Ilgaskylė gręžimo staklės, specialiai laiptų gamybai

Ganner / Gannomat Master 325

Sąlyga: geras (naudotas), Gamybos metai: 1998, Universally applicable frame dowel and slot drilling machine with adjustable angle. Specifically designed for stair construction, window manufacturing, and versatile use thanks to pneumatic height adjustment. Fodpfx Aboxmatns Soft Angled doweling and baluster drilling can be easily accomplished with the swiveling drilling unit. - Motor switchable for pole configuration, two speeds - Motor power 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor is started via a convenient handle switch - Equipped with Röhm two-jaw chuck 1 - 20mm - Linear laser for precise workpiece positioning - Drilling unit can be swiveled 65 degrees to the left and right - Pneumatic adjustment of the working height, allowing doweling on two levels without resetting. - Desired drilling heights can be set for each drilling level with a digital counter; switching between levels is done pneumatically from the front. - 340mm lateral adjustment, continuously variable or in 12mm increments, with a toothed rail - Pneumatic clamping possible at any position, operated from the front - Maximum height adjustment approx. 100mm above table height - Drilling stroke approx. 200mm - 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front - 2 swiveling workpiece supports - Extraction funnel - Center stop + 1 lateral stop - Fixed miter stop - Length stop as a round bar - Assorted drills - Operating manual - CE marking - The machine has been partially repainted due to paint splashes. - Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600mm (LxWxH), weight 380kg. The machine can be inspected on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See "more offers from this seller."

Sąlyga: naudotas, Gamybos metai: 2000, with electric height and tilt adjustment Ffedpfx Aovxlq Hsb Set Used, top condition, low operating hours Manufacturer: Altendorf Model: F45 Year of manufacture: 2000 Machine no.: GS-certified Motor: 4 kW Steel guides Carriage length: approx. 3000 mm Cutting width: approx. 1050 mm Tiltable up to 45° Scoring unit preparation Parallelogram guard Table extension Aluminium parts anodised Height adjustment: electric Tilt adjustment: electric Digital display: - Cutting angle - Speed Extraction port: D 120/80 mm Required space: approx. 3010 mm x 1800 mm x 1500 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Sąlyga: naujas, Glass Bead Nailer "2 P Jumbo automatic E.C." – new – Your benefits: - Corner joints are closed - No open glass bead gaps - No color variations when painting - Glass bead frames are easy to allocate Staple Corner Joining Machine 2P Jumbo Automatic E.C. for stapling glass bead frames. Selectable between automatic and manual operation; With angle stop, top and front clamping device Pressure is adjustable independently. Insertion of parallel and stacked staples possible via electronic program control. Stapler can be mounted onto a suitable work table, Operation via foot pedal. ----- Price for this configuration on request! Plus statutory VAT and packaging/shipping costs ----- Pictures show the Staple Corner Joining Machine 2P with the option of a mobile work table (see surcharge details below) Ffedpfx Abjvnh T Nj Sst Surcharges: ----- Mobile work table Height adjustable from 700 – 1000 mm, 2 removable support rails, 1000 mm long each, plus 2 swiveling and slidable support rails, 1000 mm each, all rails covered with felt, 4 castors, 2 of which are lockable. ----- Surcharge: 992.00 Euro net Staples: Packs 15 mm staples (pack of 2,000 pcs.): Price 21.00 Euro 12 mm staples (pack of 3,000 pcs.): Price 31.00 Euro 10 mm staples (pack of 3,000 pcs.): Price 31.00 Euro Dimensions and Weight ----- Jumbo Automatic E.C.: 470 x 370 x 300 mm, 35 kg Work table: 32 kg All prices net. Plus statutory VAT. Ex works, plus packaging and shipping (Technical data according to manufacturer – subject to change without notice!)

Sąlyga: naujas, TC 205 x 1000 Centre Height: 205 mm Swing Over Bed: 410 mm Distance Between Centres: 1000 mm Bed Width: 260 mm Spindle Nose: DIN 55029 (Camlock) 9, Size 6 Cross Slide Travel: 220 mm Top Slide Travel: 125 mm Spindle Bore: 52.5 mm Spindle Speeds: 20 - 3000 rpm Speed Control: Infinitely variable Mechanical Gear Stages: 2 Motor Power: 3.75 kW Fedpfx Aboir If Do Ssft Coolant Pump: 0.13 kW Longitudinal Feed Z: 0.05 - 1.7 mm/rev Cross Feed X: 0.025 - 0.85 mm/rev Whitworth Threads: (45) 2 - 72 TPI Metric Threads: (39) 0.2 - 14.0 mm Diametral Pitch Threads: (21) 8 - 44 DP Module Threads: (18) 0.3 - 3.5 MP Tailstock Quill Diameter: 52 mm Tailstock Taper: MK 4 Quill Stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Machine tool accuracy according to DIN 8605 - Infinitely variable speed control (2 gear stages) - Precision-balanced main spindle - Rigid machine bed with hardened and ground guideways - Monolithic cast iron base - Adjustable precision tapered roller bearings in the main spindle - User-friendly feed gearbox with large feed range running in an enclosed oil bath - Low-maintenance central lubrication - Removable bridge section Scope of delivery: - 3-axis digital readout (resolution 0.005 mm) - 3-jaw chuck - Quick-change tool post with four holders - High rear splash guard and integrated LED trough light - Pull-out chip tray to the front - Slip clutch - Fixed steady rest with ball bearing inserts - Travelling steady rest - Micrometer bed stop - Machine mounts (1 set of 6 pieces) - Two emergency-stop buttons - Foot pedal with double braking system (mechanical and electrical) - Chuck guard, tool post guard, and leadscrew/feed rod cover with safety interlocks in accordance with CE European safety standards - Coolant system - 2 fixed center points - Reducing sleeve for main spindle - Operating tools - Operating tools in tool box - Operating instructions with spare parts list

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Drilling machine for drilling holes in stair stringers, handrails, and balustrades. The drilling unit features height adjustment via spindle with a mechanical digital display (accuracy 0.1 mm). The drilling unit pivots 60 degrees to the left and 60 degrees to the right. Drill holder with collet chuck (high concentricity). Line laser for drilling direction and workpiece positioning. Pneumatic clamping cylinder. Fsdpfevl E Tbjx Ab Ssft Table dimensions: 1000 x 300 mm. Operated via foot pedal. Releasing the foot pedal ejects chips. The machine has been workshop-refurbished and is fully functional. Very compact design.

