žurnalu automatiniam puodelinių lankstų ir montavimo plokštelių apdorojimui. Mūsų automatiniai CNC valdomi gręžimo ir montavimo automatai pasižymi tvirtumu, ilgaamžiškumu ir paprastu valdymu. Trumpas pristatymas: • CNC valdomas puodelinių lankstų gręžimo ir įspaudimo automatas dideliam našumui Kedpfx Asdx A U Hsgfelp • Lankstumas dėl CNC valdymo • Tvirti ir patvarūs GANNOMAT gręžimo agregatai • Plieninė įspaudimo matrica ilgam tarnavimo laikui • Masinės medienos gręžimas su standartiniu 1,5 kW varikliu • Saugos valdymas su metalo detektoriumi (pasirinktinai)

Būklė: naujas, Gamybos metai: 2026, Gannomat ProTec - CNC Throughfeed Machine for Drilling, Grooving, and Milling Operations Brief Description: • Compact footprint, under 3.3 m² • Handles large (1000 x 5600 x 60 mm) and small (60 x 250 x 6 mm) workpiece dimensions • Gentle workpiece processing via air nozzles • Precision ensured by dual laser measurement and workpiece straightening Klsdpfx Aobiplrogfep • Rapid processing thanks to 21/23 drilling spindles • 21/23 drilling spindles enable zero setup times • Robust grooving unit for saw blade widths up to 8.3 mm • Powerful milling unit 5.5 kW (S1), optional • Automatic tool changer for milling unit, optional CNC controlled DRILLING, GROOVING, and MILLING on less than 3.3 m² with high processing precision and zero setup time – that’s what the GANNOMAT ProTec stands for. TECHNOLOGY: The heavy-duty processing unit is equipped with 13 vertical drilling spindles, 8 double horizontal drilling spindles (6Y & 2X), 1 grooving saw on the Y-axis, and one milling unit. This combination of units allows all common drills/tools to be clamped in one setup, ready to be called up as needed. This CNC-controlled machining center operates from below and can be configured for throughfeed or return-to-operator modes. Steel support tables with air nozzles provide the reference surface for horizontal drilling. In conjunction with the robust workpiece clamps and the additional fourth axis on the drilling head, extremely precise drilling is possible. A contactless laser sensor is used to detect the actual workpiece edges (top and bottom), enabling automatic correction/adjustment of the drilling program. APPLICATION AREA: The ProTec delivers high-tech performance in both technology and application and was designed as an entry-level CNC machine for small and medium-sized manufacturers, as well as a secondary machine for traditional machining centers to prevent production bottlenecks. FIELDS OF APPLICATION: A universal range of applications and high customer benefit through excellent cost-effectiveness are key advantages of the GANNOMAT ProTec. Developed especially for maximum flexibility with batch size one up to serial production, along with high precision and zero setup time. The GANNOMAT ProTec is designed for comprehensive machining of cabinet side panels, bottoms, rails, back panels, furniture doors, drawer parts, drawer fronts, worktops, frame components, tables, sliding doors, templates, and more. It can drill dowel holes, line boring, holes for mounting plates, connectors, drawer runners, fittings, cabinet hangers, handle holes, lock holes, etc. With the grooving unit, back panel grooves (also as rebates) or grooves in drawer fronts can be produced. The milling unit can perform milling such as (selection): all types of pockets, tambour door guide grooves, spot and cable pass-throughs, handle recesses, plinth cut-outs, recesses for flush handles and furniture locks, lock mortises, ventilation openings in doors, kitchen worktop connections, as well as partial milling, for example for kitchen worktops, furniture frame doors, and much more. Another application for the ProTec is milling standard contours that are otherwise machined conventionally with jigs and handheld routers. Sheet materials such as chipboard, solid wood, multi-layer boards, and lightweight panels can be efficiently processed with the ProTec.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 24 058 h, galia: 7 kW (9,52 AG), įėjimo įtampa: 480 V, įėjimo srovė: 10 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, X ašies eiga: 1 000 mm, ruošinio ilgis (maks.): 4 000 mm, ruošinio plotis (maks.): 1 000 mm, ruošinio aukštis (maks.): 60 mm, ruošinio svoris (maks.): 70 kg, ašių skaičius: 3, pavaros tipas: pneumatinis, bendras aukštis: 1 430 mm, bendras ilgis: 2 300 mm, bendras plotis: 1 500 mm, bendras svoris: 1 100 kg, stalo ilgis: 3 300 mm, stalo plotis: 1 000 mm, Įranga: CE žymėjimas, dokumentacija / vadovas, Gannomat 570 ProTec T2, BK6, gręžimas, grioveliavimas, vis dar prijungta demonstravimui, geros būklės. Ideali mašina kaip priedas prie CNC apdirbimo centro, efektyvesnei korpusų gamybai su trumpiausiais perstatymo laikais nuo vieneto kiekio 1. Taip pat puikiai tinka kaip įėjimo mašina į CNC valdomą apdirbimo technologiją – už mažą pradinę kainą – mažoms ir labai mažoms stalių dirbtuvėms efektyviai ir švariai korpusų gamybai. Galimi šie naudojimo pavyzdžiai: formos ir jėgos jungtys bei preciziškai tikslūs sujungimai, pvz., kaištiniai sujungimai, linijiniai gręžimai, baldų lankstų gręžimai, spynų gręžimai, įvairūs jungiamieji elementai, pavyzdžiui, Rastex, Cabineo ir kt. Į komplektą įeina priedai: vadovas su elektros schema, pasirinktiniai grąžtai, dulkių nutraukimo vamzdis. Mašina greitai paruošiama pakrovimui, stovi ant lygaus paviršiaus. Klodpfxeytxpvs Agfsp