Sąlyga: naujas, Gamybos metai: 2026, Efektyvus klijų padengimas baldų gamyboje: dylių skylėse ir galinėse grioveliuose, taip pat klijavimas rėmų, langų ir durų gamyboje: dylių skylės, įlaidų ir kaiščių sujungimai. Trumpas pristatymas: • Universalus klijų padengimo įrenginys • Taupantis laiką – paprastas – švarus • Įvairūs purkštukai ir antgaliai • Mobilus Universalios naudojimo sritys: Ffsdpfx Aehnddzjb Sot • Klijavimas dylių skylėse • Klijavimas grioveliuose galinėms sienelėms • Klijavimas briaunų paviršių • Klijavimas bendraminčių paviršių • Klijavimas įlaidų ir kaiščių • Dalių suklijavimas spintoms, korpusams, stalčiams • Dalių suklijavimas rėmams • Dalių suklijavimas langams ir durims • Plokščių ir masyvo komponentų apdirbimas

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Technical description with the following key data: Load capacity: 1000 kg static distributed load Useful lift: 810 mm Closed height: 200 mm Overall height: 1010 mm Platform length: 1300 mm Platform width: 800 mm Material: smooth sheet steel Lifting time approx.: 16 sec. for full useful lift Lowering time: load-dependent Electrical connection: 3 x 400 V/50 Hz + PE, with 16 A CEE plug and 4 meters of cable Ffodegqu A Tjpfx Ab Sjt Motor: 0.75 kW Paint finish: Blue-grey RAL 7031 Power unit location: integrated in lift table Control box: deadman control incl. 2 meters of cable Total weight: approx. 160 kg Standard design: The lift tables comply with EN 1570 E and are CE-marked. The steel parts are cleaned, primed with anti-corrosion primer, and coated with two-component polyurethane paint. The lift tables are standard-equipped with all-round safety contact strips made from aluminum and with maintenance props for repair and service purposes. Our lift tables are designed for approx. 5 cycles/hour at full load for 8 hours/day. For more intensive operations, we offer custom lift tables. Warranty: 1 year on parts for single-shift normal operation, excluding labor costs.

Sąlyga: naujas, Gamybos metai: 2024, Table length 2000 mm Table width 1000 mm Lifting height 400 - 1010 mm Load capacity 300 kg Machine weight approx. 220 kg Description: - Robust support frame for worktops Fodpfx Abov Htkds Ssft - Ergonomic and back-friendly operation thanks to height adjustment via foot pedal - Optimum maneuverability with 4 swivel castors, 2 with locking brakes - Beech multiplex panel 2,000 x 1,000 x 30 mm - 5-year warranty

Sąlyga: naujas, Gamybos metai: 2024, Panhans Mortising Machine Type: 116/10 - Maximum drilling depth: 145 mm - Maximum drilling length: 240 mm Ffjdpfx Aer Eli Tjb Sst - Height adjustment: 135 mm - Extraction port diameter: 100 mm - Colour: RAL 7035 Light Grey, RAL 5000 Violet Blue - Net weight: approx. 200 kg Robust German engineering Professional mortising and precise dowel drilling Fixed table, easy-running movable drilling motor Travel gear for increased mobility Cast iron table 700 x 380 mm, thick-walled and heavily ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, boring depth stop via scale, drilling length can be limited precisely using side stops (left and right adjustable) Drill motor power: 1.3 kW / 1.8 HP with motor brake and practical tool shelf Includes emergency stop button High-precision three-jaw drill chuck, clamping range 5–20 mm Dowel drilling attachment for line boring with notched roller (16, 22, 25 and 32 mm), high-precision milled indexing, fixing via spring-loaded index pin Plug-in frame stop with index bolt for the following positions: Centre, Left, Right CE-compliant GS-certified Includes additional special accessories: - Single-lever operation - Handwheel with dial gauge Location: Ex stock 54634 Bitburg - Immediately available -

Gamybos metai: 2017, Sąlyga: naujas, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm - NEW -: Price ex location including loading! 1 racking unit with 4 uprights: €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided rack uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 100 - Each upright fitted with 2 x 3 height-adjustable arms, 1.20m long, 750kg load capacity per arm - Including bracing approx. 1.30m - Upright height approx. 3500mm, hot-dip galvanized - Base and arm depth 1200mm, each with 3 height-adjustable arms - Load capacity with centre of gravity at 600mm: 750kg per arm / 2,250kg per upright - Supplied with longitudinal and diagonal bracing, bay width = 1,300mm (standard is 1.30m) - Other standard bay widths available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m! - For bay widths from 1.50m, a small extra charge applies in addition to the stated price! Fjdpfx Aboddmtqe Seft - Special dimensions (other upright spacings) are available upon request, subject to an extra charge and longer delivery time as these are custom-made! - If you do not specify a different upright spacing, the racking will be supplied with a bay width of 1.30m. - In this case, the total length for one rack row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors. Other configurations (frame heights, arm lengths, arm types, etc.) available! Please contact us!