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good condition, as new; the machine comes from a very small joinery and was only used very little there. The machine is in its original condition, it has only been cleaned; the paintwork has not been touched up. With this machine, you can mill slots and drill dowel holes on 2 levels without repositioning the workpiece. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill mortises for, for example, lock cases and similar applications, or produce all types of frame dowel joints—at right angles, butt, and mitre joints. Ideal for manufacturing dowel joints in timber frame construction, furniture, doors, windows, and staircases, as well as similar applications. Thanks to drilling on 2 levels, index stops, and the machine's layout, dowel joints are made in the shortest possible time, making the machine highly efficient. The machine requires a compressed air connection at 6 bar (very low air consumption). Clockwise rotation Mills and drills very precisely and cleanly. Comes with 2 angle stops (one center stop and one side stop, usable on both sides). Includes a mitre stop. Kedpfx Aoynv E Regfolp At the front of the machine table, there's a 2000mm long stop rail with 2 flip stops; the rail can be shortened or extended if needed. Workpiece clamping is performed with 2 pneumatic clamping cylinders. Height adjustment from one drilling level to another is also pneumatic; the pneumatic switch is located at the front of the machine, allowing quick adjustment between index positions and drilling levels. Equipped with a precision 12mm indexing rail, featuring a center index and 12 stops to the left and right. Can quickly be converted to slot mortising; in this mode, the machine can be used without an index rail, with 2 adjustable stops on the left and right, providing a maximum working width of 420mm. Maximum drilling height is 100mm. Maximum drilling depth is 150mm with stop and scale. Maximum workpiece height is 160mm. Everything is functioning flawlessly. We deliver and demonstrate the machine personally across Germany for €220, so you take no risk when purchasing. Delivery to Austria and the EU is also possible upon request. Machine table is 870mm wide; the sides are 140mm deep and the center section is 350mm deep. Professional equipment, not DIY market junk. The machine is ready for immediate use. Comes with a 2-jaw drill chuck up to 20mm. Very robust and durable construction. The precision guides with play-free ball bearing bushings are in good condition and run smoothly.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" Working Width 1300 Drilling, Grooving, Milling Base machine complete in standard version as per price list 01/19/D: For detailed technical data, see PROTEC Type 0571 data sheet - Processing unit with: PowerBlock with 21 spindles and 1 grooving saw (BK 1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y axis - 2 horizontal drilling spindles in X axis - 1 grooving unit in Y axis 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, 5.5 kW motor (S1), 1000-20000 rpm with frequency converter, right and left rotation, HSK63F tool holder with 462E collet, milling cutter length up to 130 mm. - INCLUDING OPTION: Additional safety device with lamella curtain for processing Lamello P-System. Required for horizontal milling for Lamello P-System with slot cutter Ø 100.4 x 7 x 30 mm. - Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm Kedpfx Asw Sguwogfslp - Workpiece length (Y): min. 263 mm in throughfeed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. - Air supply: 7 bar Machine No. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A) - Top pressure device for working width 1300 mm - Roller table 765 mm (Y axis), foldable, for machine front, B 500 mm - Roller table 765 mm (Y axis), foldable, for machine rear, B 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction manifold Ø 160 mm / Ø 80-80-80 mm, spacing 196 mm - Documentation in German: Operating instructions: GERMAN Programming instructions: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Location: ex stock 54634 Bitburg - immediately available -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, - NEW - Manufacturer: Ganner Gannomat Model: SELEKTA 253 220 V, 1 phase, 50 Hz Complete in standard configuration with: - Fully automatic electronic control with program selector switch FLUSH-GLUE-GLUE/INSERT - Dowel feed via electronic vibrating feeder with potentiometer for stepless adjustment of the dowel feed rate - Automatic dowel diameter and length control with Auto-DL-Selekt System (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed glue system with 6 bar glue pressure via glue nozzle for adhesives with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via time preselection through electronic control - Selector switch GLUE/WATER for flushing/cleaning the gluing system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and wastewater collection container) - Indicator lamp for glue level warning in the glue container - 1 stainless steel container for 5 kg glue and 1 stainless steel container for 5 l water for flushing/cleaning - 4 casters for moving the machine Klsdpfxedwi Rkj Agfjp Including 1 dowel gun for dowel Ø 8 mm, dowel length 25 - 40 mm, Insertion protrusion 7 - 20 mm Air connection: 6 bar Price from 11,750 EUR From stock 54634 Bitburg

Būklė: naudotas, Gamybos metai: 2019, Machine construction: Through-feed/return Processing size in X-direction: 1300 mm Processing size in Y-direction: 5600 mm Processing thickness (Z-dimension): 60 mm Number of main spindles: 1 unit Main spindle power: 5.5 kW Main spindle speed: 1,000 – 20,000 rpm Clamping system: HSK-63 F Tool changer: Pick-up changer Tool changer positions: 3 units Back panel groove unit: Fixed in Y-direction Vertical drill spindles in X-direction: 3 units Vertical drill spindles in Y-direction: 10 units Horizontal drill spindles in X-direction: 2 units Horizontal drill spindles in Y-direction: 6 units Control type: PC control Operating system: Windows Typewriter keyboard: Yes Mouse: Yes Programming system: Gannomat Editor DXF interface: Yes Office version available: Yes Online connectivity possible: Yes Table design: Fixed, smooth table Central lubrication: Automatic Ksdpfxjymp N Tj Agfjlp Tools: Various tools Operating hours: 920 h Weight approx.: 1,800 kg Extraction diameter: 3x 80 mm The machine has been modernized at the factory; pressure beam and control technology from model 0572! Location: Customer

Būklė: geras (naudotas), Gamybos metai: 1998, Universal frame dowel and slot mortising machine with angle adjustment Specially designed for stair and window manufacturing, as well as for universal applications thanks to pneumatic height adjustment. Angled dowelling and baluster drilling can be easily performed using the swiveling boring unit. Motor with pole switching, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start with convenient handle switch Equipped with Röhm two-jaw chuck 1 - 20mm Linear laser for precise workpiece positioning Drilling unit swivels 65° left/right Pneumatic adjustment of working height, dowelling possible on two levels without realignment Desired drilling heights can be preset for each drilling level using digital counter; pneumatic switching from the front Cross adjustment 340mm, stepless or in 12mm increments, with index rail Pneumatic clamping possible at any position, operable from the front Maximum height adjustment approx. 100mm above table height Boring stroke approx. 200mm Kedjxmatnspfx Agfslp 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front 2 swivel work supports Extraction funnel Center fence + 1 side fence Fixed miter fence Length stop as round bar Assortment of drill bits Operating manual CE marking Machine was partially repainted due to paint splashes Pneumatic hoses renewed Dimensions approx. 1200 x 1350 x 1600mm (LxWxH), weight 380kg The machine can be inspected by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse; see “other offers from this supplier.”

Būklė: naudotas, Gamybos metai: 2022, New display machine! List price: €14,200. 400V, 3Ph, 50Hz / 1.5 kW Fully equipped in standard configuration with: - Fully automatic electronic control with pulse operation via foot pedal for clamping–drilling–unclamping; - Electric automatic return of the drilling unit after reaching the set drilling depth; - Automatic drilling depth extension for face drilling saves readjustment between flat and face holes (+10 mm, e.g. for dowel length 35 mm, drilling depth flat surface 14 mm, drilling depth face side 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0–70 mm). - Includes 21 quick-change chucks (Ganner system) for easy bit replacement. - Drilling unit swivels from 0° to 90°, assisted by gas cylinder. - 1 clamping carrier movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece heights up to max. 80 mm. - Complete stop system consisting of: - 1 stop rail, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 position stops and quick-change system, easily switchable from right to left for mirrored shelf drilling in cabinet construction; also suitable for line drilling in the 32 mm system. - Stops and position settings as well as drilling height adjustment via support table with mechanical digital display. Stops can be swung out for quick conversion from cabinet to frame and vice versa. - Arms for clamping carrier made for line drilling up to max. 300 mm position. Ideal three-stage tooling system. - 1 set of dowel drills: 5 carbide dowel drills, Ø 8x77 mm, right; 4 carbide dowel drills, Ø 8x77 mm, left. Additional equipment: - Extraction funnel, dust-tested, Ø 120 mm. - Complete set for line drilling in the 32 mm system with: - 2 guides with scale and adapter for positions up to max. 300 mm, - 2 pairs of position cams for row drilling at Y-position 37 mm and e.g. 300 mm, - 1 base rail 1000 mm (aluminum profile 40x40 mm), - 1 setting gauge for line drilling. - 1 set of drills: - 11 carbide line drills, Ø 5x57 mm, right; Klsdpeqw Ek Iofx Agfep - 10 carbide line drills, Ø 5x57 mm, left. - Hydraulic brake cylinder. - Additional clamping cylinder with bracket. Location:

Būklė: naudotas, Gamybos metai: 2023, New demonstration machine! List price: €86,567 net. Base machine complete in standard configuration for drilling and grooving. For detailed technical specifications, please refer to the data sheet for ProTec Type 0571. Working unit with: PowerBlock with 21 spindles and 1 grooving saw: - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y Fourth drilling axis in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000–20,000 rpm with frequency inverter, reversible rotation, for HSK63F tool holders with ER 462E/OZ25 collet chuck, cutter length up to 130 mm. Information: MultiUnit machining head with PowerBlock with 21/23 spindles, grooving saw, and optional Profit milling unit. Connection values: - Connected load: 12 kVA - Rated current: 17.5 A - Fuse: 32 A - Voltage: 400 V, 50 Hz, 3-phase (without transformer) - Network: TN or TT - Pneumatic connection: 7 bar (102 psi) On the machine: Coupling plug (quick coupling) ¼", DN7.2, brass, factory-fitted To the machine: Coupling socket (quick coupling) ¼", DN7.2, brass, customer side Supply line, minimum hose internal diameter 12 mm Compressed air demand: Continuous air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air) Extraction: - Connection: 3 x extraction nozzles, Ø 80 mm - Extraction speed: 30 m/sec (measured at extraction nozzle) - Extraction requirement: min. approx. 2500 m³/h Machine weight: approx. 1650 kg (with options!) Machine installation site: A ProTec fix can, in principle, be bolted to the floor. A concrete floor (or foundation) is required—at least at the four machine corners/feet. Equipment: - Protec 571 Profit HSK63F with 3-position magazine - Folding roller table 765 mm (Y-axis), for machine front, width 500 mm - Folding roller table 765 mm (Y-axis), for machine rear, width 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Additional safety device via lamellar curtain - Necessary for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill set for Protec: - Shank Ø 10 mm with clamping surface (JSO) - 1 HW roof tip drill 5x70mm (NL 35mm), LH #30566-5-05035-L - 3 HW dowel drills 5x70mm (NL 35mm), RH #30540-5-05035-R - 4 HW dowel drills 5x70mm (NL 35mm), LH #30540-5-05035-L - 3 HW dowel drills 8x70mm (NL 35mm), RH #30540-5-08035-R Ksdpew Tfzfsfx Agfolp - 5 HW dowel drills 8x70mm (NL 35mm), LH #30540-5-08035-L - 2 HW dowel drills 10x70mm (NL 35mm), LH #30540-5-10035-L - 1 HW cup drill 15x70mm (NL 35mm), LH #30300-5-15070-L - 1 HW cup drill 20x70mm (NL 35mm), RH #30300-5-20070-R - 1 HW cup drill 35x70mm (NL 35mm), RH #30300-5-35070-R - HW grooving cutter Ø 125/30 mm - Groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and after consultation Tool holders HSK63F 3 pcs For collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm, 3 pcs Insert cutter shank Z1+1, 1 pc HW with reversible knife drill tip Ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW insert Z1, 1 pc with reversible knife drill tip, D Ø10 mm, d Ø10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separately) Decorative

Būklė: naujas, Gamybos metai: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND SLOT BORING MACHINE ESPECIALLY FOR STAIRCASE CONSTRUCTION Complete in standard design according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets, Ø 3-26 mm incl. collets Ø 10 / 13 / 16 / 20 - Two-speed switchover motor 1400/2800 rpm, 1.5 kW - Linear laser with holder - Boring unit, steplessly rotatable from the front (65°-0°-65°) - Position adjustment via digital counter - Positioning adjustment for 2 levels, pneumatic (0-100 mm) - Max. drilling depth 200 mm - Precision indexing rail with 12 mm increments, with central locking t and cross adjustment of 320 mm - Complete stop system consisting of: 1 central stop and 1 stop for extra-wide frames 1 stop bar approx. 850 mm long (can be relocated from left to right in mirror image) 2 folding stops - Slot mortising device, retractable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter fence adjustable 0°-60° Pneumatic clamping of the X-axis with on/off switch on the indexing lever Pair of workpiece support arms, swivelling (left and right) Kljdsxdttpjpfx Agfsp Clamping column can be repositioned to the front Chassis with 4 wheels for easy transport of the machine 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm made of chrome steel with centering tip Availability: short notice

Būklė: naujas, Gamybos metai: 2026, SURFACE CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction - Lateral pressing beam featuring a continuous pressure surface with a 25 mm thick, coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick, coated support plates - Electromotive adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased lead and concentricity accuracy) and high-performance slide nuts with grease reservoir - Pressing is electromotive via a worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely electronically adjustable by potentiometer and regulated via frequency converter, ensuring completely wear-free press force control - Pressing force for vertical pressing beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, controlled via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the pressing beam, e.g., for low pressing forces such as drawers, etc. - Simple operation via 2 separate push buttons, 2 movement sequences (Open/Close) selectable from the control panel - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both pressing beams - Repress function to increase or decrease pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Minimum length: 150 mm, Maximum length: 1300 mm Minimum height: 150 mm, Maximum height: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Kodew Sgnkopfx Agfjlp Availability: short notice

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISER Complete in standard configuration according to price list 01/22/D, with: - Precision collet chuck for ER 40 collets, Ø 3–26 mm. Includes collets Ø 10 / 13 / 16 / 20 - 1.5 kW motor, 2800 rpm - Position adjustment via digital counter - Position adjustment for 2 levels, pneumatic (0–100 mm) - Maximum drilling depth 150 mm - Precision indexing rail with 12 mm spacing, featuring: - Center detent and cross adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete stop system comprising: 1 central stop and 1 stop for extra-wide frames 1 stop rod, approx. 850 mm long (can be switched left to right) 2 flip stops Kljdpfxjxdttie Agfsp - Slot mortising attachment, lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Extraction funnel Ø 80 mm, dust-tested Central mitre stop 45° Pair of auxiliary workpiece supports, swivel-mounted (left and right) Drill head receptacle 3-spindle drill head, 32 mm pitch (can be rotated 90°) Chassis with 4 castors, for easy relocation of the machine Availability: Immediately – short notice –

Būklė: naujas, Gamybos metai: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard version with: - Support with linear guidance consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for 8 mm Ø dowels, dowel length 25–50 mm Kjdpfew Sgm Hsx Agfjlp - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traverse speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position over table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth from 0–35 mm (with drill length GL 70 mm) automatically set with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity of 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for rinsing glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 liters water - Indicator lamp for glue level display in glue container - 1 pc. left side fence, 1 pc. right side fence (both removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic inclined clamping cylinders 10° for workpiece thickness up to max. 80 mm, minimum workpiece length (Y) 70 mm - 1 pc. suction hood, connection Ø 80 mm - 1 pc. TCT control with: Built-in industrial PC incl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, 15" capacitive TFT industrial touchscreen display, Operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-driven user software, drilling positions freely programmable with ABSOLUTE, RELATIVE or GRID dimensions, automatic workpiece mirroring and operation optimization, two workzones programmable with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, plain text error diagnostics - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle Art. no. 0470-0810 - 1 EASY CLEAN system for automatic test glue shots prior to the start of the work program (drilling/gluing/dowel insertion). E.C.S. for 1 pc. glue nozzle Art. no. 0471-Z010 - 1 single-spindle vertical drilling unit, drilling from above, 0.65 kW (3000/5000/8000 rpm), Y-position manually adjustable via mechanical digital counter from 5–40 mm, max. drilling depth (Z) 30 mm (with drill length GL 57 mm). Max. workpiece thickness (Z) 50 mm, minimum workpiece length (Y) 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) Art. no. 0471-0830 - 4 vertical inclined clamping cylinders 10° with holder, additional, Art. no. 0470-0850 Available: at short notice

Būklė: naujas, Gamybos metai: 2025, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) Kodpfxsiidm No Agfslp - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Būklė: naudotas, Gamybos metai: 1999, mašinos/transporto priemonės numeris: 1088.968, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 55 h, bendras plotis: 700 mm, bendras ilgis: 900 mm, bendras aukštis: 650 mm, bendras svoris: 70 kg, ašies skaičius: 5, Siūlome šią naudotą Gannomat Modell204 furnitūros gręžimo staklę, pagamintą 1999 m. Kjdsyak Hyepfx Agfslp

Būklė: naujas, Gamybos metai: 2025, Advantages of Pre-glued Dowels • No additional glue required when shooting the dowel • No cleaning effort for the water supply system Advantages of DübelJet • Recoil-free gun • Simple handling • Mobile handheld device • Versatile application range Technical Data of DübelJet Dowel system and water supply system designed for pre-glued dowels • Dowel diameter: 8 mm • Dowel length: 35 mm (factory setting, adjustable from 30 to 40 mm) • Dowel projection: 12 mm (factory setting, adjustable from 7 to 20 mm) Versatile Application Range Kodpfx Aewu Dnnogfjlp • Driving in pre-glued dowels (with water), especially in furniture manufacturing • Driving in positioning dowels (without water) made of wood or plastic, e.g., in frame construction or in combination with screws or carcass connectors

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, Gannomat Model 260 Carcase Press Clamping dimensions: 2500 x 1250 x 650 mm Working pressure: 0-10 bar Cylinder stroke: 110 mm Space requirement: 3240 x 2120 x 770 mm Klodpfx Aerfbnbsgfsp Weight: 900 kg Year of manufacture: 2010 CE compliant The machine is currently being refurbished; further photos will be available shortly.

Būklė: naudotas, Gamybos metai: 2017, Gręžimo velenų kiekis: 21 vnt Žingsnis: 32 mm Grąžto tvirtinimas: Grąžto kotelio spaudimo paviršius: 10 mm Kjdjihghrspfx Agfolp Valdymas: kojinis pedalas Įrankiai: Taip Gręžimo kryptis: iš apačios ir iš priekio Pasukimas: rankinis Pasukimo kampas: tik 0° arba 90° Maks. laisvas aukštis: 80 mm Maks. laisvas plotis: 750 mm Medžiagos spaustuvų kiekis: 3 vnt Medžiagos prispaudimo tipas: pneumatinis Tipas: stacionarus Atramos sistema: tik konstrukcijų serijai Svoris apie: 400 kg Variklio galia: 1,5 kW Nusiurbimo skersmuo: 120 mm Sandėliavimo vieta: pas klientą

Būklė: naudotas, Gamybos metai: 2024, New demonstration machine! List price: €32,665 complete in standard configuration with: - Sturdy, torsion-resistant steel frame in welded and bolted construction - Top lamella pressure beam with 6 elements; side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly pressed carcass joints - Back pressure surfaces (side pressure wall and base) are continuous, coated support panels, 38 mm thick - Continuous pressing surface with a height of 95 mm at the lower vertical pressure beam Kodpfx Agjuf Hx Hofolp - Electromotive adjustment of both pressure beams via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance running nuts with grease reservoir - Pressing is performed electromotively via two separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and controlled by a frequency converter, resulting in absolutely wear-free press force regulation - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to max. 2200 daN (kg), infinitely adjustable - Pressing force for vertical pressure beam: min. 300 daN (kg) up to max. 2200 daN (kg), infinitely adjustable - Pressing and adjustment speed of pressure beams with fine positioning via 3-step selector switch: 5 / 10 / 25 mm/second - Simple operation via 6 individual push buttons; 8 movement sequences selectable via the control system - Freely adjustable press time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm - Weight: approx. 1800 kg - Net dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m - Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A) Additional equipment: - Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be deactivated for pressing special parts - 1 set of machine feet (working height 500 mm) Storage location:

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Gannomat Concept 70 Eco Cabinet Press Year of manufacture: 2025 including the following options: - Rapid traverse speed: adjustment speed up to 50 mm/sec - Machine feet (working height 500 mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints during carcass pressing, as well as for drawer production. Brief overview: • Field-proven tolerance compensation (GANNOMAT system) • Two potentiometers for infinitely adjustable pressing force • Minimum pressing force: 300/500 daN (kg) for Concept Eco, minimum pressing force: 600/800 daN (kg) for Concept Primus • Maximum pressing force: 2200 daN (kg) for Concept Eco, maximum pressing force: 3500 daN (kg) for Concept Primus • Three pressing and adjustment speeds: 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely selectable pressing time preset with automatic opening • Concept Eco: Simplest operation via six separate pushbuttons for eight movement sequences • Concept Primus: Simplest operation via LCD display Universal application: • Cabinets, e.g. for furniture and cupboards Ksdpfx Agsvxgrrofelp • Mitered carcases • Carcases with protruding tops • Drawers, drawer boxes • Simultaneous pressing of multiple cabinets / drawers Advantages: • Proven tolerance compensation (GANNOMAT system) • Electromechanical cabinet press with frequency-controlled gear motors • Independently adjustable vertical and horizontal pressing beams • Extended service life thanks to proven, high-quality components • Sturdy and robust construction • Space-saving design • Cabinet pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Easy to operate via straightforward and practical control panel • Fast thanks to beam positioning speeds up to 50 mm/sec (optional) • Efficient due to precise pressing of various carcass sizes • Flexible through adjustable parameters such as pressing force, pressing time, movement speeds • Precise due to angle-accurate pressing of furniture cabinets and drawers • Professional production of cabinets and drawers with a modern cabinet press

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1990, Motors: 2 x 1.85A, 50Hz, 380V, 2800 RPM Kljdev Nptmspfx Agfjp Operating air pressure: 6 bar 30 spindles, diameter 10 mm, mounting Combined foot switch Emergency stop switch Main switch Height adjustment: manual Side adjustment: manual

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW air connection 6 bar fully automatic pneumatic control with foot valve additional switch for "chip removal" program Kodpfev Npw Eex Agfelp T-type drilling head with 7+2 drilling spindles, 32 mm pitch drill shank diameter 10 mm swivels 90°, with locking undercarriage

Būklė: geras (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, Power supply: 380V, 3.3A Motor power: 1.1 kW, 2800 rpm Automatic pneumatic control with control panel Drilling head with 23 spindles, 32 mm pitch Adjustable drilling depth Drill shank: 10 mm Position adjustment: 5–60 mm Clamping height: 80 mm Pass-through width: 800 mm Dimensions: 1200 x 900 mm Weight: approx. 400 kg Includes: 1x template for row drilling 1x template for side stop Klodpfxjq Auwtj Agfep 1x stop guide rail 1500 mm 1x stop guide rail 2000 mm